Duty Exemption Scheme

of Automotive & Non-
Automotive application,
Machined cast
components for valves
internals including
casing,
impellers,discs,plugs,
yoke sleeves, Yoke
bushes,seals, spacers and
bearing, Hexagonal nuts,
earthing clamps, spindle,
stems, wedges, seat rings
etc. manufactured out of
Silicon brass/Silicon
Bronze/high tensile brass
or with copper and
alloying elements, like
Zinc varying from 10-
35% and other elements
like Aluminium,
Manganese, Silicon, Iron
Lead each not exceeding
5% conforming to ASTM
B584-C87500, C87600,
C87610/ASTM B371
C1377 Machined cast bushings
of Automotive & Non-
Automotive application,
Machined cast
components for valves
internals including
casing, impellers, discs,
plugs, yoke sleeves, Yoke
bushes, seals, spacers and
bearing, Hexagonal nuts,
earthing clamps, spindle,
stems, wedges, seat rings
etc. manufactured out of
Aluminium Bronze or
with coper and alloying
elements like Aluminium
8 to 11% and Iron 1.5 to
3.5 conforming to BS
1400-AB1/ASTM B 148-
C95200, C95300/DIN
1714 GCUAL 10 FE.
C1378 Writing Boards made of
coated Steel Sheet
Surface
C258
Aluminium, Lead, Manganese
and Silicon
1 kg. 1 Aluminium Bronze ingots OR
Copper Cathode with alloying
element Aluminium
1.20 kg/kg content in
the export product
1 No. 1 Coated Steel Sheet Surface 1.02 kg/kg content in
the export product
2 Galvanised Steel Sheet 1.02 kg/kg content in
the export product
3 Aluminium Section 1.02 kg/kg content in
the export product
4 ABS Moulding Powder 1.05 kg/kg. content in
the export product
C1379 Brush Gear Assembly 1 No. 1 Carbon Brushes of relevant 4 Nos.