Duty Exemption Scheme

C722 M.S. Bucket Handle Duly
plated with nickel or
Copper or Zinc/Powder
Paint Coated
C723 MS Colour coated
Ghamala(made of HR
Sheet)
2 Low Carbon Wire Rod 1.12 kg/kg of net
content in the export
product
3 Nickel 0.01 kg/kg of the
steel to be plated
1 kg 1 M.S. Wire Rod 1.05 kg.
2 Nickel
0.97% of weight of
Steel to be Nickel
OR
Plated.
OR
Zinc
0.97% of weight of
Steel to be Zinc
OR
Plated.
OR
Copper
0.97% of weight of
Steel to be Copper
OR
Plated.
OR
Powder Paint 0.97% of weight of
Steel to be Powder
Painted
1 MT 1 H R Sheets 1.16 Tonne
C724 MS Drum 1 kg 1 CRCA Sheet 1.050 kg
C725 MS Paper pin & Clip 1 kg 1 M.S. wire 1.05 kg
C726 MS Washer 1 kg 1 CRCA/H.R. Mild Steel Sheets/
Strips/Coils (including seconds
and defective).
1.50 kg
Note : 1. In case, the export product is Hot Dip galvanised, in addition to above items, an additional item
Zinc shall be allowed @ 4% of net weight of Steel in the export product. In case the product is
electroplated, Zinc shall be
allowed @ 1% of net weight of steel in export.
C727 MS Window, Door
Ventilator, Grate/ Grills,
Fabricated Frames and
components thereof
1000 kg 1 Non Alloy Steel Billets 1070 kg
C728 Needle Roller Bearing 25
mm to below 50 mm I.D.
1000 Nos. 1 Steel strips 25CrM04/RST3/
CK15/C15M/ equivalent
57.42 kg.
2 Steel wire SAE
2100/100CR6/SUJ2/ equivalent
60.19 kg.
3 Miscellaneous Items: Grinding upto 5% of FOB
Wheel, Work Rest Blade, Green
Silicon Carbide, Rust Preventive
Chemical, Molykote DX,
Packing Grease, Carbide Tips, O
Rings, Oil Seals, Rubber Wheels,
Lubricating Oils, Vulcolon,
Polishing Compound, Soda Ash
& Caustic Soda
value of exports.
C729 Needle Roller Bearing
Type BK/ HK/SCE/SCH
below 25 mm I.D.
1000 Nos. 1
2
Steel Strips to
25CrM04/RST4/RST3/ CK
15/CI15M/ equivalent
Steel wires to SAE
52100/100CR6/ SUJ2/equivalent
19.25 kgs.
5.60 kgs.
3 Steel cage 1100 Nos.
4 Misc. Items: Grinding Wheel, upto 5% of FOB
C148