Duty Exemption Scheme

C1524 Pneumatic Tool-Clay
Digger/Utility Hammer
(Picks) Latch Retainer
with Chuck 7/8"hex X 3
1/4" (22.2 mm X 82.6
mm) with muffler.
C1525 Pneumatic Tool-Balancer
with balance capacity
upto 75 1b (34.1Kg)
8 Relevant Throttle Valve 1No.
9 Relevant Retainer Latch Pin 1No.
10 Relevant Valve 1No.
11 Relevant Piston 1No
12 Relevant Upper Valve case Lid 1No.
13 Relevant Lower Valve case Lid 1No.
14 Relevant Valve case 1No.
15 Relevant Back Head Bolt 2Nos.
1 No. 1 Relevant Cylinder 1No.
2 Relevant Sleeve 1No.
3 Relevant Retiner Latch 1No.
4 Relevant Latch Bushing. 1No.
5 Relevant Handle & Bush
Assembly
C287
1No.
6 Relevant Lever Chit 1No.
7 Relevant Lever Pin 1No.
8 Relevant Throttle Valve 1No.
9 Relevant Retainer Latch Pin 1No.
10 Relevant Valve 1No.
11 Relevant Piston 1No.
12 Relevant Upper Valve case Lid 1 No.
13 Relevant Lower Valve case Lid 1No.
14 Relevant Valve Case 1 No.
15 Relevant Back head Bolt 2Nos.
16 Relevant Hook Muffler complete 1 No.
1No. 1 Relevant Main Spring Anchor 1No.
2 Relevant Bearing Ball 1No.
3 Relevant Drum Cable Assembly 1No.
4 Relevant Gear Worm 1No.
5 Relevant Shaft-Worm Gear 1No.
6 Relevant Retainer Ball (Thrust) 1No.
7 Relevant Race Retainer 1No.
8 Relevant Ball race 1No.
9 Relevant Worm 1No.
10 Relevant ball Bearing 1No.
11 Relevant Guide Plate 1No.
12 Relevant Stop Shield 1No.
13 Relevant Housing Cable Drum 1No.
14 Relevant Stop Assembly 1No.
15 Relevant Hook Assembly Swivel 1No.
16 Relevant Cover 2Nos.
17 Relevant Hub-Main spring 1No.
18 Relevant Assembly main spring 1No.