Duty Exemption Scheme

ENGINEERING PRODUCTS 

Sl. No. Export Item Quantity Import Item Qty. Allowed 

C1 All Aluminium 

Conductor (Bare) 

C2 Aluminium Alloy 

extruded Products 

including Rods and Bars 

1 MT 1 Aluminium Wire Rod 

OR 

1.01 MT 

Aluminium Ingot / Billets 1.04 MT. 

1 kg 

1 Aluminium Alloy Billets 

OR 

1.01 kg. 

1.a) Aluminium Ingots/ T 

Bars/Sows 

OR 

1.02 kg 

a) Aluminium Scrap 

1.04 kg 

b) Copper Scrap 1.05 kg 

c) Silicon 1.05 kg 

d) Zinc Scrap 1.05 kg 

e) Manganese 1.05 kg 

f) Any other Metal - X 1.05 kg 

2 Powder for Coating 0.02 kg/kg content in 

export product 

3 Tool & Die Steel 4% of FOB Value 

Note: 1 The quantity allowed above is per kg. net content of the material in the export product. The actual 

composition should be furnished by the applicant. 

Note: 2. In case, the item of export is Anodised, an additional item " Stannous Sulphate" @ 1.04 kg/kg net 

content of the material in the export product will be allowed. 

Note: 3. Powder for coating shall be allowed only if export product is powder coated. 

C3 Aluminium Alloy Ingots. 1 kg 1 Aluminium Scrap 

1.03 kg 

OR 

Aluminium Ingot 

1.01 kg 

2 Copper Scrap 1.05 kg 

3 Silicon 1.05 kg 

4 Zinc scrap 1.05 kg 

5 Manganese 1.05 kg 

6 Any other metal - X 1.05 kg 

7 Magnesium 1.05 kg 

Note: 1 The Quantity allowed above is per kg net content of the material in the export product. The actual 

composition should be furnished by the applicant. 

C4 Aluminium artware 1 kg 1 Aluminium Scrap 1.075 kg 

C5 Aluminium Circles/Slugs 1 kg 1 Aluminium Ingots with minium 

Purity of 99.5% 

1.10 kg 

OR 

OR 

Aluminium Scrap 

1.13 kg 

C6 Aluminium Collapsible 

Tubes with or without 

Plastic Cap 

1 kg 1 Aluminium Slug 1.050 kg 

C7 Aluminium Conductor 

Steel Reinforced (ACSR) 

1 km 1 Aluminium Wire Rod 

OR 

C1 

1.01 kg/kg content in 

the export product 

Aluminium Ingot / Billets 1.04 kg/kg content in 


2 a) High Carbon Steel Wire/Rod 1.02 kg/kg content in 


b) Zinc 4% of weight of Steel

C2 

OR content 

2 Galvanized High Carbon Steel 

Wire 



Note:1. The export product will indicate the weight of different items per kilometer.Note : The above item 

at Sl. No. 4 is allowed as an alternate item to item No. 2 & 3. 


XLPE Insulated, 

GI/Copper Wire 

Armoured, PVC 

Sheathed Cable for 

600/1000 Volts - 2 x 25 sq. 

mm 

C9 Aluminium Conduit 

Bodies made of 

Aluminium and other 

alloying constituents 

C10 Aluminium Extrusions/ 

Aluminium Profiles 

C11 Aluminium Flexible 

Tubing 

C12 Aluminium Foil 

commercial grade 

embosed/non embosed , 

cut to shape, performed , 

with /without coating 

with/without printing, 

with/without reinforcing 

material 

1 km 1 Aluminium rods (EC Grade) or 

Aluminum Ingots 

140.56 kgs 

2 XLPE Compound 31.08 kgs 

3 PVC Resin 133.00 kgs 

1 kg 1 Aluminium Ingot 1.030 kg/kg content 

in export 

1 MT 1 Aluminium Scrap 1.05 MT 

1 kg 1 Aluminium Ingots 1.05 kg 

1 kg 1 a) Aluminium foil stock temper soft 0.850 kg 

or hard in coils or reels 

b) Polyester, copolymer & 

polythylene food grade granules 

0.3195 kg 

c) Solvent soluble Dyestuff 0.0023 kg 

d) Synthetic Resin 0.0089 kg 

e) Adhesives OR Aluminium foil 

Reel/Coils 

0.0045 kg OR 

1.15Kg. 

Import item No. 1 (c) shall be permitted only when export producted is printed.Import item Nos. 1(b), 1(d) 

& 1(c) shall be allowed only when export product is with reinforcing material. 

C13 Aluminium Foil paper 

backed 

C14 Aluminium Foil plastic 

coated/ laminated 

C15 Aluminium Foil printed 

C16 Aluminium Foil- 

Synthetic Resin/ Lacquer 

1 Kg 1 Aluminium Foilstock 

OR 

1.10 Kg/Kg of 

Aluminium content 

in export. 

1 Aluminium Ingot 1.20 Kg/Kg of 


in export 

2 Relevant paper 1.05 Kg/Kg of paper 

content in export. 


OR 

0.9995 Kg 

1 Aluminium Ingot 1.07 Kg 

2 Polyester Co-polymer 0.17 Kg 

3 Synthetic Resin 0.0089 Kg 

4 Adhesives 0.0045 Kg 


OR 

1.10 Kg 


2 Dyestuff 0.0023 Kg 


OR 

1.075 Kg 

1 Aluminium Ingot 1.102 Kg

coated printed 

C17 Aluminium Foil- 

Synthetic Resin/Lacquer 

2 Resin 0.086 Kg 

3 Dyestuff 0.0105 Kg 

1 Kg 1 Aluminium Foil Stock 

OR 

C3 

1.075 Kg 

coated 1 Aluminium Ingot 1.102 Kg 

C18 Aluminium Foil plain 1 Kg 1 Aluminium Foilstock 

OR 

1.10 Kgs 


C19 Aluminium Helicalformed 

fittings 

C20 Aluminium Pencil 

Sharpner 

1 kg 1 Aluminium Ingot 

OR 


1 No. 1 Aluminium Ingot 

OR 

1.05 kgs. 

1.10 kgs. 

1.042 Kg/Kg weight 

of Aluminium 

content in the export 

product 

1 Aluminium Scrap 1.06 Kg/Kg wt. of 


in export product 

2 Steel blades for pencil sharpner 

OR 

Net to Net 

2 High Carbon Steel Strips 1.10 Kg/Kg wt. of 

Steel content in 


3 Brass Scrap 1.075 Kg/Kg of the 

brass content in the 


C21 Aluminium rivets 1 kg. 1 Aluminium wire 1.000 kg 

C22 Table, Kitchen and other 

house hold articles made 

of aluminium including 

anodized with or without 

handle irrespective of 

what material handle are 

made of (other than those 

covered under SION at 

1 kg 1 Aluminium Scrap 1.22 Kg/Kg content 

of Aluminium in 

export product. 

2 Aluminium Ingot 1.18 Kg/Kg content 



3 Aluminium Sheet/Coils 1.15 Kg/Kg content 



Sl.No. C-1749) 4 Aluminium Circle 1.07 Kg/Kg content 



C23 Aluminium Utensils with 

Interior PTFE Coating & 

Exterior Coating 

Material as Silicon and or 

PTFE base (Non stick) 

with/without handle. 

1 kg 1 Aluminium Scrap 

OR 

1.15 kg/Kg content of 

Aluminium in the 


1 Aluminium Ingots 1.10 kg/Kg content of 

Aluminium in the 


2 PTFE Non-Stick coating material 0.128 Ltr/Sq. Mtr of 

internal coating area 

3 High Temp. Resistance Coating 

material as Silicon and/or PTFE 

Base 

0.128 Ltr/Sq. Mtr of 

external coating area 

4 Bakelite Moulding Powder 1.05 kg/kg content in 


Note : 1. Item No. 4 to be allowed only if exported with handle. 

2. Item No. 3 will be allowed only if the export product is painted. 

C24 Aluminium Wire Rod 1 kg 1 Aluminium Ingot in the form of 

Pigs/Sows/Slabs 

1.03 kgs. 

C25 Cable Needle 1 kg 1 Aluminium Rod/Wire 1.05 kg/kg content in

(Aluminium) 

C26 Crochet Hook 

(Aluminium) 

C27 Aluminium/Aluminium 

Alloy Cast Articles 

Including Parts & 

Components 

C28 Re-Rollable Aluminium 

Strips/Coils 

C29 Rolled Aluminium Plates, 

Sheets, Strips including 

Corrugated aluminium 

sheets/ strips 

C30 Stitch holders 

(Aluminium) 

C31 B.B. Cup set of 3 (Weight 

100 gms) 

C32 Ball Racer cone 1 kg of 

Content of 

Import Item 

C33 Ball Racer set of 3 

(Weight: 42 gms for item 

1 ) 

C4 

the export product. 

1 kg 1 Aluminium Rod/Wire 1.05 kg/kg content in 


1 kg 1 Aluminium scrap 

OR 


1 kg 1 Primary Aluminium in the form 

of pigs/Sows/Slabs/T-Bars 

OR 

1 Aluminium Scrap 0.25 kg 

1 kg 1 Aluminium Scrap 

OR 

Primary Aluminium Ingots in the 

form of Pigs/Sows/Slabs/T-Bars. 

1.10 kg/kg of 


in the export product 

1.06 kg/kg of 



0.80 kg 

1.045 kg 

1.02 kg 



1 set 1 HR Sheet/ coils 

(seconds/defective) 

195 gms 

1 HR Sheets /Coil 1.60 kg 

1 set 1 HR Sheet/Coil 


75 gms 

C34 BB axle (Weight 235 gms) 1 Piece 1 M.S./ Non-alloy steel round/ rods 282 gms 

C35 BB Cup(Set of 2) 


1 ) 

C36 BB Ring (Weight: 18 gms 

for item 1 ) 

C37 BB set of 7 for one piece 

crank (Weight 216 gms) 

C38 BB set of 9 for one piece 

crank (Weight 292 gms) 

C39 BB Shell (Weight: 247 

gms for item 1 ) 

C40 Bicycle Bell (Weight: 178 

gms for item 1, 16 gms 

1 set 1 CRCA/HR Sheets/Coils 

(Seconds/defective) 

1 piece 1 HR Sheet/Coil 


1 set 1 CRCA/ HR/ Sheet/ coils 


1 set 1 CRCA/ HR/ Sheet/ coils 


1 piece 1 CRCA/HR Sheet/Coil 




159 gms 

35 gms 

421 gms 

569 gms 

331 gms 

214 gms 

for item 2 ) 2 MS Rounds/Rod 19 gms 

C41 Bicycle Mirror (Weight: 

34 gms for item 1, 57 gms 

for item 2, 66 gms for 



44 gms 

2 MS Rounds/Rod 60 gms 

item 3 ) 3 Plastic/Polystrene 69 gms 

C42 Bicycle Stand (Weight: 

1013 gms for item 1, 76 



1317 gms 

gms for item 2 ) 2 MS Rounds/Rod 82 gms 

C43 Bicyle Side Stand 1 piece 1 CRCA/HR Sheet/Coil 305 gms

(Weight: 231 gms for 

item 1, 242 gms for item 2 

) 

C44 Brake set (Weight: 539 



item 3) 

C45 Brake Shoe (Set of 2) 


1, 4 gms for item 2, 35 

2 


MS Rounds/Rod 266 gms 

1 set 1 CRCA/HR Sheet/coils 


C5 

771 gms 

2 M.S. Round/ rod 65 gms 

3 a) Carbon Black 18 gms 

b) Synthetic Butyl Rubber 42 gms 

1 pair 1 CRCA/HR Sheet/Coil 


31 gms 


gms for item 3) 3 Carbon black/natural/ Synthetic 

rubber 

C46 Brake Stirrup (Weight: 


1 set 1 CRCA/HR Sheet/Coil 

(Seconds/Defective) 

36 gms 

182 gms 


C47 Brake Tube (Weight: 46 




54 gms 


C48 Bridge Clip for 

mudguard (Weight: 19 


C49 Caliper Brake set 


item 1, 308 gms for item 

2, 64 gms for item 3 and 

44 gms for item 4) 

C50 Carrier (Weight: 1136 




24 gms 

1 Set 1 CRCA/HR Sheet/Coil 


1004 gms. 

2 MS/Non-alloy Steel Rounds/Rod 370 gms. 

3 Polypropylene 67 gms. 

4 Carbon black/natural/Synthetic 

rubber 



45 gms. 

1500 gms 


C51 Chain Adjuster (Weight: 

6 gms for item 1, 21 gms 



7 gms 

for item 2) 2 MS Rounds/Rod 23 gms 

C52 Chain Guard(Steel) 


1 ) 

C53 Chain Stay (Weight: 350 


C54 Chain(110 Links) 








149 gms 

382 gms 

444 gms 

item 1, 81 gms for item 2) 2 MS/Non-alloy Steel Rounds/Rod 95 gms 

Note : 1. In case of chains exported with lesser or higher links than 110 links, weight of export/import 

items to be reduced/increased proportionately. 

C55 Chainwheel & Crank 





686 gms. 

2 MS/Non-alloy Steel Rounds/Rod 1061 gms 

2, 73 gms for item 3) 3 When cranks are plastic coated 

:Polypropylene 

C56 Chainwheel (Weight: 352 1 piece 1 CRCA/HR Sheet/Coil 


77 gms 

686 gms


C57 Complete Bicycle without 

accessories and with 

Tyres and Tubes-22" and 

24" Frame (Net weight 17 

kg) 

1 No. 1 HR/CRCA Sections/ 

defective/sheets/ plates/coils/ 

strips 

C6 

13.5 kgs 

2 MS Rounds/Non Alloy Steel 

Rounds/bars/ wire rods 

3.69 kgs 

3 Brass scrap 0.34 kg 

4 Unwrought Zinc for galvanising 

& plating 

0.04 kg 

5 Nickel Cathodes / Ingots / Pellets 0.072 kg 

6 Synthetic butyl rubber for rubber 

parts 

7 Polypropylene/ Polystyrene/ 

PVC compound for components 

OR 

7.a)Polyol 

b)Isocynate 

8 Other inputs for tyres and tubes 

OR 

Tyre & Tube (in pair) 

0.06 kg 

0.40 kg 

0.100 kg 

0.066 kg 

As indicated in the 

detailed list of norms. 

9 Components: 

(i)Any component from the 

component list when imported 

will be allowed on net to net 

basis. However, entitlement of 

raw materials used for 

manufacture of the components 

will be deducted from 

thecumulative list of raw 

materials indicated as 

above.(ii)Any combination of the 

following components on net to 

net basis for bicycles with special 

features. 

Net to net 

a) Deraillers system 

b) Coaster Hub Brake 

c) Dynamo with head and/ or tail 

light 

d) Reflectors 

e) Decals 

f) One piece crank 

Note: 1. Entitlement of inputs for complete bicycle having lower weight will be worked out on prorata 

basis. Normally, bicycle having weights above 17 kg are not exported. However if weight of Bycycle 

exceeds by 10% i.e. upto 18.70 kg the same may also be considered by the RLA on pro-rata basis.2. If the 

bicycle is exported with moulded P.U. Saddle, the import of Polyol & isocynate to the extent of 100 gms 

and 66 gms respectively per Saddle shall be permitted. Correspondingly, the quantity of the input at Sl.No. 

7 viz. PVC Compound/ Polypropylene/ Polystyrene shall be reduced by 158 gms. The description of 

resultant product shall be accordingly amended to read as "Bicycle with P.U. Saddle". 

C58 Cotter Pin - Set of 2 




4 gms 

1, 40 gms for item 2) 2 MS Rounds/Rod 44 gms 

C59 Derailleur(Front) 




245 gms 

item 1, 26 gms for item 2) 2 MS Rounds/Rod 38 gms 

C60 Derailleur(Rear) 1 piece 1 CRCA/HR Sheet/Coil 


621 gms


item 1, 65 gms for item 2) 

C61 Double Chain wheel & 

Crank (Weight:675 gms 





C7 

1262 gms 


item 2, 73 gms for item 3) 3 When cranks are plastic coated: 

Polypropylene 

C62 Expander Bolt (Weight: 7 




77 gms 

8 gms 


C63 Fork (Weight: 1061 gms ) 1 piece 1 CRCA/HR Sheet/Coil 


C64 Fork Crown Cover 


1 ) 

C65 Fork Fitting (Weight: 108 




1 Set 1 CRCA/HR Sheets/Coils 


1263 gms 

21 gms 

259 gms 

for item 2) 2 MS Rounds/Rod 44 gms 

C66 Fork Guard (Pair) 




89 gms 

1, 652 gms for item 2 ) 2 MS Rounds/Rod 717 gms 

C67 Fork Guard Clamp 


1 ) 

C68 Frame (Weight: 3000 gms 

) 

C69 Frame Cup Set of 2 


1 ) 

C70 Frame Lock (Weight: 143 










89 gms 

3450 gms 

47 gms 

185 gms 


C71 Frame Lugs Set of 3 


item 1 ) 

C72 Frame Pipe Set of 4 


item 1 ) 

C73 Frame Top Bar Pipe 


item 1 ) 

C74 Free Wheel (single speed) 








1 piece 1 CRCA/HR Sheets/Coils 


262 gms 

1482 gms 

332 gms 

259 gms 

item 1, 99 gms for item 2) 2 MS/Non-alloy Steel Rounds/Rod 160 gms 

C75 Front/ Back Mudguard 1 kg 1 M.S. CRCA sheet/ coil/ strip 

including seconds/ defectives but 

excluding coated 

C76 Full Chain Cover 




1.10 kg 

1108 gms 

item 1, 4 gms for item 2 ) 2 MS Rounds/Rod 5 gms 

C77 Half Chain Cover 1 piece 1 CRCA/HR Sheet/Coil 641 gms




C78 Handle Bar (Weight: 869 





1156 gms 


item 3) 3 Polystyrene/PVC 42 gms 

C79 Handle Lever(pair) 


item 1 ) 

C80 Handle Stem (Weight: 


1 pair 1 MS Rounds/Rod 344 gms 



C8 

341 gms 


C81 Hub Axle(Front) 


1 ) 

1 piece 1 MS/Non-alloy Steel Rounds/Rod 102 gms 

C82 Hub Axle(Rear) (Weight: 1 piece 

126 gms for item 1 ) 


C83 Hub Cone( Rear) 


1 ) 

1 pair 1 MS/Non-alloy Steel Rounds/Rod 22 gms 

C84 Hub Cone(Front) 


1 ) 

1 pair 1 MS/Non-alloy Steel Rounds/Rod 16 gms 

C85 Hub Cup ( Rear) 


1 ) 



39 gms 

C86 Hub Cup (Front) 


1 ) 



28 gms 

C87 Hub(Front) (Weight: 88 


1 Piece 1 CRCA/HR Sheet/Coil 


114 gms 

for item 2) 2 MS/Non-alloy Steel Rounds/Rod 120 gms 

C88 Hub(Rear) (Weight: 229 




297 gms 

for item 2) 2 MS/Non-alloy Steel Rounds/Rod 293 gms 

C89 Lamp Bracket (Weight: 




96 gms 

C90 Mudguard(pair) (Weight: 1 pair 


1 CRCA/HR Sheet/Coil 


1026 gms 

gms for item 2) 2 MS Rounds/Rod 258 gms 

C91 Multispeed Free Wheel 




913 gms 


2) 


C92 One Piece Crank 


item 1 ) 


C93 Paddle Pair made out of 

Polypropylene (Net 

1 Pair 1 Non Alloy Steel Bar/Round for 

Axle 

350 gms 

weight 450 gms per pair) 2 MS Defective Sheet/Coil for 31.5 gms

C9 

Washer 

3 Polypropylene 98 gms 

4 Acrylic Reflectors 4 Nos./Padle Pair 

weighing 19 gms 

Note : 1. In case the net weight of the PP Bicycle Paddle is varying, the inputs will be worked out on prorata 

basis. 

C94 Pedal Axle (Weight: 2 




for item 2 ) 2 MS/Non-alloy Steel Rounds/Rod 107 gms 

C95 Pedal Cone (Weight: 4 



C96 Pedal Cup (Pair) 


1 ) 



23 gms 

C97 Pedal Plate (2 pieces) 


1 ) 



30 gms 

C98 Pedal Stretcher Bar (2 

pieces) (Weight: 27 gms 

for item 1 ) 

1 set 1 MS Rounds/Rod 28 gms 

C99 Pedal Tube (Weight: 17 




18 gms 

C100 Pedal(pair) (Weight: 165 




214 gms 



item 3) 3 Carbon black/ natural/Synthetic 

rubber 

295 gms 

C101 Plastic Chain guard 


1 ) 

1 piece 1 Polypropylene 30 gms 

C102 Pump (Weight: 254 gms 




279 gms 

item 2 ) 2 MS Rounds/Rod 13 gms 

C103 Quarter Chain Cover 




315 gms 


C104 Rim(pair) (Weight: 2233 




2568 gms 

C105 Saddle (Weight: 400 gms 




456 gms 



3) 

158 gms 

3 PVC Compound 

OR 

3.(a) Polyol 

(b) Isocyanate 

3 gms 

100 gms 

66 gms 

1 a) Panel 112 Nos 

b) Funnel 112 Nos 

Note: If the export product is of moulded P.U. Saddle, the import of Polyol and Isocyanate as indicated 

shall be permitted instead of P.V.C. compound 

C106 Saddle Nose (Weight: 30 1 piece 1 CRCA/HR Sheet/Coil 

37 gms 

(seconds/defective)


C107 Saddle Strip (Weight: 236 


C108 Saddle Wire set of 3 


item 1 ) 

C109 Screw Racer (Weight: 27 


C110 Seat Axle (Weight: 39 


C111 Seat Clip (Weight: 142 


C112 Seat Pillar(5") (Weight: 


C113 Seat Plate (Weight: 145 


C114 Seat Rivet (11 pieces) 


1 ) 

C115 Seat Stay (Weight: 171 


C116 Spanner 13 Hole 


1 ) 

C117 Spanner Set of 3 pieces 


item 1 ) 

C118 Spare Crank (Weight: 



C119 Spokes Set of 72 pieces 


1, 611 gms for item 2, 105 



C10 

260 gms 




48 gms 

1 piece 1 MS Rounds/Rod 43 gms 







156 gms 

89 gms 

197 gms 








186 gms 

158 gms 

167 gms 


2 When Cranks are Plastic 

Coated:Polypropylene 



77 gms 

43 gms 


gms for item 3) 3 Brass 113 gms 

C120 Steel Balls (Set for 

complete bicycle) 


1 ) 

C121 Steel Pedal(pair) 


item 1, 200 gms for item 2 

) 

C122 Triple Chain wheel & 

Crank set (Weight: 764 



item 3) 

1 Set 1 MS/Non-alloy Steel Rounds/Rod 69 gms 



440 gms 




1428 gms 


3 When cranks are plastic coated: 

Polypropylene 

77 gms 

Note:1. Entitlement of inputs will be calculated on the basis of net weight of different inputs in the export 

product. Ratio of inputs will be as per above standard input output norms. 

2. In case of bicycle productsto be Nickel Plated, the Nickel will be allowed at the rate of 1% of the net

weight of the steel to be Nickel Plated. 

3. Zinc will be allowed at the rate of 3% of the net weight of the parts to be galvanised. 

4. Paints, preparationchemicals and thinner will be allowed at the rate of 1.08% of the net weight of the 

parts to be painted. 

5. Plating salts will be allowed at the rate of 2% of the net weight of the parts to be plated. 

6. Packing Material will be allowed as per the packing policy. 

7. However if weight of Bicycle components exceeds by 10%, the same may also be considered by RLA on 

pro-rata basis. This note is applicable to SIONs at Sr. Nos. C-31 to C-56, C-58 to C-92 and C-94 to C-122 

8. In all the above export products, the net weight of different items as per the above standard norms shall 

be indicated alongwith the export obligation to be imposed. 

C123 11 KV Heat Shrinkable 1 No. 1 Hot melt adhesive 375 gms 

Dry type indoor 

termination for Switch 

2 Electrolytic grade copper 99.9% 

purity in Rod/Tube form 

725 gms 

gear with line in Boot for 

3 Self amalgamating EPR 6 mtrs 

XLPE cable 240 mm. sq. 

Insulating Tape 

4 Heat Shrinkable Medium Wall 

tubing size 140/42 mm 

255 mm 

5 Anti Tracking Heat Shrinkable 

whether insulation tubing size 

42/19 mm 

1.9 mtr 

6 Heat Shrinkable Stress control 


800 mm 

7 Heat Shrinkable (small Size) 

Anti tracking wheather resistant 


1 Mtr. 

8 Anti tracking wheathering 

resistance 3 - way breakout/ 

trifurcating gloves for HV 

Termination (Large size ) HS 

1 No. 

C124 11 KV Heat Shrinkable 1 No 1 Hot Melt Adhesive 370 gms 

Dry Type Indoor 

Termination for 



600 gms. 

Switchgear with in line 

3 Self Amalgamating EPR 6 Mtrs. 

Boot for XLPE Cable 

Insulating tape 

185sq mm. 

4 Heat Shrinkable medium wall 


250 mm 

5 Heat Shrinkable anti tracking 

insulating tubing size 42/19 mm 

1.7 Mtrs. 

6 Anti Tracking Weathering 

resistance 3 way breakout 

trifurcating gloves for HV 

terminations 

1 No. 


tubing size 20/45 

800 mm 

8 Heat Shrinkable Conduting 

Tubing size 24/65 mm 

600 mm 

C125 11 KV Heat shrinkable 1 No 1 Hot Melt Adhesive 500 gms 

Dry Type outdoor 

termination for XLPE 

2 Electrolytic grade copper 99.9 

purity in Rod/ tube form 

850 gms 

cable size 3 X 185 mm. 

3 Self Amalgamating EPR 6 Mtrs 

sq. 


4 Anti-Tracking Heat shrinkable 

Anti-tracking Insulating Tubing 

size 42/19 mm 

3 Mtrs 

5 Heat Shrinkable stress control 

Tubing size 45/20 mm. 

800 mm 

C11

C126 11 KV Heat shrinkable 

Dry Type outdoor 

termination for XLPE 

cable size 3 X 95 mm. sq. 

C127 11 KV Heat Shrinkable 

Straight through joints 

suitable for 3 x 185 - 240 

sq. mm 


Straight Through Joints 

for XLPE Copper Cable 

size 3 x 240 sq. mm. 


Transition joints suitable 

for connecting 240 sq.mm 

XLPE to 300 sq.mm 

PILC cable & 185 sq.mm 

XLPE cable with 300 

sq.mm PILC Cables 

1 No 1 Hot Melt Adhesive 500 mm 

2 Electrolytic Grade copper 99.9 


3 Self Amalgamating EPR 


C12 

870 mm 

4 mtrs. 

4 Anti Tracking Wethering 3 way 

breakout / trifurcating Gloves for 

HV Terminations (Large size) 

HS 

1 No 

5 Heat shrinkable medium wall 


255 mm 

6 Heat shrinkable Anti-tracking 

Insulating Tubing 32/14 mm 

3 mtrs. 

7 Heat shrinkable stress control 


800 mm 

1 No. 1 Heat Shrinkable Breakout 2 Nos 


Tubing 

3 Mtrs 

3 Mastic Compound Tape (Anti 

Tracking) 

1.320 kgs 

4 Spacer Tape 4.0 Mtrs. 

5 Stress Control Mastic Tape 4.8 Mtrs. 

6 Heat Shrinkable Thin Wall 

Tubing 

3.20 Mtrs 


Tubing 

1.80 Mtrs. 

8 Heat Shrinkable Conducting 

Tubing 

3.0 Mtrs. 

9 Heat Shrinkable Anti Tracking 

Tubing 

3.28 Mtrs. 

1 No 1 Hot melt adhesive 500 gms 

2 Electroiytic grade copper 99.9 


900 gms 

3 Self Amolgamating EPR 

Insulating tape 

10 mtr 


tubing size 140/42mm 

1995 mm. 

5 Heat shrinkable Stress cantrol 


3 Mtr 

6 Heat Shrinkable conducting 

tubing 95/45 mm 

3 Mtr 

7 Heat Shrinkable Anti tracking 

Insulation tubing size 42/19 mm 

3 Mtr 

1 No. 1 Heat Shrinkable Breakout 2 Nos. 

2 Heat Shrinkable Stress Control 

Tubing 

2.60 Mtrs. 

3 Mastic Compound Tape (Anti 

Tracking) 

1.450 kgs 

4 Spacer Tape 4.0 Mtrs. 

5 Stress Control Mastic Tape 3.83 Mtrs. 

6 Heat Shrinkable Thin Wall 

Tubing 


Tubing 

3.23 Mtrs. 

1.75 Mtrs.

C130 11 KV mass impregnated, 

paper insulated, lead 

alloy sheathed steel tape 

armoured Aluminium 

conductor conforming to 

IS:692/73 240 sq.mm 3 

Core 

C131 11 KV mass impregnated, 

paper insulated, lead 

Alloy sheathed steel tape 

armoured Aluminium 

conductor conforming to 

IS:692/73 120 sq.mm 

3Core 

C132 11 KV Straight Through 

Joints for XLPE Copper 

Cable size 3 x 95 Sq. mm. 

C133 11 KV, Indoor Vacuum 

circuit Breaker Panels 

C134 Deleted 

C135 19/33 KV 3 Core X 400 

sq.mm.aluminium 

conductor XLPE 

insulated, steel wire 

armoured, PVC Sheathed 

cable conforming to IS: 

7098/II/85 400 sq.mm.3 

Core 

C136 Deleted 

C137 33 KV Insulator as per 1 No. (4.70 

IS-9431 

kgs Approx) 

8 Heat Shrinkable Conducting 

Tubing 


Tubing 

1000 Mtrs. 1 EC Grade Aluminium 

Bars/Rods/Ingots. 

C13 

3.21 Mtrs. 

3.0 Mtrs. 

2024.00 kgs. 

2 Cable insulating paper 731.04 kgs. 

3 Cable impregnating compound 551.17 kgs. 

4 Lead 4270.86 kgs. 



1012.00 kgs. 

2 Cable Insulating Paper 525.20 kgs. 

3 Cable impregnating compound 423.24 kgs. 

4 Lead 2947 kgs. 

1 No 1 Hot Melt Adhesive 500 gms 

2 Electrolytic Grade copper 99.9% 


3 Self amalgamating EPR 

insulating Tape 


tubing size 115/34 





7 Heat shrinkable Anti-Tracking 

weathering Insulating Tubing 

size 42/19 mm 

8 Heat shrinkable contucting 


860 gms 

10 mtrs 

1995 mm 

3 mtrs 

3 mtrs 

2.25 mtrs 

2 mtrs 

1 No. 1 Vaccum Interruptor 3 Nos. 

2 Contact Strips and Rings 3 Nos. 

3 Bearing HFL 2026 1 No. 

4 Bearing HF 2016 1 No. 

5 Bearing HK 2010 1 No. 



3373.34 kgs. 

2 XLPE Compound (Semi- 

Conducting and Insulating 

Grade) 

3642.73 kgs. 

3 PVC Resin 3771.43 kgs. 

4 Firrat Tape(semi-conducting 

swellable tape) 

90.42 kgs. 

1 Epoxy Resin (Liquid) 0.797 kg 

2 Hexa Hydro Phthalic Anhydride 0.637 kg

C14 

(HHPA)(Haroner) 

3 Benzyl Diethuamine 0.014 kg 

4 Release Agent QZ-13 0.010 kg 

C138 40 W Twin Tube Box 1 No. 1 CRCA Sheet 2.5 kg. 

Type Industrial Fitting 

duly Pre wired with 

Vaccum Pressure 

2 

3 

Ballast 

Holders 

2 Nos. 

4 Nos. 

impregnated copper 

4 Capacitors 1 No. 

wound open type Ballast, 

Power Factor 

Improvement Capacitor, 

Starter, Starter Seat, 

Mains Terminal and 

Lamp Holders. 

5 Starter 2 Nos. 

C139 600/1000 V Heat 1 No. 1 Hot melt adhesive 470 gms 

shrinkable straight joints 

for cable size 4 X 240 



760 gms 

mm. sq. 



6 Mtrs 



1 length of 1700 mm 



1200 mm 






630 gms 

mm. sq. 



4 mtrs 






800 mm 






850 gms 

mm. sq. 



4 mtrs 




5 Heat Shrinkable tubing size 

35/12 mm 

750 mm 



for cable size 4 X 70 mm. 



690 gms 

sq. 



4 mtrs 






600 mm 

C143 600/1000 V Heat 1 No 1 Hot melt adhesive 280 gms 

shrinkable straight joints 2 Electrolytic grade copper 99.9% 


700 gms


sq. 

C144 600/1000 V Heat 



sq. 

C145 600/1000 V Outdoor 

overhead termination 

complete with cable lugs 

& Armour clamping ring 

for 4 core copper cable 4 

X 240 mm. sq. 

C146 600/1000 V Outdoor 

Overhead termination 




X 120 mm. sq. 

C147 600/1000 V Outdoor 

Overhead termination 




X 120 mm. sq. 

C148 600/1000 V Outdoor 







C15 

4 mtrs 

1060 mm 

500 mm 

1 No 1 Hot melt adhesive 200 gms 





550 gms 

3 mtrs 



1060 mm 



750 mm 

1 No. 1 Hot melt adhesive 400 gms 



800 gms 



8 mtrs. 



3375 mm 



300 mm 



320 mm 

7 4-way cable breakout for LV 

Termination (Medium size) 

1 No. 




600 gms 



6 mtrs. 



3772.5 mm 



210 mm 


size 15/30 mm 

320 mm 




600 gms 



6 mtrs 



3772.5 mm 



210 mm 



320 mm 

7 4-way cable breakout for LV 

termination (Large size) 

1 No 


Overhead termination 2 Electrolytic grade copper 99.9% 


700 gms




X 25 mm. sq. 

C149 Deleted 

C150 Accessories of Electrical 

Measuring Instrument: 

Shunts 

C151 Electrical Actuators for 

Electrical Switches 

C152 Adopters made of Brass 

Strip ( for electric lamps) 

C153 All Aluminium Solid 

single Core Conductor to 

BS-2627H8 in coil form 

C154 Aluminium Conductor #6 

and #3 Duplex Phase - 

AC SR Neutral 





5 Anti-tracking Heat Shrinkable 

Medium Wall tubing size 50/16 

mm 



7 Heat Shrinkable 4-way cable 

breakout for LV Termination 

(small size) 

C16 

5 mtrs 

3920 mm 

210 mm 

200 mm 

1 No 

1 No 1 Duralumin Rods, Free Cutting 

Aluminium rods, Capillary 

Tubes 

Net + 2% wastage 

2 Copper Bars/ Strips Net + 2% wastage 

3 Manganin Wire/ Rods Net + 2% wastage 

4 Eureka Wire/ Rods Net + 2% wastage 

1 No. 1 One or More of the following 

relevant synthetic resin : 

a) Polyester 1.05 kg/kg of the net 

content of the 

relevant item in the 


b) Nylon 66 

c) ABS 

d) Polycarbonate 1.05Kg/Kg content in 


2 Relevant Zinc Alloy Ingot 1.05 Kg/Kg content 

in the export product. 

3 Brass Strip 1.33Kg/Kg content in 


4 Relevant Diodes. Net to net. 

5 Relevant Resistors Net to net. 

6 Brass Rod 1.1 kg/kg content in 


7 Silver Epoxy and Epoxy Resin CIF value of these 

item together shall be 

restricted to 1% of 

FOB 

1 MT 1 Brass Strips of relevant gauge 1.10 MT/MT content 

in export 

1 MT 1 Aluminium Wire Rod/Ingot 1.01 MT 

1 kg 1 Aluminium Wire Rod/Ingots 1.01 kg/kg content in 


2 H.C. Steel Wire Rods 1.05 kg/kg content in 


3 Zinc Unwroght Unalloyed 4% of steel content in 

export 

4 XLPE Compound 1.05 kg/kg content in 

export product

C155 Auto Transformers above 

100000 KVA, 3 Phase 


25000 KVA upto 63000 

KVA, 1 Phase 


25000 KVA upto 63000 

KVA, 3 Phase 


63000 KVA upto 100000 

KVA, 1 Phase 


63000 KVA upto 100000 

1 No. 1 CRGO Steel 

laminations/sheets/coil 

2 Copper winding wires/ strips/ 

wire bars/ wire rods/ cathodes 

3 Transformer Oil 

OR 

C17 

0.29 kgs/KVA 

0.16 kg/KVA 

0.40 kgs/KVA 

3 Transformer Oil Base Stock 0.44 kgs/KW 

4 Phenolic Resin bonded paper 0.046 kgs/KVA 

5 Pre Compressed Press Board 0.05 kg per KVA 

6 Press Board Moulding 1 Set (Net to net) 

7 Motorised Off Load/ on Load 

Tapchanger 






OR 

1 No. (Net to net) 

0.43 kgs/KVA 

0.2 kg/KVA 

0.42 kgs/KVA 




6 Press Board Moulding 1 Set per Job 


Tapchanger 

1 No. per Job 



0.47 kgs/KVA 



0.23 kg/KVA 


OR 

0.68 kgs/KVA 






Tapchanger 

1 No. per Job 



0.44 kgs/KVA 



0.015 kg/KVA 


OR 

0.35 kgs/KVA 






Tapchanger 




0.37 kgs/KVA 

KVA, 3 Phase 2 Copper winding wires/ strips/ 0.2 kg/KVA

C160 Electrical Wiring 

Accesseries/components 

wholly made of Brass 

C161 Brass Strips for 

Electrical/ Electronics/ 

Telecommunication/ 

Defence application and 

radiators for automobile 

application. 

