Duty Exemption Scheme

C1657 Shifted to Electronic
Group
C1658 Valve Seat Insert made of
Alloy Steel of following
Composition:-(i)
Chromium 2, 4-4.8%, (ii)
Molybdenum 0.36-0.72%,
(iii) Tungston 0.5%, (iv)
Nickel: 1.5-4.5%, (v)
Cobalt: 1.6%, (vi) Boron:
0.3%, (vii) Iron and
Carbon: Balance
C1659 Molybdenum Fine Wire
(below 0.5mm Dia)
C322
4249096
36 Ball Holder - 4249107 1No.
37 Ball ZK- 4249099 1No.
38 S.S. tube Sleeve- 4249105 1No.
100 Kg. 1 Chromium Metal
OR
3.86Kg
1 High Carbon Ferro Chrome
(chromium Content of 52-60%)
OR
7.02KG.
1 Low Carbon Ferro Chrome
(chromium content of 65-70%)
OR
5.67kg.
2 Ferro Molybdenum
(Molybdenum content of 60-
70%)
0.85Kg
3 Ferro Tungsten (with Tungsten
content of 75%)
0.67Kg.
4 Nickel pellets/Shots 3.06Kg.
5 Cobalt 1.6Kg.
6 Boron 0.3Kg
7 Melting scrap of mild steel 86.8Kg.
1 Kg 1 Molybdenum Wire (above
0.8mm Dia)
1.08Kg.
C1660 Ratchet Wheel Plates 1 Kg 1 SS Sheets/Coils made of AISI
304 Grade (HR)
1.50Kg.
C1661 Oil Pressure Switch for 1 No. 1 Spring 1No.
Motor vehicle
2 Body 1No.
C1662 Rod Thermostate of
Different size
3 Diaphragm 1No.
4 Rivet Contact 1No.
5 Relevant Screw 1 No. on net to net
basis
1 No. 1 MS Terminal Screw 2Nos.
2 Plastic Base 1No.
3 Plastic Cover 1No.
4 Brass Base Plate 1No.
5 Invar Rod of relevant size 1No.
6 Brass Top Plate 1No.
7 Ceramic Striker 1No.
8 Brass Pillar Terminal 1No.
9 Brass Clibration Nut. 1No.
10 Berilium Copper Switch Blade 1No.
11 Silver Contact fixed 1No.
12 Brass Pillar Terminal 1No.
13 Plastic Knob 1No.
14 Silver Contact Moving 1No.