Duty Exemption Scheme

olling mill rolls and tungsten carbide ring i.e. Item at Sl.No.3 (ii) (b) will not be allowed. Similarly, against
export of Rolled Blooms, Billets, Slabs, refractory items 3(iii)(a&b) shal not be allowed. However, in case
of export of rolled products including billets produced out of continuous cast blooms/ billets both item
mentioned above i.e. rolls/ tungsten carbide rings and refractories shall be allowed.
3. Items of import at Sl.No.1 (c) (2), 3 (ii) (b),(c), (d), (h) and 3 (iii) (a&b) shall not be permitted against
export of Ingots.
4. The item Non Alloy Steel Melting Scrap will be allowed as per the definition given in Section XV of
Customs Tariff.
C515 Non-alloy steel wire 1000 Kgs 1 Major Input comprising of:
(uncoated)
a) Non Alloy Steel melting 360Kgs.
scrap/Direct Reduced Iron
(HBI/Sponge Iron)
b) Low Silica lime stone 218 Kg
c) Metallurgical coke (with ash
content below 15%)
2 Additives comprising of:
C113
i) Cored wires/ lumps/ powder of
calcium silicide (CaSi)
ii) Silico Manganese
OR
a) Ferro Silicon
b) Ferro manganese
610Kg.
iii) Raw Petroleum coke 22.46 Kgs
3 a)
iv) Cored Wires/ Scrap/ Ingots/
Shots of aluminium
v) Copper Scrap/ Copper
Cathode/ Copper Wire
Bar/Copper Rod(if copper is
actually present in the export
product)
vi) Cored wire of lead/ lead shots
(in case of export of lead bearing
free cutting steel only)
Refractories and Misc. Items:
i) Graphite Electrode
ii) Rolls/ Tungsten Carbide rings
for rolling mill
iii) Copper lined mould for
casting
iv) Saw/ shear blade
v) Ceramic coated lancing pipe
vi) Temperature tips/ Celox
inserts
vii) Sampler tips
viii) Submerged tuyers/Oxygen
lance pipe/Oxygen Supersonic
lance/tip.
ix) Atmospheric injector
x) Stainless Steel hoses
xi) Refractory items comprising
of:
a) Runner Mass for Mini Blast
Furnace/ Castable for Mini Blast
0.04 kgs
2.5 kgs