C162 Cast Resin Parallel 

Branch joints Box 

suitable for 4 x 185 

sq.mm main cable and 

two branches of 4 x 185 

sq.mm, 

XLPE/SWA/PVC, 

600/1000 V cable 

C163 Cast Resin Parallel joints 

Box suitable for 4 x 300 

sq.mm main cable and 

two branches of 4 x 300 

sq.mm, 

XLPE/SWA/PVC, 

600/1000 V cable 

C164 Cast Resin Straight joints 


sq.mm, XLPE 

/SWA/PVC, 600/1000 V 

cable 

C18 



OR 

0.55 kgs/KVA 






Tapchanger 


1.0 kgs 1 Brass Scrap 1.075 kgs 

1 Kg. 1 Zinc having minimum purity 

99.95% 

2 Copper wire bars having 99.9% 

minimum purity 

1.05 Kg per Kg. 

content in export 

product 

1.05 Kg per Kg. 


product 

1 No. 1 Synthetic Resin (To be specified) 18.345 kgs 

2 Isocynate/Poly Isocynate 

(Hardner) 

6.115 kgs 

3 Catalyst 0.247 kg 

4 High Impact Polystyrene 

Granules 

8.530 kgs 

5 Ethylene Propylene Rubber (EPR 0.215 kg 

insulating tape) 

6 Mastic Sealing Tape 0.205 kg 

7 Thermofit Sleeve 0.880 Mtrs 

8 Copper wire/rod 2.980 kgs 



(Hardner) 

11.430 kgs 



Granules 

11.08 kgs 

5 Ethylene Propylene Rubber (EPR 0.215 kg 







(Hardner) 

3.120 kgs 


4 High Impact Polystyrene 4.65 kgs 

5 Ethylene Propylene Rubber (EPR 0.215 kgs 



7 Thermofit Sleeve 0.780 Mtrs

C165 Cast Resin Straight joints 


sq.mm, XLPE 

/SWA/PVC, 600/1000 V 

cable 

C166 Cast Resin Straight 

through joints suitable 

for 4 x 70 sq.mm, XLPE 

/SWA/PVC, 600/1000 V 

cable 

C167 Ceiling Exhaust Fan or 

Ceiling Extraction Fan 

C168 Complete Ceiling fan 

with or without Metal 

Blades(36") 



8 Copper wire/rod 0.370 kg 



(Hardner) 

C19 

5.320 kgs 



Granules 

5 Ethylene Propylene Rubber (EPR 


5.600 kgs 

0.215 kg 



8 Copper wire/rod 0.370 kg 



(Hardner) 

1.22 kgs 

3 Catalyst 0.048 kgs 


Granules 

2.110 kgs 

5 Ethylene Propylene Rubber (EPR 0.215 kgs 


6 Mastic Sealing Tape 0.205 kgs 

7 Thermofit Sleeve 0.590 Mtrs. 


1 No. 1 Polypropylene 1.05 kg/kg content in 


2 High Impact Polystrene 1.05 kg/kg content in 


3 Lamination Steel (Electrical) 2 kg/kg content in 


4 Copper Wire/Bar/Rod 1.01 kg/kg content in 


5 Thermal Fuse Net to net. 

1 No. 1 Super Enamelled Copper 

Wire/Copper Wire Rod 

320 gm 

2 CRNGO Sheet/Coils 3100 gm 

3 Aluminium alloy 660 gm 

4 Kraft Paper 800 gm 

5 Polypropylene 130 gm 

6 M.S. Sheet 200 gm 

7 Ball bearing/ Bush 2 Nos 

8 Capacitor Net to net. 

9 Aluminium Sheet/CRCA Sheet 

(for Blades of Fan) (only the 

relevant item used in the export 

to be allowed) 


Wire/Copper Rod 

blades 48" 2 CRNGO Sheet/ Coils 

OR 

Electric Stamping made out of 

CRNGO Sheet. 



360 gm 

3400 gm 

OR 

1400gms.



Blades(42") 


(56") with or without 

Metal Blades and 

regulator 





7 Ball bearing/ Bush 2 Nos. 

8 Aluminium Sheet/CRCA 1.05Kg/Kg content in 

Sheet/Aluminium Alloy (for 

Blades of Fan) ( only the relevant 

item used in the export to be 

allowed). 



Wire/Copper Wire Rod 

320 gm 

2 CRNGO Sheet/ Coils 3100 gm 





7 Ball bearing/Bush 2 Nos. 


Wire/Copper Rod 

2 CRNGO Sheets/ Coils 

OR 

Electric Stamping made out of 

CRNGO Sheets 

C20 

380 gm 

3600 gm 

OR 

1500 gms. 

3 Aluminium Alloy 1200 gm 




7 Ball bearing/Bush 2 Nos. 


9 Aluminium Sheet/CRCA 

Sheet/Aluminium Alloy (for 

Blades and False Cover of Fan) 

(Only the relevant item used in 

the export to be allowed) [to be 

permitted only in such cases 

where Blades/False Cover are 

also required to be exported 

alongwith export product] 

10 Regulator [to be allowed only in 

such cases where the same is 

required to be exported 

alongwith the export product] 



11 MS/GI Pipe 1.02 Metre/Metre 


product. 

12 MS Bright Bar 1.05 kg/kg content in 


Note: 1. Norms covered by Sl.No. 168 to 171 above will also be applicable to shipment of products in SKD 

condition provided the exporter submit necessary proof of export of complete ceiling fans covered by 

various shipping bills at the time of closure of DEEC Book/Redemption of Bond / LUT. 

C172 Aluminium / Copper 

Conductor, XLPE 

1 km 1 Copper Wire Bar/ CC Rod (EC 

Grade) 

1 No. 

*

Insulated, GI/Single Wire 

Armoured, PVC 


600/1000 Vof various 

sizes as given in Engg. 

Table No. 10 

C21 

OR 

1 Aluminium Ingots * 

2 XLPE Compound * 


OR 

3 a) PVC Resin 60% of PVC 

Compound allowed 

in Engg. Table No. 

10 

b) Plastisizer 30% of PVC 



10 

c) Filler 10% of PVC 



10 

* Note: 1. The quantity of these items will be as per the Engineering Table No. 10 given at the end of this 

product group. 

C173 Deleted 

C174 Deleted 

C175 Deleted 

C176 CR/AL Thermo-couples 1 No. 1 Recrystalised Alumina Sheath Net to Net 

C177 Current Transformers 

above 245 KV (Outdoor 

Type)(Containing 275 kg 

of item 1, 280 kg of item 

2, 150 kg of item 3, 400 & 

150 kg of item 5 and 450 

or 540 Ltr. of item 6) 


above 0.66 KV upto & 

including 12.5 KV 

(Indoor 

Type)(Containing 6.50 kg 

of item 1, 7 kg of item 2, 

0.20 kg of item 3, 3 kg of 

item 4 and 5 kg of item 5) 

1 No. 1 CRGO Steel Laminations/ 

Sheets/ Coils with insulating 

coating of inorganic/ organic 

material 

OR 

316.25 kgs 

1 Nickel Iron Magnetic Strips/ 

Sheets/ Coils 

302.50 kgs 

2 Copper Winding Wires/ 

Strips/Wire Bars/ Wire Rods/ 

Cathodes 

282.80 kgs 

3 Electrical Grade Insulating Paper 165 kgs 

4 Porcelain Insulator 1 No. 

5 Mild Steel Sheets/ Coils 

OR 

440 kgs 

5 Aluminium Sheets/ Plates/ Ingots 157.50 kgs 


OR 

472.50 Litres 

6 Transformer Oil Base Stock 567 Litres 




material 

OR 

7.475 kgs 


Sheets/ Coils 

7.15 kgs 

2 Copper Winding Wires/ Strips/ 

Wire Bars/ Wire Rods/ Cathodes 

7.07 kgs 

3 Electrical Grade Insulating Paper 0.22 kg 

4 Mild Steel Steets/ Coils 3.30 kgs 

5 Epoxy Resin 5.25 kgs 

C179 Current Transformers 1 No. 1 CRGO Steel Laminations/ 10.35 kgs 

*


including 24 KV (Indoor 

Type)(Containing 9 kg of 

item 1, 9 kg of item 2, 


item 4 and 10 kg of item 

5) 


above 145 KV upto & 

including 245 KV 

(Outdoor 


of item 1, 145 kg of item 

2, 100 kg of item 3, 270 & 

100 kg of item 5 and 260 

or 312 Ltr. of item 6) 


above 24 KV (Indoor 





5) 


above 36 KV upto & 


(Outdoor 




item 5 and 60 or 72 Ltr. 

of item 6) 

1 



material 

OR 

Nickel Iron Magnetic Strips/ 

Sheets/ Coils 

9.90 kgs 

2 Copper winding Wires/ 

Strips/Wire Bars/Wire Rods/ 

Cathodes 

9.09 kgs 

3 Electrical Grade Insulating paper 0.33 kg 

4 Mild Steel Sheets/ Coils 3.30 kgs 





material 

OR 

195.50 kgs 

1 Nickel Iron Magnetic 

Strips/Sheets/ Coils 

187.0 kgs 



146.45 kgs 

3 Electrical Grade Insulating paper 110 kgs 



OR 

297 kgs 

5 Aluminium Sheets/ Plates/ Ingots 105 kgs 


OR 

273 Litres 

6 Transformer Oil Base Stock 327.60 Litres 




material 

OR 

13.80 kgs 


Sheets/ Coils 

13.20 kgs 



12.12 kgs 







material 

OR 

51.75 kgs 


Sheets/ Coils 

49.50 kgs 



32.32 kgs 

3 Electrical Grade Indulating paper 8.25 kgs 



6 Transformer Oil 63.0 Litres 

C22




(Outdoor 



50 kg of item 3, 90 kg & 

45 kg of item 5 and 185 or 

222 Ltr. of item 6) 


upto & including 0.66 KV 

(Indoor Tyre)(Containing 

1 kg of item 1, 1 kg of 

item 2, 0.05 kg of item 3 

and 1 kg of item 4) 


upto & including 36 KV 

(Outdoor 





of item 6) 

C186 Electric Door Bell 

C23 

OR 





material 

OR 

138 kgs 


Sheets/ Coils 

132 kgs 



45.45 kgs 

3 Electrical Grade Insulating paper 55.0 kgs 



OR 

99 kgs 

5 Aluminium Sheets/ Plates/ Ingots 47.25 kgs 


OR 

194.25 Litres 





material 

OR 

1.15 kg 


Sheets/Coils 

1.10 kg 



Cathodes 

1.01 kg 


4 Epoxy Resin 1.05 kg 




material 

OR 

26.45 kgs 


Sheets/ Coils 

25.30 kgs 



20.20 kgs 

3 Electrical Grade Insulating paper 3.85 kgs 




OR 

36.75 Litres 


1 No. 1 High Impact Polysterene 1.05 kg/kg content in 


2 Copper Wire Rod 

OR 

Ennameled Copper Wire 

3 CRGO Sheet (Gauge 35 to 45) 

OR 


C187 (A) Electric Lamp Caps 1000 Pcs. 1 FOR EXPORT ITEM (A) 




export product.

(Aluminium)/GLS Caps 

B22D & E 27/27 (B)FTL 

Caps (G-13/35mm) (C) 

FTL Caps (G-13/24mm 

or 24.5mm) 

C188 Electric Padestal Fan 

2 

Aluminium Strip 

OR 


OR 


2. Brass strip 

OR 

Brass Cathode/Rod 

FOR EXPORT ITEM (B) 

1. Aluminium Strip 

OR 

Aluminium Ingots 

2. Brass Pin 

3 FOR EXPORT ITEM ( C) 

1. Aluminium Strip 

OR 

Aluminium Ingots. 

OR 


OR 

2. Brass Pin 

1 No. 1 Motor Assembly alongwith Osc. 

Mech., Cable, Thermostate & 

Condensor 

OR 

The following raw materials for 

the above item:a) 

Super Enamelled Copper Wire/ 

Copper Wire Rod 

C24 

2.916Kgs 

OR 

2.974Kg 

OR 

3.047Kgs. 

0.224 kgs 

OR 

0.233 kgs 

2.55 Kgs 

OR 

2.601 Kgs 

2020 Nos 

1.65 Kgs 

OR 

1.683 Kgs. 

OR 

1.724 Kgs 

OR 

2020 Nos 

1 No. 



b) Electrical Steel Sheet 1.10 kg/kg content in 


c) Bright Carbon Steel Rod 1.10 kg/kg content in 


d) Pig Iron 1.10 kg/kg content in 


e) Cold Rolled Sheet 1.10 kg/kg content in 


f) Aluminium Alloy 1.05 kg/kg content in 


g) Bush/Ball Bearing 1 No. 

h) Thermostate 1 No. 

2 A.B.S. Granules 1.05 kg/kg content in 


3 Switch 

OR 

1 No. 

3 a) Phenol Formaldehyde Resin 1.05 kg/kg content in 


b) Brass Sheet 1.05 kg/kg content in 


c) Polystyrene 1.05 kg/kg content in 


4 Thermonal Block 1 No. 

5 Polypropylene 1.05 kg/kg content in 


6 Cable/Cord with Plug 

OR 

1 No. 

a) Plug 1 No. 

b) Cord/Cable 1.02 Mtr/Mtr content 

in export product

C189 Electric Fan with Table 

Stand/ Wall Bracket 


8 Steel Tubes 1.05 Mtr/Mtr content 


9 Castor Wheel 3 Nos. 

10 Mesh Guard 

OR 

C25 

1 No. 

10 a) Spring Steel Wire 1.05 kg/kg content in 


b) Black Annealed Wire 1.05 kg/kg content in 


11 Nickel/Chromium Plate 0.97% of net weight 

of steel to be plated. 

1 No 1 Motor Assembly along with 

oscillation mechanism cables 

thermostat and condensor 

OR 

1 a) Super Enamelled Copper Wire/ 

Copper Wire Rod 

1 No 

1.01 Kg/Kg content 


b) Electric Steel Sheet 1.10 Kg/Kg content 


c) Bright Carbon Steel Rod 1.10 Kg/Kg content 


d) Pig Iron 1.10 Kg/Kg content 


e) Cold Rolled Sheet 1.10 Kg/Kg content 


f) Aluminium Alloy 1.05 Kg/Kg content 


g) Bush/Ball Bearing 2 Nos 

h) Thermostat 1 No 

I) Capacitor (Condenser) Net to Net 

2 A.B.S. Granules 

OR 

2 a) Plug 1 No 


in export product. 

b) Cable/Cord 1.02 Mtr./Mtr content 


3 Switch 

OR 

1 No 

3 a) Phenol Formaldehyde Resin 1.05 kg/kg content in 


b) Brass Sheet 1.05 kg/kg content in 


c) Polystyrene 1.05 kg/kg content in 


4 Terminal Block Net to net 

5 Polypropylene 1.05 kg/ kg wt of P.P 

item 

6 Silicon Tubes Net + 2% Wastage 

7 Cord Grip Net to Net 

8 Mesh Guard 

OR 

1 No. 

8 a) Spring Steel Wire 1.05 kg/kg content in 


b) Black Annealed Wire 1.05 kg/kg content in

C190 Electrical Control Panels 

made of CRCA Sheets 

C191 Electrical Copper 

Earthing Rods 

C192 Electrical light Fittings 

with Glass, Switches and 

Holders 

C193 Electrical Measuring 

instruments Type 

:Moving Iron Moving 

Coil Dynamo Meter 

Bimetallic Reed type, 

Namely Volt meter, 

Ammeter, frequency 

Meter, WATT meter, 

Multimeters, Insulation 

testers, Maximum 

Demand Indicator power, 

Factor meter 

1 kg content 

of import 

item 

C26 


9 Nickel/Chromium Plate 0.97% of net weight 

of steel to be plated. 

1 Mild steel CRCA Sheets/ 

cuttings/ coils/ defective/ 

secondary 

1.05 kg 

1 kg 1 Electrolytic Copper Wire Bars / 

Wire Rods 

OR 

Copper Scrap 

1 Electrical Light Fittings 

components made of Brass/ 

Aluminium/SS in the form of 

castings, pipes, sheets etc. 

2 Holders net to net 

3 Switches net to net 



OR 



net to net 

4 Glass Shades Net + 2% wastage 

1 No. 1 Plastic Moulding Powder 170 gms. 

a) ABS 

b) Polycarbonate 

c) Polyphenylene Oxide 

d)Polyacetal 

e) Polycarbonate 

f) Polyamide 

g) Phenol 

Formaldehyde(Bakelite)Powder 

and moulded components thereof 

2 Printed circuit Boards Net to Net 

3 Pre-painted Aluminium Sheets 20 gms 

4 Silicon Oils 1 gm 

5 Glass Sheets Net to Net 

6 Industrial Jewels with Screws 2 Nos 

7 Pivot 2 Nos 

8 Hair Springs Net to Net 

9 Resistance Wire Net to Net 

10 Super Enamelled Copper Wire Net to Net 

11 Duralumin Rods, Free Cutting 

Aluminium Rods, Capillary 

Tubes 

a) Copper Bars/ Strips 

b) Managanin Wire/ Rods 

c) Eureka Wire/ Rods 


12 Magnet Centre Core Net to Net 

13 Coil Former 1 No 

14 Resistors, MFR, Wire wound & 

Other 

Net to Net 

15 Mumetals Permalloy Strips & 

Components thereof 

Net to Net 

16 Pointers/ Pointers Arms Net to Net 

17 Taut Bands/Ligaments Net to Net

C194 Electrical Ovens made of 

CRCA Sheets 

C195 Electrical Power HT 

Capacitors (All film 

design above 660 Volts up 

to 132 KV) 

C196 Electrical Power HT 

Capacitors (mixed dielectric 

design) above 660 

volts upto 132 KV 

C197 Electrical Power LT 

Capacitor (Metalised 

Polypropylene di-electric 

design) up to 600 Volts. 


Capacitors (All 

Polypropylene Film 

Design) upto 660 Volts 


Capacitors (Mixed 

dielectric design) up to 

600 Volts. 

C200 Electrical Switch Boxes 

made of CRCA Sheet 


Accessories made of 

Aluminium 

1 kg content 

of import 

item 

18 Barllium Copper/ 

Phospher/Bronze Strips and 

components thereof 

20 gms 

19 Aluminium Die Castings 100 gms 

20 Bimetallic Springs 2 Nos 

21 Springs Steel strips Net to Net 

22 Transistors, Capacitors, IC's & 

other electronic components not 

covered by other input entries 

Net to Net 

23 Copper Braids Net + 2% wastage 

24 Yoke 1 No 

25 Hybride Circuits 1 No 

26 Zener Diodes 2 Nos 

27 Yoke Holder 1 No 

28 Lower Boss/Under Boss 1 No 



secondary 

C27 

1.05 kg 

1 KVAR 1 P.P film 0.0997 kg 

2 Aluminium Foil 0.0472 kg 

3 Non PCB Capacitor Oil 0.0892 kg 

1 KVAR 1 P.P. film 0.1008 kg 


3 Condensor tissue paper 

(Electrical Grade) 

0.063 kgs 


1 KVAR 1 Metalised Polypropylene (MPP 

Film) 

0.105 kg 


1 KVAR 1 P.P. Film 0.168 kg 



1 KVAR 1 PP film 0.300 kgs 


1 kg content 

of import 

item 

3 Condensor tissue paper 

(Electrical Grade) 

0.157 kg 




secondary 

1 kg 1 Aluminium/ Aluminium Alloy 

Ingots 

1.05 kg 



2 Aluminium Sheet 1.05 kg/kg content in 


3 PFM Powder (Bakelite Powder) 1.05 kg/kg content in 


4 Taleflex/Neoprene Sheet 1.05 kg/kg content in


Accessories made of Zinc 


Accessories made of 

copper/Copper Alloy & 

relevant finished parts 

made of plastic/steel 

5 M.S. Wire Rod for making 

Screw 

6 Misc. Items: Die Steel, Emery 

Belt/Grinding Wheel/Monting 

Points, HSS/ Carbide Drills & 

Taps, Reamers, Cutters, Bits, 

Thread Rolling Dies, Chasers, 

Aluminium Shot/ Stainless Steel 

Shots, Cutting Oil, 

Foundryluxes/Chemicals, Die 

Release, Paints, Stoving Thinner 

C28 




Upto 2% of FOB 

value of exports. 

1 kg 1 Zinc Ingot 1.10 kg/kg content in 

export. 

2 M.S. Screws Net to net. 

3 Nylon-6/LDPE/PP/LDPE 1.05 kg/kg content in 


4 Neoprene/Rubber/Hitite Gasket 

material 



5 Aluminium Section/Sheet 1.05 kg/kg content in 


6 Misc. Items: Diesteel, Emery 

Belt Drills,Reamers, Cutting Oil. 

1 kg 1 Copper Alloy, Ingot/Scrap(Gun 

Metal, Aluminium- Bronze) 

OR 


value of export. 


export product of the 

appropriate alloy 

1 a) Copper Wire Bar/Scrap 1.10 kg/kg content in 


b) Zinc Ingots 

OR 



1 Brass Scrap 1.10 kg/kg content in 


2 Steel Components viz. SS/MSG 

Screws, Nuts, bolts, Revets, 

Strips, Washers 

OR 

Net to Net 

2 a) SS/MS Wire rods/Bars 1.15 kg/kg content in 


b) SS/MS Sheets/Plates/Coils 1.15 kg/kg content in 


3 Copper/Copper Alloy 

Components, viz. Screws, Nuts, 

Bolts, Revets, Strips, Washers 

OR 

Net to Net 

3 a) Copper/Copper Alloy wire Rod 1.10 kg/kg content in 


b) Copper/Copper Alloy Sheet 1.10 kg/kg content in 


4 Paper Tube 

OR 

Kraft Paper Electrical Grade 

Plastic Components 

OR 

Relevant Plastic Material 

5 Misc. items: Diesteel, Emery 

Belt Drills, Reamers, Cutting Oil 

Net to net. 



Net to net 




value of exports

C204 Electromechanical 

Domestic appliances with 

self contained motor: 

Vacummizer set - One set 

consisting of Vacummizer 

Pump or vacumizer 

pump(UL approved) 

or/and Vacuseal 

container of relevant 

sizes. 

C205 Emergency Lamp 

C206 Enamelled Copper Wire 

1 No. 1 Switches Net to net. 

2 Thermal Protector Net to net. 

3 Filters Net to net. 

4 Polyslider Tape Net+5% wastage 

5 ABS Granules Net + 5% wastage. 

6 Polycarbonate Net + 5% wastage 

7 Styrene Acrylonitrile for 

Vacuseal containers of relevant 

sizes 

8 Polypropylene for Vacuseal 

containers of relevant sizes 

9 Thermoplastics(Evoprene) for 

Vacuseal containers of relevant 

sizes 

10 Polypropylene for Vacumizer 

Pump 

11 Thermoplastic (Evoprene) for 

Vacumizer Pump. 

C29 











12 Core for Silencer (Filters) Net to net. 

13 Motor Net to net 

14 TOD Switches Net to net 

15 Power Cord with Plug Net to net. 

16 Cable (Single/Multi Core Copper Net to net 

Wire) 

17 KSS Wire Connector Net to net. 

18 Flame Retardant ABS for 

Vacumizer Pump 

19 Nylon Polymers for Vacumizer 

Pump 





20 Drop-in-insert (Paper Brochures) Net to net. 

21 Labels (Mylar Stickers) Net to net. 

22 Colour Cartons Net to net. 

1 No. 1 ABS Plastic Granules 0.5 Kg 

2 PP Plastic Granules 0.25Kg 

3 Fluorescent Tubes 2 Nos 

4 Re chargeable Battery 1 No 

5 ICLM 317 1 No 

6 2CS 1384 3 Nos 

7 2CS 8050 3 Nos 

1 kg 1 Copper Rods/Copper Wire Rods 

(EC grade)/Continuous Cast 

Copper Rods/Copper Cathodes 


respect of the product 

having diameter upto 

0.2mm or 1.02 kg/kg 

content in respect of 

the product having 

diameter above 0.2 

mm 

2 Insulating Enamel/Varnishes Upto 5% of FOB 


C207 1 No. 1 CRGO Steel Sheets 1.26 kg.

Exhaust Fan 12"/300MM 

Sweep Domestic 

C208 Exhaust Fan 12"/300MM 

Sweep Industrial type 


Sweep Industrial type 


Sweep Industrial Type 


Sweep Industrial Type 


Sweep Domestic 

2 Copper Wire(SE)/Wire Rod 0.29 kg. 

3 Aluminium Ingots/Alloy/Scrap 0.81 kg. 

4 Steel Sheet 2.92kgs. 

5 Bearing Plain/Sealed 2.00 Nos. 

6 Capacitor 1.00 No. 

7 Steel Bar 0.14 kg. 

1 No. 1 CRGO Steel Sheets/ CRNGO 

Steel Sheet 

C30 

1.68 kg. 



4 Steel Sheet 4.80 kgs. 





Steel Sheet 

2.1 kg. 








Steel Sheet 

4.20 kg. 








Steel Sheet 

7.00 kg. 








Steel Sheet 

0.98 kg. 





6 Capacitor 1.00 No.

C213 Fluorescent Circular 

Lamp (23W/32W) 

C214 Fluorescent Tube (36 

Watts and 40 Watts) 

C215 Fluorescent Tubes (18 

Watts and 20 Watts) 


100 Nos 1 Glass Shell 

2 Fluorescent Powder 0.4676 kg 

3 NA Powder CMZ 0.014 kg 

4 Tungsten Wire 0.008 kg 

5 Lead Glass Flare 0.95 kg 

6 Lead Glass Exhaust 1.31 kg 

7 Lead in Wire 440 Nos. 

8 Cap 101 Nos. 

9 Emitter Suspension 0.0018 kg 

10 Stamping Ink 0.002 kg 

1000 Nos 1 Glass Tube Shells 1150 Nos. 

2 Tungsten Filament 

OR 

2 a) Tungsten Wire 

AND 

C31 

2020 Nos 

100 gms 

b) Molybdenum Wire 176 gms 

3 Fluorescent Powder 

OR 

3 a) Di-Calcium Phosphate 

AND 

6.63 Kg 

6.00 kgs 

b) Calcium Carbonate 2.00kgs 

4 Lead Glass Flare 10.00 Kgs 

5 Lead Glass Exhaust 5.00 Kg 

6 Aluminium Caps 

OR 

2020 Nos 

6 Aluminium Strips 6.67 kgs 

7 Lead-in-wire 4040 Nos 

8 Emitter-Suspension 0.06 Litre 

9 Anode Strips 0.90 Kg 

10 Silicon Resin 0.087 Kg 

11 Mercury 0.18 Kg 

12 Nickel Iron Support 0.10 Kg 

1000 Nos. 1 Tungsten wire 940 Microns for 

Filament 

2 Moly Wire 820 Microns for 

Filaments 

86 gms 

147 gms. 

3 Fluorescent Powder 3500 K or 

6500 K 

OR 

5.00 Kgs. 

3 a) Di-Calcium Phosphate 

AND 

4.50 kgs 

b) Calcium Carbonate 1.50 kgs 

4 Lead Glass Tubing for Flare 10.00 Kgs. 

5 Lead Glass Tubing for exhaust 5 Kgs 

6 Glass Tube Shells 1150 Nos 

7 Silicon Resins Grade H-44 20 gms

C216 Fractional horse power 

single phase case type 

construsction motor with 

cast iron or aluminium or 

sheet metal end cover - 0 

Watts to 25 Watts 







8 Silver Nitrite 11 gms. 

9 Triple Carbonate 47 gms. 

10 Mercury Double Distilled 

99.99% minimum Purity 


OR 

C32 

140 gms. 

2020 Nos. 

11 Aluminium Strips 3.78 Kgs 

12 Lead-in-wire 4040 Nos. 

1 No. 1 Cold Rolled Non-oriented 

(CRNO) electrical steel 

sheets/sheets in coil form 

183.58 gms/KW 

2 Copper wire 

bars/cathodes/rods/winding 

wires/strips 

21.63 gm/KW 

3 Pig iron for housing (end shield) 

OR 

49.32 gms/KW 

3 Commercial grade aluminium in 

ingot form (upto 99.5% purity) 

for housing (end shield) 

OR 

12.00 gms/KW 

3 CRCA Sheets for housing (end 

shield) 

25.00 gms/KW 

4 Mild Steel sheets for mounting 37.36 gms/KW 

5 Electrolytic grade aluminium for 

rotor 

6.55 gms/KW 

6 EN-8 Alloy Steel for shaft 7.20 gms/KW 

7 Ball/Sleeve/Roller Bearings 2 Nos.(Net to net) 

8 Composite insulation material 

consisting of paper, nylon, 

polyester, amide, nomex films 

1.5% of FOB price 

9 Thermal protectors/thermo strips Net to net. 

10 Power Capacitor 1 No. (Net to net) 




107.35 gms/KW 

2 Copper wire 


wires/strips 

12.26 gm/KW 



for housing(end shield) 

OR 

24.42 gms/KW 

3 CRCA Sheets for housing(end 

shield) 

50.00 gms/KW 



rotor 

3.30 gms/KW 








10 Power Capacitor 1 No. (Net to net)











sheet metal end cover - 

121 Watts & above 

C220 Galvanised Transmission 

Line/Telecom Towers & 

Parts thereof 




74.40 gms/KW 

2 Copper wire 


wires/strips 

7.35 gm/KW 




OR 

12.97 gms/KW 


shield) 

26.00 gms/KW 



rotor 

2.08 gms/KW 












62.59 gms/Watt 

2 Copper wire 


wires/strips 

5.25 gm/Watt 




OR 

7.80 gms/Watt 


shield) 


4 Mild Steel sheets for mounting 6.38 gms/Watt 


rotor 

1.55 gms/Watt 

6 EN-8 Alloy Steel for shaft 2.78 gms/Watt 








1 kg 1 a) Angles of relevant grade of Steel 

OR 

Billets / Blooms of relevant 

grade of Steel 

b) Plates of relevant grade of Steel 

OR 

C33 



1.045 kg/kg content 




Slabs of relevant grade of Steel 1.075 kg/kg content 


2 Unwrought Zinc 0.065 kg

C221 GLS Lamps (upto 100 

Watts and below) 

C222 H-3 Halogen Lamps 

20W-130W/12V-24V 

C223 H.P.M.V. Lamps (250 W) 

C224 H.P.S.V Lamps (250 W) 

1000 Nos 1 Glass Shells 1100 No. 

2 Relevant Filament 

OR 

2 a) Tungsten Wire 

AND 

C34 

1010 Nos 

48 gms 

b) Molybdenum Wire 81 gms 

3 Lead Glass Flare 4.2 kgs 

4 Lead Glass Exhaust 2.7 kgs 


OR 

1010 Nos 

5 Aluminium Strips 3.1 Kgs 

6 Lead in-wire 2020 Nos 

7 Moly Support Wire 0.22 K.M. 

1000 Nos. 1 Fused Quartz Main Tube 2.45 kgs. 

2 Fused Quartz Exh. Tube 1.02 kgs. 

3 Moly Ribbon 0.028x2mm 16.8 Mtr. 

4 Moly Wire 0.6 mm 37.18 Mtrs. 

5 Pt. Clad Moly Ribbon 2.20 Mtrs. 

6 Tungsten Filament 1010 Nos. 

7 Insulated Wire 107.1 Mtrs. 

8 Shrink Tube 16.663 Mtrs. 

9 Metal Cap 1010 Nos. 

10 Metal Collar 1010 Nos. 

11 Krypton Gas 0.052 M 3 


2 Matrix Resistor 1010 Nos 

3 Yitrium Vanadate 0.44 kg 

4 Flush Gas 5.00 Ltrs 

5 Exhaust 2.70 Kgs 

6 Caps 1010 Nos 

7 Lead-in-wire 2020 Nos 

8 Aerosil 0.15 Kg 

9 Solder Wire 1.80 Kg 

10 Flang 7.20 Kg 


2 Arc Tube 1100 No. 

3 Getter Rings 2200 Nos. 

4 Flare Tube 14.00 Kgs. 

5 Exhaust Tube 5.00 Kg 

6 Caps 1010 Nos 

7 Lead-in-wire 2200 No. 

8 Nickel Manganese Strip 2100 No. 

9 Ferro Nickel (Strip/Bracket) 1100.00 Nos 

10 Calcium Di-phosphate 0.05 Kg

C225 H.P.S.V Lamps Arc Tube 

(Burners) (150/250/400 

W) 

C226 H4 Halogen Lamps 

45/40W to 130/90W (12 V 

to 24 V) 

C227 Heater Coil/ tungsten 

Vaccum Metallizing Coils 

1000 Nos 1 Electrodes 2320.00 Nos 

2 Frit Ring 2240.00 Nos 

3 Amalgam 40.00 Gms 

4 Xenon Gas 8.00 Ltrs 

5 PCA Tube 1060.00 Nos 

6 Niomium Supports 2320.00 Nos 

1000 Nos 1 Hard Glass Main Tube( 

16x1.13x1435 mm) 

2 Hard Glass Exh. 

Tube(3.50x0.72x1219 mm) 

3 Fused Quartz Glass Rod 

(2.5mmx1000) 

4 Moly Wire 0.6 mm 

(45.5mm/51.7mm/56.7mm) 

C35 

7.6 kg 

0.90 kg 

0.298 kg 

175 Mtrs 

or 

1120 Sets 

5 Moly Mirror/Shield 1100 No 

6 Moly Sleeves (4 pc. 

set)(2mm/3mm/4mm) 

1160 set 

7 Tungsten Filament(Main) 1010 No. 

8 Tungsten Filament (Sub) 1010 No. 

9 Krypton Gas (99.99%) 0.0258 M 3 

10 Black Top Paint (anti glare paint) 0.313 kg 

11 Metal Adopter 1010 No 

12 Metal Cap 1010 No 

13 Metal Coller 1010 No 

1 Kg 1 Tungsten Filament Wire 0.8 mm 

and above dia. 

2 Colloidal Graphite with Solid 

content of 20% 

1.10 Kg 

0.10 Kgs 

C228 Heating Elements 1 No. 1 Resistance Wire 9 SWG Net to Net 

C229 High Pressure Mercury 1000 Nos. 1 Quartz Rod Body 1010 Nos. 

Vapour Lamps (125 W) 

2 Quartz Exhaust Tube 1010 Nos. 

3 T.T. Cathodes 1050 Nos. 

4 Moly Ribbon 1010 Nos. 

5 Matrix Resistors 1050 Nos. 

6 Nickel Strips 0.905 kg 

7 Capping Cement 2.2 kgs 

C230 Inductors with Torroidal 1 kg 1 Ferrites Net to net. 

Windings 2 Self Soldering Copper Wire 1.02 kg/kg content in 


C231 Industrial Heater and 

Thermocouple 

1 MT 1 Nickel Chrome Wire & Tape 1.05 MT/MT content 

in export. 

C232 Inline Copper 

Connectors 

1 MT 1 Electrolytic Copper Wire Bars 1.05 MT 

C233 Instant Water Heater 1 No. 1 ABS Plastic Granules 0.6 Kg 

2 PP Plastic Granules 0.3 Kg 

3 Heating Element 1 No

C234 Insulation Tube Heat 

Shrinkable (For sleeve 

conductor) 16 to 25 mm 

sq. Copper Conductor. 



conductor) 70 to 120 mm 

sq. Copper Conductor 



conductor) 185 to 240 

mm. sq. Copper 

conductor 

C237 Intensifying Screens 

C238 J Halogen Lamps 

1000W/110V 260V 


1500W/2000W 

4 Thermostat 1 No 

5 Stainless Steel Sheet 0.95 Kg 

1 No 1 Heat shrinkable Strees control 


1 No 1 Heat shrinkable Strees control 


1 No 1 Heat shrinkable anti-tracking 

whethering insulating tubing 

(Red colour size) 

C36 

1 Mtr 

1 Mtr 

1 Mtr 

1 kg 1 X- Ray Phosphor 0.6615 kg 

2 Polyester Film 0.34125 kg 






6 Tungsten Filament with end 

plugs (240V - 300W) 

1010 Nos. 

7 Tungsten Support Coil 2240 Nos. 

8 Tungsten Support Wire 648 Mtrs. 

9 Tungsten Flashing Wire 3.5 Nos. 

10 Metal Contact K-6 2040 Nos. 

11 Ceramic Base R-75 2040 Nos. 

12 Betac Cement 830HB 1.1 kg. 

13 Marking Ink 0.055 Ltr. 

14 Krypton Gas 0.052 M 3. 


2 Fused Quartz Exh. Tube 1.47 kg. 





plugs (240V - 300W) 

1010 Nos. 







13 Marking Ink 0.055 Ltr.


300W,500W,110V-260V 

C241 Juicer Mixer Grinder 

with Stainless Steel Jar 

C242 Deleted 

C243 Deleted 








plugs (240V - 300W) 

C37 

1010 Nos. 







13 Marking Ink 0.055 Ltr. 


1 No. 1 ABS MouldingPowder 1.05 kg/kg content in 


2 Stainless Steel Sheets/Coils 1.15 kg/kg content in 


3 Poly Acetal Moulding Powder 1.05 kg/kg content in 


4 Motor of Relevant Rating Net to net. 

5 PVC Compound 1.05 kg/kg content in 




7 Polypropylene Moulding Powder 1.05 kg/kg content in 


8 SAN MouldingPowder 1.05 kg/kg content in 


9 Aluminium Ingots 1.05 kg/kg content in 


10 Bronze 1.05 kg/kg content in 


11 Polycarbonate Moulding Powder 1.05 kg/kg content in 


12 Phenol Formaldehyde 1.05 kg/kg content in 


C244 Marine Cable of different 1 KM 1 Copper Wire Bar * 

types and specifications 

as given in Engineering - 

Table 4. 

2 PVC Compound * 

* Note : The quantity of these will be as per the Engineering Table 4 given at the end of this product 

group. 

C245 Miniature Circuit 

Breakers & Isolators 

1000 Nos. of 

poles 

1 PETP,PBTP Glass Filled, Nylon 

6,Nylon 66, Plain or Glass Filled 

Polycarbonate, 

Deldon,Stanyle,Polyamide 46 

75 Kgs

2 

Glass Filled Melamine,Urea 

Formaldehyde Unsaturated 

Polyester Glass Filed compound 

(Above materials may/may not 

be fire retardant) 

Copper Strips, Copper Silver 

Inlay Strips, Brass Strips, Brass 

Extruded Sections, Phosphor 

Bronze, Copper Wire Bar, Rods 

27 Kgs 

3 Enamelled Copper Wire, Copper 

Wire Bar/Rod 

12 Kgs 

4 Thermo Bimetal, Trimetal Strips 2 Kgs 

5 Silver Graphite, Silver Tungsten, 

Silver Cadmium Oxide contact 

Tips 

6 Copper Silver Coated Copper 

Braid 

7 CRCA Sheets, Strips, Coils, 

including Copper Clad 

8 Miscellaneous Items viz. Mazak, 

Spring Steel Wire, Strips, 

Springs, Fire Retardant 

Chemicals, Insulating Sheet, 

Board, Fine Blank Parts,Plastic 

Latches, Toggle Link, Wire 

Forms, Screws, Stainless Steel 

Wire,Strips 

C38 

1020 Nos. 

1.8 Kgs 

75 Kgs 


Value 

Note: 1. The above norms are for 1000 Single Pole MCBs. For Multiple MCBs, the entitlement will be 

multiple of above norms depending upon the number of poles. 

