Duty Exemption Scheme

Stainless Steel Bars &
Rods (including Rounds,
Flats, Hex- agons,
Octagons, Wire rods,
Cold twisted deformed
bars, thermo mechnically
treated reinforcing Bars)
Angles, Shapes and
Sections (including
beams, Joists, Channels,
special profiles), Plates
Sheets/Strips/wide Coils,
Blooms, Billets, Slabs,
Ingots, wires, pipes and
tubes, Skelp, Rails and
Sleeper
C110
present in the export product)
ii)Copper Plates/Micro alloyed 0.1 kg
copper plate (for use in copper
lined casting moulds)
iii)Furnace Oil/LSHS/Naptha 13 kgs
2 MAJOR INPUTS:
i)Non-Alloy Steel Melting Scrap 330 kgs
ii)Pig Iron 31.774 kgs
iii)Low silica lime Stone 620 kgs
iv)Coking Coal
1000 kgs, 700Kgs.
OR
Low Ash Metallurgical Coke
(LAM Coke)
Metallurgical Coke 700 kgs
3 i)ADDITIVES:
a) Cored wires/scraps/ shots/ingots
of aluminium
1.466 kgs
b) Ferro Niobium 0.035 kg
c) Ferro Vanadium 0.004 kg
d) Ferro Silicon/ Ferro Manganese/
Silico Manganese/ Other ferro
Alloy(s) (including Nickel Oxide
Sinter/Ferro Nickel/Charge
chrome provided the alloying
elements is/are actually present in
the export product.
17.00 kgs
e) Calcium Silicide (CaSi) 1.5 kg
f)Raw Petroleum Coke 2.3 kgs
3 ii) MISC.ITEMS:
a)Silicon Carbide Grains 2.0 kgs
b)Rolls/Tungsten Carbide rings 1.77 kgs
for Rolling Mill
c)Celox Inserts/Oxygen 0.004 kg
measuring probes
d)Thermodynamic elements 0.325 kg
e)Magnesia Reagent/
Desulphurisation Compound
0.006 kg
f)Silica Gel/Mobile Sorbead 0.010 kg
g)Freon Gas-142/114(Net of
Cylinders)
0.010 kg
h)Stainless steel Hoses 0.007 kg
i) shear Blades/Saw Blades 0.010 kg
j) Oxygen Lance pipes 0.750 kg
k)Rolling Mill Oil 0.500 kg
l)Casting Powder 2.083 kg
m)Temperature Tips 0.022 kg
n)Canned Elements/Pearmeable
elements for combined blowing
o)Graphite electrodes (only those
having VADR facilities)
0.200 kg
1.000 kg