Duty Exemption Scheme

C282 Single phase shell
construction motors with
aluminium or cast iron or
sheet metal end covers -
751 Watts & above
OR
Single phase shell
construction motors with
aluminium or cast iron or
sheet metal end covers -
751 watts and
aboveunder SKD
condition
C283 Single Phase
Transformers above
100000 KVA
C47
plates
21 Transfer ribbon for labels/ name
plates
8 sq. inches
1 No. 1 Cold Rolled Non-oriented
(CRNO) electrical steel
sheets/sheets in coil form
19.39 gms/Watt
2 Copper wire
bars/cathodes/rods/winding
wires/strips
1.89 gm/Watt
3 Electrolytic grade aluminium for
rotor
1.63 gms/Watt
4 Commercial grade aluminium in
ingot form (upto 99.5% purity)
for housing
OR
1.63 gms/Watt
4 CRCA Sheets for housing
OR
2.44 gms/Watt
4 Mild Steel sheets for housing 2.83 gms/Watt
5 EN-8 Alloy Steel for shaft 1.18 gms/Watt
6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net)
7 Composite insulation material
consisting of paper, nylon,
polyester, amide, nomex films
1.5% of FOB price
8 Thermal protectors/thermo strips Net to net.
9 Power Capacitor 1 No. (Net to net)
10 Strain relief bush 1 No.
11 Pull chain switch with chord 1 No.
12 Aluminium alloy 0.50 kg
13 Lead wire 1.175 Mtrs
14 Power supply chord 2 Nos.
15 CRCA steel for end shields,
mounting base, Lugs & pads
1.50 kgs
16 Open circuit switch 1 No.
17 Centrifugal gear 1 No.
18 Terminal/ Crimp cap 3 Nos. or 4 Nos. (as
per requirement
quantity to be
accounted for in the
export product)
19 Quick connect/ disconnect
terminals/ receptacles and tabs
with/ without insulation
20 Plastic film for labels/ name
plates
21 Transfer ribbon for labels/ name
plates
1 No. 1 CRGO Steel
laminations/sheets/coil
2 Copper winding wires/ strips/
wire bars/ wire rods/ cathodes
3 Transformer Oil
OR
Transformer Oil Base Stock
3 or 4 sets (as per
requirements quantity
to be accounted for in
the export product)
10 grams
8 sq. inches
0.57 kgs/KVA
0.09 kg/KVA
0.21 kgs/KVA
OR
0.23Kg/KVA.