C246 Molybdenum support 

wire 

C247 MR-16 Halogen Lamps 

20W-100W/6V-12V 

C248 Multicore PVC insulated 

unarmoured/ armoured 

control purpose Copper 

Cable for Voltage up to 

1000 V of different sizes 

as given in Engineering - 

Table 5. 

1 Kg 1 Molybdenum wire 1.02 kg/kg content in 

export 




4 Moly/Nickel Lead in Wire 2240 Nos. 


6 Tungsten Filament 1160 Nos. 

7 Coated Reflactor 1030 Nos. 

8 Krypton Gas 0.052 M 3 

9 Betac Cement 830 HB 1.10 kg/kg content in 

export 

1 KM 1 Copper in the form of Copper 

Cathode/Wire Bars/ CC Rods 

(EC Grade)/Copper Wire Rod 

* 

2 (a) PVC Compound for 

Unarmoured OR (b) PVC 

Compound for armoured OR (c) 

PVC Resin 

60% of weight of 

PVC compound 

allowed in Engg. 

Table 5. 

Plasticizer 30% of weight of 

PVC compound 


Table 5 

3 Filler (Calcium 

Carbonate/Allumina/Talc/Kaolin 

e) 


PVC compound 


Table 5.

* Note : The quantity of item nos 1 and 2 will be as per the Engineering Table 5 given at the end of this 

product group.If the alternative item I.e. PVC Resin, DOP & Filler is sought in lieu of import item No. 2 

PVC compound, their import shall be permitted to the extent stated below:1. PVC Resin-60% of the 

permissble quantity of PVC compound as per Engg. Table -5.2. DOP-30% of the permissble quantity of 

PVC compound as per Engg. Table -5.3.Filler-10% of the permissble quantity of PVC compound as per 

Engg. Table -5. (The quantity of item Nos. 1 & 2 (a) or 2(b) will be as per the engg. Table 5 given at the 

end of this product group.4. Wherever PVC stabilizer is asked for it may be allowed up to 3% of the 

quantity of PVC compound, subject to reduction of the same % age in the quantity of PVC resin. 

C249 Non Alloy 

Ground/Earthing Rods 

(Galvanised) 

C250 Out door Weather Proof 

Light Fitting with Glass 

Shell/ Acrylic Cover 

C251 Outdoor Over Head 

Termination Kits 

complete with Cable 

Gland and/or Bush, PVC 

Shroud And (with or 

without) Ring Lock Nuts 

C252 Paper Covered Copper 

conductors 

(Strips/Wires). 

C253 Plated Wires 

(Single/Stranded) 

(A) of Copper 

OR 

(B) of Copper 

Clad/Coated Steel 

OR 

(C) of Copper Alloy. 

1000 kgs 1 Non Alloy Steel Ingot 

OR 

1080 kgs. 

Non Alloy Steel Billets/Bars 1060 kgs. 

2 Rolls for Rolling Mills 1.77 kgs. 

3 Zinc @@2% of the 

finished weight of the 

ground rod 

1 No 1 Relevant Glass Shell/ Acrylic 

Cover 

OR 

Acrylic sheet (in place of Acrylic 

Cover) 

2 Relevant Moulding 

Powder/Granules (For Body) 

C39 

1 No. 


Acrylic Cover 



3 M.S Wire Rod 3.4 mm 1.05 Kg/Kg content 


4 Aluminium Sheet 1.05 Kg/Kg content 


5 Relevant Synthetic Rubber 1.05 Kg/Kg content 


1 kg 1 Brass Scrap 1.075 kg/kg content 


2 PVC Compund 

OR 

1.05 Kg./kg content 


2 PVC Shrouds 1.05 kg/kg content in 


3 Non Alloy 

Steel/Coil/Strip/Plate/Bar 

1 kg 1 Continuous Cast Copper 

Rods/Copper Wire Rods 

/Bars/Cathodes (EC Grade) 





2 Relevant Insulating Paper 1.02Kg/Kg content in 


1 kg 1 1(a) Copper Cathode/Wire 

Bar/CC Rod/Wire/Copper Wire 

Rod 

OR 

1 Kg 

1(b) Copper Clad/coated Steel 

Wire 

OR 

1 Kg 

1(c) Copper Alloy 

Wire/Cathode/Wire Bar/C C 

Rod/Wire/Copper Wire Rod 

1 Kg. 

2 Silver 99.9% purity (Ingot, 

Granules, Plates or 

Powder)/Copper wire Rod 

0.025Kg. 

3 Wire Drawings Dies, Drawing 

Lubricants Welding Dies, Tin, 

Nickel, S-Nickel, Electroplating 

Salts, Plating Additives. 

2% of the FOB value 

of exports

4 Plastic Bobbins, Plastic Spools, 

Protective paper/film. 

C40 

As per packing 

policy. 

Export product may have Silver, Nickel or Tin plating on it, but Silver will be allowed only if the export 

product has Silver plating on it.Import of base metal in 1 a), b) or c) will be allowed depending on the base 

metal used in export product (a) or (b) or (c) 

C254 PTFE Insulated Wires 

and Cables with Copper 

Conductor 

1 kg 1 Copper (Cathode/Wire 

Bar/Continuous Cast 

Rod/Wire/Alloy Wire)/Copper 

Wire Rod 

1.02 kg/kg of net 


product. 

2 PTFE Resin Fine Powder 1.13 kg/kg of net 


product 

3 Silver 99.9% Purity 

(Ingots/Shots/Powder) 

4 Pigments,Ink,Silicone Fluid, 

Polyimide Film(Kapton), Lownoise 

Dispersion, Tween-85, 

Synthetic Resin, Yarn Plain & 

Finished Sized including Glass 

Fibre Yarn, Finished forms, 

Dispersions of Polymeric Resins 

5 S.Nickel, Unplated or Plated 

Single or Multistrand Wire of 

Copper/Copper Alloy/Copper 

covered Steel/Nickel/Resistance 

Alloys/Stainless Steel, 

Connectors Flat/Round/Coaxial, 

Terminations. 



product 

Upto 2% of the FOB 

value of Export. 


Value of exports 

Note:1. Silver or Nickel will be allowed on relevance basis, i.e. for silver coated wires, silver will be allowed 

and for nickel coated wires, nickel will be allowed. 

C255 Deleted 

C256 PVC 3 Core Flat Cable 

Suitable upto 1100 V of 

size - 3x1.5 sq.mm(22/.3) 

Overall Dimension = 

Width(mm)xThickness(m 

m) i.e. 12.8x6.0 


suitable upto 1100 V of 

size - 3x2.5 

sq.mm(36/.3)Overall 

Dimension = 


m) i.e. 14.6x6.4 

1000 Meters 1 Copper Wire Rods (EC Grade) 41.89 kgs. 


OR 

91.72 kgs. 

2 i) PVC Resin 58.70 kgs. 

ii) Plasticizer 24.77 kgs. 

iii) Filler(Calcium 

4.38 kgs. 

Carbonate/Alumina/Talc/Kaoline 

) 

iv) Lubricants 0.88 kg. 



OR 

116.41 kgs. 




5.81 kgs. 


) 


C258 PVC 3 Core Flat Cable 1000 Meters 1 Copper Wire Rods (EC Grade) 108.54 kgs. 


size - 3x4.0 sq.mm(57/.3) 


OR 

141.38 kgs. 

Overall Dimension = 



ii) Plasticizer 38.18 kgs.

m) i.e. 17.2x7.4 



size - 

3x6.0sq.mm(85/.3)overall 

Dimension = 


m) i.e. 18.7x7.9 



size - 3x10.0 

sq.mm(140/.3) overall 

dimension 

=width(mm)xThickness( 

mm) i.e. 23.7x9.9 



size - 3x16.0 


Dimension 

=width(mm)xThickness( 

mm) i.e. 28.0x11.4 



size - 3x25.0 

sq.mm(334/.3) Overall 

Dimension = 

Width(mm)x 

Thickness(mm) i.e. 

35.5x14.7 

C263 PVC 3 Core Flat cable 


size - 3x35.0 


Dimension = 


m) i.e. 39.5x16.2 

C41 


7.06 kgs. 


) 




OR 

164.12 kgs. 




8.19 kgs. 


) 




OR 

246.77 kgs. 




12.32 kgs. 


) 




OR 

306.05 kgs. 




15.23 kgs. 


) 




OR 

487.98 kgs. 




24.36 kgs. 


) 




OR 

570.00 kgs. 




28.45 kgs. 


) 


C264 1000 Meters 1 Copper Wire Rods (EC Grade) 1338.72 kgs.

PVC 3 Core Flat Cable 


size - 3x50.0 


Dimension = 


m) i.e. 45.5x18.3 



size - 3x70.0 


Dimension = 


m) i.e. 51.0x20.0 



size- 3x95.0 


Dimension = 


m) i.e. 60.0x23.5 

C267 PVC Insulated Power 

Cable with Copper 

Conductor Unarmoured 

for Voltage upto 1000 V - 

Size: 3 Core x 1 Sq.mm 





Size: 3 Core x 0.75 

Sq.mm 





Size: 3 Core x 0.50 

Sq.mm 


Cable/ L.T PVC Cables 

of various sizes with 

Copper/ Aluminium 


OR 

C42 

759.35 kgs. 




37.91 kgs. 


) 




OR 

921.02 kgs. 




45.98 kgs. 


) 




OR 

1206.57 kgs. 




60.23 kgs. 


) 



Cathode/Wire Bars/CC Rods (EC 

Grade)/Copper Wire Rod 

26.936 kgs 


OR 

74.80 kgs 

a) PVC Resin 44.880 kgs 

b) DOP 22.440 kgs 

c) Fillers 7.480 kgs 




20.20 kgs 

2 PVC Compound 71.38 kgs 




13.46 kgs 

2 PVC Compound 60.17 kgs 

1 KM 1 (a) Copper in the form of Copper 

Cathode/ Wire Bars/ CC Rods 


OR 

Conductors unarmoured/ 1 (b) Aluminium in the form of 

Ingots/ Proper Zi Rods 

* 

*

armoured for Voltage 

upto 1000 V of different 

sizes as given in 

Engineering - Table 6. 

2 a) PVC Compound for Unarmoured 

b) OR PVC Compound for 

Armoured 

c) I) PVC Resin 60% of weight of 

PVC compound 


Table 6. 

c) II) Plasticizer 30% of weight of 

PVC compound 


Table 6. 

c) III) Filler (Calcium 


) 

C43 

* 


PVC compound 


Table 6. 

* Note : The quantity of these item will be as per the Engineering Table 6 given at the end of this product 

group.If the alternative item I.e. PVC Resin, DOP & Filler is sought in lieu of import item No. 2 PVC 

compound, their import shall be permitted to the extent stated below:1. PVC Resin-60% of the permissble 

quantity of PVC compound as per Engg. Table -5.2. DOP-30% of the permissble quantity of PVC 

compound as per Engg. Table -5.3.Filler-10% of the permissble quantity of PVC compound as per Engg. 

Table -5.Wherever PVC stabilizer is asked for it may be allowed upto 3% of the quantity of PVC 

compound, subject to reduction of the same % age in the quantity of PVC resin. 

C271 PVC Insulated Triple 

Core mining cable for 

voltage upto 1100 V of 

different sizes as given in 



Cathode/ CC Rods/ Wire Bars 


* 


* Note : The quantity of these items will be as per the Engineering Table 7 given at the end of this product 

group. 

C272 PVC Insulated Triple 

Core mining cable for 

voltage upto 3300 V of 

different sizes as given in 



Cathode/ CC Rods/ Wire Bars 


* 


* Note : The quantity of these items will be as per the Engineering Table 8 given at the end of this product 

group. 

C273 R Core (Round Shaped, 

Strip Wound Core) 

C274 Radiators for 

Transformers (made out 

of CRCA Steel Sheet/ 

Coil 

1 MT 1 CRGO Steel Strips/Coils 1.24 MT/MT content 


1 kg 1 CRCA Non-Alloy Steel 

Sheets/Coils 

1.05 kg/kg 

Note: In case of Coated/Painted radiators, relevant coating/painting materials may be allowed on actual 

requirement basis upto 10% of the FOB value of export 

C275 Rectifier tanks made of 

CRCA Sheets 

1 kg content 

of import 

item 



secondary 

1.05 kg 

C276 Reflector for 40 W Twin 

Tube Box Type Industrial 

Fitting duly prewired 

with vaccum pressure 


wound open type Ballast , 

1 No. 1 CRCA Sheet 2 kgs.

Power Factor 


Starter, Starter 

Seat,Mains Terminal and 

Lamp Holders. 

C277 Screen Insulation Sleeve 

System 

C278 Single Phase Electrical 

Energy Meter 

C279 Single Phase shell 

construction motors with 

aluminium or cast iron or 

sheet metal end covers - 0 


OR 

Single phase shell 



sheet metal end covers - 0 

watts to 90 wattsunder 

SKD condition 

1 No. 1 Heat Shrinkable Conducting 

Tubing 

C44 

2 Mtrs. 


Tubing 

2 Mtrs. 

3 Heat Shrinkable Stress Control 

Tubing 

0.5 Mtrs. 

4 Anti Tracking Mastic Tape 3.0 Mtrs. 

1 No. 1 Aluminium/ Aluminium Alloy 

Ingots/Sheets 


export. 

2 Brake Magnet/ Bearing Magnets Net to net. 

3 Relevant Plastic/Rubber Parts Net to net. 

4 MS Sheets/Coils/ Strips 1.05 kg/kg content in 

export. 

5 CRNGO Sheets/Coils/ Strips 1.25 kg/kg content in 

export. 

6 Copper Winding Wire 

OR 

Copper Ingots/ Bars/ Rods 

(Electrolytic Grade) 

7 Bearing Assembly Net to net. 

8 Stainless Steel Rods/ Wire Rods/ 

Bar/ Rounds 


export 


the export. 


export. 

9 Registered Assembly 1 No. (Net to net) 

10 Phenolic Resin 1.05 kg/kg content in 


11 Brass Sheets/ coils/ strips/ scraps 1.05 kg/kg content in 






2 Copper wire 


wires/strips 

10.41 gm/Watt 


rotor 




for housing 

OR 


4 CRCA Sheets for housing 

OR 


4 Mild Steel sheets for housing 10.99 gms/Watt 








9 Power Capacitor 1 No. (Net to net)

C280 Single phase shell 



sheet metal end covers - 

91 Watts to 180 Watts 

OR 





91 watts to 180watt under 

SKD condition 

10 Strain relief bush 1 No. 

11 Pull chain switch with chord 1 No. 

12 Aluminium alloy 0.50 kgs 

13 Lead wire 1.175 Mtrs 

14 Power supply chord 2 Nos. 

15 CRCA Steel for end shields, 

mounting base, Lugs & pads 

C45 

1.50 kgs. 

16 Open circuit switch 1 No. 

17 Centrifugal gear 1 No. 

18 Terminal/ Crimp cap 3 Nos. or 4 Nos.(as 

per requirement: 

quantity to be 

accounted for in the 

export product) 

19 Quick connect/ disconnect 

terminals/ receptacles and tabs 

with/ without insulation 

20 Plastic film for labels/ name 

plates 

21 Transfer ribbon for labels/ name 

plates 




3 or 4 sets (as per 

requirements quantity 

to be accounted for in 

the export product) 

10 grams 

8 sq. inches 


2 Copper wire 


wires/strips 

7.19 gm/Watt 


rotor 

5.58 gms/Watt 



for housing 

OR 

6.00 gms/Watt 


OR 

9.00 gm/Watt 












12 Aluminium alloy 0.50 kg 

13 Lead wire 1.175 Mtr 


15 CRCA steel for end shields, 


1.50 kgs 

16 Open circuit switch 1 No.






OR 





181 watts to 750watts 

under SKD condition 


18 Terminal/ Crimp cap 3 Nos. or 4 Nos. (as 

per requirement: 








plates 


plates 




2 Copper wire 


wires/strips 


rotor 



for housing 

OR 


OR 

C46 





10 grams 

8 sq. inches 


2.76 gm/Watt 

2.80 gms/Watt 

2.80 gms/Watt 

4.20 gms/Watt 














14 Power supply chord 2 Nos 



1.50 kgs 




per requirement 







20 Plastic film for labels/ name 10 grams 

3 or 4 sets as per 

requirement quantity 


the export product





751 Watts & above 

OR 





751 watts and 

aboveunder SKD 

condition 

C283 Single Phase 

Transformers above 

100000 KVA 

C47 

plates 


plates 

8 sq. inches 





2 Copper wire 


wires/strips 

1.89 gm/Watt 


rotor 

1.63 gms/Watt 



for housing 

OR 

1.63 gms/Watt 


OR 

2.44 gms/Watt 

















1.50 kgs 




per requirement 








plates 


plates 






OR 

Transformer Oil Base Stock 





10 grams 

8 sq. inches 

0.57 kgs/KVA 

0.09 kg/KVA 

0.21 kgs/KVA 

OR 

0.23Kg/KVA.


Transformers above 

25000 KVA upto 63000 

KVA 


Transformers abvoe 

above 63000 KVA upto 

100000 KVA 

C286 Squirrel cage flame proof 

motor suitable for upto & 

including 660 V, 3 Phase, 

AC supply - 7.5 KW to 

22.4 KW 





56.0 KW 





Tapchanger 






OR 

C48 


0.79 kgs/KVA 

0.16 kg/KVA 

0.58 kgs/KVA 






Tapchanger 

1 No. per Job 



0.66 kgs/KVA 



0.15 kg/KVA 


OR 

0.47 kgs/KVA 

3 Transformer Oil Base Stock 0.52 kgs/KVA 





Tapchanger 





8.48 kgs/KW 

2 Copper wire 


wires/strips 

0.85 kg/KW 

3 Pig iron for housing 8.45 kgs/KW 


rotor 

0.25 kg/KW 

5 EN-8 Alloy Steel for shaft 1.35 kgs/KW 









6.83 kgs/KW 

2 Copper wire 


wires/strips 

0.64 kg/KW 



rotor 

0.21 kg/KW


motors suitable for upto 

& including 660 V, 3 

Phase AC supply - 0 KW 

to 0.75 KW 




Phase, AC supply - above 

0.76 KW to 7.4 KW 

C290 Squirrel cage screen 

protected (SP)/ Drip 

proof (DP) motors 

suitable for upto & 



7.4 KW 










18.48 kgs/KW 

2 Copper wire 


wires/strips 

2.22 kg/KW 



rotor 

0.56 kg/KW 










10.77 kgs/KW 

2 Copper wire 


wires/strips 

1.15 kg/KW 



rotor 

0.31 kg/KW 










9.60 kgs/KW 

2 Copper wire 


wires/strips 

0.91 kg/KW 

3 Pig iron for housing 

OR 

6.79 kgs/KW 



for housing 

2.27 kgs/KW 


rotor 

0.46 kg/KW 











1 No. 1 

2 

Cold Rolled Non-oriented 



Copper wire 

5.94 kgs/KW 

0.68 kg/KW 

C49



22.4 KW 







74.0 KW 



Proof (DP) motors 




374 KW 



Proof (DP) motors 



AC supply - 375 KW & 

above. 

3 


wires/strips 

Pig iron for housing 

OR 

5.05 kgs/KW 



for housing 

1.68 kgs/KW 


rotor 

0.17 kg/KW 










5.24 kgs/KW 

2 Copper wire 


wires/strips 

0.44 kg/KW 


OR 

3.37 kgs/KW 



for housing 

1.12 kgs/KW 


rotor 

0.14 kg/KW 










4.44 kgs/KW 

2 Copper wire 


wires/strips 

0.58 kg/KW 


OR 

2.86 kgs/KW 



for housing 

0.95 kgs/KW 










3.46 kgs/KW 

2 Copper wire 


wires/strips 

0.63 kg/KW 

3 Mild Steel sheets for housing 3.42 kgs.KW 


C50


protected (SP)/Drip Proof 

(DP) Motors suitable for 

upto & including 660 V, 3 

Phase, AC supply - 0 KW 

to 0.75 KW 

C296 Stainless Steel Cable Ties 

made of SS316 Grade 

C297 Rotor/Rotor Stampings 

& Stator Stack/ Stator 

Stampings - (in sets) for 

Electric Motors 

C298 Starter Motor Armature 

for High Speed Vehicles 

Cars etc. 

C299 Stator for Alternator for 

Heavy Duty (12 Volts 

105-190 Amps) 

C300 Stator for Alternator for 

Medium Duty (12 Volts 

95-105 Amps) 








C51 


20.54 kgs/KW 

2 Copper wire 


wires/strips 

1.90 kg/KW 


OR 

14.00 kgs/KW 



for housing 

4.63 kgs/KW 


rotor 

0.71 kg/KW 






1 kg 1 Stainless Steel Strips/Coils of 

316 Grade 

1 kg 1 CRGO/CRNGO/CRCA Steel 

Sheets/Coils 


1.25 kg 



2 Aluminium Ingot 1.06 Kg/Kg content 


1 No. 1 Copper Electrolytic Grade 

Standard Wire/ Bar/Rod/Ingots 

0.900 kg 

2 CRNGO Steel Sheet/ Coil 0.5 to 

1.0 mm thickness 

1.600 kgs 

3 Soldering Wire/ Billet 0.025 kg 

4 Nomex/Hypertherm F3 Ply, 

Grade 33/313 Thickness 0.16 to 

0.21 mm in rolls/sheets or 

equivalent 

0.020 kg 



0.900 kg 

2 CRNGO Steel Sheet/Coil 0.5 to 


4.200 kgs 





equivalent 

0.035 kg 



0.700 kg 

2 CRNGO Steel Sheet/ Coil 0.5 to 


3 kgs 





equivalent 

0.020 kg 

C301 Steel Welding Electrodes 1 Kg. 1 Relevant Mild Steel Wire Rod/ 0.70 Kg

made of Mild Steel/ 

Stainless Steel 

C302 Street Lighting Fittings 

suitable for 40 W F.T.L. 

duly prewired with 

vaccum pressure 


wound open type Ballast, 

Power Factor 


Starter, Starter Seat, 

Mains Terminal and 

Lamp Holders. 

C303 Deleted 

C304 Deleted 

C305 Deleted 

C306 Deleted 

C307 Deleted 

C308 Thermocouple Cartridges 

of Platinum/Platinum 

Rhodium Alloy 

C309 Thermocouple Cartridges 

of PT/PT-13% RH (type- 

R) Mark VII 

OR 

Expandable 

Thermocouple Tips in 

PT/PT 13% RH (Type R) 

with paper tube of 

various length - Mark 

VII 

C310 Three Jar Mixer with 

Stainless Steel Jar for 

Kitchen application 

C52 

Stainless Steel Wire Rod 

2 Low Carbon Ferro Manganese 0.031 Kg 

3 Futile Sand 0.142 Kg 

4 Titanium Dioxide 0.032 Kg 

1 No. 1 CRCA Sheet 1 kg. 

2 Ballast 1 No. 

3 Holders 2 Nos. 


5 Starter 1 No. 

1000 Nos. 1 Thermocouple Wire 0.05 mm 

Diameter Pure Platinum 

OR 

1 Thermocouple Wire 0.05 mm 

Diameter Platinum 13% 

Rhodium (Relevant to be used in 


2 Quartz Glass Tube OD-3 mm, 

ID-2 mm (Relevant to be used in 


100 Nos. 1 Thermocouple Quality Platinum 

Wire Diameter 0.04 mm to 0.06 

mm 

2 Thermocouple Quality Wire 13% 

Rhodium/Platinum Diameter 

0.04 mm to 0.06mm 

3 Quartz Glass Tubes: ID - 2 mm, 

OD - 3 mm 

1.96 gms. 

1.99 gms. 

0.547 kg. 


export. 


export. 

Net to net. 

1 No. 1 Polypropylene Moulding Powder 1.05 kg/kg content in 


2 Natural/Synthetic 

Rubber(Relevent item to be 

allowed) 





4 ABS MouldingPowder 1.05 kg/kg content in 


5 Nylon Moulding Powder 1.05 kg/kg content in 



the export product.

C311 Three Phase Electrical 

Energy Meter 

C312 Tin Plated HDHC 

Copper Bus Bar or 

Electrolytic Grade Tin 

Plated Copper Bus Bars 

or Tinned Copper Strips/ 

Flats 

C313 Tinned Copper Terminal 

Ends 

C314 Tinsel Conductor 

(Flat/Copper/Copper 

Alloy Conductors Spun 

with High Tenacity 

Polyester Filament Yarn) 

C315 Totally enclosed fan 

cooled slip ring induction 



Phase, AC supply - 0 KW 

to 37 KW 



8 Bronze 1.05 kg/kg content in 


9 Phenol Formaldehyde 1.05 kg/kg content in 


10 Stainless Steel Round Bar 1.05 kg/kg content in 


11 Polycarbonate Moulding Powder 1.05 kg/kg content in 


12 Circuit Breaker Assembly Net to net. 

13 Motor of Relevant Rating Net to net. 

1 No. 1 Aluminium/ Aluminium Alloy 

Ingots/Sheets 

C53 


export. 

2 Brake Magnet/ Bearing Magnet Net to net. 

3 Relevant Plastic/ Rubber Parts Net to net. 

4 MS Sheets/Coils/Strips 1.05 kg/kg content in 

export. 

5 CRNGO Sheets/ Coils/Strips 1.25 kg/kg content in 

export. 

6 Copper Winding Wire 

OR 

Copper Ingots/ Bars/ Rods 

(Electrolytic Grade) 


export 


export. 

7 Bearing Assembly Net to net. 

8 Stainless Steel Rods/ Wire 

Rods/Bar/ Rounds 

1 MT 1 Copper Wire Bars/ Ingots 1.05 MT 

1 MT 1 Copper Scrap 

OR 

Copper Tube/ Copper Cathode/ 

Copper Wire Bar/ Billets 


export. 

1.05 MT/MT of 

Copper content in 


1.03 MT/MT content 


1 kg 1 Copper Bars/Rods/Wires 1.03 kg/kg content in 


2 Polyester Filament Yarn of High 

Tenacity(Tenacity More than 7 

gms. denier) 




2 Copper wire 


wires/strips 


OR 



for housing 



10.38 kgs/KW 

1.56 kg/KW 

5.86 kgs/KW 

1.96 kgs/KW


cooled slip ring induction 




75 KW 

C317 Totally enclosed Fan 

Cooled squirrel cage 

induction motor suitable 

for upto & including 660 

V, 3 Phase, AC supply - 0 

KW to 0.75 KW 


cooled squirrel cage 



V, 3 Phase, AC supply - 

0.76 KW to 7.4 KW 










8.76 kgs/KW 

2 Copper wire 


wires/strips 

1.33 kg/KW 


OR 

5.75 kgs/KW 



for housing 

1.92 kgs/KW 










OR 

20.54 kgs/KW 

Relevant Lamination/ Stampings 

core packs (1 No. of stator pack 

and 1 No. of rotor pack) 

1 set per motor 

2 Copper wire 


wires/strips 

1.90 kg/KW 


OR 

14.00 kgs/KW 



for housing 

4.63 kgs/KW 


rotor 

0.71 kg/KW 









OR 



and 1 No. of Rotor pack) 

2 Copper wire 


wires/strips 


OR 



for housing 

C54 


9.60 kgs/KW 

1 Set per motor 

0.91 kg/KW 

6.79 kgs/KW 

2.27 kgs/KW






7.5 KW to 22.4 KW 






22.5 KW to 56.0 KW 






57.0 KW to 374 KW 


rotor 

C55 

0.46 kg/KW 










OR 

8.38 kgs/KW 





2 Copper wire 


wires/strips 

0.76 kg/KW 


OR 

4.78 kgs/KW 



for housing 

1.60 kgs/KW 


rotor 

0.27 kg/KW 










OR 

7.28 kgs/KW 





2 Copper wire 


wires/strips 

0.67 kg/KW 


OR 

4.34 kgs/KW 



for housing 

1.45 kgs/KW 


rotor 

0.21 kg/KW 










6.64 kgs/KW 

2 Copper wire 


wires/strips 

0.95 kg/KW 

3 Pig iron for housing 4.26 kgs/KW






375 KW & above. 

C323 Transformer 

Lamination/cut core 

made of Silicon Electrical 

Steel (CRGO/CRNGO) 

C324 Transformers 

(Aluminium Wound) 

above 100 KVA upto & 

including 400 KVA, 3 

Phase, Oil Cooled 

C56 

OR 



for housing 

1.47 kgs/KW 










4.30 kgs/KW 

2 Copper wire 


wires/strips 

0.76 kg/KW 

3 Mild Steel sheets for housing 4.70 kgs.KW 






1.0 MT 1 CRGO Silicon Electrical Steel in 

Coil Form 




1 No. 1 CRGO Steel/ Sheet/ Coil 

OR 

2.20 kgs/KVA 

CRGO Transformers Lamination Net to net 

2 Aluminium Winding Wires/ 

strips/ ingots/ wire bars 

0.66 kg/KVA 


OR 

2.52 kgs/KVA 


4 Pre-compressed press board 0.30 kgs/KVA 


6 Motorised off-load/ On-load Tap 1 No. (Net to net) 

Changer/Switch 

7 Pre-pressed boards/ moulded 

components 


Note : In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input 

item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted. 

C325 Transformers 

(Aluminium Wound) 

upto & including 100 

KVA 3 Phase, Oil Cooled 


OR 

2.64 kgs/KVA 


2 Aluminium Winding Wires/ 

strips/ ingots/ wire bars 

1.12 kg/KVA 


OR 

3.57 kgs/KVA 




6 Motorised Off-load/ On-load Tap 

Changer/ Switch 

1 No. (Net to net)


components 

C57 


Note 1. In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input 

item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted.Note 2. If in the 

export product, the core is of amorphous electrical steel, then import of 2.6 kg/KVA of "amorphus 

electrical steel sheet/ coil may be allowed in place of import item No. 1 i.e. CRGO Steel laminations/ 

Sheets/ Coil allowed in this norm 

C326 Transformers (Copper 

Wound) above 100 KVA 


KVA, 3 Phase, Oil Cooled 


OR 

CRGO Transformers Lamination 

2.11 kgs/KVA 

2 Copper Winding Wires/ strips/ 

wire bars/ wire rods/cathodes 

Net to net 

1.53 kg/KVA 


OR 

2.31 kgs/KVA 




6 Motorised off-load/ on-load tap 

changer/ Switch 



components 


Note: In case the tranformer are exported without the M.S. Tank and Transformer Oil, then the input 

item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted 


Wound) above 10000 

KVA upto & including 

25000 KVA, 3 Phase, Oil 

Cooled 


OR 

0.99 kgs/KVA 




0.51 kg/KVA 


OR 

0.86 kgs/KVA 

3 Transformer Oil Base Stock 0.95 kgs/KVA. 







components 


Note: In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input 

item No. 3 i.e. Transformer Oil or Transfor Oil Base Stock, shall not be permitted 



KVA , 3 Phase, Oil 

Cooled 


OR 

0.61 kgs/KVA 




0.23 kg/KVA 


OR 

0.42 kgs/KVA 







components 


1 No. (Net to net)








OR 


C58 

1.45 kgs/KVA 



Net to net 

0.92 kg/KVA 


OR 

0.89 kgs/KVA 








components 


Note. In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input 






Cooled 


OR 

0.84 kgs/KVA 




0.39 kg/KVA 


OR 

0.79 kgs/KVA 








components 



item No. 3 i.e. Tranformer Oil or Transformer Oil Base Stock, shall not be permitted. 






OR 


1.71 kgs/KVA 


wire bars/ wire rods/cathodes 

Net to net 

1.22 kg/KVA 


OR 

1.31 kgs/KVA 








components 







OR 


1.12 kgs/KVA 

Net to net





C59 

0.61 kg/KVA 

3 Transformer Oil base Stock. 0.97 kg/KVA 




changer/ switch 


components 



Note. In case the transformer are exported without the M.S. Tank and Transformer Oil, then the input 

item No. 3 i.e. Transformer Oil of Transformer Oil Base Stock, shall not be permitted. 





Cooled 


OR 


0.70 kgs/KVA 



Net to net 

0.29 kg/KVA 


OR 

0.58 kgs/KVA 

3 Transformer Oil Base Stock 0.63 kg/KVA 







components 





Wound) upto & including 


Cooled 


OR 

2.64 kgs/KVA 



wire bars/wire rods/cathodes 

1.55 kg/KVA 

3 Transformer Oil base Stock 3.26Kg/KVA. 







components 




C335 Transformers above 400 

KVA upto and including 

1600 KVA (Aluminium 

Wound) 


OR 

1.17 kg/KVA 

2 


Aluminium Winding Wire/Strips 0.88 kg/KVA 

3 Transformer Oil 1.08 Ltr./KVA 

4 Phenolic Resin Bonded Paper 0.007 kg/KVA 

5 Motorised Off Load/ Onload Tap Net to net. 

Changer/ Switch 


item No. 3 i.e. Transformer Oil or Transformer Oil Base Stock, shall not be permitted

C336 Tungsten Filaments for 

GLS Lamps upto 100 

watts and below 

C337 TV Antenna Motors 

C338 Unplated Conductors of 

Copper 

C339 Voltage (Potential) 

Transformers above 0.66 

KV upto & including 12.5 

KV (Indoor 


of item 1, 2.50 kg of item 

2, 1 kg of item 3, 3 kg of 



transformers above 12.5 

KV upto & including 24 

KV (Indoor 





5) 


Transformers above 145 

KV (Outdoor 




item 5 and 180 or 216 

Ltr. of item 6) 

1000 Nos. 1 Tungsten wire (Black) 42.33 gms 

2 Molybdenum Wire (Black) 71.42 gms 

3 Collodial Graphite 4.233 gms 

100 Nos 1 Shaft elimination worm assy 102 Nos 

2 commutator 206 Nos 

3 Brush 206 Nos 

4 Connector 206 Nos 

5 Pole 206 Nos 

6 Gear 204 Nos 

7 28 Swg Slaper enamel copper 

wire 

7 kg 

1 kg 1 Copper Wire Bar/Rod/Wire 1.02 kg/kg content in 

export. 

2 Copper Clad Steel 1.02 kg/kg content in 

export. 

3 Copper Alloy Wire 1.02 kg/kg content in 

export. 

1 No. 1 CRGO Steel Laminations Sheets/ 18.40 kgs 

Coils 

OR 


Sheets/ Coils 

17.60 kgs 



2.525 kgs 

3 Electrical Grade Insulating Paper 1.10 kgs 




Coils 

OR 


Sheets/ Coils 

22.0 kgs 



4.545 kgs 





Coils 

OR 


Sheets/ Coils 

220.0 kgs 



45.45 kgs 





OR 

189 Litres 


C60



KV (Indoor 





5) 



KV upto & including 72.5 

KV (Outdoor 





of item 6) 


Transformers above 72.5 

KV upto & including 145 

KV (Outdoor 




item 5 and 155 or 186 

Ltr. of item 6) 


Transformers upto & 


(Indoor 

Type)(Containing 7 kg of 

item 1, 1.50 kg of item 2, 




Transformers upto & 


(Outdoor 



Coils 

OR 


Sheets/ Coils 

27.50 kgs 



5.555 kgs 





Coils 

OR 


Sheets/ Coils 

75.90 kgs 



9.09 kgs 





OR 

47.25 Litres 



Coils 

OR 


Sheets/ Coils 

137.50 kgs 



27.27 kgs 





OR 

162.75 Litres 



Coils 

OR 


Sheets/ Coils 

7.70 kgs 



Cathodes 

1.515 kgs 





Coils 

OR 


Sheets/ Coils 

28.60 kgs 

2 Copper Winding Wires/ Strips/ 7.07 kgs 

C61

of item 1, 7 kg of item 2, 4 

kg of item 3, 45 kg of item 

5, 8 kg of item 6 and 30 & 

36 Ltr. of item 7) 

C347 XLPE Cable joint (Heat 

Shrinkable) size 3 X 95 

mm. sq 

C348 Metal Oxide gapless 

lightining Arrester of 

different rating 

(containing different Nos. 

of discs). 

C349 Stainless Steel 

coupling/tees/Elbows. 

C350 Alloy Steel Rough 

Castings 

C62 







OR 

31.50 Litres 

7 Transformer Oil Base Stock 37.80 Litres. 

1 No 1 Hot Melt Adhesive 375 gms 

2 Electrolytic grade copper 99.9 

purity in Rod/ tube form 

600 gms 

3 Self Amalgamating EPR 


8 Mtrs 


Tubing size 115/34 mm 

250 mm 

5 Heat Shrinkable Anti-Tracking 

Weathering Insulating tubing 

32/14 mm 

1.8 mm 



800 mm 

7 Heat Shrinkable conducting 

tubing size 24/65mm 

600 mm 

8 Anti-tracking weathering 

resistance, 3 way break out, 

trifurcating Gloves for H.V. 

Terminations (Large size) - HS 

1 No. 

1 No. 1 Metal Oxide disc of relevant Dia 

dnd thickness (containing 

minimum 80% Zinc Oxide) 

1 MT 1 Alloy Steel (Including Stainless 

Steel) - Bars/Rods/Plates/ 

Billets/Blooms 

2 Consumables viz. Saw Blades/ 

Cutting Tools/ High Speed Steel/ 

Sheets/Bars/Rods/ Coils 

Equivalent to Nos. of 

disc in the export 

product, on net to net 

basis. 

1.50 MT 



1.00 MT 1 Major Raw Materials comprising 

of:a) Non Alloy Steel Melting 

Scrap 

1275 kgs. 

b) Ferro Alloys comprising of: 

i)Charge Ferro Nickel/Nickel 

Oxide Sinter 

OR 

60 kgs. 

Nickel 24 kgs 

1 ii) Ferro Chrome 

iii) Ferro Manganese 20 kgs. 

iv) Ferro Molybdenum 25 kgs. 

v) Ferro Silicon 20 kgs. 

2 Additives comprising of : 5 kgs 

a) Core Wire/Scrap/Ingot/Shots of 

Aluminium 

b)Core Wire/Lumps/Powder of 

Calcium Silicide(CaSi)

c) Selenium 

d) Lumps/Powder of Misch 

Metal 

3 Miscellaneous Items: 

a) i) Resin Coated Sand 360 kgs. 

ii) Organic Binders 160 kgs. 

b) i) Graphite Electrode 6 kgs. 

