Duty Exemption Scheme

a) LPG (for Supersonic Oxygen
lance in EAF)
b) LDO (or preheating of ladle and
heating of thin slab in tunnel
furnace)
20 kg
c) Natural Gas/ LNG (for Tundish
& SEN heating)
0.25 SCM
Note: 1. This norm is applicable for export product manufactured through Electric Arc. Furnace
(CONARC process) - Thin Slab Caster - Hot Strip Mill.
Note: 2. Quantity of Pig Iron/ Hot Metal and Sponge Iron/ HBI allowed against S. No. 1 shall not exceed
60% and 35% respectively of the total quantity permitted therein.
Note: 3. Import of Silico manganese allowed at S. No. 3 (a) shall not exceed 60% of the total quantity of
import.
Note: 4. Special Ferro Alloy (s)/Metal against S. No. 2 (b) will be allowed only if the respective alloying
elements (s)/ metal is/ are actually present in the export product.
C2004 Black Pipe 1 MT 1 Hot rolled carbon steel strips/
coils/ plates other than high
carbon steel
1.05 MT
C2005 Precision Steel Tubes 1 MT 1 Cold rolled carbon steel strips/
coils/ plates other than high
carbon steel
1.05 MT
C2006 Trumpet Horns
C2007 Rubber Bonded Grinding
Wheel
C2008 Mass Transfer
Equipment / Column
Internals
1 No. 1 CRCA Steel Strip 0.6 x 12
OR
C397
4 kg
1.07 kg/kg content in
the export product
Spring Net to Net
2 CRCA Steel Strip 0.18 x 0.9
OR
1.20 kg/kg content in
the export product
Membrane/ Diapharagm Net to Net
3 Alu-Zinc Steel Strip 1.25 x 118.4
OR
1.22 kg/kg content in
the export product
Housing Net to Net
4 Super Enameled Copper
Wire/Copper Wire
5 ABS Black
OR
Trumpet Net to Net
1 kg/kg content in the
export product
1.05 kg/kg content in
the export product
6 Glue 1% of FOB value of
export
7 Other relevant components As per General Note
No. 4 for Engg.
Product.
1 No. 1 Aluminium Oxide Synthetic,
Silicon Carbide, Depolymerised
1.07 kg/kg content in
export product
1 kg 1 Relevant Stainless Steel Sheets /
plates
1.08 kg/kg Content
2 Relevant Stainless Steel Pipes /
Tubes
1.05 kg/kg Content
3 Relevant Fasteners Net to Net basis
C2009 Carbide Heading Dies 1 No. 1 Carbide Inserts 1 No. (net to net)
C2010 Ferro Titanium (Lumps/
Granules/Powders)
C2011 Nickel Cadmium Pocket
Plate Batteries in
1 Tone 1 Titanium Scrap (containing 85-
95% Ti)
825 kg
2 Ferro Silicon (70-75% Si) 25 kg
3 Steel Melting Scrap 190 kg
1 No. 1 Nickel Hydroxide Powder (45-
65% Nickel + Cobalt)
1.02 kg/kg content in
the export product