Duty Exemption Scheme

Teeth Plaque removing
Brush:
Rack
Please see Note below C-608
C608 Components of Electric
Teeth Plaque removing
Brush: Rack Pin/Pin (Big
& small).
C133
1.5 mm thick (AISI 416 T)
1 Kg 1 Stainless Steel Rods/Coil upto
1.5mm thick (AISI 416 T).
Note: In respect of norms covered by Sl.Nos. 605 to 608 : above Relevant consumables in the form of
Chemicals IA/IM/IC Solution of cutting tools (a) Collet for automat (b) Guide bush (c) Carbide form
cutter (HOBB) and (d) Carbide drill and twist drill will be allowed upto 20% of the FOB Value.
C609 Components of
Electronic Home plaque
removing instruments:
Drive Gear
C610 Components of Steel
Drum namely Body
Sheets/ Circles made of
CRCA
C611 Copper Bottom Stainless
Steel Kitchenwares
1 Kg 1 Stainless Steel Rod 2.4 mm to
4.8 mm
2 Misc. items in the form of
chemicals IA/IM/IC solution and
cutting tools (a) Collet for
Automat (b) Guide Bush (c)
Carbide form cutter (Hobb) and
(d) Carbide drill & Twist Drill
2 kg
4.9 Kgs
CIF Value limited to
20% of FOB value.
1 MT 1 CRCA Steel Coils 1.05 MT/MT content
of CRCA Steel in
export product.
1 kg 1 CR Stainless Steel Sheets/Coils
AISI 304
1.125 kg/kg of net
content in the export
product
2 Copper Ingot/Rods 1.02 kg/kg of net
content in the export
product
C612 Copper utensils 1 kg 1 Copper scrap 1.020 kg
C613 Corner Arm (Galvanised) 1 kg. 1 Mild Steel HR Sheets/ Strips/
Coils
1.921 kg
2 Mild Steel Rounds 0.344 kg
C614 Crank Drive of
Cryogenic Pumps
3 Zinc 0.040 kg
1 No. 1 Needle Bearing MR 48 SS Bore
76.2 MM
Net to net.
2 Needle Bearing MR 22 SS Bore
34.8 MM
Net to net.
3 Roller Bearing NUP 308 Bore 40 Net to net.
MM WT-725 Gms.+/-10%
tolerance limit
4 DU Bush 48 DU 72 Net to net.
5 DU Bush PAP 4030 Net to net.
6 Vari Seal Net to net.
7 SS H.T. Bolts Net to net.
8 Spring Washer Net to net.
9 Nolos Rings Net to net.
C615 CRCA Butt Hinges 1 kg 1 CRCA sheet/coil 1.0823 kg
C616 CRCA Ghamellas
with/without handle
made of CRCA
Sheet/M.S. Wire Rod
1 MT 1 CRCA Sheet of relevant gauge 1.16 kg/kg content in
export product.
2 M.S. Wire Rod of relevant
diameter
1.00 kg/kg content in
export product.