C63 

ii) Welding Electrode 10.00 kgs. 

iii) Mould Wash/ Mould Coat 25.00 kgs. 

iv) Grinding Wheel 5.00 kgs. 

v) Refractories: 

a) Porous Plugs/Seat 

Blocks/Sleeves/Slide Gate plates 

b)Direct Bonded Basic Bricks 

c) 

Monolithic/Gunning/Ramming/C 

astables 

d) Dolomite/Magnesia Carbon 

Bricks 

30.00 kgs. 

vi) Industrial X-Ray Film 

(Various Grades for Gamma 

Rays Iridium 192 & Cobalt 60) 

9440 Sq. Cm. 

4 Furnace Oil/Diesel Oil for: 

i) Ladle Heating 

ii) Mould Heating 

iii) Heat Treatment 

212 Ltrs. 

Note: 1. The above norm is applicable only if the export products are manufactured through Electric Arc 

Furnace/Induction Furnace Route using melting Scrap as shown at item No. 1(a). 

2. In case the products are manufactured through the Induction Furnace Route, the item 3(b)(i) will not be 

allowed. 

3. In the case of Machined Castings, the above quantities of import items at each Sl.No. are to be 

Multiplied by factors as given below: 

a) Less than 10 kg/piece: = 1.36 

b) 10 kgs. to 100 kgs/piece: = 1.25 

c) More than 100 kgs/piece= 1.15 

C351 Automotive Casting 1 kg 1 Steel Scrap 0.65 kg 

(Machined) above 100 

kgs pc weight 

2 Pig Iron 0.65 kg 


(Machined) above 10 kgs. 

and upto 100 kgs pc 

weight 



(Machined) upto 10 kgs 

pc weight 


C354 Automotive Casting 1 kg 1 Steel scrap 0.60 Kg 

(Rough) 2 Pig Iron 0.60 kg 

C355 Bright bar & Shaftings 

made from magnetic/ 

Nonmagnetic stainless 

steel 

1 kg 1 

2 

Chrome/nickel chrome/nickel 

chrome Moly. Stainless Steel 

rounds/Wire Rods/billets 

Misc. Items : Refractory 

material, lubricating Oil, HSS 

Cutting tool/tungsten carbide 

tool/grinding wheel, furnace oil, 

anti-rust oil, coating chemicals/ 


export 

limited to 4% of FOB 

Value of export

C356 Bright bars and shafting 

other than those made 

from MS and Stainless 

Steel 

C357 Bright bars made out of 

mild steel 

C358 Carbon Steel/Non Alloy 

Steel/Alloy Steel/Stainless 

Steel Forgings(Machined) 

above 10 kgs. Pc. Weight 

Upto 100 kg. Pc. Weight. 



Steel Forgings 

(Machined) above 100 

kgs. Pc. Weight. 



Steel Forgings 

(Machined) Upto 10 kgs. 

Pc. Weight. 



Steel Forgings (Rough) 

C64 

picking inhabitors, die steel 

1 kg 1 Alloy Steel Non-Alloy steel 

Billets/ Rounds/ Wire Rods 

2 Misc. Items : Lubricant Oil HSS 

cutting tools, grinding wheels, 

furnace oil, Anti-rust Oil/ ceating 

chemicals/ Picking Inhabitors 

1 kg 1 MS Rounds/MS Bars/Rods/ 

Billets 

2 Misc. Items : Lubricant Oil HSS 

cutting tools, grinding wheels, 

furnace oil, Anti-rust Oil/ ceating 

chemicals/ Picking Inhabitors 

1 kg 1 Forging Quality Crabon 

Steel/Non-Alloy Steel/Alloy 

Steel/Stainless Steel 

Bars/Rods/Billets/Blooms/Ingots 

(Relevant Materials) 

2 Chemicals: Rust Preventing 

Oil/Primer/ Paints 

3 Misc. Items : Refractory 

material, Die Steel/Die Blocks, 

Cutting Tools, Cutters, Sawing 

Blades, including bimetallic 

bandsaw blades steel shots, fuel 

oil, heat treatment chemicals, 

quenching oil, and lubricants 

1 kg 1 Forging Quality Carbon 




(Relevant Material) 

2 Chemicals Rust Preventing 






bandsaw blades steel shots, fuel 

oil, heat treatment chemicals, 

quenching oil, and lubricants 












bandsaw blades steel shots, 

Relevant Fuel Oil, heat treatment 

chemicals, quenching oil, and 

lubricants 







export 

upto 4% of FOB 

Value of export 


export 

Upto 4 % of FOB 



in export 

Limited to 1% of 

FOB Value of export 


FOB Value of Export 

1.550 Kg/kg content 

in export 






in export 






in export 

2 Chemicals Rust Preventing Limtied to 2% of

C362 Casing Pipes conforming 

to API, Specification 5CT 

or equivalent of OD 114 

mm to 508 mm (4 and 

1/2" to 20") made of 

(a)Seamless Steel Pipes 

OR 

C65 

Oil/Primer/ Paints FOB Value of export 





bandsaw blades steel shots, 

Relevant Fuel Oil, heat treatment 

chemicals, quenching oil, 

andlubricants 



1000 Mtrs. 1 (a)Plain end Seamless Pipes 

OR 

1055 Mtrs 

(b)ERW Steel Pipes of relevant 

dia and grade as the case may be 

1055 mtrs. 

2 Plain end Seamless coupling 

stock 

28 Mtrs 

3 Finished Thread inserts 30 Sets 

(b)ERW Steel Pipes 4 Cross Overs Net to net with 

accountability in the 

export product upto a 

maximum of 5 Nos. 

C363 Cast Iron Spun Pipes 

1 kg 1 Ferro silicon 0.018 kg 


C364 Cast Iron Wheel 1 MT 1 Pig Iron 1.1 MT 

C365 Cold Rolled painted/ 1 MT 1 Hot Rolled steel/strips/coils 1.20 MT 

coated High Tensile steel 

strapping 

2 Paint (water based) PU base/zinc 10 ltrs 

base 

C366 Drill Pipes of OD 60.325 

mm to 168.275 mm OD 

1000 Mtrs. 1 Plain end Seamless pipes of 

relevant Dia 

1020 Mtrs 

equipment to 2-3/8" OD 

to 6-5/8" OD 

2 Tool Joint Forgings/ Plain and 

Hollow Bar Tool Joint Blank 

121 pairs (on net to 

net basis) 

3 Coating material (Optional) 115 Gallons (on net 

to net basis) 

4 Hard Banding Material, such as, 0.24 MT (on net to 

Tungsten Carbide, ARMACOR - net basis) 

M ARNCO 200 XT (Optional), 

TCS 8000, TSS Titanium. 

5 Tube Metal (Optional) 32 kgs (on net to net 

basis) 

C367 File Blanks (made of 

Alloy Steel) 

1 kg 1 Profiles/Bars and Rods of Alloy 

Steel (excluding Stainless Steel) 

1.20 kg/kg of the net 


product. 

C368 Forged Crankshaft 1 No. with 

(Made of Alloy/Non-Alloy specified 

Steel) 

weight 

1 Alloy/Non-Alloy Steel 1.56 kg/kg content in 

Bars/Rods/Billets/Blooms/Ingots export product 

carbon (Non Alloy) steel (only 

relevant steel required is to be 

allowed i.e. against Alloy Steel 

product, Alloy steel and against 

Non-Alloy steel product,to be 

allowed 



Rectangular Die Steel Blocks 

and Die Steel Rounds 

Value. 

3 Furnace Oil 0.5 KL/MT of 

Export. 

C369 Forged-Rolled Carbon 1 MT 1 Carbon Steel Billets 1.23 MT 

Steel Tyres for Railway, 

Carriage and Wagon, Lo- 

2 Misc. Items: 

Die Steel/Die Blocks Cutting 



comotive & Tramcar 

Tools,Cutters,Bimetallic

C370 Front Axle Beam- 

Forgings 

C371 Galvanised Steel 

Stranded Wire (Wire 

Strand) 

1 MT 1 

Bandsaw Blades,Heat Treatment 

Chemicals 

Forging Quality Non-Alloy 

Steel/Alloy Steel in 

Blooms/Billets/Bars 

2 Rectangular Die Steel Blocks & 

Die Steel Rounds 

3 Relevant Consumables including 

consumable tools 

C66 

1.72 MT 

0.025 MT 



4 Furnace oil 0.5 Kilo Ltr 

1000 kg. 1 Ungalvanised Wire of relevant 

grade of steel with or without 

rust preventing coating like 

phosphating / greasing/ waxing 

etc. 

OR 

1 a) Wire Rod of relevant grade of 

steel 

b) Dry Drawing Lubricant/ Coating 8 kg 

c) Tungsten Carbide dies 5 Nos. 

d) Wet Drawing Lubricant 4 kg 

e) Lead (for Patenting) 3 kg 

2 Zinc 40 kg 





Note: Item at Sl.No.1(d) shall be allowed only if strands are made of wet drawn wires of size 1.6mm and 

below. 

C372 Ground Rod made out of 1 MT 

Stainless Steel Scrap 

1 Stainless Steel Scrap 1.15 MT 

C373 High tensile precision 

Fastners Cold/ Hot 

forged Bolts/ Screws-All 

varieties 

C374 High tensile precision 

Fastners Cold/ Hot 

1 kg 1 Cold heading quality steel wire 

rods/ wires/ bars 

2 Misc. Items: Thread Rolling 

Dies/ Knurling dies (Flat/ 

Cylinderical), Forming/ Cutting 

Tools and Tool and Alloy Steel. 

1.0 kg 

1 Cold Heading Quality Steel Wire 

Content 

rods/ Wires/ Bars 

forged Nuts-All varieties 2 Misc. Items: Taps/ Tapnibs 

Forming/ Cutting Tools and Tool 

and Alloy Steel 

1.166 kg 


Value 

1.23 Kg 


Value 

Note: In case the above nuts are surface coated with Bonded Solid Film Lubricant EVERLUBE 6102-G or 

equivalent, the same may also be allowed to the extent of 0.006 Lit/kg of the export product" 

C375 Hot forged nuts 

1.0 kg 1 Mild Steel/Alloy/Non Alloy 

Steel Rounds/Bars/Rods 

OR 

M S Billets 

OR 

MS Billets Cuttings/Bloom 

Cuttings/Re-Rollable Scrap 







Note : 1. In case, the export product is galvanised, in addition to above items, an additional item - Zinc 

shall be allowed @ 4% of net weight of export.(2)If the export product is painted/coated, in addition 

relevant Paint/ Coating Powder may be allowed to the extent of 4% of the FOB value. 

C376 Investment Casting of 

Non-Alloy Steel/Alloy 

Steel including Stainless 

Steel 

1000 Kgs. 1 For Non-Alloy Steel Casting: 

a) Carbon Steel Scrap 1310 kgs. 

2 For Alloy Steel except Stainless 

Steel Castings

a) Alloy Steel Scrap 1310 kgs. 

b) Ferro Alloy for composition 

adjustment(Fe-cr,Fe-v,Fe-Mo,Fe- 

Ni etc.) 

26 kgs. 

3 For Stainless Steel Castings 

a) Stainless Steel Scrap 1310 kgs. 

b) Ferro-Alloy for composition 

adjustment(Fe-cr,Fe-v,Fe-Mo,Fe- 

Ni etc.) 

OR 

26 kgs. 

3 a) Electrolytic Pure Iron 1310 kgs. - Total 

ammount of Ferro 

Alloys 

b) Amount of each Ferro Alloy as 

per composition of Stainless 

Steel 

OR 

3 a) Stainless Steel Scrap/Electrolytic 

Iron 

b) Amount of each Ferro Alloy as 

per composition of Stainless 

Steel (in kgs.) 

2 Additives: 

a) Ferro Manganese/Ferro 

Silicon/Aluminium 

30 kgs. 

3 a) Waxes (Paraffin Wax/Micro 

Crystalline Wax) 

63 kgs. 

b) Resin (Resin Derivatives, Tree 

Derivatives, Hydrocarbon resin 

from Petroleum) 

50 kgs. 

c) Plastics (Polyethylene, Ethyl 

Cellulose, Nylon, Ethylene- 

Vinyl-Acetate, Ethylene-Vinyl- 

Acrylate) 

13 kgs. 

d) Filler and other additives 

(Polystrene, Discarboximide, 

Methylene Tetramine, 

Isophathalic Acid) 

31.4 kgs. 

4 Material for Ceramic Shell 

Mould: 

a) Colloidal Silica/Ethyl 

Silicate/Hybrid Binder 

66 kgs. 

b) Zircon/Zircon Powder/ 

Sand/Silica 

Glass/Alumina/Aluminium 

Silicate 

1034 kgs. 

c) Wetting agent(Sodium Alkyl 

Aryl Sulphonate, Sodium Alkyl 

Sulphate) 

31 Ltrs. 

d) Anti Foam (Aqueous-Silicone- 21 Ltrs. 

C67 

1310 kgs X %age of 

Alloying elements in 

casting 

------- 

%age of Alloying 

element in Ferro 

Alloy 

1310 kgs. - Total 

ammount of Ferro 

Alloys 

1310 kgs. Stainless 

Steel Scrap X %age 

of Alloying elements 

in casting 

------- 

%age of Alloying 

element in Ferro 

Alloy

C377 Iron Casting (Machined) 

above 10 kg & upto 100 

kg pc wt (not elsewhere 

specified) 


above 100 kg pc wt (not 

elsewhere specified) 


upto 10 kg pc wt (not 

elsewhere specified) 

C380 Iron Casting (Rough), not 

elsewhere specified 

1 kg Content 

of Import 

Item 

1 kg Content 

of Import 

Item 

1 kg Content 

of Import 

Item 

1 

Emulsion, Liquid Fatty Alcohol) 

Pig Iron 1.25 kg 



1 MT 1 Major Input comprising of Pig 

Iron/ CI Scrap/ Steel Melting 

Scrap 

2 Low Ash Met. Cocke (Ash: 

Below 15%) 

3 Ferro Alloy comprising of FeSi 

& FeMn: 

4 Other inputs comprising of 

Fireclay and Fired silica 

Refractory (Bricks/ Mass), 

Grinding Wheel and Black 

Bituminous Paint 

5 Packing Material (MS Round 

bars/ Flats/ Strips for crating and 

stuffing) 

C68 

1100 kg 

110 kg 

5 kg 

CIF value of all these 

items taken together 


FOB value of 

exports. 


Policy. 

Note: Out of the total quantity of the input permitted against item No.1 above, the quantity of steel melting 

scrap shall be restricted to 5% of the said total quantity. 

C381 Deleted 

C382 Manganese Steel Rough 

Castings 


of: 

a) Non Alloy Steel Melting Scrap 890 kgs. 


i) Charge Ferro Nickel/Nickel 10 kgs. 

Oxide Sinter 

OR 

Nickel 4 kgs. 

ii) Ferro Manganese 

iii) Ferro Molybdenum 

iv) Ferro Silicon 

2 Additives comprising of: 

a) Core Wire/Scrap/Ingots/Shots 

of Aluminium 


a) i) Resin Coated Sand 

280 kgs. 

20 kgs. 

40 kgs. 

1.50 kg 

360 kgs. 


b) i) Graphite Electrode 6 kgs. 








30.00 kgs.

c) 


astables 


Bricks 




9440 Sq. Cm. 





212 Ltrs. 




allowed. 






C383 Manhole Cover 1 MT 1 Major Input comprising of Pig 


Scrap 

1100 kg 


Below 15%) 

110 kg 


& FeMn: 

5 kg 








stuffing) 

C69 




FOB value of 

exports. 


Policy. 



C384 Non Alloy Steel Rough 

Castings 


of: Non Alloy Steel Melting 

Scrap 

1360 kgs. 


a) Core Wire/Scrap/Ingots/Shots 

of Aluminium 


Calcium Silicide(CaSi) 

c)Lumps/Powder of Misch Metal 

d)Ferro Silicon 

e)Ferro Manganese 

40 kgs. 




3 b) i) Graphite Electrode 6 kgs. 




v) Refractories: 30.00 kgs.




c) 


astables 


Bricks 




9440 Sq. Cm. 





212 Ltrs. 




allowed. 






C385 Non-Alloy Steel - 

Flanges/Couplings/ 

1 MT 1 Non-Alloy Steel - 

Bars/Rods/Plates/ Billets/Blooms 

Tees/Elbows 2 Misc. Items viz. Saw Blades/ 

Cutting Tools/ High Speed Steel/ 

Sheets/Bars/Rods/ Coils 

C386 Non-Alloy Steel Forgings 

C387 Non-Alloy Steel 

forgings(Rough) 

C388 Nuts Milled from bar 

process 

C389 Painted Slotted Angles 

C70 

1.65 MT 



1 kg 1 Forging Quality non-Alloy steel 

(with less than 0.6% carbon) in 

blooms/ billets/ bars 

1.470 kg 

2 Rectangular die steel blocks and 

die steel rounds 

0.025 kg 

3 Fuel Oil (Light diesel oil) 0.05 Kg. 

1 kg 1 Non-Alloy Steel 


1.0 kg 

Content of 

Import Item 

2 Relevant Packing Material & 

Chemicals LDPE, Rust 

Preventing Oil/Primer/Paints 

1.470 Kg./Kg. 



FOB Value 



Refractory material Die Steel/Die FOB Value. 

Blocks, Cutting Tools, Cutters, 

Sawing Blades, including 

Bimetallic Bandsaw Blades Steel 

Shots,Fuel Oil,Head treatment 

Chemicals,Quenching Oil & 

Lubricants. 

1 MS/Alloy/Non -Alloy Steel 1.650 kg 

Rounds/Bars 

1 MT 1 Hot Rolled/Cold Rolled Carbon 

Steel Coils/Sheets/Plates 

2 Paint/Primer Top Coat and 

Backer 

OR 


in export 

69 Ltrs 

Epoxy Powder Upto 4% of FOB 

value of Exports

C390 Powrah/Hoe/Pickaxe/Kudali/Pick 

Mattock/ 

Cutter Mattock/ 

Trowel/Transplantor 

/Fork/Cultivator/Weeder/ 

Bulb 

Planter/Combination 

Tool made of Non Alloy 

Steel/ Alloy Steel 

(including Stainless 

Steel). 

C391 Production tubing of OD 

60.325 mm to 114.3mm 

OD equivalent to 2-3/8" 

OD to 4-1/2" OD 

C392 Sanitary Castings 

1.0 kg 1 Non-Alloy Steel/Alloy Steel 

(including Stainless Steel) 

Round/ Billets/ Plates/ Coils 

C71 



2 Epoxy Powder 1.20 kg/kg content in 


1000 Mtrs. 1 Plain end Seamless Pipes of 

relevant Dia. 

1055 Mtrs 

2 Plain end Seamless coupoling 

stock 

23 Mtrs 

3 Coating material (Optional) 115 Gallons (on net 

to net basis) 

4 Finished thread inserts 30 Sets (on net to net 

basis) 

5 Cross Overs Net to net with 


export product upto a 

maximum of 5 Nos. 

1 MT 1 Major Input comprising of Pig 


Scrap 


Below 15%) 


& FeMn: 








stuffing) 

1100 kg 

110 kg 

5 kg 




FOB value of 

exports. 


Policy. 



C393 Spheroidal Graphite/ 

Malleable/Ductile iron 

castings (Rough). 

1. M.T. 1 Cast Iron Scrap/Pig Iron/Steel 

Melting Scrap 

1330 kg 

2 Ferro Silicon Magnesium/Nickel 

Magnesium Alloy 

40 kg 

3 Ferro Silicon/Ferro Manganese * 

Please see note 3. 

4 Inoculant containing 

strantinum/Barium/Calcium/Zirc 

onium/and other rare earth 

materials 

20 kg 

5 Refractory Materials: Graphite 

Stopper/Ramming Mass/Basic 

Acidic ref sleeves/Magnesite 

Bricks 

30 kg 

6 Graphite Fines/Petroleum Coke 30 kg 

7 Mold Coat 16 kg 

8 Resin Coated Sand 160 kg

9 Industrial X-Ray Films 9440 Sq.Cm. 

Note: 1. In case of Machined Castings, the above quantities of import items are to be multiplied by factors 

as given below:- 

Machine Casting Weighing: 

(a) Less than 10 kg/piece - 1.36 

(b) 10 kg to 100 kg/piece - 1.25 

(c) More than 100 kg/piece - 1.15 

2. Zinc is to be allowed @ 1% of the net weight of casting , if it is electroplated and @4% if it is glavanised. 

* 3.Import of item 3 shall not exceed 10% of CIF Value of Licence.4. Steel Melting Scrap shall be allowed 

@ 20% of the total requirement.5. Items 2,3 & 4 will not be allowed for export of Malleable iron Castings. 

C394 Stainless Steel Rough 

Castings 


of: 

a) Stainless Steel Melting Scrap 690 kgs. 

b) Iron Flakes/Pure Iron/Iron 

Powder 

310 kgs. 

c) i)Ferro Chrome 

ii)Charge Nickel Oxide 

Sinter/Ferro Nickel 

OR 

320 kgs. 

1 c) i)Ferro Chrome 70 Kgs 

C72 

ii)Nickel 100 Kgs 

iii) Ferro Manganese 10 kgs. 

iv) Ferro Molybdenum 

v)Ferro Silicon 

50 kgs. 

20 kgs. 

2 Additives comprising of : 5 kgs 

a) Core Wire/Scrap/Ingot/Shots of 

Aluminium 


Calcium Silicide (CaSi) 

c) Selenium 

d) Lumps/Powder of Misch 

Metal 




3 b) i) Graphite Electrode 6 kgs. 








c) 


astables 


Bricks 

30.00 kgs. 




9440 Sq. Cm. 





212 Ltrs.

Note: 1. The above norm is applicable only if the export product is manufactured through Electric Arc 



allowed. 






C395 Steel backed tin based 

white metal (babbit) alloy 

bimetal strip generally 

confirming to SAE 12 or 

equivalent 

C396 Deleted 

C397 Thermostatic type 

Bimetal/Trimetal Strip of 

Various Grades and parts 

thereof 

100 Kgs 1 CR Steel 77.00 Kgs 

2 Tin Ingots/Scraps 31.85 Kgs 

3 Copper Wire 

Bars/Cathodes/Ingots/Rods/Scra 

p 

1.24 Kgs 

4 Antimony Ingots/Scraps 2.30 Kgs 

1 kg 1 Controlled Expansion Alloys: 

Cold Rolled Strips of maximum 

thickness of 1.85 mm and 

minimum thickness of 1.27 mm 

and 73 mm width 

a) H.E. Alloys: 

1) Alloy with 20% Nickel, 6% 

Manganese and balance Ferrous 

2)Alloy with 22% Nickel, 3% 

Chrome and balance Ferrous 

C73 

3)Alloy with 72% 

Manganese,10% Nickel and 18% 

Copper. 

4)Relevant Grade of Stainless 

Steel 







1.10 kg/ kg content in 


5)Nickel 1.10 kg/ kg content in 


6)Copper 1.10 kg/ kg content in 


b) L.E. Alloys : 

1) Alloy with 36% Nickel and 

balance iron 

2) Alloy with 42% Nickel and 

balance ferrous 

3)Alloy with 48% Nickel and 

Balance ferrous 







C398 Cast Iron Weights 1 kg 1 Pig Iron 1.100 kg 

C399 Alloy Steel Hack-Saw 1 kg 1 Alloy Steel Strips/Sheets/Coils 1.20 kg 

Blades 2 Misc. Items such as Cutters, 

Setting Wheels, Progressive Dye 

& Punch, Berkatekt 

Upto 2.5%of FOB 

value of export 

C400 Cast Iron Vice 

1 kg 1 Pig Iron 1.29 kg/kg content in 


2 Non Alloy Steel Rounds/ Bar 1.65 kg/kg content in 


3 Alloy/Non-Alloy Steel Flat/ Plate 1.50 kg/kg content in 


4 Coal/Coke 0.15 kg/kg of export 

product.

C401 Chisels made of forging 

quality carbon steel 

C402 Coil spring Expander for 

Piston Ring (Round) 

C403 Cut off Blades made out 

of High Speed Steel 

Cobalt/Non-Cobalt 

Grade 

C404 Diamond Impregnated 

Segments - Big Block 

Cutter: 

Segmented Circular/ 

Frame saw blade dia 

1600mm to 3500mm 

fitted with diamond 

impregnated segments. 

5 Paints/Primers/ Solvents 10 gms/kg of export 

product. 

6 Misc. Items: cutting tools like 

drills, cutters, sawing blade, 

bimetallic hand saw blades, steel 

shots, refractory bricks, heat 

treatment chemicals. 

1 kg 1 Forging Quality carbon steel 

round/Plates 

2 Die Steel Block consumable 

quench oil 

C74 



1.35 kg/kg in export 

product. 



1 No. 1 Spring Steel Wire 1.39 kg/kg content in 

export. 

2 Surface Activation/Cleaning 

Chemicals 


Roller Feeds/ Coiling Tools/ 

Wire Guide/ Cutting Tools/ Pitch 

Tools/ Coiling Finger/ Nose 

Plier/ Wire Cutter 

1 MT 1 High Speed Steel Sheets/Coils 

(Cobalt/Non-Cobalt Grade) 




value of exports 

1.57 MT 

1 No. 1 Industrial Dimond Powder 

Synthetic 

3.10% 

2 Cobalt Matric Powder/ Metal 

Matric Powder/ Cobalt Metal 

Powder 

103% 

3 Graphite Synthetic 3% of FOB Value 

4 Steel Blanks- (Circular Disc/ 

Frame) 

1 No (Net to Net 

basis) 

Percentage of raw material requirement is net weight of the Diamond impregnated Segments in the 

resultant product. 


Segments - Block Cutter- 

Single Blade: 


Frame saw blade dia 

900mm to 1500mm fitted 

with diamond 


1 No 1 Industrial Dimond Powder 

Synthetic 

2.50% 



Powder 

103% 



Frame) 


basis) 




Segments - Multi Blade 

Single Spindle Tiling 

Cutters/ Saws/ Blades - 

Segmented Circular saw 

blade of various sizes 

fitted with Diamond 

Impregnated Segments. 


Synthetic 

2.60% 



Powder 

103% 



Frame) 


basis) 


resultant product.


Segments - Slabbing and 

Edge Cutting: 


frame saw blade dia 

200mm to 850mm fitted 

with diamond 


1 No 1 Industrial Dimond Powder 

Synthetic 

C75 

2.20% 



Powder 

103% 



Frame) 


basis) 



C408 Diamond Impregnated 1 Kg 1 Industrial Diamond Powder 2.20% 

Segments - Slabbing and 

Synthetic 

Edge cutting Diamond 

2 Cobalt Matric Powder/ Metal 103% 


Impregnated segments 

Powder 

for circular saw dia 200 

3 Synthetic Graphite 3% of FOB Value of 

mm to 850 mm 

Export 




Segments -Other 

Segmented Circular 

Saw/Frame Saw blade 

not covered under items 

at Sl. No. 404 to 407. 


Synthetic 

2.25% 



Powder 

103% 



Frame) 


basis) 




Segments: Big Block 

1 Kg 1 Industrial Diamond Powder 

Synthetic 

3.10% 

Cutter Diamond 



MM to 3500 mm 

2 

3 

Cobalt Matric Powder/ Metal 


Powder 

Synthetic Graphite 

103%% 

3% of FOB Value of 

Export 




Segments: Block cutter- 


Synthetic 

2.5% 

single blade Diamond 



mm to 1500 mm 

2 

3 



Powder 


103% 


Export 




Segments: Multiblade 


synthetic 

2.6% 

Single Spindle Tilling 

Cutters/ Saws/ Blades - 

Diamond impregnated 

Segmen ts of various sizes 

2 

3 



Powder 


103% 


Export 

Percentage of raw material requirement is net weight of the Diamond impregnated Segments in the

esultant product. 


Segments: Other 

Diamond impregnated 

segments not covered 

under items at Sl.Nos. 


Synthetic 



Powder 

C76 

2.25% 

408,410 to 412. 3 Synthetic Graphite 3% of FOB Value of 

Export 



C414 Drop forged Pliers of 

Alloy/ Non-alloy steel 

1 kg 1 Alloy/Non-Alloy Steel 

Flats/Plates 

2 Rigid PVC Granules for PVC 

Sleevings 

3 a) Die Steel Blocks/ Die Steel 

Plates 

b) Misc. Items/cutting tools like 

highchromium steel bars, milling 

cutters, quenching oil, hydraulic 

oil 

103% 

2 kg/kg in the export 

product. 

1.05 kg/kg conent in 




C415 Hacksaw Frame 1.0 kg 1 H. R. Non Alloy Sheet/Flats 1.10 kg/Kg content in 


C416 Hand Drill 1.0 kg 1 Non-Alloy Steel rounds 1.10 kg/Kg content in 


C417 High Speed Steel Square, 

Rectangular and Round 

Cobalt & Non-Cobalt 

Grade Tool Bits of Cross 

Sectional Area less than 

or equal to 150 mm2 

C418 High Tensile precision 

Industrial 

Wrenches/Socket kays of 

different cross section. 

C419 Jigsaw Blades/ Sabresaw 

Blades/Body Saw Blades 

C420 PCB Drills made from 

composite blanks of 

stainless steel and 

Tungsten Carbide of Drill 

Diameter, 0.05 MM to 1.5 

MM with shank dia of 

3.175 MM and overall 

length of 38.10 MM 

1 MT 1 High Speed Steel Cobalt bearing 

and Non Cobalt Bearings Square 

Rectangular and Round bars 

1 kg 1 Bright cold drawn Alloy Steel 

Bars/Coils of similar Cross 

Section. 

1 kg 1 Relevant High Speed Steel 

Strips/Bimetal Strips 

1000 Nos. 

1 

1 

1 

a) 

b) 

Composite Blanks of Stainless 

Steel and Tungsten Carbide with 

Dia 3.23+ / - 0.2 MM, Pin Dia 

1.60+ / - 0.20 MM and Length 

39+ / - 1.00 MM 

OR 

Stainless Steel shank of dia 

3.23+ / - 0.20 and 28+ / - 2 MM 

overall length 

Tungsten Carbide pin of dia 

1.60+ / - 0.20 and 16.00+ / - 2 

MM overall length. 

2 Flute Grinding Diamond Wheel, 

Marking Solution and Ultrasonic 

Solution 

1.25 MT 

1.10 Kg 

1.57 kg 

1050 Nos. 

1050 Nos. 

1050 Nos. 


Value. 

C421 PCB Drills of Solid 1000 Nos. 1 Solid Tungsten Carbide Blanks 1050 Nos.

Tungsten Carbide of 

diameter 0.05 MM to 1.5 

MM and with shank 

diameter of 3.175 MM 

and overall length of 

38.10 mm 

C422 Pipe Wrenches 

Dia 3.25+ / - 0.2 MM x Length 

39+ / - 1.00 MM 

2 Flute Grinding Diamond Wheel, 

Marking solution and Ultrasonic 

Solution 

C77 


Value. 

1 kg 1 Non-Alloy Steel Plate/ flats/ Bars 1.84 kg/kg content in 



Rounds 

b) Misc. Items/ Cutting tools like 

broches, drills, grinding wheels, 

belts, hand saw blades, 

quenching oil 



C423 Punches 1.0 kg 1 Non-Alloy Steel round 1.10 kg/Kg content in 


C424 Scissors 1 kg. 1 CRCA Sheet 1.800 kg 

C425 Screw Drivers (Nickel 

plated) 

C426 Spanners made of alloy/ 

Non-alloy steel 

C427 Stainless Steel Rules of 

variety 'x' (manufactured 

by photo chemicals 

machining process) 

1 kg. 1 Non-Alloy Steel Round 1.10 kg/Kg content in 


2 Nickel 0.0097 kg 

1 kg 1 Alloy/Non-Alloy Steel Plates/ 

Flats/ Bars 



2 Nickel 0.97% of the net 

weight of export 

product to be plated. 


Rounds 

b) Misc. Items: Cutting Tools like 

Broaches, Drills, Grinding 

Wheels, Belts, Hand Saw Blades, 

Quenching Oil 

4 Electroplating Salts and 

Additives, Like Brighteners, 

Carriers, Buffering agents, 

Leveling agents, Filter aids, 

Purification aids,Stabilizers, 

complexers etc. 

1 kg 1 CR Stainless Sheets/Coils of 

variety `x' 

C428 Steel files of Alloy Steel 1 kg 1 Profiles/ bars and rods of Alloy 

steel (excluding stainless steel) 

C429 Steel files of High Carbon 

Steel 

C430 Steel Tapes/Rules (1 mtr. 

to 50 mtrs.) 

C431 Steel Vices 





1.40 kg 

1.25 kg 

1 kg 1 Profiles/ bars and rods of high 

carbon (Containing 0.6% or more 

carbon) 

1.25 kg 

1 kg 1 Carbon Steel sheet/ Coil/ Strip 1.10 kg/kg content in 


2 ABS Copolymer 1.05 kg/kg content in 

export 

3 Spirit level vials (to be allowed 

only when fitted in the resultant 

product) 

Net to net 

1 kg 1 Non Alloy Steel Plate/ Flat/ Bar 1.65 kg/kg content in 


2 Non Alloy Steel Round/ Bar 1.65 kg/kg content in 

export product.

C432 Automatic Socks Knitting 

Machine (Mechanical) 

3 Paint/ Primer/ Solvent 10 gms./kg of export 

product. 

4 a) Die Steel Block 

b) Misc. items: Cutting tools like 

drills, milling cutters, sawing 

blade, bimetallic hand saw 

blades, steel shots, welding 

electrode, heat treatment 

chemicals 

1 No. 1 Control Box for Socks Knitting 

Machine 

C78 



1 No. 

2 Electric Motor 1 No. 

3 Actuator 3 Nos. 

4 Proxmity Switch 2 Nos. 

5 Threads Cutter 1 No. 

6 Aspirator 1 No. 

7 U. Tube 1 No. 

8 Air Valve 1 No. 

9 Air Filter 1 No. 

10 Needle Protector 2 Nos. 

11 Connector 1 No. 

12 Needles 325 Nos. 

13 Ejector Box 1 No. 

14 Bearing 8 Nos. 

15 Knitting Elements: 

a) Sinker 325 Nos. 

b) Jacks 325 Nos. 

c) Hooks 325 Nos. 

16 High Carbon High Chromium 

Bar 

45.5 kgs. 

17 Alloy Steel Bar EN 36 Grade 45.5 kgs. 

C433 Card Wires 1 kg 1 High Carbon Steel Wire Rods 1.170 Kg 

C434 Circular Knitting Pins 

(Aluminium) 

C435 Computerised Automatic 

Power Socks Knitting 

Machine 



2 Nylon Monofilament Yarn of 

relevant denier (Relevant Nylon 

Grade in export i.e. 6 or 66 to be 

allowed) 


export. 

3 PVC Sheeting Net to net. 

1 No. 1 Electronic Control Box for Socks 1 No. 

Knitting Machine 

2 Counting Unit (Encoder) 1 No. 

3 Electric Motor 1 No. 

4 Actuator 4 Nos. 

5 Cylinder for Main Drum 

Movement with Pipeline and 

Connector Complete 

2 Nos. 

6 Proxmity Switch 2 Nos. 

7 Cylinder for yarn finger with 20 Nos.

C436 Contour Tape 

C79 

pipeline & connector complete 

8 Oil Lubricator 1 No. 

9 Thread Cutter 1 No. 

10 Aspirator 1 No. 

11 U. Tube 1 No. 

12 Air Valve 1 No. 

13 Air Filter 1 No. 

14 Needle Protector 2 Nos. 

15 Fixed Guard yarn 40 Nos. 

16 Rotating Guard Yarn 10 Nos. 

17 Connector 1 No. 

18 Needles 325 Nos. 

19 Ejector Box 1 No. 

20 Bearing 8 Nos. 

21 Knitting Elements: 

a) Sinker 325 Nos. 

b) Jacks 325 Nos. 

c) Hooks 325 Nos. 

22 High Carbon High Chromium 

Bar 

45.5 kgs. 

23 Alloy Steel Bar EN 36 Grade 45.5 kgs. 

24 Floppy Disc unit 1 No. 

1 kg 1 CRCA Steel Sheet/Coil in 0.3 

mm and 0.45 mm thickness 

0.53 kg 

2 Carbon Black 0.04 kg 

3 Rubber Chemicals (Accelerator 

and Zinc Oixde) 

0.02 kg 

C437 Cylinder Wires 1 kg 1 High Carbon Steel Wire Rods 1.290 Kg 

C438 Doffer Wires 1 kg 1 High Carbon Steel Wire Rods 1.231 Kg 

C439 ENDCAP 1.0 kg 1 Non-Alloy Steel rounds/HR 

Sheet/Plate 



C440 Flat Tops 1 kg 1 High Carbon Steel Wire Rods 1.02 kg/kg content in 


C441 Hydraulic End Cap 1.0 kg 1 Non-Alloy Steel rounds/HR 

Sheet/Plate 

C442 Hydraulic Press 1 No. 1 Relevant Components for 

assembly of Machine 

C443 Injection moulding 

machine parts: Deckel 

/Cover 

1.0 kg 1 Non-Alloy Steel rounds/HR 

Sheet/Plate 

C444 Injection Piston 1.0 kg 1 Non-Alloy Steel rounds/HR 

Sheet/Plate 

C445 Lincker-in-Wires 1 kg 1 High Carbon Steel Wire Rods 1.337 kg 

C446 Plastic Extrusion Plants 

& Machineries Rigid 

PVC & HDPE Pipe Plant, 

1 No. Any and /or all following items 

which are actually required in 

export product: 



Net to net. 





Bag Maker Machine, 1 Plastic Bearing 102/100nos. content 

in export product.

Film Plants such as 

PP/HM/HDPE/LD/LLD/ 

PVC Film Plant, Tape 

Plant, LD Foam film 

Plant, Extrusion Plant, 

Single Screw Plant, 

Mixer, Cooler, PVC Wire 

& Cable/Spring coating 

plant with/without 

caterpillar, Single 

spindle, torque motor 

winder with/without Dies, 

Three layer plant, waste 

Recycling plant, twin 

screw pipe plant, pipe 

corrugator plant, 

pelletising plant, box 

strapping monofilament, 

fabrilating plant, casing 

& caping plant, profile 

making 

plant,reprocessing/lamina 

tion/Vented Extrusion 

Plant. 

2 Photo Cells 102 Nos/ 100 Nos. 


product. 

3 Round Belt 102 Nos/ 100 Nos. 


product. 

4 Teflon Adhesive Tape 105 Meter/ 100 Meter 


product. 

