Duty Exemption Scheme

C1808 Dish Ends (Ellipsoidal or
Circular Shape) made of
Non-Alloy Steel Plates
C1809 Zinc Builders Hardware
Lacquered/ Powder
Coated (T/C Pressure Die
Cast & Zinc Alloy
conforming to Z-3/Z-5
specification)
C353
upto 30 mg)
5 Lead in wire (Ballotiny filled) 1010 Numbers
6 Getter (P3L5) 0.045 Litres
7 K 18 Lamp Copping Cement 1.55 kg
8 Getter (ALZR) 0.030 Litres
9 Marking Ink 8.750 Grams
1 kg 1 Non-Alloy Steel Plates SA
516/515
1 MT 1 Zinc Ingot
OR
Relevant Zinc Alloy
1.1 kg/kg content of
Steel Plate in the
export product
2 Cylinders with or without key (s) Net to net
3 Plastic Chips for plastic
component such as washers key
holders etc. Polyamite 66/ Nylon
66/ Polyamide 6/ Nylon 6/
Polyacetal/ Delrin/
Polyoxymethylene
4 Machine Screws Net to net
5 (a)Berlaclear CT Laquer OR
Albrilac HB (for Electrophoretic
Lacquer)/ Polyester Powder for
coating
(b) Solvent for Electrophoretic
Lacquer
(c) Rinse additive for
Electrophoretic Lacquer
6 Abrasive Belt 50 mm X 3500
mm for grinding
7 Abrasive Belt 150 mm X 2000
mm for grinding
8 Liquid polishing compound for
polishing Rough Finish
9 Trichloro Ethylene for
degreasing
10 Bar Polishing compound Final
Finish (Pre-polishing compound,
polishing compound Finshing
compound)
11 Polishing Buffs (Pre polishing
Buffs, Polishing Buffs, Finishing
Buffs)
12 Plastic Vibratory Media
1.12 kg/kg content of
Zinc in export
product
1.10 kg/kg content in
export product
1.05 kg/kg content in
the export product
CIF value limited to
4% of FOB of export.
Note: 1. CIF value for import item Nos. 6 to 12 shall be limited to 4% of FOB value of export.
C1810 Scalpel (Surgical Blade
with Plastic handle &
1 No. (7.75
gms.)
1 Cold Rolled Bright Finish
Surgical Stainless Steel Strips
1.687 gms.
cover)
2 Polypropylene/ High Impact
Polystyrene (HIPS)/ Acrylonitril
Butadiene Styrene (ABS)
7.35 gms.
3 Medical Paper As per packing
Policy.
C1811 Harrow Disc Notched 1 kg 1 Alloy/ Non Alloy Steel Billets 1.45 kg