Duty Exemption Scheme

C281 Single phase shell
construction motors with
aluminium or cast iron or
sheet metal end covers -
181 Watts to 750 Watts
OR
Single phase shell
construction motors with
aluminium or cast iron or
sheet metal end covers -
181 watts to 750watts
under SKD condition
17 Centrifugal gear 1 No.
18 Terminal/ Crimp cap 3 Nos. or 4 Nos. (as
per requirement:
quantity to be
accounted for in the
export product)
19 Quick connect/ disconnect
terminals/ receptacles and tabs
with/ without insulation
20 Plastic film for labels/ name
plates
21 Transfer ribbon for labels/ name
plates
1 No. 1 Cold Rolled Non-oriented
(CRNO) electrical steel
sheets/sheets in coil form
2 Copper wire
bars/cathodes/rods/winding
wires/strips
3 Electrolytic grade aluminium for
rotor
4 Commercial grade aluminium in
ingot form (upto 99.5% purity)
for housing
OR
4 CRCA Sheets for housing
OR
C46
3 or 4 sets (as per
requirements quantity
to be accounted for in
the export product)
10 grams
8 sq. inches
20.76 gms/Watt
2.76 gm/Watt
2.80 gms/Watt
2.80 gms/Watt
4.20 gms/Watt
4 Mild Steel sheets for housing 4.88 gms/Watt
5 EN-8 Alloy Steel for shaft 1.98 gms/Watt
6 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net)
7 Composite insulation material
consisting of paper, nylon,
polyester, amide, nomex films
1.5% of FOB price
8 Thermal protectors/thermo strips Net to net.
9 Power Capacitor 1 No. (Net to net)
10 Strain relief bush 1 No.
11 Pull chain switch with chord 1 No.
12 Aluminium alloy 0.50 kg
13 Lead wire 1.175 Mtrs
14 Power supply chord 2 Nos
15 CRCA steel for end shields,
mounting base, Lugs & pads
1.50 kgs
16 Open circuit switch 1 No.
17 Centrifugal gear 1 No.
18 Terminal/ Crimp cap 3 Nos. or 4 Nos. (as
per requirement
quantity to be
accounted for in the
export product)
19 Quick connect/ disconnect
terminals/ receptacles and tabs
with/ without insulation
20 Plastic film for labels/ name 10 grams
3 or 4 sets as per
requirement quantity
to be accounted for in
the export product