5 Energy Regulator Net to Net. 

6 Melt Pressure Transducer Net to Net. 

7 Electro Modules (clutch brake 

modules) 

Net to Net. 

8 Roraty Union Net to Net. 

9 Various bearing such as Ball 

Bearing, Cylin- Drical Roller 

Thrust Bearing, Tandem Bearing, 

Slewing Bearing, Needle Roller 

Bearing, Cylinderc Roller Thrust 

Bearing etc. 

Net to Net. 

10 T Die for Films/ Sheets Net to Net. 

11 Machine Knief/ Ring String 

Cutters 

Net to Net. 

12 Nylon Tube 110 Meter/ 100 Meter 


product. 

13 Timing Belt 102 Meter/100 Meter 


product. 

14 Deltron Rod 102 Nos/100 Nos 


product. 

15 Micro-Switches Net to Net. 

16 Hopper-Autoloader Net to Net. 

17 Float-Switches Net to Net. 

18 Extruder Thrust Box Net to Net. 

19 Gravimetric Mass through put 

recording (IGS) weight per meter 

control system (Inox Saveomat 

or equivalent system) 

Net to Net. 

20 Compact Ball Bearing Linear 

Motion Bearing 

Net to Net. 

21 Hopper Dryers Net to Net. 

22 A.C./D.C Motors Net to Net. 

23 Frequency Control Drives Net to Net. 

24 Voltage Stabilizer/ Transformer Net to Net. 

25 Thyristor Drives Net to Net. 

26 Thyristor Modules Net to Net. 

27 Temperature Controllers Net to Net. 

28 Gear Boxes (Worm/Helical/ 

Platnetary) 

Net to Net. 

29 Plumber Blocks Net to Net. 

30 Flange Bearing Blocks Net to Net. 

C80

31 Thermocouples Net to Net. 

32 Electrical Contactors 102 Nos./ 100 Nos. 


product. 

33 Electrical Relays 102 Nos./ 100 Nos. 


product. 

34 Moulded Circuit Breakers 102 Nos./ 100 Nos. 


product. 

35 IC'S (Intergated Circuits) Net to Net. 

36 Sub-assy. OF P.C.B. Net to Net. 

37 Electrical Wires & Cables 102 Nos./ 100 Nos. 


product. 

38 C.R.Defective Sheets Net to Net. 

39 Alloy Steel Round Stock/Bar 105 kgs/100 kgs 

content product. 

40 HR Sheets/Coils 105 kgs/100 kgs 


product. 

41 Aluminium/Alloy Castings Net to Net. 

42 Brass Scrap 105 kgs/100 kgs 


product. 

43 Aluminium Pipe Net to Net. 

44 Acrylic Cylinder Net to Net. 

45 Oil Pressure Switches Net to Net. 

46 Temp. Thermo Stat Switches Net to Net. 

47 Slurry Pumps Net to Net. 

48 Hydraulic Screen Changer Net to Net. 

49 Hydraulic Powerpacks Net to Net. 

50 Pneumatic Cylinders Net to Net. 

51 Rodless Pneumatuc Cylinders Net to Net. 

52 Solenoid Valves Net to Net. 

53 Proximity Switches Net to Net. 

54 Ammeters Net to Net. 

55 Voltmeters Net to Net. 

56 Infra Red Ceramic Heaters Net to Net. 

57 Cartridge Heater Net to Net. 

58 Ceramic Heaters Net to Net. 

59 Blowers Net to Net. 

60 Loadcells 102 Nos./ 100 Nos. 


product. 

61 Limit Switches 102 Nos./ 100 Nos. 


product. 

62 HRC Fuses 102 Nos./ 100 Nos. 


product. 

C81

63 Roller Chains 102 Meters/ 100 

Meters content in 


64 Sprockets Net to Net. 

65 Oil Seals Net to Net. 

66 Nylon Rod & Sheets 110 kgs/100 kgs 


product. 

67 Semi Conductor Fuses 102 Nos./ 100 Nos. 


product. 

68 Acrylic Sheets 110 Nos./ 100 Nos. 


product. 

69 Gaskets Net to Net. 

70 Silicon Gaskets Net to Net. 

71 Expanded PTFE Gaskets Net to Net. 

72 Pneumatic Fittings Net to Net. 

73 Polyurthene Tubings 105 Meters/ 100 



74 Airlifter Cum Regulator Assy. Net to Net. 

75 Air Expanding Reel Shaft Assy. Net to Net. 

76 Neoprene/Hiplon/ Silicon 

Rubber Rollers 

Net to Net. 

77 Mirror Finish Chrome Plated 

Chilled Roll 

Net to Net. 

78 Fabrillitting Rollers Net to Net. 

79 Needle Pin 102 Nos./ 100 Nos. 


product. 

80 Molycoat Grease Net to Net. 

81 Infra Coat Grease Net to Net. 

82 Iso Flex 3000 al temp. Grease Net to Net. 

83 Ring Magnets Net to Net. 

84 Camshaft Net to Net. 

85 Cam Follower Net to Net. 

86 Yarn Guide Net to Net. 

87 Star Tolerance Rings 102 Nos./ 100 Nos. 


product. 

88 Electronic Tension Controller 102 Nos./ 100 Nos. 


product. 

89 Linear Drive Unit Net to Net. 

90 Embossing Wheel Net to Net. 

91 Mould Blocks Net to Net. 

92 Corrugator Dies & Die Heads Net to Net. 

93 Track Rollers Net to Net 

94 Nylon Sandwitch Flat Belt 102 Meters/ 100 


C82

C83 


95 Low Voltage Heating Element 102 Nos./ 100 Nos. 


product. 

96 Ten Turn Potentionmeter 102 Nos./ 100 Nos. 


product. 

97 Sensors Net to net. 

98 Linear Transducer/ VDO 

Pressure Transducer 

Net to net. 

99 Thrust Ball Bearing Spherical 

Roller Bearings, Bush Bearing, 

Wheel Flange Rollers etc. 

Net to net. 

100 Various Switches such as Rotary Net to net. 

101 Drive such as Converters Net to net. 

102 Non Alloy Round Stock/ Bar 1.05 kg/ kg content in 


103 Steel Pipe 1.02 kg/ kg content in 


104 Hydraulic Cylinder Net to net. 

105 Band Heters Net to net. 

106 Various Types of Seal Kits Net to net. 

107 PVC Tubing 1.02 kg/ kg content in 


108 Water Filter-cum-Regulator Assy Net to net. 

109 Cam Follower/ Roller Net to net. 

110 Thread Guide Net to net. 

111 S.S. Filter Belts Net to net. 

112 Coil Net to net. 

113 Encoder/ Encoder Cables Net to net. 

114 Flow Meter Net to net. 

115 Servo Valve Assembly/ Actuator Net to net. 

116 Various Machined Mechanical 

parts 

Net to net. 

117 Control Panels Net to net. 

118 Extruder Screw Net to net. 

119 Extruder Barrel Net to net. 

120 Air Compressor Net to net. 

121 Filter Elements/ Suction Filters Net to net. 

122 Pressure Gauge/ Indicator/ Oil 

Gauge 

Net to net. 

123 'O' Rings Net to net. 

124 Thermo Meters/ Bi-Metal 

Thermo Meter 

Net to net. 

125 Terminal Blocks Net to net. 

126 Hose Union Net to net. 

127 Universal Elbow/ Joint Net to net. 

128 Accumulator Net to net. 

129 Scrapper Net to net.

130 Programmer Net to net. 

131 High/ Low Pressure Elements Net to net. 

132 MMC Units Net to net. 

133 Motor Protection Controller Net to net. 

134 Programmable Logic Control Net to net. 

C447 Plates Injection cylinder 1.000 kg 1 Non-Alloy Steel rounds/HR 

Sheet/Plate 

1.10 kg/Kg content in 


C448 Ring Frame drafting 1 No 1 Bright Steel Bar EN 9 435 Kg 

system 

2 Free Cutting Steel 152 Kg 

C449 Speed Frame Drafting 

System 

3 Nose Bar 54 Kg 

4 Aluminium Rounds 20 Kg 

5 Dial Gauges 2 Nos 

6 Vernier Caliper 1 Nos 

7 Height Gauges 2 Nos 

8 CRCA Strip 557 Kg 

9 MS Flat 41 Kg 

10 SAE 52100 Chromium ball 

bearing steel Bar/Tube 

154 Kg 

11 Polypropylene Granules 50 Kg 

12 Steel Ball 24000 Nos 

13 Special Adhesive 10 Kg 

14 Springs 420 Nos 

15 Allen Cap. Screws 915 Nos 

16 Rubber Aprons 840 Nos 

17 Rubber Cots 840 Nos 

18 Bearings 14 Nos 

19 Diamond Crusher 1 No 

1 No 1 Bright Steel Bar EN 9 780 Kg 

2 Free Cutting Steel Bar 50 Kg 

3 Nose Bar 54 Kg 

4 Aluminium Rounds 28 Kg 

5 CRCA Strip 431 Kg 

6 MS Flat 42 Kg 

7 SAE 51200 Chromium ball 

bearing steel Bar/Tube 

130 Kg 

8 Special Adhesive 20 Kg 

9 Steel Balls 20,000 Nos 

10 Polypropylene Granules 40 Kgs 

11 Springs 204 Nos 

12 Allen Cap. Screws 129 Nos 

13 Rubber Aprons 204 Nos 

14 Rubber Cots 408 Nos 

15 Dial Gauges 2 Nos 

16 Height Gauge 2 Nos 

C84

C450 Stainless Steel Pressure 

Vessels made of AISI 

316/L304 (Non-Magnetic) 

17 Vernier Caliper 1 No 

18 Diamond Crusher 1 No 

1 kg 1 CRSS Sheets/ Strips/ Plates/ 

Coils (Non-Magnetic) AISI 

316/L/ 304 Grade) (relevant 

grade) 

4 Components : 

C85 

1.10 kg 

C451 Tail Stocks made of Steel 1.000 kg 1 Non-Alloy Steel rounds/HR 

Sheet/Plate 



C452 Textile Machinery Spare 

parts perforated Nickel 

Screen 

1 Kg 1 Nickel pellets/Square/Strips 1.08 Kgs 

C453 Textile Spindle upper 1 No 1 EN 1 A leaded free cutting steel 1.2096 Kg 

part 

2 Chromium Ball Bearing Steel 

SAE 52100 specter 

0.1956 Kg 

3 Aluminium Rounds 0.05625 Kg 

a) D Button and Spring 3 Sets 

b) Yarn Cutting Knife 1 No 

C454 Textile spindle with insert 1 No 1 EN1A leaded free cutting Steel 1.4875 Kg 

2 SAE 52100 Ball Bearing Steel 0.1969 Kg 

C455 Thrust housing made of 

Steel. 

C456 390 KV Surge 

Arresters/Lightining 

Arresters 

C457 75 Inoculant (Si - 70- 

76%) Ca - 0.6-1.0%, Al - 

0.6-1.0%, Fe - 22-27% 

C458 Alloy Steel (Other than 

Stainless Steel) Wires 

(from melting scrap) 

3 Aluminium Rounds 0.1392 Kg 

4 Buttons/Springs 3 Sets 

5 Complete Insert 1 No 

6 Desmopan granules 1.5 gms 

7 Brakes 1 No 

8 Polypropylene Granules 0.100 Kg 

9 Poly Carbonate 0.065 Kg 

1.0 kg 1 Non-Alloy Steel rounds/HR 

Sheet/Plate 

100 Nos. 1 Zinc Oxide Disc 3" Dia, GE 

Type 9L26 ZNW 107 



103 Nos. 

1000 kgs 1 Ferro Silicon 1000 kgs 

2 Ferro Silico Calcium 100 kgs 

1000 kgs 1 Non alloy steel melting scrap 1200 kgs 

2 Graphite Electrode 6 kgs 

3 Cored wire/ lumps/ powder of 

calcium silicide (CaSi) 

1 kgs 

4 Rolls/ Tungsten carbide rings for 1.77 kgs 

rolling mills 

5 Copper Mould 0.0007 Nos 

6 Silico Manganese 

OR 

Qty in Kgs as in 

Formula 1) of Note 

6 a) Ferro Silicon Qty in Kgs as in 

Formula (2) of Note 

4 

b) Ferro Manganese Qty in Kgs as in 

Formula 3) of Note 4

7 Refractory comprising of : 15 kg 

a) Zirconia/ magnesia nozzles 

b) Aluminium-graphite nozzles/ 

monoblock stoppers/ stopper 

heads/ stopper rods/ shrouds 

c) Porous plugs/ seat blocks/ 

sleeves/ slide gate plates 

d) Direct bonded basic bricks 

e) EBT Tubes/ mass/ bricks 

f) Monolithic/ gunning/ ramming 

mass/ castables 

g) Dolomite/ magnesia carbon 

bricks 

8 Other ferro alloy(s) (Including 

charge/ ferro nickel/ charge 

chrome etc ) provided the 

alloying element(s) is/are 

actually present in the export 

product 

9 Casting powder 2 kgs 

10 Saw/ shear blade 0.01 kg 

11 Copper scrap/ Copper 

Cathode/Copper Wire 

Bar/Copper Rods (if copper is 

actually present in the steel) 

0.04 kg 

12 Furnace oil (For captive power 

plant only) 

70 kgs 

13 Furnace oil for oil fired reheating 50 kgs 

furnace in the rolling mill 

14 Furnace oil for ladle heating 6 kgs 

15 Lubricant (for captive power 

plant) 

0.65 kgs 

16 Low silica lime stone 100 kgs 

17 Cored wire/ scrap/ ingots of 

aluminium 

1 kg 

18 Cored wire of lead/ lead shots (in 2.5 kgs 

case of export of lead bearing 

free cutting steel only) 

19 Raw petroleum coke 5 kgs 

20 Ceramic coated lancing pipe 1 No 

21 Temperature tips 0.50 No. 

22 Sampler tips 0.25 No. 

23 a) Dry drawing lubricant/ coating 8 kgs 

b) Wire drawing soap 7 kgs 

c) Tungsten carbide dies 5 No 

d) Wet drawing lubricant/ coating 4 kgs 

e) Plastic bobbins/ spools 300 Nos 

C86 

Qty of each ferro 

alloy in kg as in 

formula (iv) of note 4 

Note: 1. The above norms is applicable only if the export product(s) is manufactured through electric arc 

furnace route/ induction furnace route using steel scrap as basic raw material. 

2. Value of consumable item at Sl.No 2, 4, 5,7 (a to g) 9,19,20,21,22,23 (a to e) shall not excced 25% of the 

total CIF value of the licence. 

3. In case the product(s) is manufactured through induction furnace route, the item at Sl.No.(2) will not be

allowed. 

4. (i) 5.50 X(mean average of % manganese content+mean average of % Silicon content in Steel) 

(ii) 1100 X (mean average of % Silicon content in Steel)divided by (mean average of % siliconcontent in 

ferro silicon). (iii) 1100 X (mean average of % Manganese content in steel) divided by(mean average of % 

Manganese content in ferro manganese) 

(iv) 1100 X (Mean average of % alloy content in steel)devided by (mean average of% alloy content in 

respective ferro alloy. 

5. Import of Items at Sl.No.23(d to e) would be allowed against export of wire below 1mm only 

C459 Alloy Steel (other than 

Stainless Steel, Exhaust 

Valve Steel and High 

Speed Steel) Semi 

finished Products 

(Blooms, Billets and 

Slabs) and Ingots 

1 Tonne 1 Major Inputs: 

a) Non-alloy Steel Melting Scrap, 

Pig Iron, Sponge Iron including 

Hot Briquetted Iron (HBI) 

2 Additives (Ferro 

Alloys/Metals/Compounds): 

a) i)Ferro Silicon (Si : 75%) 1.70 

a) ii) Ferro Manganese (Mn : 75%) 

OR 

1.43 

a) i) Ferro Silicon (Si : 75%) 1.46 

a) ii) Silico-Manganese (Mn : 65% 

& Si : 15%) 

1.65 

b) Charge Chrome, High Carbon 

Ferro Chrome (Cr : 60%) 

OR 

1.79 

Low Carbon Ferro Chrome (Cr : 

70%) 

1.53 

c) Unwrought Nickel (Ni : 99%) 

OR 

1.04 

Ferro Nickel, Nickel Oxide 

Sinter (Ni : 40%) 

2.58 

d) Lead (Pb : 99%) Scrap/ Shots/ 

Wires/ Powder in cored wire 

1.60 

e) Ferro Molybdenum (Mo : 65%) 

OR 

1.58 

Molybdenum Oxide (Mo : 60%) 1.89 

f) Ferro Titanium (Ti : 70%) 2.43 

g) Ferro Tungsten (W : 75%) 1.38 

h) Any other Nobel/Special Ferroalloys 

(Ferro Vanadium, Ferro 

Boron, Ferro Phosphorous, etc.) 

1.38 

I) Any other metal (not present in 

aforesaid ferro-alloys/metals) in 

unwrought or wrought form or in 

powder form in cored wires 

1.04 

j) Sulphur stick/Sulphur powder in 

cored wire 

2.00 

3 Consumables / Misc. Inputs: In Kgs 

a) Graphite Electrodes (For EAF 

Furnace Only) 

b) Relevant Cl, Steel Rolls for Hot 

Rolling Mill/Continuous Casting 

Machine 

c) Relevant Copper lined Moulds, 

Copper Moulds for Continuous 

Casting (if export product is 

C87 

In kg. as per Note 2. 

In kg. per kg content 

of alloying element in 


4 

0.06 

0.01

d) 

produced through Continuous 

Casting route with/ without 

further rolling) 

Casting Powder 1 

e) Aluminium wires, Notched bars, 

scraps, shots, ingots, Dross, 

Powder in Cored Wire and Ferro 

Aluminium 

1 

f) CaSi Lumps, CaFe Lumps, 

Powder of CaFeAl/ CaFe /CaSi 

in Cored wire 

0.1 

g) Metallurgical Coke (Nut, Pearl, 

Fines) 

20 

h) Raw / Calcined Petroleum coke 4 

I) Rolling Mill Oil, Hydraulic Oil, 

Lubricating Oil 

0.5 

j) Celox Inserts, Temperature Tips, 

Oxygen Probes, Sampler Probes, 

Sampler Tips 

0.1 

k) Relevant Shear Blades, Saw 

Blades 

0.01 

l) Oxygen Lance pipes, Submerged 

tuyers, Atmospheric 

injector 

0.1 

m) Calcium Carbide 0.5 

n) Low silica lime stone/ Calcined 

lime 

o) Refractories : 

i ) Relevant shaped Refractories 

(Fired/Un-fired Bricks/Shapes) 

ii) Relevant Monolithic 

Refractories (including 

Castables, ramming mass, 

gunning mixes) 

iii) Relevant Special Refractories 

i.e. C.C refractory (Shrouds, 

Mono Block Stopper, SE 

Nozzles), Slide Gate refractory, 

Porous Plug, Zircon/ Zirconia 

Nozzles & Tundish Nozzles 

4 Energy Sources: 

a) Relevant fuel for electric power 

for Steel making and Auxiliaries 

(for units with captive power 

plant/source only) 

1000500 K. Cal 

b) Relevant Lubricant for captive 

power plant 

1 kg 

c) Relevant fuel for fuel fired reheating 

furnace (if & only if 

export product is supplied in 

rolled condition) 

261000 K. Cal 

d) Relevant fuel for electric power 

for hot rolling mill & auxiliaries 

(if & only if export product is 

supplied in rolled condition) 

217500 K. Cal 

e) Relevant fuel for ladle / tundish / 35000 K. Cal 

ferro-alloy heating 

Note: 1. This norm is applicable for export product manufactured adopting Electric Arc Furnace/ Electric 

C88 

76 

4 

10 

1

Induction Furnace using Non-alloy Steel Melting Scrap as the basic input with Sponge Iron/HBI and Pig 

iron as partial substitutes. 

Note: 2. The total quantity of items allowed against Sl. No. 1 (a) shall be limited to 1115 Kg. minus the 

quantity of ferro alloys/ metals/ compounds allowed against Sl. No. 2 further, individual quantity of Pig 

Iron and Sponge Iron/ HBI allowed against Sl. No. 1 (a) shall not exceed 20% and 65% respectively of the 

total quantity of items to be permitted therein in line with Note 1 above. 

Note: 3. Quantities of Ferro Alloys/Metals/Compounds have been worked out based on a specified 

percentage of alloying element in the Ferro Alloys/Metals/Compounds as indicated therein within the 

parentheses against each alloy. If the percentage of alloying element in the ferro-alloy is higher/ lower, the 

revised (i.e lower / higher) quantity may be worked out on pro-rata basis as under: 

Quantity permitted in norm x % of element in ferroalloy/metal/compound as per the norm 

Actual % of element in the imported ferroalloy/metal/compound 

Note: 4. For a given alloying element in steel, wherever two alternate ferroalloy / metals / compound of the 

same alloying element have been permitted and it is proposed to import a combination of both, individual 

quantities of each ferro-alloy may be worked out based on the specified (part) quantities of the alloying 

element in two forms (but within the overall quantity of alloying element in the steel), using the content 

based formula given therein. 

Note: 5. Alloying element(s) in steel is/are prescribed by specifying the minimum value or a range or the 

maximum value. For calculating the quantities of ferro alloys/ metals/ compounds as per the content 

based formula given in the SION, the prescribed minimum or the mid value of the range or 0.8 times the 

maximum value of the respective alloying element(s) in the export product shall be taken into 

consideration. 

Note: 6. In case import of alloy steel melting scrap of known chemical composition is resorted to, quantity 

of respective ferroalloy/metal/compound to be allowed will reduce to account for the recoverable alloying 

element (s) (Nickel, Copper, Chromium, Molybdenum and Manganese) in the scrap. The reduced 

quantity of each ferroalloy/metal shall be obtained by deducting the equivalent quantity of 

ferroalloy/metal to be obtained using the following formula from the total quantity as per SION read with 

Note 3: 

Alloy Steel Scrap Quantity (kg) x % of relevant element in scrap 

1.115 x % of relevant element in ferroalloy/ Metal / compound 

Ferro alloys/metals/compounds of elements other than that of Nickel, Copper, Chromium & Manganese 

shall be allowed as per the content base formula given therein without any reduction. 

Note: 7. The specified quantities of energy sources/ fuel for electric power generation (in K. Cal ) against 

import item 4 (a) & 4 (c) which correspond to electric power consumption of 500 and 100 KWH per tonne 

of export product have been allowed assuming that Captive Power Plant (CPP)/Source of matching 

capacity exist. In case CPP in a given unit is of lower capacity, quantity of fuel to be allowed for import 

will be reduced on pro rata basis. 

Note: 8. Quantity of energy sources / fuels (in K. Cal) correspond to a fuel having unit heat value of 8700 

K. Cal/Kg. Import of any other fuel of higher/lower unit heat value (as long as it is relevant to the facilities 

installed in the unit) may be permitted, quantity of which (in Kgs./ Cubic Meters/ K. Liters) may be 

worked out by dividing the K. Cal figures given in the SION by the actual unit heat value of the imported 

fuel. 

Note: 9. Import of items at Sl. No. 3(b), (c), (d), (i), CC Refractories under 3 (n) (iii) and 4(c) shall not be 

permitted against export of steel ingots. 

C89

C460 Alloy Steel (other than 

Stainless Steel) Bars and 

Rods (including Rounds, 

Flats, Wire Rods etc), 

Angles, Shapes & 

Sections (including 

Special Profiles), 

1 Tonne 1 Billets/Blooms of relevant grade 

of alloy steel 

OR 

Ingots of relevant grade of alloy 

steel 

2 CI / Steel Rolls, TC Rolls, Rings 

for Rolling Mill 

3 Relevant fuel for fuel fired Reheating 

furnace. 

C90 

1030 kg 

1050 kg 

0.60 kg. for 

Billets/Blooms input 

OR 1.20 kg. for ingot 

inputs 

261000 K. Cal. 

4 Relevant Fuel for electric power 

generation for Hot Rolling & 

auxiliaries (for units with captive 

power plants/source only) 

217500 K.Cal. 

5 Relevant Shear Blades, Saw 

Blades 

0.01 kg 

Note 1. The quantity of energy sources/ fuel for electric power generation (i.e. 217500 K. Cal) which is 

based on a power consumption norm of approx. 100 KWH per tonne of export product has been allowed 

assuming that Captive Power Plant (CPP) / Source of at least this capacity exist. In case CPP/Source in a 

given unit is of lower capacity, quantity of fuel to be allowed for import will be reduced on pro rata basis 

Note 2: Quantity of fuel for re-heating furnace (in K. Cal.) corresponds to a fuel having unit heat value 

8700 K.Cal/kg. for which, 30 kg of the said fuel may be allowed. Import of any other fuel of higher / lower 

unit heat value (as long as it is relevant to the re-heating furnace installed in the unit) may be permitted, 

quantity of which (in Kgs. / Cubic Meters / K. Liters) may be worked out by dividing the K. Cal. figures in 

the SION by the actual unit heat value of the imported fuel. 

C461 Deleted 

C462 Alumina Carbon 

Bricks/Shapes and/or 

Ramming Mass, 

Castables and Mortars 

1000 kgs. 1 Major Raw Materials comprising 

of: 

a) Andalusite (Alumina 56% and 

above) and/or 

i)Fused and/or Sintered 

Alumina/Mulite (Alumina 56% 

and above) 

b) Graphite(Fixed Carbon 92% and 

above) and/or 

i)Silicon Carbide 

c) Zircon and /or Zirconia Bubbles 

Grains (Zirconis Oxide 80% and 

above) and/or 

i) Ceramic Fibre Paper 


750 kgs 

200 kgs 

250 kgs 

a) Fume/Colloidal Silica and/or 40 kgs 

b) Metallic Alloys of Aluminium, 

Silicon, Magnesium and/or 

c) Phenolic Resin and/or 

i) Ceramic Fibre Paper 

d) Alumina Cemant/Binder 


a) Mould and Mould Liners Upto 10% of the CIF 

value. 

b) Cutting Tools 

Note 1. In the case of export of Ramming Mass, Castables & Mortars, item at (a), (b) in item No. 3 should 

not be allowed.

C463 Alumina Carbon 

Continuous Casting 

Refractories and/or 

Mortars 

1000 kgs 1 Major Raw Materials comprising 

of: 

a) Fused and/or sintered and/or 

Calcined and/or Tabular Alumina 

(Alumina 82% and above) and/or 

i) Calcined Bauxite (Alumina 

82% and above) and/or 

ii)Beta Alumi(Alumina 94% and 

above) and/or iii) Graphite 

(Fixed Carbon 85% Minimum) 

and/or 

800 Kgs 

b) Fused Zirconia (Zirconium 

Oxide 85% and above) and/or 

i) Silicon Carbide and/or Fused 

Silica and/or ii) Coating Material 

and/or iii) Alumina Silicate Fritt 

(Silicon Oxide 50% and above, 

Boron Oxide20% and above) 

and/or iv) Boron Carbide (Boron 

72% and above) 

400 kgs 


a) Metallic Alloys of Aluminium, 80 Kgs 

Silicon and magnesium and /or 

i) Phenolic Resin 


a) Moulds and Mould Liners 


Note 1. In the case of export of Mortars, the misc. at item No. 3(a) & 3(b) will not be allowed. 

C464 Alumina Carbon/ Slide 

Gate Plate Refractory 

and Attachments 

1000 Kgs 1 Major Raw Material comprising 

of: 

a) Fused and/or Sintered Alumina 

and/or Tabular (Alumina 80% 

and above) and/or 

i)Calcined Bauxite (Alumina 


ii)Andalusite (Alumina 56% and 

above) 

b) Ceramic Fibre Paper and /or 

i) Carbon Black and/or Graphite 

and/or 

ii) Silica Carbide and/or 

iii) Micro Fine Silica 


a) Micro/Fume/Colloidal Silica 

and/or 

b) Metallic Alloys of Aluminium, 

Silicon and Magnesium and/or 

c) Phenolic Resin 

3 Miscellaneous items: 

C91 

Upto 17 % of CIF 

value. 

800 kgs 

400 kgs 

30 kgs 

a) Mould and Mould Liners Upto 16% of CIF 

value. 


Note 1. In the case of export of Ramming Mass, Castables & Mortars, item at (a),(b) in item No. 3 should 

not be allowed. 

C465 Alumina Fused Cast 

Refractories 


of: 

a) Calcined Alumina (Alumina 80% 1110 kgs 

and above) and/or 

b) Zircon and/or Zirconia Bubbles/ OR 935Kg.s

C466 Chrome Magnesite 

Bricks and Shapes and/or 

Ramming Mass, 

Castables and Mortars. 

Grains(Zirconium Oxide 80% 

and above) OR Baddelyet 

(containing Zirconium Oxide 

95% and above). 


a) Graphite Electrode and/or 80 kgs 

b) Graphite Moulds and/or 

c) Cutting Tools 

1000 Kgs 1 Major Raw Materials comprising 

of: 

a) Dead Burnt 

Magnesite(Magnesium Oxide 

92% & above) and /or 

i)Sea Water Magnesia 

(Magnesium Oxide 94% and 

above)and/or 

1 b) Chromite(Chromium Oxide 40% 

minimum)and/or 

i)Mag Chrome Co-clinker 


above) 


a) Micro Fine Chrome Bond 

and/or 

b)Sulphates 


a)Mould and Mould Liners 

b)Cutting Tools 

C92 

500 Kgs 

520 kgs 

50 Kgs 

Upto 10% of CIF 

value. 

Note 1. In the case of export of Ramming Mass, Castables & Mortars, item at (a),(b) in item No. 3 should 


C467 Coal based Direct 

Reduced Iron (Briquetted 

Iron/ Sponge Iron) 

1000 kg 1 Caliberated Iron ore having iron 

content 67% or above 

1500 kg 

2 Non coking coal having ash 

content 12% or less 

800 kg 

3 Dolomite 45 kg 

4 High Alumina refractory bricks 0.5 kg 

5 Castable refractory 0.12 kg 

6 Briquetting moulds (those having 0.000066 Nos 

briquetting facility) 

7 Light diesel oil 0.48 Lts 

Note:- The Value of item at Sl.Nos 4,5 & 6 shall not exceed 10% of the CIF Value of the licence. 

C468 Cobalt Base Hard Facing 1 kg 1 Indellite Grade 1 

Alloy Wire Rods 

a) Cobalt 1.07 kg/kg content in 


b) Chromium 1.07 kg/kg content in 


c) Nozzles Net to Net 

2 Indellite Grade 12 






3 Indellite Grade 6

C469 Cold Rolled Galvanised 

Colour Coated Non Alloy 

Steel Sheets/ hoops & 

Strips/ Wide Coils having 

Zinc coating of 180 gm 

per Sq.m @40 Sq.M per 

litre Primer, 20 Sq.M per 

litre as Top Coat and 25 

Sq.Mtr. Per litr. As 

Backer given in 

EngineeringTable 1. 






1000 kgs 1 Non Alloy Hot Rolled Steel 

Sheets/ Strips/ Wide Coils 

C93 

1130 kgs 

2 Rolling Mill Rolls 1.25 kgs 

3 Rolling Oil 0.35 kg 

4 Pickling Oil 0.45 kg 

5 Steel Strapping 2.0 kgs 

6 VCI Rusto - Paper 5.0 Sq.mtr. 

7 Zinc * 

8 Guard Film * 

9 Paints (Ltrs.) * 

(a) Primer 

(b) Tap Coat 

(c) Backer 

* Note : While the quantity of item nos 1 to 6 will remain the same for all thickness of the product, the 

quantity of items 7 to 9 will be as per the Engineering Table 1 given at end of this product group. 

C470 Cold Rolled Full Hard/ 

Cold Rolled Close 

1000 kg 1 Non-Alloy/ Alloy Hot rolled 

steel strips/ wide coils 

1085 kg 

Annealed (without skin 

2 Rolling Mill Rolls 1.25 kg 

passed/ temper passed) 

3 Rolling oil 0.35 kg 

Non-Alloy/Alloy Steel 

(excluding Stainless Steel) 

4 Pickling oil 0.45 kg 

Sheets/ Hoops and Strips/ 

5 Steel strapping 2.0 kg 

Wide Coils 6 VCI Rusto Paper 5.0 sq. mt 

C471 Cold Rolled Close 

annealed (CRCA) Skin 

Passed/ Temper passed 

(including Half Hard, 

Quarter Hard) Non- 

Alloy/ Alloy Steel 

(excluding Stainless Steel) 

sheets/ Hoop and Strips/ 

Wide coils 

C472 Cold Rolled 

Galvanized/Galvannealed 

(Plain/Corrugated) Non 

Alloy Steel 

Sheets/Strips/Wide Coils. 

1000 kgs 1 Hot Rolled Non-Alloy/ Alloy 

steel strips/ wide coils 

1118 kgs 


3 Rolling oil 0.35 kg 

4 Pickling oil 0.45 kg 

5 Steel strapping 2.0 kgs 

6 VCI/Rusto Paper 5.0 sq. mtr 

1000 kgs 1 Cold Rolled Non Alloy Steel 


2 Zinc (in kgs.) * 

1050 kgs/1000Kgs. 

Content in the export 

product. 

* Note : While the quantity of item no 1 will remain the same for all thickness of the products, the quantity 

of item 2 will be as per the Engineering Table 3 given at the end of this product group. 

C473 Cold Rolled 

Galvanized/Galvannealed 

(Plain/Corrugated) Non 

Alloy Steel 

1000 kgs 1 Hot Rolled Non Alloy Steel 



Sheets/Strips/Wide Coils. 3 Rolling Oil 0.35 kg 

1118 kgs/1000Kgs 


product.

4 Pickling Oil 0.45 kg 

5 Steel Strapping 2.00 kgs 

6 VCI Rusto Paper 5.0 Sq.mtr. 

7 Zinc (in kgs.) * 

* Note : While the quantity of item nos 1 to 6 will remain the same for all thickness of the product, the 

quantity of item 7 will be as per the Engineering Table 3 given at the end of this product group.The 

existing Engg. Table 3 shall be substituted by the Engg. Table annexed with this public notice. 

C474 Electrolytic Tin Plate 1 kg 1 Mild Steel Cold Rolled Wide 

Coil (Black Plate in Coil) 

Note : This norm is made effective retrospectively from 06.11.2002. 

C475 Ferro Chrome containing 

by weight minimum 60% 

Chromium and 

maximum 1.5% Carbon 

produced by Silico 

Thermic Reduction 

Process 

C476 Ferro Chrome/ Charge 

Chrome containing by 

weight more than 4% 

Carbon 

1000 kg 1 Chrome Ore (containing 40% 

Minimum Chromite) 

C94 

1.006 kgs 

1320 kgs 

2 LAM Coke/Raw Petroleum 

Coke/Australian Char/Anthracite 

Coal 

1063.94 kgs 

3 Carbon Electrode/Paste 84 kgs 

4 Limestone 4000 kgs 

5 Furnance Oil/LSHS/HFO 3000 kgs 

6 Lubricating/Gear Oil 16.76 kgs 

1000 kg. 1 Chrome Ore Lumps/ Briquettes/ 

Pellets 

1200 kg 

2 LAM coke/ Raw petroleum coke/ 750 kg 

Australian char/Anthiacite 

Coal(with fixed Carbon 88% 

Minimum & Ash content 6% 

maximum)/ Non Coking Coal 

3 Carbon electrode/ paste 35 kg 

4 Furnace oil/ LSHS/HFO * 1200 kg 

5 Lubricating/ gear oil * 7.0 kg 

* For units having captive power plants (D.G. Set). 

C477 Ferro Manganese 1000 kg. 1 High grade Manganese ore 1200 kg 

(Fe Mn) 

2 Lam Coke/ Raw Petroleum 

Coke/ Australian Char/ 

Anthracite Coal (with fixed 

Carbon 88% minimum and Ash 

content 6% maximum)/ Non 

Coking Coal 

750 kg 

3 Carbon Electrode/ paste 20 kg 


C478 Ferro Molybdenum (60- 

65% Molybdenum 

C479 Ferro Silicon 

(Fe Si) 

4 Furnace Oil/ LSHS/ HFO * 850 kg 

5 Lubricating/ gear oil * 6.0 kg 

1000 kg 1 Molybdic Oxide/Roasted 

Molybdenum Ore (Molybdenum 

55-60%) 

1104 Kgs 

2 Ferro Silicon (Silicon 75-80%) 421 kgs 

3 Aluminium Ingot/Powder 43.21 kgs 

1000 kg. 1 LAM Coke/ Raw Petroleum 

Coke/ Australian Char/ 

Anthracite Coal (with fixed 

Carbon 88% minimum and Ash 

content 6% maximum)/ Non 

Coking Coal 

1400 kg


C480 Ferro Vanadium (50- 

55% Vanadium) 

C481 Ferro Vanadium (75- 

80% Vanadium) 

C482 Cold Rolled Galvanised 

Non Alloy Steel 

Sheets/hoops & 

Strips/Wide Coils. 

