Duty Exemption Scheme

C109
sleeves/ slidegate plates steel other than
stainless steel
d) Direct bonded basic bricks
e) EBT tubes/Mass/Bricks
f) Monolithic/gunning/ramming
mass/castables
g) Dolomite/magnesia carbonbricks
13 Other Ferro alloys including
nickel oxide, sinter, ferro nickel,
charge chrome provided the
alloying element(s) is/ are
actually present in the export
product.
14 Casting Powder 2 Kgs
15 Saw/Shear blade 0.01 Kgs
16 Copper scrap/Copper
Cathode/Copper Wire
Bar/Copper Rod (if copper is
actually present in the steel)
0.04 Kgs
17 Furnace oil (for captive power
plant)
70 Kgs
18 Furnace oil for oil fired reheating 50 Kgs
furnace in the rolling mill
19 Furnace oil for ladle heating 6 Kgs
20 Lubricant/Gear oil (for captive
power plant)
0.65 Kgs
21 Low silica Lime Stone 100 Kgs
22 Cored wire/scrap/ingot of
aluminium
1 Kg
23 Cored wire of lead/lead shots (in
case of export of lead bearing
steel only)
2.5 Kgs
24 Raw Petroleum Coke 5.0 Kgs
25 Ceramic coated lancing pipe 1 Nos
26 Temperature Tips 0.5 Nos
27 Sampler Tips 0.25 Nos
(Qty. in kgs. as in
formula 4 of Note 7
below)
1. The item Non Alloy Steel Melting Scrap will be allowed as per the definition given in Section XV of
Customs Tariff.2. The above norms are applicable only if the export product(s) is manufactured through
Gas/Coal based sponge iron-Electric Arc Furnace/ Induction Furnace route using iron ore as the basic raw
material
3.The item at Sl. No.(6) would not be allowed If export product(s) are manufactured through gas based
sponge iron route and the items at Sr. No.(3) (4) & (5) would not be allowed if export product(s) are
manufactured through coal based sponge iron route
4. In case of export product(s) manufactured through induction furnace route, the item at Sr.No.(7)will
not be allowed.5. In case of continuous cast billtes/blooms/slabs produced through continuous casting
route, rolling mill rolls and Tungsten carbiderolls, item at Sl.No.(9) will not be allowed. Similarly, against
export of rolled blooms, billets, slabs, refractories item at Sl.No. 12(a)(b)(c) shall not be allowed, however,
in case of export of rolled produced out of continuous blooms item mentioned above i.e. rolls/Tunsten rings
and refractories shall be allowed.
Import of item at Sr.No. (9)(10)(12)(a)(b)(14)(15)&(18) shall not be permitted against export of
ingots.7)Formula:1) 5.5 x (mean average of % silicon content in Steel)(mean average of Manganese
content in Steel)
C512 Non Alloy/Alloy/ 1000 kgs 1 i)Copper Cathode/Copper Wire 0.04 kg
Bar/Copper Rods (if copper is