Duty Exemption Scheme

2 Dry Drawing Lubricant/ Coating 8 kg
3 Tungsten Carbide dies 5 Nos.
4 Wet Drawing Lubricant 4 kg..
5 Plastic/ Steel Bobbins/ Spools Net to net.
6 Relevant Metal for coating/
Plating
C103
45 kg
7 Lead (for Patenting) 3 kg
Note: Import of items at Sl. No.4 shall be allowed against export of wet drawn steel wires of size below
1.6mm only.
C505 Hot Rolled Galvanized
Non alloy steel
Sheet/hoops &
Strips/Wide Coils
C506 Non alloy steel
Galvanised wire
1 kg 1 Non alloy hot rolled Steel Sheets/ 1.05 kg
Coils
2 Zinc 0.04 kg
1000 kgs 1 a) Copper scrap/Ingots (if copper is
present in the export product)
0.04 kg
b) Zinc 40 kgs
c) Lead 3.3 kgs
d) i)Furnace Oil (only for units with 30 kgs
captive power plants)
ii)Lubricant (only for units with
captive power plant)
0.65 kg
1 e) i)Furnace oil for oil fired
reheating furnace in rolling mill
50 kgs
ii) Furnace oil for ladle heating 6 kgs
1 f) Cored wire of lead/lead shots (in
case of export of lead bearing
free cutting steel sheet only)
2 MAJOR INPUTS :
2.5 kgs
a) Non Alloy steel Melting
scrap/Direct Reduced Iron
(HBI/Sponge Iron)
360 kgs
b) Low Silica Lime Stone 218 kgs
c) Metallurgical Coke 610 kgs
3 i)ADDITIVES
a) Cored wires/lumps/powder 1 kg
of Calcium Silicide (CaSi)
b) Silico Manganese
OR
16 kgs
i) Ferro Silicon 6 kgs
ii) Ferro manganese 10 kgs
c) Raw Petroleum coke 5 kgs
d) Cored wires/scrap/ingots/ shots
of aluminium
ii)MISC. ITEMS:
1 kg
a)Graphite Electrode 6 kgs
b)Rolls/Tungsten Carbide rings
for rolling mill
c)Copper lined mould/ Copper
mould for casting
1.77 kgs
0.013 kgs