2 Carbon Electrode/ paste 65 kg 

3 Furnace oil/ LSHS/ HFO * 2400 kg 

4 Lubricating/ gear oil * 15 kg 

1000 kg 1 Vanadium Pent- oxide (50-60% 

Vanadium) 

1000 kg 1 Vanadium Pent- oxide (50-60% 

Vanadium) 

C95 

1022 Kgs 

1610 Kgs 

1000 kgs 1 i)Copper Cathode/Copper Wire 

Bar/Copper Rods (if copper is 

present in the export product) 

0.04 kg 

ii)Copper Plates/Micro alloyed 

copper plate (for use in copper 

lined casting moulds) 

0.1 kg 

iii)Zinc 40 kgs 

iv)Furnace Oil/LSHS/Naptha 13 kgs 

2 MAJOR INPUTS: 

a)Non-Alloy Steel Melting Scrap 330 kgs 

b)Pig Iron 31.774 kgs 

c)Low silica lime Stone 620 kgs 

d)Coking Coal 

OR 

1000 kgs 

Metallurgical Coke 700 kgs 

3 i)ADDITIVES: 

a) Cored wires/scraps/ shots/ ingots 1.466 kgs 

of aluminium 

b) Ferro Niobium 0.035 kg 

c) Ferro Vanadium 0.004 kg 

d) Ferro Silicon/Ferro Manganese/ 

Silico Manganese/ Other ferro 

Alloy(s) (including Nickel Oxide 

sinter/Ferro Nickel/charge 

chrome provided the alloying 

element(s) is/are actually present 


17.000 kgs 

e) Calcium Silicide (CaSi) 1.5 kg 

f)Raw Petroleum Coke 2.3 kgs 

3 ii)Miscellaneous Items: 

i)Silicon Carbide Grains 2.0 kgs 

ii)Rolls/Tungsten Carbide rings 1.77 kgs 


iii)Celox Inserts/Oxygen 0.004 kg 

measuring probes 

iv)Thermodynamic elements 0.325 kg 

v)Magnesia Reagent/ 

Desulphurisation Compound 

0.006 kg 

vi)Silica Gel/Mobile Sorbead 0.010 kg 

vii)Freon Gas-142/114(Net of 

Cylinders) 

0.010 kg 

viii)Stainless steel Hoses 0.007 kg

C96 

ix)Shear Blades/Saw Blade 0.010 kg 

x)Oxygen Lance Pipe 0.750 kg 

xi)Rolling Mill Oil 0.500 kg 

xii)Casting Powder 2.083 kgs 

xiii)Temperature Tips 0.022 kg 

xiv)Canned 

0.200 kg 

Elements/Pearmeable elements 

for combined blowing 

xv)Graphite electrodes (only 1.000 kg 

those having VADR facilities) 

xvi)Welding flux 8.00 kgs 

xvii)Weld wire 4.00 kgs 

xviii)Surface protection film 13.30 kgs 

xix) Refractory Bricks/ Shapes 9 kgs 

and/or Dead Burnt/ Sea Water/ 

Fused Magnesia for captive use 

for manufacture of Bricks/ 

Shapes 

xx) Monolithic Refractory viz. 5 kgs 

Castables, Gunning Mass & 

Ramming Mass and/or Dead 

Burnt/ Sea Water/ Fused 

Magnesia for captive use for 

manufacture of Monolithic 

Refractory 

xxi) Specialty Refractories 1 kg 

namely Continuous Cast 

Refractories (such as Shrouds, 

Mono Block Stoppers and Sub- 

Entry Nozzles), Slide Gate 

Refractories, Porous Plug, 

Zircon/ Zirconia Nozzles and 

Tundish Nozzles 

Note 1. The above norm is applicable only if the export product(s) is manufactured through Blast 

Furnace-LD Converter/ Open Hearth/ Energy Optimising Furnace routes in the integrated steel plants. 

2. Items at Sl.Nos. 3(i) (b & c) would bepermitted only if the Alloying Elements, viz. Niobium and 

Vanadium is present in the export product. 

C483 Gas based direct reduced 

iron (Hot Briquetted 

Iron/ Sponge Iron) 

1000 kgs. 1 Calibrated Iron Ore and Iron 

Pellets 

1500Kgs. 

2 Iron Ore Pellets 300 kgs 

3 Liquified Petroleum Gas 

OR 

86 kgs 

Furnace Oil 

111 kgs 

4 Reformer Catalyst (Alumina 

Magnesia based Nickel Catalyst) 

0.070 Ltr 

5 Briquetting Moulds (only for 

those having Briquetting 

Facilities) 

0.0004 No. 

6 Refractories(80% Alumina 

Bricks and Castables) 

0.4 kg 

7 Dead Burnt Magnesite 


above) 

5 kgs 

8 Zinc Oxide 0.070 Ltr. 

9 Potassium Carborate 0.17 kg.

10 Glycine 

11 Vanadium Pentoxide 

12 Diathanolamine 

13 Resin 0.014 Ltr. 

14 Tri-sodium Phosphate 0.008 kg 

15 Water Treatment Chemicals 0.05 kg. 

2 a) Natural Gas/LNG 290SCM/213Kg 

respectively. 

b) Propane OR Naptha upto 20% within the 

total quantity of 

natural gas/LNG OR 

upto 5% within the 

total quantity of 

natural gas/LNG 

1) Natural Gas/LNG 180SCM/132 Kg 

respectively 

2) LPG or Furnace oil/Naptha 91Kg. Or 108Kgs. 

3 a) 

MISC. ITEMS CONSITING 

OF:- 

Reformer Catalyst (Alumina 

Magnesia based Nickel Catalyst), 

b) Briquetting Moulds & High 

temerature Grease (only for those 

having Briquetting facilities) 

c) Refractories (80% Alumina 

Bricks nd Castables), 

d) Dead Burnt Magnesite 


above), Zinc Oxide, Potassium 

Carbonate, Glycine, Vanadium 

Opentaoxide, Diathanolamine, 

resin, Tri-sodium Phosphate, 

Water Treatment Chemicals, 

e) Nickel-chromium based reformer 

tubes 

f) Nickel -Chromium based Heat 

recovery tube Bundles. 

Note : 1 Quantum of Iron Ore Pelletws under S.No. 1 shall be limited to 70% of the total permitted 

quantity. 

General note No. 7 shall not apply in respect of Furnace Oil in S.No. 2(ii) since it is a process 

necessity.Import of LNG, Propane, Naphtha, LPG and Furnace Oil at S.No. 2 shall be allowed to only such 

Gas based directed reduced iron producers who has installed facilities to use these fuels.Item at S.No. 3(d) 

shall be allowed only to Gas based DRI producers following HYL-III technology. 

2. Import item No 3 (a) to 3 (f) in total (Misc. item) are allowed up to 4% of the FOB value of export. 

C484 Deleted 

C485 Graphite electrode/ 

Carbon electrode/ 

Anodes/ Nipples/ 

Graphite Fine and Mix 

Graphite Products 

C486 High Alumina (Bubble 

Alumina Based) Bricks & 

Shapes and/or Castable 

and Mortars 

1 kg 1 Electrode grade Calcined 

Petroleum Coke/ Pitch Coke 

1.300 kg 

2 Special Impregnating pitch 0.400 kg 

3 Coal Tar Pitch 0.383 kg 

4 Furnace Oil 0.489 Ltr 


of: 

a) Bubble and/or Fused Alumina 

(Alumina 90% and above) and/or 

C97 

1050 kgs

C98 

i)Reactive Alumina 


Alumino Silicate Powder and/or 

Metallic Alloys of Aluminium 

Silicon and Magnesium 

OR 

200 kgs 

2 a) Micro/ Fume/ Colloidal Silica 180 kgs 


a) Mould and Mould Liners Upto 11% of the CIF 

value. 




C487 High Alumina (Synthetic 

Base) Bricks/Shapes 

and/or Ramming Mass, 



of: 

a) Fused and/or Sintered 

Alumina/Mulite (Alumina more 

than 73%) and/or 

i) Reactive Alumina (Alumina 

more than 73%) and/or 

b) Graphite(Fixed Carbon 85% 

Minimum) and/or 

i) Pitch Pellet (more than 60% 

Fixed Carbon) 


a) High Alumina Cement/Binder 

and/or 

i) Micro/Fume/Colloidal Silica 

and/or 

ii) Aluminium Silicate Powder 

and/or iii) Metallic Alloys of 

Aluminium, Silicon, Magnesium 

and/or iv)Sodium Hexameta 

Phosphate 


850 kgs 

200 kgs 

180 Kgs 


value. 




C488 High Alumina Blast 

Furnace Stove Bricks/ 

Shapes and Mortars 


of: 

a) Andalusite and/or 

i)Calcined and/or Fused and/or 

Reactive Alumina 


1400 kgs 

a) Micro/ Fume Colloidal Silica 

and/or 

i)Sodium Hexa Metaphosphate 

and/or 

ii)Metallic Alumina 

160 kgs 

3 Miscellaneous Items: Upto 18% of CIF 

value. 

a) Mould and Mould Liners 

b) Cutting Tools



C489 High Alumina Bricks and 

Shapes and/or Ramming 

Mass, Castables and 

Mortars 


of: 

a) Andalusite (Aluminium Oxide 


i)Calcined Bauxite (Aluminium 

Oxide 50% and above) 


a) High Alumina Cement/Binders 

and/or Ligno Sulphate 

OR 

Micro/ Fume/ Colloidal Silica 


C99 

1020 kgs 

270 kgs 

180 kg 


value. 




C490 High Alumina Refratory 

for Hearth 

1 No. 1 Syntered Alumina Tiles Net to Net 

C491 High Chrome Castings 

for Cement Grinding 

Mills (Composition: 

Cr.30-32%, Moly- 2.5- 

3%, Si 1.5-2.5% and C- 

1 MT 1 High Carbon Ferro Chrome (Cr. 

65%) 

523 kgs 

2 Ferro Molybdenum (MO) (65- 

70%) 

47 kgs 

3 Ferro Silicon (Si) 75% minimum 29 kgs 

1.5-2.5%, Balance - Iron) 4 Non-Alloy Steel Scrap 479 kgs 

C492 High Speed Steel (cobalt 

grade) bars & rods/ 

wires/ special profiles/ 

flat rolled products 

1000 kg 1 Ferro Molybdenum * 

2 Ferro tungsten ** 

3 Ferro Vanadium *** 

4 Cobalt metal **** 

* 3330 X (mean average of % Modybdenum in steel devided by mean average of % Modybdenum in Ferro 

Molybdenum) 

** 3330 X (mean average of % Tungsten in steel divided by mean average of % Tungsten in Ferro 

tungsten) 

*** 3330 X (mean average % Vanadium in steel divided by mean average of % Vanadium in Ferro 

Vanadium) 

**** 33 X (mean average of % cobalt in steel) 

C493 High Speed Steel (Non 1000 kg. 1 Ferro Molybdenum * 

Cobalt grade) bars & 

2 Ferro Tungsten ** 

rods/ wires/ special 

3 Ferro Vanadium *** 

profiles/ flat rolled 

products 

* 3330 x (mean average of % Molybdenum in steel) 

( mean average of % Molybdenum in ferro Molybdenum) 

** 3330 x (mean average of % Tungsten in steel) 

(mean average of % Tungsten in ferro tungsten) 

*** 3330 x (mean average of % Vanadium in steel) 

(mean average of % Vanadium in Ferro Vanadium) 

C494 Hot Metal/Pig Iron 1000 kgs 1 i)Iron ore/Iron Ore concentrates/ 1500 kgs 

Iron ore pellets having 65% or

C495 Hot Rolled Nonalloy/Alloy/Stainless 

Steel 

Sheets/ Strips/Wide Coils 

C100 

more iron 

ii)Metallurgical Coke 

OR 

Metallurgical Coke 

OR 

Coking Coal 

OR 

700 kgs (without 

PCI) 

500 kgs (with PCI) 

1000 kgs (without 

PCI) 

Coking Coal 800 kgs (with PCI) 

iii)*PCI Coal for plant having 

PCI injection system 

200 kgs 

iv)Coke Breeze 20 kgs 

v)Limestone 200 kgs 

vi)Dunite 50 kgs 


i)Silicon Carbide grains 2 kgs 

2 ii)Alumina/Graphite/ Carbon 

Refractories 

1 Tonne 1 Slabs of relevant grade of Nonalloy/ 

Alloy/ Stainless Steel 

OR 

Ingots of relevant grade of Nonalloy/Alloy/ 


2 CI/ Steel Rolls for Hot Rolling 

Mill 

0.33 kg 

1030 kg 

1050 kg 

3 Steel Shots 5.5 kg 

0.60 kg (if input is 

slab) 1.20 kg (if input 

is ingot) 

4 Relevant Shear Blades/ Saw 

Blades 

0.01 kg 

5 Relevant Fuel (for fuel fired reheating 

furnace) 

261000 K. Cal. 

6 Relevant Fuel for electric power 



plant / source only 

217500 K. Cal. 

Note 1. The quantity of fuel for power generation (i.e 217500 K. Cal.) which is based on a power 

consumption norm of approx. 100 KWH per tonne of export product has been allowed assuming that 

captive power plant/ source of at-least matching capacity exist. In case, the capacity of the Captive Power 

Plant/ source in a given unit is lower, quantity of fuel to be allowed for import will be reduced on pro rata 

basis. 

Note 2. The quantity of fuels (in K. Cal.) allowed in the SION correspond to a fuel having unit heat value 

of 8700 K. Cal. Import of any other fuel of higher/ lower unit heat value (as long as it is relevant to the 

facilities installed in the unit) may be permitted; quantity of which (in Kgs./Cubic mtr./K.Ltr.) may be 

worked out by dividing the K.Cal. Figures given in the SION by the actual unit heat value of the imported 

fuel. 

C496 Industrial/ Sanitary Iron 

Castings (Blast Furnace 

Route) 

1000 kgs. 1 Iron Ore/Iron Ore 

concentrates/Iron Ore Pellets 

having 65% or more iron 

2 Low Ash Metal-lurgical Coke 

(with Ash content below 15%) 

OR Coking Coal (with Ash 

content below 12%) 

Coking Coal (with Ash content 

below 12%) 

1500 kgs 

700 kgs OR 1000 

kgs. 

1000 kgs 

3 Limestone 300 kgs

C497 Iron Ore pellets (from 

Limonite Ore) 

C498 Iron Ore Pellets. (from 

Haematite Ore) 

C499 Magnesia Carbon 

Bricks/Shapes and/or 

Ramming Mass, 


4 Manganese Ore 90 kgs 

5 Dolomite 80 kgs 

6 Oxygen Lancing Tube 10 Mtrs. 

1000 Kgs 1 Lime Stone/Dolomite 35 Kgs 

2 Bentonite 5 Kgs 

3 Grinding Media 0.4 Kg 

4 Furnace Oil 40 Kgs 

1000 kgs. 1 Iron Ore Fines 1000 Kgs 

2 Lime Stone/ Dolomite 29 Kgs 

3 Bentonite 5 Kgs 

4 Chromium based grinding media 0.4 Kg 

having 10-18% chromium 

content in the steel balls of 

different diameters 

5 Furnace Oil 37 Kgs 

6 Flocculent 0.0017 kg 

1000 Kgs 1 Major Raw Materials comprising 

of: 

a)Dead Burnt Magnesite 

(Magnesium Oxide 92% & 

above) and/or i) Sea Water 

Magnesia (Magnesium Oxide 

94% and above) and/or ii) Fused 


94% andabove) 

b) Natural Graphite (Fixed Carbon 

85% Minimum) 

2 Additives comprising of : 

a) Phenolic Resins and/or 

i) Metallic Alloys of Aluminium, 

Silicon, Magnesium. 




C101 

1020 Kgs 

20 Kgs 

120 Kgs 

Upto 10 % of CIF 

value. 



C500 Magnesia Dolomite 

Bricks and Shapes and/or 

Ramming Mass, 



of: 

a) Dead Burnt Magnesite 


above) and/or 

i)Sea Water Magnesia 


above) and/or 

b) Magdolo Co-clinker(Magnesium 

Oxide 40% and above) 


Pitch Coke/ Tar Pitch 


600 kgs 

450 kgs 

190 kgs 


value. 



not be allowed.

C501 Magnesite Bricks and 



Mortars 

1000 Kgs 1 Major Raw Materials 

Comprising of : 

a) Dead Burnt Magnesite 


above) and/or i) Sea Water 

magnesia (Magnesium Oxide 

94% and above) and/or ii) Fused 


94%and above) 


a) Phenolic Resins and/or 

i)Ligno Sulphate and/or 

ii)Pitch Coke/Tar Pitch 



b)Cutting Tools 

C102 

1040 Kgs 

40 Kgs 

Upto 10% of CIF 

value. 



C502 Magnesite 

Chrome/Magnesia Coclinker 

Bricks and 



Mortars 

1000 kgs. 1 a) Major Raw Materials comprising 

of: i)Dead Burnt Magnesite 


above) and/or ii)Sea Water 


92% and above) and/or iii) 

Chromite (Chromium Oxide 40% 

Minimum) 

700 kgs 

b) Mag Chrome Co-clinker and/or 

i) Magnesium aluminium Coclinker 

or Magnesia Lime Coclinker 

(Magnesium Oxide 40% 

minimum) 

350 kgs 


a) Micro Fine Chrome Bond and/or 50 kgs 

b) Mettalic Alloy of Aluminium, 

Silicon, Magnesium 



value. 




C503 Magnesium Ferro Silicon 1000 kgs 1 Ferro Silicon 885 kgs. 

2 Magnesium Metal 100 kgs. 

3 Ferro Silicon Calcium 50 kgs. 

4 Misch Metal (containing rare 

earths : 98% minimum) 

25 kgs. 

Note: For import item No.4 prior permission from the Deptt.of Atomic Energy shall be obtained and 

submitted by the applicant alongwith the application for advance licence/ DFRC. 

C504 Non Alloy/ Alloy Steel 

Coated/ Plated Wires 

1000 kg 1 Wire rod of relevant grade of 

Steel 

OR 

1 a) Billets/ Blooms of relevant grade 

of steel 

b) CI/Steel Rolls/ Tungsten Carbide 

Rings/ Rolls for Rolling Mill 

c) Furnace Oil for captive oil fired 

re-heating Furnace 





0.62 kg 

30 kg

2 Dry Drawing Lubricant/ Coating 8 kg 

3 Tungsten Carbide dies 5 Nos. 

4 Wet Drawing Lubricant 4 kg.. 

5 Plastic/ Steel Bobbins/ Spools Net to net. 

6 Relevant Metal for coating/ 

Plating 

C103 

45 kg 

7 Lead (for Patenting) 3 kg 

Note: Import of items at Sl. No.4 shall be allowed against export of wet drawn steel wires of size below 

1.6mm only. 

C505 Hot Rolled Galvanized 

Non alloy steel 

Sheet/hoops & 

Strips/Wide Coils 

C506 Non alloy steel 

Galvanised wire 

1 kg 1 Non alloy hot rolled Steel Sheets/ 1.05 kg 

Coils 

2 Zinc 0.04 kg 

1000 kgs 1 a) Copper scrap/Ingots (if copper is 


0.04 kg 

b) Zinc 40 kgs 

c) Lead 3.3 kgs 

d) i)Furnace Oil (only for units with 30 kgs 

captive power plants) 

ii)Lubricant (only for units with 

captive power plant) 

0.65 kg 

1 e) i)Furnace oil for oil fired 

reheating furnace in rolling mill 

50 kgs 

ii) Furnace oil for ladle heating 6 kgs 

1 f) Cored wire of lead/lead shots (in 


free cutting steel sheet only) 

2 MAJOR INPUTS : 

2.5 kgs 

a) Non Alloy steel Melting 

scrap/Direct Reduced Iron 

(HBI/Sponge Iron) 

360 kgs 

b) Low Silica Lime Stone 218 kgs 

c) Metallurgical Coke 610 kgs 

3 i)ADDITIVES 

a) Cored wires/lumps/powder 1 kg 

of Calcium Silicide (CaSi) 

b) Silico Manganese 

OR 

16 kgs 

i) Ferro Silicon 6 kgs 

ii) Ferro manganese 10 kgs 

c) Raw Petroleum coke 5 kgs 

d) Cored wires/scrap/ingots/ shots 

of aluminium 

ii)MISC. ITEMS: 

1 kg 

a)Graphite Electrode 6 kgs 

b)Rolls/Tungsten Carbide rings 

for rolling mill 

c)Copper lined mould/ Copper 

mould for casting 

1.77 kgs 

0.013 kgs

C104 

d)Saw/Shear Blade 0.01 kg 

e)Ceramic coated lancing pipe 0.25 No. 

f)Temperature Tips/Celox inserts 0.05 No. 

g)Sampler tips 0.05 No. 

h)Submerged tuyers/ Oxygen 0.77 kgs 

lance pipe /Oxygen Super Sonic 

lance /tip. 

i)Atmospheric injector 4 kgs 

j)Casting Powder 2 kgs 

k) Silica Texture bellow Shroud 0.0052 kg 

iii)WIRE DRAWING MISC. 

ITEMS: 

a)Dry drawing lubricant 8 kgs 

b)Wire drawing soap 7 kgs 

c)Wet drawing lubricant 4 kgs 

d)Tungesten carbide dies 5 Nos. 

e)Plastic bobbins/spools 300 Nos. 

iv)REFRACTORY ITEMS: 10 Kg 

a)Runner Mass/castable for Mini 

Blast Furnace (MBF) 

b)Graphite Carbon refractories 

for Mini Blast Furnace (MBF) 

c)Magnesia reagent/ 

Desulphurisation compound 

d)Zirconia /Magnesia Nozzles 

e)Aluminium Graphite 

Nozzles/Monobloc 

Stopers/Stoper heads/ Stoper 

Rods/Shrouds 

f)Porous Plugs/seat 

Blocks/Sleeves/Slide Gate Plates 

g)Direct Bonded basic Bricks 

h)EBT Tube/Mass/Bricks 

i)Monolithic/Gunning/ Ramming 

Mass/Castables 

j)Dolomite Magnesia Carbon 

Bricks 

Note 1. The above norms is applicable only if the export product(s) is/ are manufactured through Mini 

Blast Furnace-Electric Arc Furnace route using liquid hot metal as the principal raw material in Electric 

Arc Furnace. 

2. Import of item atSl.No.3 (iii) (c), (d) and (e) shall be allowed against export of wire of size below 1 mm 

dia only.Import of Directo Reduced Iron shall be limited to 10% of total metallic input of 360Kg. 

Mentioned at item 2(a). 

C507 Non alloy steel 

1000 kgs 1 Major Inputs comprising of: 

Galvanised Wires (From 

a) Non Alloy Steel Melting Scrap 1200 Kgs 

melting scrap) 



a) Cored Wires/ Lumps/ Powder of 


b) Silico Manganese

c) 

Or 

(i) Ferro silicon 

(ii) Ferro manganese 

Raw Petroleum Coke 22.46 kgs 

d) Cored wires/ Scrap/ Ingots/ Shots 

of aluminium 

e) Copper scrap/ Copper 

Cathode/Copper wire Bar/Copper 

Rod (If copper is actually present 

in export product) 

0.04 kgs 

f) Cored Wires of lead/ Lead 

Shots.(in case of export of lead 

bearing free cutting steel only) 

2.5 kg 


a) Graphite Electrode 

b) Rolls/ Tungsten Carbide Rings 

for Rolling mill 

c) Copper lined moulds for casting 20 kg 

d) Saw/ Shear Blade 

e) Ceramic coated lancing pipe 

f) Temperature Tips 

g) Sampler Tips 

h) Refractory items, comprising of: 

C105 

1) Zirconia/ Magnesia Nozzles 

2) Aluminium-Graphite Nozzles/ 

Monoblock Stoppers/ Stopper 

head/Stopper Rods/ Shrouds 

3) Porous Plugs/ Seat Blocks/ 

Sleeves/ Slide Gate Plates 

4) Direct Bonded basic Bricks 

5) EBT Tube/ Mass/ Bricks 

3 i) 

6) Monolithic/ Gunning/ 

Ramming Mass/ Castables 

7) Dolomite Magnesia Carbon 

Bricks 

8) Ladle inner Nozzles/ collector 

Nozzles 

Casting Powder 

4 Wire drawing and galvanising 

Misc. Items: 

a) Dry drawing lubricants 

b) Wire drawing soft 

c) Wet drawing lubricants 37.7 kgs 

d) Tungston carbide dies 

e) Plastic bobbins/ Spools 

f) Zinc 40 kgs 

g) Lead 3.3 kgs 

5 Energy sources comprising of: 

a) (i) Furnace Oil (only for Units 

with captive power Plant) 

70 kgs

a) (ii) Lubricant (only for units with 

captive power Plant) 

C106 

0.65 kgs. 

5 b) (i) Furnace oil for oil-fired 

Reheating Furnace in Rolling 

Mill. 

50 kgs 

b) (ii) Furnace oil for Ladle heating 6 kgs. 

1. The above norms is applicable only if the export product(s) is/are manfactured through Electric arc 

furnace/ Induction furnace route using steel melting scrap as basic raw material. 

2. In case the product is manufactured through induction furnace route, the item at Sl.No 3(a) shall not be 

allowed. 

3. Import of item at Sl.No 4(c)(d)(e) shall be allowed against of export of wire below 1mm dia only. 

4. The item Non Alloy Steel Melting Scrap will be allowed as per the definition given in Section XV of 

Customs Tariff. 

C508 Hot Rolled Non Alloy 

Steel Plates/Sheets /hoops 

& Strips. (including 

skelp)/ wide Coils 

through DC arc Furnace 

Route (for open Cycle 

Operation). 

1000 kgs 1 a) Copper Scrap/Copper 


Bar/Copper Rod (if copper is 


0.04 kg 

b) Energy Sources/Fuels (Natural 

Gas/LNG, NGL 

(Condensate/gaseous), Naptha, 

HSD Oil, Furnace Oil) (only for 

plants having captive power plant 

with facilities installed for use of 

specific energy sources/fuel) 

2626330K. Cal 

c) Energy Sources/Fuels (Natural 

Gas/LNG,NGL 

(condensate/gaseous), Naptha, 

High Speed Diesel Oil, Light 

Diesel Oil, Furnace Oil)(for reheating 

furnace in rolling mills, 

ladle heating and tundish preheating) 

565670 K Cal. 

NGL for re-heating furnaces in 

rolling mills, ladle heating and 

tundish pre-heating (only for 

plants having facilities installed 

for the use of this fuel) 

56 kgs 

2 MAJOR INPUTS : 

a)Non-Alloy Steel Melting 1111 Kgs. 

Scrap/Direct reduced iron 

(sponge iron/Hot Brequitted 

Iron)/ Pig Iron 

b)Lime Stone 200 kgs 

3 i)ADDITIVES : 

a)Cored wires/lumps/ powder of 1 kg 


b)Silico Manganese 

13 kgs 

OR 

i)Ferro Silicon 3 kgs 

ii)Ferro Manganese 10 kgs 

c)Raw Petroleum Coke /Calcined 5 kgs 

Petroleum Coke/Metallurigical 

Coke/Coke Breeze 

d)Cored Wires/Scrap/ 

1 kg 

Ingots/Shots of Aluminium 

e)Dolomite 40 kgs 

f)Ferro Titanium/ Ferro 3 kgs

Vanadium/ Ferro Phosphorous/ 

Ferro Aluminium/ Ferro 

Chrome/Ferro Boron/Ferro 

Niobium(if these are actually 


3 ii)MISC. ITEMS: 

C107 


b)Rolls for Rolling Mill 1.2 kgs 

c)Copper lined Moulds for 

casting 

0.013 kg 

d)Saw/Shear Blade 0.1 kg 

e)Ceramic coated lancing pipe 0.02 No. 

f)Temperature Tips 0.1 No. 

g)Sampler Tips 0.5 No. 

h)Casting Powder 2 kgs 

i)Fluorspar/Mould Flux 1.5 kgs 

j)Oxygen/Sampler probes 0.002 No. 

k)Rolls for Caster 0.5 kg 

l)Hydraulic Oil/ Lubricating Oil 1.7 kgs 

m)Transformer Oil 0.59 kg 

3 iii)REFRACTORIES : 

a)Zirconia /Magnesia Nozzles 

b)Aluminium Graphite 

Nozzles/Monobloc 

Stopers/Stoper heads/Stoper 

Rods/Shrouds 

c)Porous Plugs/seat 

Blocks/Sleeves/Slide Gate Plates 

d)Direct Bonded basic Bricks 

e)EBT Tube/Mass/Bricks 

f)Monolithic/Gunning/ Ramming 

Mass/Castable 

g)Dolomite Magnesia Carbon 

Bricks 

h)Ladle inner Nozzles/ collector 

Nozzles/ Nozzle filling Mass/ 

Refractory Nozzles 

i)Reheating Furnace Refractories 

j)Black Refractories 

k)Roof Refractories 

l)Tundish Refractories 

m)Tundish Gunning Mass 

n)Tundish Powder 

o)Purging Refractories 

25.8 kgs 

Note 1.This norm is applicable for export product manufactured through DC Electric Arc Furnace Route 

for open cycle operation. 

Note 2. Items at Sl.No. 3(i) (f) i.e. Ferro-Titanium/Ferro Phosphorous/Ferro Chrom/Ferro Boron/Ferro 

Niobium will be allowed if these are actually present in the export product. 

Note: 3 Import of either one or a combination of the energy sources /fuels mentioned against Sr. Nos. 1 (ii)

& 1 (iii) shall be permitted within the overall calorific value, subject to further actual user condition. 

Note : 4 Quantity of specific fuel (s) in kgs/Cubic meter/K.ltr shall be obtained by dividing the K.Cal figure 

by the net calorific value/heal value of the fuel (s) detailed below:-Net Caloric values of fuels 

1. Natural Gas -8400K.Cal/Cubic Mtr. 

2. LNG-11436K.Cal/Kg 

3. Naptha-10610K.Cal/Kg 

4. NGL-10610K.Cal/Kg 

5. LDO-10060K.Cal/Kg 

6. F.O.-9790K.Cal/Kg 

7. HSD-10230K.Cal/Kg 

Note : 5. Deleted 

Note : 6 Import of Direct Reduced Iron shall be allowed up to 90% of the total metallic input of 1111 kgs 

Note : 7 Import of Pig Iron may be allowed upto 10% of the total metallic input of 1111 kgs. 

C509 Non alloy Steel Plates 1 kg 1 Non alloy Steel Slabs 1.10 kg 

C510 Non Alloy/ Alloy Steel 

(Excluding Stainless 

Steel) Wires (Uncoated) 

1000 kgs 1 Wire rod of relevant grade of 

steel 

1030 kgs 

2 Dry Drawing Lubricant/ Coating 8 Kgs 

3 Tungsten Carbide Dies 5 Nos. 

4 Wet Drawing Lubricant 4 kg. 

5 Plastic/ Steel Bobbins/ Spools Net to net. 

Note: Import of Items at Sl.No. 4 shall be allowed against export of wet drawn steel wires of size below 

1.6mm only. 

C511 Non alloy/ Alloy/ stainless 

steel Bars and Rods 

(including Rounds, flats, 

Hexagon, octoagon, wire 

rod, cold twisted 

deformed bars, thermomechanically 

treated 

reinforcing Bars etc.) 

Angles, Shapes and 


Beams, Joists,Channels 

Special Profiles etc. ) 

Plates/ sheets/ strips/ wide 

coils/ Blooms/ Billets/ 

Slabs and Ingots 

1000 Kgs 1 Calibrated Iron Ore with 65% 

and more Iron content 

C108 

(a) 690 Kg for 

stainless steel (b) 

1250 Kg for other 

steel 

2 Non alloy steel melting scrap (a) 200 Kg for 

stainless steel (b) 360 

Kg for other steel 

3 Liquefied Petroleum Gas 76 Kgs 

4 Reformer catalyst 0.06 Lts 

5 Briquetting moulds 0.0006 Nos 

6 Non coking coal (with ash 

content less than 12%) 

850 Kgs 

7 Graphite Electrode 6 Kgs 



1Kg 

9 Rolls/Tungston Carbide rings for 1.77 Kgs 

rolling mills 



OR 

(Qty. in Kgs as in 

formula 1 of note 7) 

11 a) Ferro Silicon (Qty. in Kgs as in 


b) Ferro Manganese (Qty. in Kgs as in 


12 Refractory comprising of : a) 

Zirconia/magnesia nozzles 

b) Aluminium Graphite 

nozzles/monoblock 

stoppers/stopper heads/stopper 

rods/shrouds 

(i)10 Kgs for non 

alloy steel 

(ii)25 Kgs for 

stainless steel 

c) Porous plugs/ seat blocks/ (iii)15 Kgs for alloy

C109 

sleeves/ slidegate plates steel other than 



e) EBT tubes/Mass/Bricks 

f) Monolithic/gunning/ramming 

mass/castables 

g) Dolomite/magnesia carbonbricks 

13 Other Ferro alloys including 

nickel oxide, sinter, ferro nickel, 

charge chrome provided the 

alloying element(s) is/ are 


product. 

14 Casting Powder 2 Kgs 

15 Saw/Shear blade 0.01 Kgs 

16 Copper scrap/Copper 



actually present in the steel) 

0.04 Kgs 

17 Furnace oil (for captive power 

plant) 

70 Kgs 

18 Furnace oil for oil fired reheating 50 Kgs 


19 Furnace oil for ladle heating 6 Kgs 

20 Lubricant/Gear oil (for captive 

power plant) 

0.65 Kgs 

21 Low silica Lime Stone 100 Kgs 

22 Cored wire/scrap/ingot of 

aluminium 

1 Kg 

23 Cored wire of lead/lead shots (in 


steel only) 

2.5 Kgs 

24 Raw Petroleum Coke 5.0 Kgs 

25 Ceramic coated lancing pipe 1 Nos 

26 Temperature Tips 0.5 Nos 

27 Sampler Tips 0.25 Nos 

(Qty. in kgs. as in 

formula 4 of Note 7 

below) 


Customs Tariff.2. The above norms are applicable only if the export product(s) is manufactured through 

Gas/Coal based sponge iron-Electric Arc Furnace/ Induction Furnace route using iron ore as the basic raw 

material 

3.The item at Sl. No.(6) would not be allowed If export product(s) are manufactured through gas based 

sponge iron route and the items at Sr. No.(3) (4) & (5) would not be allowed if export product(s) are 

manufactured through coal based sponge iron route 

4. In case of export product(s) manufactured through induction furnace route, the item at Sr.No.(7)will 

not be allowed.5. In case of continuous cast billtes/blooms/slabs produced through continuous casting 

route, rolling mill rolls and Tungsten carbiderolls, item at Sl.No.(9) will not be allowed. Similarly, against 

export of rolled blooms, billets, slabs, refractories item at Sl.No. 12(a)(b)(c) shall not be allowed, however, 

in case of export of rolled produced out of continuous blooms item mentioned above i.e. rolls/Tunsten rings 

and refractories shall be allowed. 

Import of item at Sr.No. (9)(10)(12)(a)(b)(14)(15)&(18) shall not be permitted against export of 

ingots.7)Formula:1) 5.5 x (mean average of % silicon content in Steel)(mean average of Manganese 

content in Steel) 

C512 Non Alloy/Alloy/ 1000 kgs 1 i)Copper Cathode/Copper Wire 0.04 kg 

Bar/Copper Rods (if copper is

Stainless Steel Bars & 


Flats, Hex- agons, 

Octagons, Wire rods, 

Cold twisted deformed 

bars, thermo mechnically 

treated reinforcing Bars) 



beams, Joists, Channels, 

special profiles), Plates 

Sheets/Strips/wide Coils, 

Blooms, Billets, Slabs, 

Ingots, wires, pipes and 

tubes, Skelp, Rails and 

Sleeper 

C110 


ii)Copper Plates/Micro alloyed 0.1 kg 

copper plate (for use in copper 

lined casting moulds) 

iii)Furnace Oil/LSHS/Naptha 13 kgs 


i)Non-Alloy Steel Melting Scrap 330 kgs 

ii)Pig Iron 31.774 kgs 

iii)Low silica lime Stone 620 kgs 

iv)Coking Coal 

1000 kgs, 700Kgs. 

OR 

Low Ash Metallurgical Coke 

(LAM Coke) 

Metallurgical Coke 700 kgs 


a) Cored wires/scraps/ shots/ingots 

of aluminium 

1.466 kgs 

b) Ferro Niobium 0.035 kg 

c) Ferro Vanadium 0.004 kg 

d) Ferro Silicon/ Ferro Manganese/ 

Silico Manganese/ Other ferro 

Alloy(s) (including Nickel Oxide 

Sinter/Ferro Nickel/Charge 

chrome provided the alloying 

elements is/are actually present in 


17.00 kgs 

e) Calcium Silicide (CaSi) 1.5 kg 

f)Raw Petroleum Coke 2.3 kgs 

3 ii) MISC.ITEMS: 

a)Silicon Carbide Grains 2.0 kgs 

b)Rolls/Tungsten Carbide rings 1.77 kgs 


c)Celox Inserts/Oxygen 0.004 kg 

measuring probes 

d)Thermodynamic elements 0.325 kg 

e)Magnesia Reagent/ 


0.006 kg 

f)Silica Gel/Mobile Sorbead 0.010 kg 

g)Freon Gas-142/114(Net of 

Cylinders) 

0.010 kg 

h)Stainless steel Hoses 0.007 kg 

i) shear Blades/Saw Blades 0.010 kg 

j) Oxygen Lance pipes 0.750 kg 

k)Rolling Mill Oil 0.500 kg 

l)Casting Powder 2.083 kg 

m)Temperature Tips 0.022 kg 

n)Canned Elements/Pearmeable 

elements for combined blowing 

o)Graphite electrodes (only those 

having VADR facilities) 

0.200 kg 

1.000 kg

C111 

p)Welding flux 8.0 kgs 

q)Weld wire 4.0 kgs 

r)Surface protection film 13.3 kgs 

s)Copper lined mould for casting 0.013 kg 

t) Refractory Bricks/ Shapes 9 kgs 

and/or Dead Burnt/ Sea Water/ 

Fused Magnesia for Captive use 

for manufacture of Bricks/ 

Shapes 

u) Monolithic Refractory Viz. 5 kgs 

Castable, Gunning Mass & 

Ramming Mass and/ or Dead 

Burnt/ Sea Water/ Fused 

Magnesia for captive use for 

manufacture of Monolithic 

Refractory 

v) Special Refractories namely, 1 kg 

Continuous Cast refractories 

(such as Shrouds, Mono Block 

Stoppers and Sub-entry Nozzles), 

Slide Gate refractories, Porous 

Plug Zircon/ Zirconia Nozzles 

and Tundish Nozzles 

Note 1.The above norm is applicable only if the export product(s) is manufactured through Blast Furnace- 

LD Converter/ Open Hearth/ Energy Optimising Furnace routes in the integrated steel plants. 

2. Ferro Niobium and Ferro vanadium would be permitted only if the alloying element namely Niobium 

and Vanadium is present in the export product. 

3. Item of import at Sl.No.1 (ii), 3(ii)(b)(i)(l) (p) (q)(s) and continuous cast refractories and Tundish 

Nozzles at (v) shall not allowed in case of export of Steel ingots. 

4. Item of import at Sl.No.1 (ii), 3(ii), (c), (m) & 3 (iii) (a), (b), shall not be allowed in case of rolled blooms/ 

billets/ slabs. However, against export of rolled billets made through continuous cast blooms, continuous 

cast refractories & Tundish Nozzles under 3(ii)(v) shall be allowed. 

5. Item of import at Sl.No.3 (ii) (p) and (q) shall be allowed in case of export of pipes and tubes only. The 

item of import at Sl. No 3 (ii) (r) shall be allowed in case of export of CRGO/CRNGO sheets. 

6.The item NonAlloy Steel Melting Scrap will be allowed as per the definition given in section XV of 


7.The item at Sl. No. 3 (ii)(s) shall not be allowed in case of import of item at Sl.No.1 (ii). Similarly, in case 

of import of item at Sl.No. 1 (ii), the item at Sl.No.3 (ii) (s) will not be allowed. 

