Duty Exemption Scheme

C1745 Hermetically sealed
compressors for airconditioner
using R 22
refrigerant gas of
different capacities
4 Non Alloy Steel Tube. 40.6Kg.
5 Bearing FAG 6200.2 ZR. 8 Nos.
6 Screw/Nut/Bolt/Washer 1.9Kg.
7 Springs. 11Nos.
8 Mechanical Seals. 12 Nos.
9 Hose Assembly with end fittings. 1 No.
10 PVC/Rubber Grips & Pads. 9 Nos.
1 No. 1 Components Net to net basis
except upper and
lower housing
2 a) CRNGO Steel upto 3500 Kcal/hr 0.0032 Kg/Kcal
b) More than 3500 Kcal/hr 0.0024 Kg/Kcal
3 a) Copper Wire upto 3500 Kcal/hr 0.0005 Kg/Kcal
b) More than 3500 Kcal/hr 0.0004 Kg/Kcal
4 a) Music Wire Upto 3500 Kcal/hr 0.000016 Kg/Kcal
b) More than 3500 Kcal/hr 0.000011 Kg/Kcal
5 a) Refrigeration Oil Upto 3500
Kcal/hr
0.0003 Kg/Kcal
b) More than 3500 Kcal/hr 0.0002 Kg/Kcal
6 HR non alloy steel sheet/coils 1.28 Kg/Kg content
7 EC grade aluminium ingot 1.08 Kg/Kg content
C1746 Deleted
C1747 Deleted
C1748 Deleted
C1749 Table, Kitchen & other 1 Kg.
house hold articles made
of aluminium including
anodized with or without
handle irrespective of
what material handle are
made of
rectangular/Square with
straight edges.
1
2
3
Aluminium Scrap
Aluminium Ingot.
Aluminium Sheet/Coils.
1.10Kg/Kg content of
Aluminium in export
product.
1.07Kg/Kg content of
Aluminium in export
product.
1.05Kg/Kg content of
Aluminium in export
product.
In case of anodized export product the purity of inputs allowed i.e. Ingot Sheet/Coils /Circles shall be
99.7% and above.For other shapes rafer C-22
C1750 Vaporizer made of
Aluminium
1 Kg. 1 Aluminium Ingot. 1.05Kg.
C1751 Tyre curing press of all
sizes.
1 No. 1 Non-Alloy HR Plates. 1.10Kg/Kg contnet in
the export product.
2 Components required for the Net to net basis with
export product.
accountability clause.
(1) Specification/capacity & weight of capital goods along with number is to be indicated in the
application.
(2). Net weight of component & sub-assemblies to be imported to be procured indigeneously to be given in
application.
(3). Net weightof components & items to be manufactured from each raw material to be imorted is to be
given in the application.
(4). Weight of component & items to be manufactured from each indigenous material in export product is
to be given in the application.
C340