Duty Exemption Scheme

C104
d)Saw/Shear Blade 0.01 kg
e)Ceramic coated lancing pipe 0.25 No.
f)Temperature Tips/Celox inserts 0.05 No.
g)Sampler tips 0.05 No.
h)Submerged tuyers/ Oxygen 0.77 kgs
lance pipe /Oxygen Super Sonic
lance /tip.
i)Atmospheric injector 4 kgs
j)Casting Powder 2 kgs
k) Silica Texture bellow Shroud 0.0052 kg
iii)WIRE DRAWING MISC.
ITEMS:
a)Dry drawing lubricant 8 kgs
b)Wire drawing soap 7 kgs
c)Wet drawing lubricant 4 kgs
d)Tungesten carbide dies 5 Nos.
e)Plastic bobbins/spools 300 Nos.
iv)REFRACTORY ITEMS: 10 Kg
a)Runner Mass/castable for Mini
Blast Furnace (MBF)
b)Graphite Carbon refractories
for Mini Blast Furnace (MBF)
c)Magnesia reagent/
Desulphurisation compound
d)Zirconia /Magnesia Nozzles
e)Aluminium Graphite
Nozzles/Monobloc
Stopers/Stoper heads/ Stoper
Rods/Shrouds
f)Porous Plugs/seat
Blocks/Sleeves/Slide Gate Plates
g)Direct Bonded basic Bricks
h)EBT Tube/Mass/Bricks
i)Monolithic/Gunning/ Ramming
Mass/Castables
j)Dolomite Magnesia Carbon
Bricks
Note 1. The above norms is applicable only if the export product(s) is/ are manufactured through Mini
Blast Furnace-Electric Arc Furnace route using liquid hot metal as the principal raw material in Electric
Arc Furnace.
2. Import of item atSl.No.3 (iii) (c), (d) and (e) shall be allowed against export of wire of size below 1 mm
dia only.Import of Directo Reduced Iron shall be limited to 10% of total metallic input of 360Kg.
Mentioned at item 2(a).
C507 Non alloy steel
1000 kgs 1 Major Inputs comprising of:
Galvanised Wires (From
a) Non Alloy Steel Melting Scrap 1200 Kgs
melting scrap)
b) Low Silica Lime Stone 95 kgs
2 Additives comprising of :
a) Cored Wires/ Lumps/ Powder of
Calcium Silicide (CaSi)
b) Silico Manganese