C513 Non-alloy Steel bars & 

rods (including Rounds, 

Flats, Hexagons, 

Octagons, Wire Rods, 

Cold Twisted Bars, 

thermo mechanically 

treated reinforcing bars), 

Angles, Shapes & 


beams, joist, channels, 

special profiles etc.) and 

Rails 

C514 Non-Alloy Steel Bars & 


Flats, Hexagons, 

Octagons, Wire Rods, 

Cold Twisted deformed 

bars, 

1000 kgs. 1 Non Alloy steel Ingots 

OR 

1070 kg 

Non Alloy Steel Blooms/ Billets 1050 kg 

OR 

Non-alloy Steel Re-rollable 

Scrap as per IS: 2549-1994 

1070 kg 

2 Rolls for rolling mills 1.77 kg 

3 Furnace oil for oil fired reheating 50 kg 

furnace in rolling mill 

4 Saw/ Shear blade 0.01 kg 

1000 kgs 1 a)Copper Scrap/Copper 


Bar/Copper Rod (If copper is 


b)Cored Wires of Lead/ Lead 

Shots (in case of export of lead 

bearing free cutting steel only) 

0.04 kg 

2.5 kg

Thermomechanically 

treated reinforcing Bars 

etc.,) Angles, Shapes & 

Sections (including Beam, 

Joists, Channels, Special 

Profiles etc.) 

Plates/Sheets/ Strips/ 

Wide Coils, 

Blooms/Billets/ 

Slabs/Ingots. 

C112 

c)1)i)Furnace Oil (only for Units 

with captive power plant) 

ii)Lubricant (only for units with 


70 kg 

0.65 kg 

2)i)Furnace Oil for oilfired 50 kg 


Mill 

ii)Furnace Oil for Ladle heating 6 kgs 


a)Non-Alloy Steel Melting scrap 1200 kgs 

b)Low Silica lime stone 95 kgs 


a)Cored wires/Lumps/Powder of 1 kg 


b)Silico Manganese 

15 kgs 

OR 

i) Ferro Silicon and 5 kgs 

ii) Ferro Manganese 10 kgs 

c)Raw Petroleum Coke 5 kgs 

d)Cored Wires/Scrap/Ingots/ 

Shots of Aluminium 

3 ii)MISC. ITEMS: 

1 kg 


b)Rolls/ Tungsten Carbide Rings 1.77 kgs 


c)Copper lined moulds for 0.019 kg 

castings 

d)Shear Blades/ Saw Blades 0.1 kg 

e)Ceramic Coated lancing pipe 0.75 kg 

f)Temperature Tips 0.022 kg 

g)Sampler Tips 0.25 No. 

h)Casting Powder 2 kgs 

3 iii)REFRACTORIES: 

a)Zirconia/ Magnesia Nozzles 

b)Aluminium-Graphite Nozzles/ 

Monoblock Stoppers/Stopper 

head/Stopper Rods/Shrouds 

c)Porous Plugs/Seat Blocks/ 

Sleeves/Slide Gate Plates 

d)Direct Bonded Basic Bricks 10 kgs 

e) EBT Tube/Mass/Bricks 

f)Monolithic/Gunning/Ramming 

Mass/castables 

g)Dolomite Magnesia Carbon 

Bricks 

h)Ladle Inner Nozzles/ Collector 

Nozzles 

Note:1.The above norms is applicable only if the export product(s) is/ are manufactured through Electric 

Arc Furnace route/ Induction Furnace route using steel scrap as basic raw material. 

2. In case of export of continous cast billets blooms/slabs produced through continuous casting route,

olling mill rolls and tungsten carbide ring i.e. Item at Sl.No.3 (ii) (b) will not be allowed. Similarly, against 

export of Rolled Blooms, Billets, Slabs, refractory items 3(iii)(a&b) shal not be allowed. However, in case 

of export of rolled products including billets produced out of continuous cast blooms/ billets both item 

mentioned above i.e. rolls/ tungsten carbide rings and refractories shall be allowed. 

3. Items of import at Sl.No.1 (c) (2), 3 (ii) (b),(c), (d), (h) and 3 (iii) (a&b) shall not be permitted against 

export of Ingots. 



C515 Non-alloy steel wire 1000 Kgs 1 Major Input comprising of: 

(uncoated) 

a) Non Alloy Steel melting 360Kgs. 

scrap/Direct Reduced Iron 

(HBI/Sponge Iron) 

b) Low Silica lime stone 218 Kg 

c) Metallurgical coke (with ash 

content below 15%) 


C113 

i) Cored wires/ lumps/ powder of 


ii) Silico Manganese 

OR 

a) Ferro Silicon 

b) Ferro manganese 

610Kg. 

iii) Raw Petroleum coke 22.46 Kgs 

3 a) 

iv) Cored Wires/ Scrap/ Ingots/ 

Shots of aluminium 

v) Copper Scrap/ Copper 

Cathode/ Copper Wire 

Bar/Copper Rod(if copper is 


product) 

vi) Cored wire of lead/ lead shots 

(in case of export of lead bearing 


Refractories and Misc. Items: 

i) Graphite Electrode 

ii) Rolls/ Tungsten Carbide rings 


iii) Copper lined mould for 

casting 

iv) Saw/ shear blade 

v) Ceramic coated lancing pipe 

vi) Temperature tips/ Celox 

inserts 

vii) Sampler tips 

viii) Submerged tuyers/Oxygen 

lance pipe/Oxygen Supersonic 

lance/tip. 

ix) Atmospheric injector 

x) Stainless Steel hoses 

xi) Refractory items comprising 

of: 

a) Runner Mass for Mini Blast 

Furnace/ Castable for Mini Blast 

0.04 kgs 

2.5 kgs

C114 

Furnace (MBF) 

b) Graphite Carbon refractories for 

Mini Blast Furnace (MBF) 

c) Magnesia reagent 

Desulphurisation compound 

d) Zirconia/ Magnesia nozzles 

e) Aluminium graphite nozzles/ 

Monoblock stoppers/stopper 

heads/ stopper rods/ shrouds 

f) Porous plugs/ Seat Blocks/ 

Sleeves/ Slide gate plates 

g) Direct bonded basic bricks 

h) EBT tubes/ Mass/ Bricks 

i) Monolithic/gunning/ramming 

Mass/Castables 

j) Dolomite/ Magnesia Carbon 

bricks 

xii) Casting Powder 

3 b) Wire drawing misc. items 

Comprising of: 

i) Dry drawing lubricant 

ii) Wire drawing soap 

27 Kg 

iii) Wet drawing lubricant 34 Kg 

iv) Tungsten carbide dies 

v) Plastic bobbins/ spools 


a) i) Furnace oil ( for units with 


30 Kg 

ii) Lubricant ( for units with 


0.65 kg. 

4 b) i) Furnace oil for oil fried 

reheating frunace in Rolling Mill 

50 Kg 

ii) Furnace oil for ladle heating 6 kg 

Note 1.The above norms is applicable only if the export product(s) is/are manufactured through Mini Blast 

Furnace-Electric Arc Furnace route using liquid hot metal as the principal raw material in Electric Arc 

Furnace. 

2. Import of item at Sl. No. 3(b) (iii) (iv) (v) shall be allowed against export of wire of size below 1mm dia 

only.Import of Direct Reduced iron shall be limited to 10% of total metallic input 360Kgs. 

C516 Non-Alloy steel wire 1000 kg 1 Major Inputs comprising of: 

uncoated (from melting 

a) Non Alloy Steel Melting Scrap 1200 Kgs 

scrap) 



a) Cored Wires/ Lumps/ Powder of 


b) Silico Manganese 

Or 

(i) Ferro silicon 

(ii) Ferro manganese 

c) Raw Petroleum Coke 22.46 kgs 

d) Cored Wires/ Scrap/ Copper 

Cathode/Copper Wire

e) 

Bar/Copper Rod(if copper is 


product) 

Copper Scrap/ Copper 

Cathode/Copper wire Bar/Copper 

Rod(if copper is actually present 

in the export product) 

0.04 kgs 

f) Cored Wires of lead/ lead Shots. 

(in case of export of lead bearing 


2.5 kgs 

3 Refractories & Misc. Items 

a) Graphite Electrode 

b) Rolls/ Tungsten Carbide Rings 

for Rolling mill 

c) Copper lined Moulds for casting 20 kg 

d) Saw/ Shear Blade 

e) Ceramic coated lancing pipe 

f) Temperature Tips 

g) Sampler Tips 

h) Refractory items comprising of: 

C115 

1) Zirconia/ Magnesia Nozzles 

2) Aluminium Graphite Nozzles/ 

Monoblock Stoppers/ Stopper 

head/Stopper Rods/ Shrouds 

3) Porous Plugs/ Seat Blocks/ 


4) Direct Bonded basic Bricks 

5) EBT Tube/ Mass/ Bricks 

3 i) 

6) Monolithic/ Gunning/ 

Ramming Mass/ Castables 

7) Dolomite Magnesia Carbon 

Bricks 

8) Ladle inner Nozzles/ collector 

Nozzles 

Casting Powder 

4 Wire drawing Misc. Items 

comprising of: 

a) Dry drawing lubricants 34 kgs 

b) Wire drawing Soap 

c) Wet drawing lubricant 

d) Tungsten carbide dies 

e) Plastic bobbins/ spools 


a) (i) Furnace Oil (for Units with 


70 kgs 

(ii) Lubricant (for units with 


0.65 kg 

5 b) (i) Furnace oil for oil fired 


Mill. 

50 kgs 

(ii) Furnace oil for Ladle heating 6 kg

Note 1. The above norms is applicable only if the export product(s) is/are manfactured through Electric 

arc furnace/ Induction furnance route using steel melting scrap as basic raw material. 

2. In case the product is manufactured through induction furnace route, the item at Sl.No 3(a) shall not be 

allowed. 

3. Import of items at Sl.Nos 4(c)(d) and (e) shall be allowed against export of wire of size bellow 1mm dia 

only. 



C517 Non-Alloy/ Alloy steel, 

Ingots, Blooms, Billets, 

Slabs, Bars and rods 

(including Rounds, Flats, 

Hexagons, Octagons, 

Wire rods, Cold Twisted 

Deformed Bars, Thermo 

Mechanically Treated 

Reinforcing Bars), 



Beams, Joists, Channels, 

Special profiles) 

1000 Kg 1 Major Input comprising of: 

C116 

i) Non Alloy Steel melting scrap/ 175 kg 

Pig Iron 

ii) Direct Reduced Iron (HBI/ 285 kg 

Sponge Iron) 

iii) Low Ash Metallurgical Coke 500 Kg 

(Ash content: 15% max.) 

iv) Low Silica Lime Stone 100 kg. 

2 Additive comprising of: 

i) Calcium Silicide Lumps 

Powder in Cored wires 

ii) Silico Manganese/ Ferro 

Silicon/ Ferro Manganese 

iii) Raw/ Calcined Petroleum 

Coke/ Graphite Powder 

iv) Aluminium Scrap/ Ingots/ 

Shorts/ Wires 

v) Other ferro alloy(s) (including 

Ferro/ Charge Nickel/ Nickel 

Oxide Sinter/ Charge/ Ferro 

Chrome/ Ferro Vanadium/ Ferro 

Molybdenum/ Ferro Titanium/ 

Ferro Niobium) provided the 

alloying element(s) is/are 

actually present in export product 

vi) Sulphur Stick/ Sulphur 

Powder in Cored Wire (in caseof 

export of Sulphur bearing free 

cutting steel only) 

vii) Lead Wire/ Shots/ Powder in 

Cored wire (in case of export of 

lead bearing free cutting steel 

only) 

3 Misc. Inputs comprising of: 

0.6 kg 

15 kg 

4 kg 

1 kg 

5 kg 

2.5 kg 

4 kg 

a) Graphite Electrodes 4 kg 

b) CI/ Steel Rolls/ TC Rolls/ Rings 


0.6 kg 

c) Copper lined Mould/ Copper 

Mould for Continuous Casting 

0.01 kg 

d) Shear blade 0.01 kg 

e) Temperature tips/ Celox inserts 0.05 Nos. 

f) Sampler tips 0.05 Nos. 

g) Submerged tuyers/ Atmospheric 

injector/ Oxygen lance pipe/ 

Oxygen Supersonic lance tip 

h) Shaped Refractories (Fired/ 

Unfired) 

0.77 kg 

5 kg for non alloy 

steel 

9 kg for alloy steel.

I) Monolithic Refractories (incl. 

Castables/ Ramming Mass/ 

Gunning Mixes) 

j) Specialty Refractories namely, 

CC refrctory (Shrouds, Mono 

Block Stopper, SE Nozzles), 

Slide Gate Refractory, Porous 

Plug, Zircon/ Zirconia Nozzles & 

Tundish Nozzles) 

1 kg 

k) Casting Powder 1 kg 


C117 

4 kg for non alloy 

steel 

5 kg for alloy steel. 

a) i) Furnace oil for Power 30 kg 

Generation (for units with captive 

power plant only) 

ii) Lubricant for Power Plant (for 0.6 kg 

units with captive power plant) 

b) i) Furnace oil for Rolling Mill 30 kg 

(for units with captive oil fired 

reheating furnace) 

ii) Furnace oil for Ladle/ Tundish 4 kg 

heating 

Note 1.The above norms is applicable only if the export product(s) is/are manufactured through Mini Blast 

Furnace-Electric Arc Furnace route (with/without captive DRI plant) using Hot metal as the principal raw 

material in Electric Arc Furnace.Units with captive DRI plant may import inputs for DRI as per the 

relevant SIONs. 

2. In case of export of continuous cast billets/ blooms/ slabs, items at Sl.No.3(b) and 4(b)(i) shall not be 

allowed. Similarly against export of rolled bloom, billets,slabs through ingot route, refractory items 3(J) 

shall not be allowed. However, in case of export of rolled billets/ blooms/ slabs produced out of continous 

cast bloom/ billets/ slabs, both items mentioned at Sl.No.3(b) and 4(b)(i) shall be allowed.Further, against 

export of billets/ blooms/ slabs, quantities of all other inputs shall be reduced by 5%. 

3. In case of export of Ingots, import of items at Sl.No.3(b), (c), (d), (j) & 4(b) shall not be permitted. 

Further quantity of other inputs shall be reduced by 10%. 

4. Quantity of Silico-Manganese shall not exceed 60% of total permitted quantity of 15 kg. 

C518 Refractories Viz. 

Magnesite bricks 

C519 Silica Bricks/ Shapes for 

Blast Furnace 

1 MT 1 Dead Burnt magnesite 


above) 

1.1 MT 

1000 kgs. 1 Quartzite 1570 kgs 

2 (i) Phenolic Based Resin (Liquid) 70 kgs 

(ii)Phenolic based Resin 

(Powder) 

(iii) Ligno Sulphate 

OR 

(iv)Goulac 

3 (i) Micro Silica and/ or fused 

Silica 

(ii) Silicon Metal 

OR 

3 (i) Iron Ore Powder 

(ii) Hydrated Lime 

(iii) Silicon Metal 

30 kgs 

24 kgs 

9 kgs 

21 kg 

15 kgs 

12 kgs 

79 kgs 

21 kg 

4 Alloy Steel Mould 0.03 No. 

5 Wooden Mould 0.013 No. 

C520 Silica Bricks/ Shapes for 1000 kgs. 1 Quartzite 1570 kgs 

Coke Oven 2 (i) Phenolic Based Resin (Liquid) 70 kgs 

(ii) Phenolic based Resin 30 kgs 

(Powder)

C521 Silica Mortar 

C522 Silico Manganese (Si Mn) 

Ligno Sulphate 

OR 

2. Goulac 

3 (i) Micro Silica and/ or Fused 

Silica 

(ii) Silicon Metal 

OR 

3 (i) Iron Ore Powder 

(ii) Hydrated Lime 

(iii) Silicon Metal 

C118 

24 kgs 

9 kgs 

21 kgs 

15 kgs 

14 kgs 

88 kgs 

21 kgs 

4 Alloy Steel Mould 0.04 Nos. 

5 Wooden Mould 0.07 Nos. 

1000 kgs. 1 Carboxyl Methyl Cellulose 10 kgs 

2 Sodium Hexameta Phosphate 5 kgs 

1000 kg. 1 High grade Manganese Ore (with 750 kg 

+ 40%Mn) 

2 LAM coke/ Raw petroleum coke/ 800 kg 

Australian Char/ Anthracite Coal 

(with fixed Carbon 88% 

minimum and Ash content 6% 

maximum)/ Non Coking Coal 

3 Carbon Electrode/paste 30 kg 

4 Furnace oil */ LSHS/ HFO * 1300 kg 

5 Lubricating/ gear Oil * 8 kg 


C523 Stainless Steel Wires 1000 kgs 1 Non alloy steel melting scrap 660 kgs 

(from melting scrap) 

2 Graphite Electrode 6 kgs 



1 kg 

4 Rolls/ Tungston carbide rings for 1.77 kgs 

rolling mills 



OR 

Qty in Kgs as in 

Formula (i) of Note 4 

6 a) Ferro Silicon Qty in Kgs as in 

Formula (ii) of Note 

4 

b) Ferro Manganese Qty in Kgs as in 

Formula (iii) of Note 

4 

7 Refractory comprising of : 25 kg 

a) Zirconia/ magnesia nozzles 

b) Aluminium-graphite nozzles/ 

monoblock stoppers/ stopper 

head/ shrouds 

c) Porous plugs/ Seat blocks/ 

sleeves/ slidegate plates 


e) EBT Tubes/ mass/ bricks 

f) Monolithic/ gunning/ ramming 

mass/ castables 

g) Dolomite/ magnesia carbon 

bricks

8 Other ferro alloy(s) (Including 

charge/ ferro nickel & charge 

chrome ) provided the alloying 

elements is actually present in the 


9 Casting powder 2 kgs 

10 Saw/ shear blade 0.01 kg 

11 Copper scrap/ Copper 




product) 

0.04 kg 

12 Furnace oil (For captive power 

plant) 

70 kgs 

13 Furnace oil for oil fired reheating 50 kgs 


14 Furnace oil for ladle heating 6 kgs 

15 Lubricant (for captive power 

plant) 

0.65 kgs 

16 Low silica lime stone 100 kgs 

17 Cored wire/ scrap/ ingots of 

aluminium 

1 kg 

18 Cored wire of lead/ lead shots in 


free cutting steel only 

2.5 kgs 

19 Raw Petroleum coke 5 kgs 

20 Ceramic coated lancing Pipe 1 No 

21 Temperature tips 0.5 No. 

22 Sampler tips 0.25 No. 

23 a) Dry drawing lubricant/ coating 9 kg 

b) Wire drawing soap 8 kg 

c) Tungsten carbide dies 1 No 

d) Wet drawing lubricant/ coating 4 kgs 

e) Diamond/ Compax dies 4 Nos 

f) Plastic Bobbins/ spools 300 Nos 

C119 

Qty in Kgs, in respect 

of each ferro alloy as 

in formula iv of note 

4 

Note:1. The above norm is applicable only if the export product(s) is manufactured through electric arc 

furnace route/ induction furnace route using steel scrap as basic raw material. 

2. Value of Misc. items at sl.no. 2,4,5,7(a) to 7(g),19,20,21,22,23(a) to 23(e) shall not excced 25% of the total 

CIF value of the licence. 

3. In case the product(s) is manufactured through induction furnace route, the item at Sl. No. 2 will not be 

allowed. 

4. (i) 5.50 X(mean average of % Manganese content+mean average of % Silicon content in Steel) 

(ii) 1100 X (mean average of % Silicon content In Steel)/(mean average of % Silicon content in ferro 

silicon) 

(iii) 1100 X (mean average of % Manganese content in steel)/(mean average of % Manganese content in 

ferro manganese) 

(iv) 1100 X (Mean average of % alloy content in steel) /(mean average of % alloy content in respective 

Ferro alloy) 

5. Items at Sl.No 23(d) to 23(f) would be allowed against export of wire below 1mm dia only. 

C524 Stainless Steel Bars & 


1 Tonne 1 Blooms/ Billets of relevant grade 

of stainless steel 

OR 

1030 kg

Flats, Wire Rods etc. but 

excluding Bright Bars), 



special profiles) 

1 Ingots of relevant grade of 


2 CI/ Steel rolls for Hot rolling 

Mill 

3 Relevant Shear Blades/ Saw 

Blades 

4 Relevant fuel (for fuel fired reheating 

furnace only) 

5 Relevant fuel for electric power 



plant / source only) 

C120 

1050 kg 

0.60 kg (if input is 

slab) 1.20 kg (if input 

is ingot) 

0.01 kg 

261000 K. Cal. 

217500 K. Cal. 

Note 1. The quantity of fuel for power generation (i.e 217500 K. Cal.) which is based on a power 

consumption norm of approx. 100 KWH per tonne of export product has been allowed assuming that 

captive power plant/ source of at-least matching capacity exist. In case, the capacity of the Captive Power 

Plant/ source in a given unit is lower, quantity of fuel to be allowed for import will be reduced on pro rata 

basis. 

Note 2. The quantity of fuels (in K. Cal.) allowed in the SION correspond to a fuel having unit heat value 

of 8700 K. Cal. Import of any other fuel of higher/ lower unit heat value (as long as it is relevant to the 

facilities installed in the unit) may be permitted; quantity of which (in Kgs./Cubic mtr./K. Ltr.) may be 

worked out by dividing the K. Cal. Figures given in the SION by the actual unit heat value of the imported 

fuel. 

C525 Stainless Steel (Excluding 

Exhaust Valve Steel) 

Semi-finished Products 

(Blooms, Billets & Slabs) 

and Ingots 

1 Tonne 1 Major Inputs : In Kg 

a) Non-alloy Steel Melting Scrap, 

Pig Iron, Sponge Iron including 

Hot Briquetted Iron (HBI) 

As per Note 2. 

2 Additives (Ferro Alloys/ Metals/ (In Kg. per Kg. 

Compounds) : 

content of alloying 

element in the export 

product) 

a) i) Ferro Silicon (Si : 75%) 1.43 

a) ii) High Carbon Ferro Manganese 1.43 

(Mn : 75%) 

OR 

a) ii) Manganese Metal 1.04 

b) Charge Chrome, High Carbon 

Ferro Chrome (Cr : 60%) 

OR 

1.79 

b) Low Carbon Ferro Chrome (Cr : 

70%) 

1.53 

c) Unwrought Nickel (Ni : 99%) 

OR 

1.04 

c) Ferro Nickel, Nickel Oxide 

Sinter (Ni : 40%) 

2.58 

d) Lead (Pb : 99%) Scrap/ Shots/ 

Wires/ Powder in cored wire 

1.60 

e) Ferro Molybdenum (Mo : 65%) 

OR 

1.58 

e) Molybdenum Oxide (Mo : 60%) 1.89 

f) Ferro Titanium (Ti : 70%) 2.43 

g) Ferro Tungsten (W : 75%) 1.38 

h) Any other Nobel/ Special Ferroalloys 

(Ferro Vanadium, Ferro 

Boron, Ferro Phosphorous, etc.) 

1.38

I) Any other Metal (not present in 

aforesaid ferro-alloys) in 

unwrought or wrought form or in 

powder form or powders in cored 

wires 

1.04 

j) Sulphur stick / Sulphur powder in 2.00 

cored wire 

3 Consumables / Missc. Inputs : In kgs 

a) Ferro-Silicon (Si : 75%) (for deoxidation/ 

Reduction) 

20 

b) Graphite Electrodes (For units 

with EAF Furnace only) 

4 

c) Relevant CI, Steel Rolls for Hot 

Rolling Mill/ Continuous Casting 

Machine (against export of rolled 

products only) 

0.6 

d) Relevant Copper lined Moulds, 

Copper Moulds/ Tubes for 

Continuous Casting (if export 

product is produced through 

Continuous Casting route with/ 

without further rolling) 

0.01 

e) Casting Powder 1 

f) Aluminium wires, Notched 

bars,scraps, shots, ingots, Dross, 

Powder in Cored Wire and Ferro 

Aluminium 

2 

g) CaSi Lumps, CaFe Lumps, 

Powder of CaFeAl, cafe, CaSi in 

Cored wire 

0.1 

h) Rolling Mill Oil, Hydraulic Oil, 

Lubricating Oil (against export of 

rolled products only) 

0.5 

I) Celox Inserts, Temperature Tips, 

Oxygen Probes, Sampler Probes, 

Sampler Tips 

0.1 

j) Relevant Shear Blades, Saw 

Blades 

0.01 

k) Oxygen Lance pipes, Submerged 

tuyers, Atmospheric 

injector 

0.1 

l) Calcium Carbide 0.5 

m) Low silica Calcined lime/ lime 

stone 

n) Refractories : 

C121 

100 

i) Relevant Shaped Refractories 

(Fired/Un-fired Bricks/Shapes) 

20 

ii) Relevant Monolithic 

Refractories (including 

Castables, ramming mass, 

gunning Mixes) 

4 

iii) Relevant Special Refractories 1 

i.e. C.C. refractory (Shrouds, 

Mono Block Stopper, SE 

Nozzles), Slide Gate refractory, 

Porous Plug, Zircon/ Zirconia 

Nozzles & Tundish Nozzles 

o) Calcined / Raw Petroleum coke 10

4 Enerhgy Soureces : 

a) Relevant fuel for electric Power 

for Steel making and Auxiliaries 


plant/ source only 

1000500 K. Cal 

b) Relevant Lubricant for captive 

power plant 

1 kg 

c) Relevant fuel for fuel fired reheating 

furnace (if & only if 

export product is supplied in 

rolled condition) 

261000 K. Cal 

d) Relevant fuel for electric power 


(if & only if export product is 

supplied in rolled condition) 

217500 K. Cal 

e) Relevant fuel for ladle / tundish / 

ferro-alloy heating 

35000 K. Cal 

f) Relevant fuel for Boilers for 

VOD (to units having VOD 

facilities only) 

130500 K. Cal 

Note: 1. This norm is applicable for export product manufactured adopting Electric Furnace/ Electric 

Induction Furnace using Non-alloy Steel Melting Scrap as the basic input. 

Note: 2. The total quantity of imported inputs allowed against Sl.No. 1 (a) and Sl No. 2 shall be limited to 

1115 kg. Further, individual quantity of Pig Iron and Sponge Iron/ HBI allowed against Sl. No. 1(a), if 

any, shall not exceed 20% and 65% respectively of the total quantity of items to be permitted therein. 

Note: 3. Quantities of Ferro Alloys/Metals/Compounds have been worked out based on a specified 

percentage of alloying element in the Ferro Alloys/Metals/Compounds as indicated therein within the 

parenthesis against each alloy. If the percentage of alloying element in the ferro-alloy is higher/lower, the 

revised (i.e lower / higher) quantity may be worked out on pro-rata basis as under: 

Quantity permitted in norm x % of element in ferroalloy/metal/compound as per the norm 

Actual % of element in the imported ferroalloy/metal/compound 

Note: 4. For a given alloying element in steel, wherever two alternate ferroalloy / metals / compound of the 

same alloying element have been permitted and it is proposed to import a combination of both, individual 

quantities of each ferro-alloy may be worked out based on the specified (part) quantities of the alloying 

element in two forms (but within the overall quantity of alloying element in the steel), using the content 

based formula given therein. 

Note: 5. Alloying elements (s) in steel is/are prescribed by specifying the minimum value or a range or the 

maximum value. For calculating the quantities of ferro alloys/ metals/ compounds as per the content 

based formula given in the SION, the prescribed minimum or the mid value of the range or 0.8 times the 

maximum value of the respective alloying element (s) in the export product shall be taken into 

consideration. 

Note: 6. Import of Stainless Steel Melting Scrap of Known chemical composition may be permitted within 

the overall quantity of item No. 1 (a) but upto 90% to Induction Furnace units having AOD/VOD facilities 

and Electric Furnace units. For units having Induction Furnaces without AOD/VOD, import of stainless 

steel melting scrap will however, be permitted within the overall quantity of item No. 1(a) but upto 60% 

only. Only such grade of Stainless Steel Melting Scrap will be allowed that is relevant to the export 

product. In such a case, quantity of respective ferroalloy/metal to be allowed as per formula at Sl. No. 2 

will have to be reduced to account for the recoverable alloying element (s) (Nickel, Copper, Chromium and 

Vanadium) present in the stainless steel scrap. The reduced quantity of these ferroalloys/metals shall be 

obtained by deducting the equivalent quantity of ferroalloy/metal to be obtained using the following 

formula from the total quantity to be worked out as per formula at Sl. No. 2 in the SION read with Note 3: 

C122

Alloy Steel Scrap Quantity (kg) x % of relevant element in scrap 

1.115 x % of relevant element in ferroalloy / metal / compound 

Note 7: The specified quantities of energy sources/ fuel for electric power generation(in K.Cal) against 

import item 4(a) & 4(c) which correspond to electric power consumption of 500 and 100 KWH per tonne 

of export product have been allowed assuming that Captive Power Plant (CPP)/Source of matching 

capacity exist. In case CPP/source in a given unit is of lower capacity, quantity of fuel to be allowed for 

import will be reduced on pro rata basis. 

Note 8: Quantity of energy sources/ fuels (in K.Cal) correspond to a fuel having unit heat value of 8700 

K.Cal. Import of any other fuel of higher/lower unit heat value (as long as it is relevant to the facilities 

installed in the unit) may be permitted, quantity of which (in Kgs./ Cubic Meters/ K. Liters) may be 

worked out by dividing the K.Cal figures given in the SION by the actual unit heat value of the imported 

fuel. 

Note 9 : Import of items at Sl.No. 3(b), (c), (d), (i), CC Refractories under 3(n) (iii) and 4(c) shall not be 

permitted against export of steel ingots. 

Note 10 : The Item “Low Carbon Ferro Chrome” under 2(b) above is to be allowed only to 

manufacturers not having Argon Oxygen Decarburization (AOD) and Vacuum Oxygen decarburization 

(VOD) . However, this input may be allowed @ 80 kg (max) to units with only VOD facilities and @10 Kgs 

(max) to units with only AOD facilities. 

C526 Cold Rolled Stainless 

Steel Plates/Sheets/hoops 

& Strips/ Wide 

Coils/Circles. 

1000 kgs 1 HRSS Wide Coils / Strips of 

relevant grade 

1075 kg 

2 PVC Film (with glue) As per packing 

Policy 

3 Relevant Steel Shots (only 

against export product in short 

blasted condition) 

5 kg 

4 Kraft Inter-leaving Paper As per packing 

Policy 

5 Ditamacous Earth 0.4 kg 

6 Relevant CI / Steel Rolls for Cold 

Rolling Mill 

7 Furnace Oil or other Relevant 

Fuel for electric power for CRM 

& Auxiliaries (for units with 

Captive Power plant/Source 

only) 

8 LPG or other Relevant fuel for 

annealing furnace (against export 

of annealed products only) 

C123 

0.6 kg 

140 kg Furnace Oil 

OR 1218000 K. Cal 

other relevant fuel (s) 

60 kg LPG OR 

624000 K. Cal other 

relevant fuel (s) 

Note 1 : Import of energy sources / fuel(s) as at Sl. No. 7 & 8 of the import list may be permitted provided 

the fuel is relevant to the installed facilities in a given unit. Quantity of such fuel (in Kgs./ cubic meters/ 

K.liters) other than Furnace oil & LPGs may be worked out by dividing the specified K. Cal figures given 

in the SION by the actual unit heat value of the imported fuel. 

Note 2 : The specified quantity of energy sources (in K.Cal) for electic power generation for cold rolling 

mill, which corresponds to 600 KWH/tonne of export product, have been allowed assuming captive power 

plant/source of at-least matching capacity exist. In case, the CPP/ source in a given unit is of lower 

capacity, quantity of fuel to be allowed for import will be reduced on pro rata basis. 

Note 3 : In case the export product is Circle/circular blanks punched out from CR Stainless Steel

Sheets/Strips/Wide coils, the quantities of imported inputs will increase which may be obtained by 

multiplying the given quantities by a factor of 1.16. 

C527 Stainless Steel 

Wires/Ribbon. 

1000 kgs 1 a) Stainless Steel Wire Rods 

OR 

1060 kgs 

1 b) Stainless Steel Wire of dia 1.2 

mm and above for redrawing of 

thinner wire of dia 1 mm and 

below. 

OR 

1020 kgs. 

1 c) Stainless Steel Wire of dia 0.7 

mm and above for redrawing of 

thinner wire of dia 0.25 mm and 

below. 

1020 kgs. 

2 Dry Drawing Lubricant/ coating 9 Kgs 

3 Wire Drawing Soap 8 Kgs 

4 Tungston Carbide Dies 1 No 

5 Wet Drawing Lubricant/ coating 4 Kgs 

6 Diamond or Blanks/ Compax 

dies 

7 (a) Used/ New Plastics/ Steel 

Bobbins/ Spools 

OR 

(b) ABS/ Polystrene for making 

Plastics Bobbings/ Spools 

C124 

4 Nos 

300 Nos 

8 Inconel Pipes/ Tubes 2 kgs. 

1.05 kg/kg content of 

Plastic Bobbins/ 

Spools in the export 

product 

Note No.1. Import of items at Sl. No. (5) (6) & (7) shall be allowed against export of stainless steel wires of 

size below 1.6 mm only. 

C528 Steel Earthing Wire 1 kg 1 Non-Alloy Steel Wire Rod 1.00 kg 

(Gavanized) 2 Zinc 0.04 kg 

C529 Deleted. 

C530 1"Flexible Tubing 1 kg 1 Low carbon M.S. defective 

sheets/ coils 

C531 1/2" Flexible Tubings 1 kg 1 Low carbon M.S. defective 

sheets/ coils 

C532 1/2" to 3" Galvanised 

Flexible Conduits 

C533 2" Bungs with or without 

Washer/Gasket 

C534 2" Flanges with or 

without Washer/Gasket 

C535 2" Galvanised flanges 

with rubber gaskets 

1.05 kg 

1.047 kg 

1 kg 1 Low Carbon M.S. Defective 

Sheets/ Coils 

1.052 kg 


1 No 1 Hot/Cold Rolled Steel 

Sheet/Coil/Strip 

2 Gaskets 

OR 

Gasket Tube of relevant length 


Sheet/Coil/strip 

2 Gaskets 

OR 


1.4696 kg/ kg wt. of 

steel in export 

Net to Net 

Net +2% wastage 

2.10 Kg /kg wt of 

steel 

Net to net 


1 HR/CR Sheets/ Coils/ Strips 2.10 Kg/Kg wt. of 

steel (ungalvanised)in 


2 Synthetic rubber namely 

SBR/PBR/Nitrile/EPDM 

0.700 Kg/Kg wt of 

Gasket in the export 

product

C536 2" Galvanised/ Zinc 

Coated Bungs 

C537 2" Galvanised/Zinc 

coated Flange 

C538 2"Galvanised Bungs with 

rubber Gasket 

C539 3/4" Bungs with or 


C540 3/4" Flanges with or 


3 Zinc 0.04 Kg /Kg wt. of 

steel in the export 

product 

4 Resistant Laquer 1.42 kg/kg content in 




2 Plastic Gasket 

OR 

LDPE Granules 

OR 


C125 

1.4696 kg/ kg wt of 

steel (Ungalvanised) 

in export 

Net to net 

1.05 kg/kg weight of 

Gasket 

Net+2% wastage 

3 Zinc Ingot 0.04 kg/kg of steel in 

export 





2 Gaskets 

OR 


2.10 kg/kg wt of steel 

(Ungalvanised) in the 


Net to net 

Net+2% wastage 

3 Zinc Ingot 0.04 kg/kg wt. of 




1 HR/CR Sheets/Coils/Strips 1.4696 Kg/kg wt. of 

steel (ungalvanised) 


2 Relevant Synthetic rubber, 

namely SBR/PBR/Nitrile/EPDM 

0.700 Kg/kg wt. of 


product 

3 Zinc 0.04 Kg/Kg wt. of 


product 





2 Gaskets 

OR 




2 Gaskets 

OR 


C541 3/4" Flexible Tubings 1 kg 1 Low carbon M.S. defective 

sheets/ coils 

C542 3/4" Galvanised bungs 


1.8 kg /kg wt of steel 

(ungalvanised) in 

export 

Net to net 

Net+2%wastage 

1.776 kg/kg wt of 


Net to Net 

Net+2%wastage 

1.0471 kg 

1 HR/CR Sheets/Coils/Strips 1.8 Kg/kg wt. of steel 

(ungalvanised) in the 


2 Synthetic rubber, namely 




product 



product

C543 3/4" Galvanised flanges 


C544 3/4" Galvanised Zinc 

coated Bungs 

C545 3/4" Galvanised/ Zinc 

coated Flanges 

C546 Adjustable Bracket 

(Galvanised) 

C547 Wood to steel adapter, all 

types. 

C548 Airconditioner (All Types 

excluding Split Air 

Conditioner) 



1 HR/CR Sheets/Coils/Strips 1.776 Kg/kg wt. of 

steel (ungalvanised) 


2 Synthetic rubber, namely 


C126 


Gaskets in the export 

product 



product 



1 Kg 1 Hot/Cold Rolled steel 

sheet/coil/strip. 

1.8 Kg/Kg of steel 

(ungalvanised) in 

export 

2 Zinc 0.04 Kg/Kg content 

of steel in export 

3 Gasket 

OR 

Net to net 

Gasket Tube of relevant length Net+2%wastage 



2 Gaskets 

OR 


1.776kg/ kg wt of 

steel (ungalvanised)in 

export 

Net to net 

Net+2%wastage 

3 Zinc Ingot 0.04 kg /kg of steel in 

export 



1 kg. 1 Hot Rolled MS Sheet/ Strips/ 

Coils 

1.026 kg 

2 Zinc 0.040 kg 


Coils 

1.060 kg 

2 Zinc 0.040 kg 

1 No. 1 Compressor 1 No. 

2 Grill Assembly Net to net 

3 Copper Tube of relevant size Net content + 1% 

wastage 

4 Fractional HP Motor 1 No. 

5 Louver Motor (Synchronous 

motor) 

Net to net 

6 Capacitor of relevant 

specification 

1 No. 

7 Copper Capillary of relevant size 1 No. 

8 Thermostate 1 No. 

9 Propeller (Fan) 1 No. 

10 Blower 1 No. 

11 Switch 1 No. 

12 Main Cord of relevant 

specification 

13 Mild Steel/Galvanised Steel in 

Sheet/Coil form 

1 No. 

Net content + 5% 

wastage.

C549 Anchor Bolt with Nut 

14 Aluminium Sheet/Foil Net content + 2% 

wastage. 

