Duty Exemption Scheme

C1531 Pneumatic Tools-Hand
Drill without Muffler
with chuck 3/4" X 3 3/4"
(19mm X 95.2mm)
c) Eureka Wire/Rods Net +2% Wastage
8 Magnet Centre Core Net to net
9 Coil Former 1No.
10 Mumetals Permaloy Strips &
Components thereof
C293
Net to net
11 Pointers/Pointer Arms Net to net
12 Tant Bands/Ligaments Net to net
13 Barllium
Copper/Phospher/Bronze Strips
Net +5% wstage
(Qty. resctricted to
20gms)
14 Aluminium Die Castings Net to net
15 Bimetallic Springs 2Nos.
16 Springs Steel Strips Net to net
17 Transistors, Capacitors, IC's &
other electronic components not
covered by other inputs entries
Net to net
18 Yoke 1No.
19 Hybride Circuits 1No.
20 Zener Diodes 2No.
21 Yoke Holder 1No.
22 Lower Boss/under Boss 1No.
1No. 1 Relevant Inlet bushing 1No.
2 Relevant Hose Tail 1No.
3 Relevant Throttle Lever 1No.
4 Relevnt Rear Valve Seat 1No.
5 Relevant Front Valve Seat 1No.
6 Relevant Valve 1No.
7 Relevnt Handle Bare 1No.
8 Relevnt Throttle Valve Bushing 1No.
9 Relevant Bolt 2No.
10 Relevant Pawl 2No.
11 Relevant Ratchet Ring 1No.
12 Relevant Cylinder 1No.
13 Relevant Piston 1No.
14 Relevant Cylinder Bushing 1No.
15 Relevant Retainer Plate 1No.
16 Relevant Chuck 1No.
17 Relevant Chuck Sleeve 1No.
18 Relevant Front Head 1No.
19 Relevant Plunger Shifter 1No.
20 Relevant Shifter Sleeve 1No.
21 Relevant Retainer Sleeve 1No.
C1532 Pnumatic Tools-Hand 1No. 1 Relevant Inlet Bushing 1No.
Drill with Muffler and 2 Relevant Hose Tail 1No.