Duty Exemption Scheme

Sheets/Strips/Wide coils, the quantities of imported inputs will increase which may be obtained by
multiplying the given quantities by a factor of 1.16.
C527 Stainless Steel
Wires/Ribbon.
1000 kgs 1 a) Stainless Steel Wire Rods
OR
1060 kgs
1 b) Stainless Steel Wire of dia 1.2
mm and above for redrawing of
thinner wire of dia 1 mm and
below.
OR
1020 kgs.
1 c) Stainless Steel Wire of dia 0.7
mm and above for redrawing of
thinner wire of dia 0.25 mm and
below.
1020 kgs.
2 Dry Drawing Lubricant/ coating 9 Kgs
3 Wire Drawing Soap 8 Kgs
4 Tungston Carbide Dies 1 No
5 Wet Drawing Lubricant/ coating 4 Kgs
6 Diamond or Blanks/ Compax
dies
7 (a) Used/ New Plastics/ Steel
Bobbins/ Spools
OR
(b) ABS/ Polystrene for making
Plastics Bobbings/ Spools
C124
4 Nos
300 Nos
8 Inconel Pipes/ Tubes 2 kgs.
1.05 kg/kg content of
Plastic Bobbins/
Spools in the export
product
Note No.1. Import of items at Sl. No. (5) (6) & (7) shall be allowed against export of stainless steel wires of
size below 1.6 mm only.
C528 Steel Earthing Wire 1 kg 1 Non-Alloy Steel Wire Rod 1.00 kg
(Gavanized) 2 Zinc 0.04 kg
C529 Deleted.
C530 1"Flexible Tubing 1 kg 1 Low carbon M.S. defective
sheets/ coils
C531 1/2" Flexible Tubings 1 kg 1 Low carbon M.S. defective
sheets/ coils
C532 1/2" to 3" Galvanised
Flexible Conduits
C533 2" Bungs with or without
Washer/Gasket
C534 2" Flanges with or
without Washer/Gasket
C535 2" Galvanised flanges
with rubber gaskets
1.05 kg
1.047 kg
1 kg 1 Low Carbon M.S. Defective
Sheets/ Coils
1.052 kg
2 Zinc 0.04 kg
1 No 1 Hot/Cold Rolled Steel
Sheet/Coil/Strip
2 Gaskets
OR
Gasket Tube of relevant length
1 No 1 Hot/Cold Rolled Steel
Sheet/Coil/strip
2 Gaskets
OR
Gasket Tube of relevant length
1.4696 kg/ kg wt. of
steel in export
Net to Net
Net +2% wastage
2.10 Kg /kg wt of
steel
Net to net
Net + 2% wastage
1 HR/CR Sheets/ Coils/ Strips 2.10 Kg/Kg wt. of
steel (ungalvanised)in
the export product
2 Synthetic rubber namely
SBR/PBR/Nitrile/EPDM
0.700 Kg/Kg wt of
Gasket in the export
product