Duty Exemption Scheme

4 Metallurgical Coke 0.13 kg
5 Inoculant 25C & equivalent 0.004 kg
6 Paints & Rust Preventive Oil 0.010 kg
Note: In the case of Machined Castings the above quantities of import items at each Sl.No. 1 to 5 are to be
multiplied by factors as given below:
a) Less than 10 kg/piece - 1.36
b)10 kgs. to 100 kgs/ piece - 1.25
C1468 Stainless Steel Dye
Springs made Out of
AISI 316 or AISI 304
C1469 Cistern Side Inlet valve,
Cistern Bottom Inlet
Valve, Cistern Outflow
Valves
C1470 Deleted.
C1471 Finished Cup
(Component of Tapered
Roller Bearing)
C1472 Split Retaining Rings of
Cabbon Steel
1 kg. 1 Stainless Steel Wire (AISI 316 or
AISI 304) of relevant Diameter
C272
1.02 kg
1 kg. 1 St.Steel Rod 1.02 kg/kg content in
the export product
2 Polyacetal 1.15 kg/kg content in
the export product
3 Polypropylene 1.15 kg/kg content in
the export product
1000 Nos. 1 Forged/ Turned Outer Ring in
unfinished condition (relevant
size)
1 kg. 1 Carbon Steel plates of relevant
Grade
1100 Nos.
1.05 kg
(Galvanised) 2 Zinc 4% of the net weight
of Steel in the export
product.
C1473 Split Retaining Rings of
Stainless Steel in SS 516
or 340
C1474 Deleted
C1475 Compressor Mounting
Brackets/Hanger
Brackets/ mounting
Spring Brackets/
Overload Brackets
C1476 Locating Cup/Muffler
Assembly (Suction/
Discharge/ Shockloop
Assy./ Protective Cover
Bale Strap/ Discharge
Valve retainer
C1477 Phosphor Copper
C1478 Manganese Copper
1 kg. 1 Stainless Steel of relevant Grade 1.05 kg.
1 kg. 1 CRCA Sheet/ Coil (prime/
Defective)
1 kg 1 CRCA Sheet/ Coil (Prime/
Defective)
1.30 kg/kg content in
the export product
1.25 kg/kg content in
the export product
1 kg. 1 Copper Cathodes/ Copper Wire
Bars
0.875 kg
OR
Copper Scrap
0.9026 kg
2 White/ Yellow Phosphorous 0.154 kg
1 kg. 1 Copper Cathodes/ Copper Wire
Bars
0.707 kg
OR
Copper Scrap
0.735 kg
2 Manganese 0.303 kg
C1479 Alloy Aluminium 1 kg. 1 Primary Unalloyed
Conductor Steel a) Aluminium 1.02 kg/kg content in