15 Powder Paint 0.5% of FOB 

16 Eco-Friendly Refrigerant Gas Net to net 

1 kg 1 Non Alloy Steel Round 

OR 

1 Non Alloy Steel Wire Rods / 

Rounds in Coils 

OR 

C127 





1 Non Alloy Steel Billets 1.15 kg/kg content in 


Note : 1. If the export product is painted, in addition relevant paint may be allowed to the extent of 4% of 

the FOB value. 

C550 Animal Drawn Ploughs/ 

Parts Thereof 

C551 Arm Blade (Galvanised) 

C552 Aruvil Double Wheel 

Carrier kit Set 

(Galvanised) 

1.000 kg 1 Non-Alloy Steel Round/ Billets 1.200 kg/kg content 

in exports 

2 LDPE Bitumenised Paper, Card 

Board 

1.05 kg 


Coils 

1.219 kg 

2 Zinc 0.040 kg 

1 kg. 1 Mild Steel HR Sheets/ Strips/ 

Coils 

0.551 kg 

2 Mild Steel CR Sheets/ Strips/ 

Coils 

0.157 kg 

3 Zinc 0.040 kg 

C553 Automatic Thimble 1 No. 1 Kontratherm Disc 2 Nos. 

C554 Axes made of Steel 1 kg 1 Non-Alloy Steel Round/ Billets 1.250 kg/kg content 

in export 

C555 Deleted 

C556 Deleted 

C557 Deleted 

C558 Ball Chain Cap 1 kg. 1 Pig Iron 0.970 kg 

(Galvanised) 2 Zinc 0.040 kg 

C559 Ball Pen Steel Refills 

C560 Barb Arm (Galvanised) 

C561 Barb Arm Base 

C562 Bearing Races (Turned 

Inner and Outer) 

1 kg. 1 Brass scrap 1.075 kg 

2 Steel Balls 1.020 Nos 


Coils 

1.15 kg 

2 Zinc 

OR 

0.040 kg 

1 G.P. Sheet/Strips/Coils 1.15 kg 

1 kg. 1 Pig Iron 0.970 kg 

2 Zinc 0.030 kg 

1 Kg 1 Ball Bearing Grade Steel Tube 

(SAE 52100) 

OR 

Ball Bearing Grade Steel Bar 

(SAE 52100) 


Super Precision Fibre Cage 

Bearing, Grinding Spindle and 

Grinding Wheel 

1.15 kgs 

1.30 kgs 



C563 Bell Metal utensils 1 kg Bell metal scrap 1.030 kg

C564 Bimetallic Type Spark 

Plug 

2 Lakh Nos. A. RAW MATERIALS: 

1 Calcite Powder 144.50 kgs 

2 Calcined Alumina 3701.86 Kgs 

3 Steiron Talc 31.50 Kgs 

4 Green Pigment 0.62 Kg 

5 Active Bentonite 0.40 Kg 

6 Adhesive 2.00 Kgs 

7 Dextrin 0.40 Kg 

8 Fusing Glass 50.80 Kgs 

9 Carbonyl Iron Powder 36.36 Kgs 

10 Melt Mullite 20.00 Kgs 

11 Fine Graphite Powder 10.98 Kgs 

12 Inscription Script Green 0.40 Kg 

13 Nickel Alloy Round/Profile Wire 90.64 Kgs 

14 Nickel Squares/Anodes 34.00 Kgs 

15 Nickel Sulphate 112.00 Kgs 

C128 

B. COMPONENTS: 

1 Bi-Metal Electrode Net to Net 

2 Electrode Shank Net to net. 

3 Washer/Gasket Net to net. 

4 Sealing Washer Net to net. 

5 Terminal Cap/Nut Net to net. 

6 Sealing Washer/Ring Net to net. 

7 Housing 

OR 

Net to Net. 

Cold Heading/ Extruding/ 

Forging Steel Rounds/ Bars/ 

Coils and Rods of Dia 13 mm to 

19.6 mm 

9178.33 kgs 

8 Insulator 1 No./ unit (Net to 

net) 

9 Resister 1 No./ unit (Net to 

net) 

10 Spring 1 No./ unit (Net to 

net) 

C. MISC. ITEMS: Upto 2% of FOB 


1 Molykote "G" Rapid Spray 

2 Silver Anode 

3 Silver 1M Salt 

4 Special HSS Drills 

5 Inscription Strips 

6 Grinding Mandrels 

7 Thread Chasers/Thread Rolling 

Jaws 

8 Electrode Disc Blanks 

9 Grinding Wheels

10 Inscription Ring 

11 Pressing Pins 

12 Stamp Head 

13 Welding Electrodes 

14 Form Sinkers 

15 Carbide Tips/Inserts/Ceramic 

Inserts 

16 Punches 

17 Shear Blade 

18 Sillment Powder (198 kgs) 

19 Activator (9.9 kg) 

20 Epoxy Resin (26 kg) 

Import item viz insulator mentioned at Sl. No. 8 of Components shall be allowed for import in lieu of 

import items at Sl. No. 1 to 12 of Raw Material. 

C565 Deleted 

C566 Galvanised Welded steel 

Pipes/ Tubes 

1 kg. 1 Pig Iron 

OR 

C129 

Hot Melting Scrap 

OR 

1.356 kg 

1.287 kg 

Steel Skulls 1.519 kg 

2 Zinc 0.040 kg 

C567 Bolt Axle (Galvanised) 1 kg. 1 MS Round 1.094 kg 

made of Steel. 2 Zinc 0.040 kg 

C568 Bolts & Nuts made of 

CHQ Steel 

C569 Bolts (Galvanisded) 

1 kg 1 CHQ Grade Non-Alloy Steel 

Round/Wire Rod 

1 kg 1 MS Round/Rods 

OR 

MS Billets 

OR 

MS Billets Cuttings/Re-Rollable 

Scrap 

1.165 kg 

1.18 kg 

1.2390 kgs. 

1.2626 kgs. 

2 Zinc 0.040 kg 

C570 Bolts/screws made of steel 1 kg 1 Alloy/ Non-Alloy Steel Rounds/ 

Wire Rods/Bars/Rods 


in export 

If the export product is painted/coated in addition relevant Paint/ Coating Powder may be allowed to the 

extent of 4% of the FOB value. 

C571 Bolts/screws made of steel 

Electroplated 

C572 Bolts/screws made of steel 

galvanised 

C573 Bottom, Top Cover of 

Round Battery Jacket 

made of Tin plate. 

C574 Boulevard Clamp 

(Galvanised) 

1 kg 1 Alloy/ Non-Alloy Steel Rounds/ 

Wire Rods 


in export 

2 Nickel 0.0097 kg/ kg of 


1 kg 1 Alloy/ Non-Alloy Steel Rounds/ 

Wire Rods 


in export 

2 Zinc 0.04 kg/ kg of export 

product 

1 kg 1 Electrolytic Tin Plate Prime 1.25 kg 


Coils 

1.01 kg 

2 Zinc 0.040 kg

C575 Box Girders for Bridges 

(Galvanised) 

C576 Box Hinge (Galvanised) 

C577 Brace Band (Galvanised) 

C578 Brace Rail End 

(Galvanised) 

1 MT 1 Steel Plates 50B grade 

confirming to BS 4360 

C130 

1.5 MT 

2 Zinc 0.040 kg 


Coils 

0.602 kg 

2 Mild Steel Rounds 0.569 kg 

3 Zinc 0.040 kg 


Coils 

0.993 kg 

2 Zinc 0.040 kg 

1 kg. 1 Cold Rolled MS Sheets/ Strips/ 

Coils 

0.884 kg 

2 MS Plate 0.354 kg 

3 Zinc 0.040kg 

C579 Brace Rail End 1 kg. 1 Pig Iron 0.970 kg 

(Galvanised) 2 Zinc 0.040 kg 

C580 Brass Builder Hardware 1 kg 1 Brass scrap 1.11 kg/kg content in 


C581 Brass caps for dry cells 

batteries 

C582 Brass Cup or Cup, Bullet, 

Jacket of Copper Alloy 

for Defence application 

1 kg 1 Brass scrap 1.075 kg 

1 Kg. 1 Copper Cathodes/Copper 1.10 kg/kg content in 

Ingots/Copper Wire Bars/ Copper the export product 

Rods 

OR 

1 Copper Scrap 1.12 kg/kg content in 


2 Zinc 1.10 kg/kg content in 


3 Graphite Plate * 

4 Morcem cement ** 

Note: * 1 set of two plates for 7 MT of export product will be allowed 

** 1 Kg per 175 Kg of export product will be allowed. 

C583 Brass Tubes 

1 MT 1 Brass Scrap 1.12 MT 

2 Drawing Dies Upto 5% of FOB 


C584 Brass valves 1 kg 1 Brass Scrap 1.075 kg 

C585 Bronze utensils 1 kg 1 Bronze scrap 1.030 kg 

C586 Bull Dog Hinge 1 kg. 1 Mild Steel HR Sheets/ Strips/ 

Coils 

0.602 kg 


C587 Bushing Reverse Ball 

Valve made of 

Aluminium Alloy ( Grade 

AA 2011T3) ( Motor 

Vehicle Part) 

C588 Bushing Third Ball Valve 

made of Aluminium Alloy 

(Grade AA 2011T3) 

(Motor Vehicle Part) 

3 Zinc 0.040 kg 

1 MT 1 Aluminium Alloy Rod (Grade 

AA2011T3 dia 20mm). 

2 Tools namely Collet, Guide 

Bush, Carbide Form 

Cutter(HOB), Carbide 

Drill/Twist Drill 

1 MT 1 Aluminium Alloy Rod (Grade 

AA2011T3 Ddia 20mm) 

2 Tools namely Collet, Guide 

Bush, Carbide Form 

Cutter(HOB), Carbide 








value of exports.

C589 Epoxy Polyester Powder 

coated Cabinet made of 

CRCA Non-Alloy Steel 

Sheets OR Cabinets made 

of CRCA Non-Alloy Steel 

Sheets other than Epoxy 

Polyester Powder Coated. 

C131 

Drill/Twist Drill 

1 kg 1 Mild Steel CRCA Sheets/ 


secondary 



2 6 Leverlock with dead locking 

Mechanism (relevant) 

1 No. (net to net) 

3 Round Spindle Handle (relevant) 1 No. (Net to net) 

4 3 Ply Carton (As per packing 

policy) 

5 ULF Slides 428mm long @ 2 

Nos./drawer. 

Net to net. 

6 Cam Lock Brass No./Cabinet. Net to net 

7 Epoxy Polyester Powder. 6% of FOB value. 

The import of Epoxy Polyester powder shall be allowed only for caninets coated with this powder. 

C590 Cable Ties made of 


1 kg 1 Stainless Steel Strips /Coils of 

AISI 304Grade 

1.25 Kg 

C591 Cantilever Gate Roller 1 No. 1 Non-Alloy Steel Round/ Billets 1.320 kg 

(Galvanised) 

2 Mild Steel HR Sheet/Strips/Coil 1.10 kg/kg content in 

export 

3 Mild Steel Rounds 1.05 kg/kg content in 

export 

4 Pig Iron 1.10 kg/kg content in 

export 

5 Zinc Upto 2% of weight of 

export 

6 Bearing Net to Net 

C592 Capseal made out of Tin 

Plate Waste/Waste or Tin 

Free Steel 

C593 Carbon Steel Submerged 

Arc Welded Pipes as per 

API Grade/ ASTM Grade 

or equivalent 

OR 

Hot Formed Steel Bends 

as per API, ASTM Grade 

or euivalent grade 

Degree: 0-180 Degree 

1 No. 1 Tin Plate Waste/ Waste OR Tin 

Free Steel. 



1 MT 1 Non-Alloy HR Coils/Plates 1.05 MT/MT content 


2 Welding Flux 5.0 Kg 

3 Welding Wire 4.13 Kg 

4 Grinding Wheel 0.2 No. 

5 Oil & Lubricants 1.5 Litres 

6 Cutting Oil 0.5 Kg 

7 CO2 Wire 0.8 Kg 

8 Rust Preventing Oil 0.1 Kg 

9 X-Ray Film 1 Sheet 

Note: 1. The total CIF Value of all items appearing at Sl.Nos 2 & 4 to 9 shall not exceed 3% of FOB Value 

of export. 

2. An additional item X-Ray tube will be allowed for order of pipes above 25,000 MT 

C594 Carbon/ Alloy Steel 

Seamless Tubes (Cold 

Finished) 

C595 Ceramic Coated Steel 

Pipes With or Without 

1 MT 1 Carbon/ Alloy Steel Rounds/ 

Bars/ Billets 

OR 

Carbon Steel Seamless mother 

pipes (hot finish) 

1 kg 1 CR/HR Coil in Prime/Second 

condition 

1.44 MT 

1.20 MT 

1.05 Kg/kg content in 

export. 

couplings 2 Micro Silica 1.05 Kg/Kg content 

in export.

3 Aimina Cement 1.05 Kg/Kg content 

in export Product 

C596 Cl Cistern 1 kg 1 Pig Iron 1.100 kg 

C597 Cl Pipes and Fittings 1 MT 1 Major Input comprising of Pig 


Scrap 

1100 kg 


Below 15%) 

110 kg 


& FeMn: 

5 kg 

4 Other inputs comprising of CIF value of all these 

Fireclay and Fired silica items taken together 

Refractory (Bricks/ Mass), restricted to 1% of 

Grinding Wheel and Black FOB value of 


exports. 

5 Packing Material (MS Round As per packing 


stuffing) 

Policy. 



C598 CLEVIS 1 kg 1 MS Flats/Plates 1.100 kg/kg content 

in export. 

C599 Clips for Railways - 1 MT 

Elastic Rail clips, pendrol 

clips, E. Clips and G- 

Clips. 

1 

2 

Alloy Steel Rounds/Rods 

OR 

Alloy Steel Billets 

Misc. Items such as Cutting 

Tools, Grinding Wheels, 

Refractory Material, Lubricating 

Oil, Anti- Rust Oil, Paints, 

Quenching Oil, Heat Treatment 

chemicals 

1.15 MT 

1.20 MT 



C600 Coil Spring 1 kg 1 M.S. wire rod 1.067 kg 

C601 Cold Rolled Steel Tubes 

for Furniture 

1 MT 1 Cold Rolled Non-alloy Steel 

Sheet/ Strip/ Wire Coils (prime 

seconds/ defectives) 

1.05 MT 

C602 Cold Rolled Precision 

Steel Tubes 

1 MT 1 CR Steel Coils/ Sheets in Prime 1.05 MT 

C603 Machined/ Cold 

Rolled/Cold Formed 

rings for bearing races, 

CV cages 

1 MT 1 

1 

Alloy/Non-Alloy Steel 

Round/Billets/Bars 

OR 

Seamless Steel Tubes 

1.998 MT 

1.57 MT 

C604 Collar 


Coils 

1.028 kg 

2 Zinc 0.060 kg 

C605 Components of Electric 

Teeth Plaque removing 

Brush: 

Drive Gear 

Please see Note below C-608 



Brush: 

Satelite Gear 


1 Kg 1 Stainless Steel Rod/Coil Dia 2.4 

mm to 4.8 mm (AISI 416) 

1 Kg 1 Stainless Steel Rod/Coil Dia 2.4 

mm to 4.8 mm (AISI 416) 

C132 

6.0 Kgs 

C607 Components of Electric 1 Kg 1 Stainless Steel Strips/Coil upto 5 Kgs 

5 kg


Brush: 

Rack 




Brush: Rack Pin/Pin (Big 

& small). 

C133 

1.5 mm thick (AISI 416 T) 

1 Kg 1 Stainless Steel Rods/Coil upto 

1.5mm thick (AISI 416 T). 

Note: In respect of norms covered by Sl.Nos. 605 to 608 : above Relevant consumables in the form of 

Chemicals IA/IM/IC Solution of cutting tools (a) Collet for automat (b) Guide bush (c) Carbide form 

cutter (HOBB) and (d) Carbide drill and twist drill will be allowed upto 20% of the FOB Value. 

C609 Components of 

Electronic Home plaque 

removing instruments: 

Drive Gear 

C610 Components of Steel 

Drum namely Body 

Sheets/ Circles made of 

CRCA 

C611 Copper Bottom Stainless 

Steel Kitchenwares 

1 Kg 1 Stainless Steel Rod 2.4 mm to 

4.8 mm 

2 Misc. items in the form of 

chemicals IA/IM/IC solution and 

cutting tools (a) Collet for 

Automat (b) Guide Bush (c) 

Carbide form cutter (Hobb) and 

(d) Carbide drill & Twist Drill 

2 kg 

4.9 Kgs 

CIF Value limited to 

20% of FOB value. 

1 MT 1 CRCA Steel Coils 1.05 MT/MT content 

of CRCA Steel in 


1 kg 1 CR Stainless Steel Sheets/Coils 

AISI 304 



product 

2 Copper Ingot/Rods 1.02 kg/kg of net 


product 

C612 Copper utensils 1 kg 1 Copper scrap 1.020 kg 

C613 Corner Arm (Galvanised) 1 kg. 1 Mild Steel HR Sheets/ Strips/ 

Coils 

1.921 kg 


C614 Crank Drive of 

Cryogenic Pumps 

3 Zinc 0.040 kg 

1 No. 1 Needle Bearing MR 48 SS Bore 

76.2 MM 

Net to net. 

2 Needle Bearing MR 22 SS Bore 

34.8 MM 

Net to net. 

3 Roller Bearing NUP 308 Bore 40 Net to net. 

MM WT-725 Gms.+/-10% 

tolerance limit 

4 DU Bush 48 DU 72 Net to net. 

5 DU Bush PAP 4030 Net to net. 

6 Vari Seal Net to net. 

7 SS H.T. Bolts Net to net. 

8 Spring Washer Net to net. 

9 Nolos Rings Net to net. 

C615 CRCA Butt Hinges 1 kg 1 CRCA sheet/coil 1.0823 kg 

C616 CRCA Ghamellas 

with/without handle 

made of CRCA 

Sheet/M.S. Wire Rod 

1 MT 1 CRCA Sheet of relevant gauge 1.16 kg/kg content in 


2 M.S. Wire Rod of relevant 

diameter 


export product.

C617 CRCA Hinges Electric 

Brass plated 

C618 CRCA Hinges self colour 

C619 CRCA Hinges Zinc 

plated 

C620 Crow Bar / Wrecking 

Bar 

C621 Crowns made of Tin free 

steel/ Tin Plate Prime 

with dry blend lining 

Printed 

C622 Cultivator 

C623 Cupboard made of 

CRCA Sheets 

C624 Cut Hand tacks made of 

M.S. Sheets 

C625 Decorative 

Handicrafts/Artwares 

made of Anodised 

Aluminium 

C626 Dimmer Stat 

continuously variable 

voltage auto transformer 

(copper wound) - 

Portable types 

C627 Dissolved Acetylene Gas 

Cylinder 

1 kg 1 CRCA Sheet/Coil 1.08 Kg/Kg. content 


2 Low Carbon Wire Rod. 1.02 Kg/Kg. content 


3 Nickel. 0.097 Kg/Kg. content 

of steel in export 

Product 

4 Brass Scrap 0.02 Kg/Kg. of steel 


product. 

1 kg 1 CRCA Sheet/coil 1.08 Kg/Kg. content 


2 Low Carbon Wire Rod 1.02 Kg/Kg. content 


1 kg 1 CRCA Sheet/coil 1.08 Kg./Kg. content 


2 Low Carbon Wire Rod 1.02 Kg./Kg. content 


3 Zinc Upto 4% of net 

weight of steel in the 


1.0 kg 

Content of 

Import Item 

1 Non-Alloy Steel Round/ Billets 1.100 kg 

1 kg 1 Tin Free Steel/Tin Plate Prime 1.22 kg/kg content in 

export. 

1 kg MS Flat 

Plate content 

1 kg content 

of import 

item 

2 PVC Compound or PVC Free 

Compound 

3 Printing Ink, Coating Lacquer, 

Varnish 

1 MS Flat/plate 1.07 kg 

2 MS Round 1.05 kg 

3 MS Plates 1.11 kg 

1 Mild Steel CRCA Sheets/ 


secondary 

1.0 Kgs 1 M.S. Second/ Defective /Sheets/ 

Coils/ Strips 

C134 


export. 

0.065 Ltr. 

1.05 kg 

1.05 Kg 

1 kg 1 Aluminium Ingot 1.05 kg 

2 Dyes for Anodising 1% of FOB value 

1 No. 1 CRGO Steel Sheets 1.02 kg/kg content in 

export 

1 No. 1 HRMS Sheets 4 mm OR 

Seamless Steel Tubes. 

2 Asbestos Net to net 

3 Calite Net to net 

1.10 Kg./Kg. content 

in export OR 

q.p2Kg/Kg content in 

the export product.

C628 Divider Valves (Metering 

Device) 

4 Acetone 1.05 Kg/Kg content 

in export 

5 Primer paint 

6 Marron Paint 

7 Valve (Brass) Net to Net 

8 Valve (Guard) Net to Net 

9 Neck Ring Net to Net 

10 Fuisible Plug Net to Net 

1 No. 1 U-Cup Seal Net to net. 

2 Polyurethene-O-Ring Net to net. 

3 Drawn Steel Bars/ Section Free 

Cutting Steel with Leaded ENIA 

C629 Domestic utensils (Brass) 1 kg 1 Brass 1.030 kg 

C630 Door/ Window/ ventilator 

Sections 

C631 Double Carrier Wheel 

C632 Dowel Pin made out of 

CHQ Alloy steel/ 


C633 Drag Link Chain 1 kg content 

of Import 

Item 

C634 Drive Rod made of 

Stainless Steel (Part of 

Dental Instrument) 

C635 Ductile Iron Spun Pipes 

C135 


export. 

1 kg 1 M.S. Billets. 1.07 kg/Kg content in 



Coil 

0.348 kg 

2 Mild Steel CR Sheets/ Strips/ 

Coils 

0.135 kg 

3 MS Rounds 0.170 kg 

4 Natural Rubber 0.477 kg 

5 Zinc 0.045 kg 

1 Kg 1 Relevant CHQ Alloy Steel/ 

Stainless Steel wire Rods in Coils 

or Bars 

1.7 Kgs 

2 Misc. items such as: Tool & Die 

Steel/Grinding Wheel/Threading 

Tapes 

1 Non-Alloy Round/ Billets 1.10 kg 


value 

1 MT 1 Stainless Steel Rod 1.10 MT/MT content 


1 MT 1 Pig Iron 0.96 MT 

2 Non Alloy Steel Melting Scrap. 0.24 MT 

3 Ferro Silicon 50 Kgs 

4 Pure Magnesium 3 kg 

5 Hard Coke 175 Kg 

6 Light Diesel Oil 156.5 ltrs 

7 Cement 91.8 Kgs 

8 Blacking Powder 0.5 Kg 

9 Mould Powder 1.8 Kg 

10 Zinc Wire 7.6 Kg 

11 Bitumen Solution 5.6 ltrs 

12 Inoculants 2.5 Kg 

13 High Alumina Refractory 20 Kgs

14 Gasket Net to net 

15 Lubricant Net to net. 

Note:- 1. Import of Cement is to be allowed only in case the export product is for "DI Pipes with Cement 

Mortar as inside lining. In case of DI Pipes withCement Mortar, the input quantities of other items 

covered by the list will be worked out based on export weight of DI Pipes minus the weight of Cement 

Mortar. 

Note : 2. Import of Gasket & Lubricants shall be on net to net basis with accountability and specification 

should match in import and export 

C636 Electrolytic Tinplate 

Components 

C637 Electronic 

Medical/Dental 

Instruments and Parts 

thereof: Motor Pinion 

ASI-416 

1 kg 1 Electrolytic Tinplate Prime MR 

Type 

1 kg 1 Stainless Steel Rod AISI-416 Dia 

4.0mm to 5.0mm 

2 Fine Copper Grits for Blasting on 

S.S. components 

3 Fine Brass Grits for Blasting on 

S.S. components 

4 Chemical for Deburring & 

Polishing 

5 Corrossion Protective Chemicals 

6 Carbide Form Cutter (HOB) 

C136 

1.05 kg 

4.2 kg 

7 Carbide Cutter Net to Net. 

8 Collect Net to net 

9 Guide Bush Net to net 

Note:- 1 Import item Nos. 2 to 6 are allowed in total Upto 2% of FOB value of export. 

C638 Element of Fuel Injection 

Equipment 

C639 Round/Eliptical /Oval 

Tin Plate container and/ 

or components thereof 

C640 End Clamp 

C641 Fabricated Steel 

Hardware/ 

Structure/Articles not 

elsewhere specified made 

out of Non Alloy/Alloy/ 


Plates/Sheets/Wide 

Coils/Strips 

C642 Female Hinge 

1 kg 1 Alloy Steel Bars/Coils Type SAE 3.43 Kg 

52100/Equivalent 

2 Misc. Items: Upto 2% of FOB 


a) Gun Drill 

b) Lapping Compound 

c) Honing Mandrels 

d) Solder Paste 

1 Kg 1 Electrolytic Tinplate waste/waste 1.15 Kgs 


Coils 

0.999 kg 

2 Zinc 0.075 kg 

1 kg 1 Non Alloy/Alloy/ Stainless Steel 

Plates/Sheets/Wide Coils/Strips 

2 Zinc Ingot (to be allowed only in 

case the product is Galvanised) 


Coils 

1.091 kg 

2 Zinc 0.060 kg 

C643 Fitting made out of Non- 1 MT 1 Non-Alloy Steel 1.25 MT 




export product

Alloy Steel (Galvanised) 

C644 Flange Plate 

C645 Flexible Channel/Drop 

Channel/Rigid Channel 

C646 Flexible Corrugated 

Stainless Steel Hose with 

Braidings of Stainless 

Steel Wire 

C647 Floor Flange 

C648 Floor Strainer/ Insect 

Stopper made of Stainless 

Steel 

C649 Folding/straight 

Umbrella (Auto and/or 

Manual) 

C650 Forged Eye Hoe (other 

than these covered by Sl 

No. 243 & 498) 

C651 Fork 

C137 

Rounds/Hexagons 

2 Zinc Metal 0.04 MT 


Coils 

1.060 kg 

2 Zinc 0.040 kg 

1 kg 1 CRCA Steel Sheet/Coil ;in 0.3 


0.658 kg 



and Zinc Oxide) 

0.01 kg 

1 MT 1 Stainless Steel Sheet/Coils 1.25 MT/MT content 


2 Stainless Steel Wire 1.10 MT/MT content 

in export. 


2 Zinc 0.030 kg 

1 kg 1 Stainless Steel Sheet - AISI-304 1.45 kg 

1 Dozen 1 Water Proof Umbrella Nylon 

Cloth 

2 Complete Umbrella Frames 

without handles & without cloth 

OR 

2 a) Umbrella Tube with accessories 

1.05 Sq. Yard/Sq. 

Yard content in 

export. 

1.0 Dozen 

i) Tube Fitted with Notch 1.01 Dozen 

ii) Up Runners with Ring 1.01 Dozen 

iii) Down Runners 1.01 Dozen 

iv) Hooks 1.01 Dozen 

v) Springs 1.01 Dozen 

vi) Cap 1.01 Dozen 

b) Umbrella Ribs 

i) Big Fluted with Centre Clip 1.01 Dozen 

ii) Small Fuluted 1.01 Dozen 

iii) Big Solid with Side Clip 1.01 Dozen 

iv) Small Solid 1.01 Dozen 

v) Eyelates 1.01 Dozen 

3 Umbrella Handles 1 Dozen 

4 Polyester Tape width less than 

2.5 Cms. 

2.4 Yards 

1 MT 1 Carbon Steel Plate 1.6 MT 


Coils 

1.097 kg 

2 Zinc 0.060 kg 

C652 Fork Digging with socket 1Kg. 1 Non-Alloy Steel Round/ Billets 2Kg/Kg content in 

the export product.

C653 Fountain Pen Nibs 

C654 Non Alloy / Alloy / 

Stainless Steel Fully 

Threaded Rods 

(Ungalvanized / 

Galvanized) 

C655 Galvanized Curb Stake 

C656 Gate Clip 

C657 Gate Hold Back 

C658 Gate Latch 

100 Pcs 1 Stainless Steel Strips 70.87 gms 

2 Iridium Alloy Pen Points 0.288 gms 

1 MT 1 Non Alloy / Alloy / Stainless 

Steel / Bars & Rods (including 

Rounds & Wire Rods) of relevant 

grade 

1.056 MT 

2 Zinc (against export of 

Glavanized Threaded Rods only) 

0.040 MT 

1 MT 1 Non-Alloy Steel Wire Rod 

(5.5mm to 20 mm dia) 

1.05 MT/MT 

2 Zinc 3% of net weight of 

Steel to be 

Galvanised. 


Coils 

0.998 kg 

2 Zinc 0.065 kg 


Coils 

1.223 kg 

2 Zinc 0.060 kg 


Coils 

1.045 kg 

2 Zinc 0.050 kg 

C659 German Silver Art-ware 1 Kg 1 Coper Scrap 1.05 kg/kg net 

contents of the 

material in the export 

product 

2 Zinc 1.05 kg/kg net 

contents of the 

material in the export 

product 

3 Nickel 1.05 kg/kg net 

contents 

C660 German silver utensils 1 kg 1 German silver 1.030 kg 

C661 Gun metal valves 1 kg 1 Gun metal scrap 1.075 kg 

C662 Half Metal Ball Pen 100 pcs 1 Ball pen cap 102 Pcs 

2 Ball Pen Barrel 102 Pcs 

C663 Hand Sewing needles 

C664 Hardened Twin Thread 

Bright Zinc plated clear 

Passivated Steel screws 

3 Mechanism 102 Pcs 

4 Pan Clips 102 Pcs 

5 Ball Pen Tip 102 Pcs 

6 Writing Inks 115 gms 

1 Kg 1 High Carbon Steel Wire 1.15 Kg/Kg content 

in export 

2 Nickel Anode/'S' Nickel 0.011 kg/1000 Nos. 

of the hand Sewing 

Needles 

1 kg 1 Cold Heading quality Aluminium 

Killed Steel Wire Rods 

C138 

1.165 Kg./Kg. 


2 Zinc 0.01 Kg./Kg. of 

export 


Sodium Cyanide 99.99% Pure, 

Thread Rolling Dies, Punches, 

Lubricating/Cutting Oil 

C665 Heavy Duty 9 Tons 1 kg MS 1 MS Rounds 1.10 kg 


FOB Value

Tillers (Spring loaded 

without spring cultivator) 

C666 Heavy duty Fork latch 

C667 Galvanised Non alloy/ 

Alloy Steel Wire Ropes 

(fibre core) 

Round 

content 

2 MS Plates 1.20 kg 

3 MS Angles 1.10 kg 


Coils 

1.060 kg 

2 Zinc 0.065 kg 

1000 kg 1 Ungalvanised Wire of relevant 1.02 kg/kg content in 

grade of steel with or without rust the export product. 

preventing coating like 

phosphating / greasing/waxing 

etc. 

2 Zinc 62 kg 

3 Sisal Core/ Sisal fibre 55 kg 

4 Anti Rust Petroleum Based 

Lubricant 

OR 

20 kg 

4 a) Anti Rust Wax 6 kg 

b) Anti Rust Lubricating Oil 14 kg 

5 Dry Drawing Lubricant/ Coating 8 kgs 

6 Tungsten Carbide Dies 5 Nos 

7 Lead (for patenting) 3.30 kg 

Note: 1. Items at Sl.No.5 to 7 shall not be allowed if the imported input is steel wire. 

2. In case of galvanised steel wire ropes for oil, fishing and shipping industry if the product is as per ASTM 

A 603-70, for Class B and Class C coatings, the item Zinc shall be allowed two times and three times 

respectively of the Zinc quantity permitted above. 

3. The CIF value of Lubricant shall not exceed 5% of FOB value. 

C668 Non alloy/ Alloy Steel 

Wire Ropes (fibre core) 

(Un-Galvanised) 

1000 kg 1 Ungalvanised Wire of relevant 

grade of steel with or without rust 



etc. 

1020 kg 

2 Sisal Core/ Sisal fibre 55 kg 



Lubricant 

OR 

20 kg 

4 a) Anti Rust Wax 6 kg 

b) Anti Rust Lubricating Oil 14 kgs 

5 Dry Drawing Lubricant/ Coating 8 kgs 


Note : 1. Items at 3, 5 & 6 shall not be allowed if the imported input is steel wire. 


C669 Non alloy/ Alloy Steel 

Wire Ropes (Steel Wire 

Core) 

1 MT 1 Ungalvanised Wire of relevant 

grade of steel with or without rust 



etc. 

1020 kg 


Lubricant 

OR 

20 kg 

2 a) Anti Rust Wax 6 kgs 

C139

) Anti Rust Lubricating Oil 14 Kgs 

3 Dry Drawing Lubricant/ Coating 8 Kgs 



Note : 1. Items at Sl.Nos. 3 to 5 shall not be allowed if the imported input is steel wire. 


C670 Galvanised Non alloy/ 

Alloy Steel Wire Ropes 

(Steel wire core) 

1000 kg 1 Ungalvanised Wire of relevant 1.02 kg/kg content in 

grade of steel with or without rust the export product. 



etc. 

2 Zinc 62 kgs 


Lubricant 

OR 

20 kg 

3 a) Anti Rust Wax 6 kgs 

b) Anti Rust Lubricating Oil 14 kgs 

4 Drawing Lubricant/ Coating 8 kgs 



Note : 1. Items at Sl.Nos. 3 to 5 shall not be allowed if the imported input is steel wire. 

2. In case of galvanised steel wire ropes for oil, fishing and shipping industry if the product is as per ASTM 

A 603-70, for Class B and Class C coatings, the item Zinc shall be allowed two times and three times 

respectively of the Zinc ingot quantity permitted above. 


C671 High Chromium 1 MT 1 Mild Steel Scrap 0.90 MT 

Grinding media Balls for 

Cement Grinding Mills 

(Composition: Cr.-16- 

2 

3 

HC Ferro Chrome 

Ferro Moly (Mo-75%) 

292 kg 

10 kg 

17%, Mo-0.6-0.7%, Si- 

0.6-0.7%, C-1.5-2.5%, 

Fe-Balance) 

4 Fero Silicone (Silicon 75%) 10 kg 

C672 High pressure Seamless 

Gas Cylinders 

C673 Hinges and parts thereof 

made of M.S. or Stainless 

1 Tonne 

(Weight of 

seamless 

Tube) 

1 Seamless Steel Tube of relevent 

grade 

2 Relevant Cylinder Valves 1 No. 

3 Relevant Nipples for Cylinder 

Valve 

1 kg 1 MS Sheet/Coil 

OR 

C140 



1 No. 

1.20 kg 

Steel Stainless Steel Sheet/Coil 1.20 kg 

C674 Hoe Welded Eye 1 kg carbon 1 Carbon Steel 1.20 kg 

a).Hoe Blade 

steel content 

b).Eye 2 MS pipe 1.05 kg 

C675 Hose Assemblies with 

End Metal Fittings 

C676 Hot Dipped Galvanised 

Tension Bar/ Gate Rods/ 

1 Meter 1 Reinforced Relevant Rubber 

Hose 

1 kg 1 Re-rollable scrap of Usable 

Scrap/Billet Cuttings 

OR 

1.01 Meters. 

1.15 kg.

Truss Rods/ Drop Rods. 

C677 Deleted 

C678 Hurricane Lantern made 

of Tin plate 

C679 Hypodermic Needles 

(Disposable or Reusable) 

C680 ILD Fork 

C681 ILD Guide 

C682 Deleted 

C683 Indust. Offset Bracket 

C684 Industrial Locking 

Device 

C685 Industrial Offset Hinge 

(Galvanised) 

MS Billets/Blooms 

OR 

1.12 kg. 

Non-Alloy Steel Wire Rods 1.07 kg 


1 No. 1 Tinplate Waste 1.10 Kg per kg 


10000 Nos 

(of 

Dia/Gauge 

"X") 

1 Stainless Steel Capillary Tube of 

Dia/Gauge "X" 

OR 

1 Stainless Steel Cannulae of 

Dis/Gauge "X" 

OR 

1 Stainless Steel Strips (AISI 

304L) 

C141 

440 Mtrs. 

10500 Nos. 


export. 

2 Polypropylene Granules 1.05 kg/kg content in 

export 

a) Brass Scrap 1.075 kg/kg content 

in export 

b) Nickel Plate 5 kgs 


Drills, Cut off Wheels, Grinding 

Wheels, Glue. 


Coils 



0.918 kg 


3 Zinc 0.050 kg 

1 kg. 1 Refractories porous 

plug/seat/blocks/sleeves/slide 

gate plate 

0.0375Kg. 

Hot Rolled MS Sheet/ Strips/ 

Coils 

1.046 kg 

2 Zinc 0.050 kg 


Coils 

0.602 kg 


3 Zinc 0.040 kg 


Coils 

1.030 kg 


3 Zinc 0.038 kg 

1 No. 1 Mild Steel HR Sheet/Coil 1.10 kg/kg content in 

export 

2 Mild Steel Rounds 1.05 kg/kg content in 

export 


export 

4 Zinc Upto 2% of weight of 

export 

C686 Industrial Roller 1 kg 1 CR-Non Alloy Steel 

Chain(Above 1-1/4" Pitch 

Sheet/Coil/Welded/Seamless 

1.556 kg.

Size) including Spares. 

C687 Industrial Roller 

Chain(Above 3/4" Pitch 

and upto 1-1/4" Pitch) 

including Spares 

C688 Industrial Roller/Motor 

Cycle/Automotive Timing 

chain including spares 

(Upto 3/4" Pitch Size ). 

C689 Industrial Valve (Casr or 

Forged Body) 

1 

Non-Alloy Steel Tubes 

OR 

HR- Non Alloy Steel Sheet/Coil 1.826 kg. 

2 Alloy Steel Wire/Wire Rod in 

Coil 

3 Spring Clip/Cotter Pin (Chain 

Component) 


Grease, Rust, Preventive Oil, 

Punching & Piercing Tools, 

Extruder Dies & Die Inserts, 

Sizing Rolls, Stamping Punches, 

HcHCr D2 & D3 material HSS 

M2 material, H11 hot die steel, 

O2 oilSteel. 

1 kg 1 CR-Non Alloy Steel 

Sheet/Coil/Welded/Seamless 

Non-Alloy Steel Tubes 

OR 

C142 

0.254 kg. 

Net to Net 


Value of exports. 

1.258 kg. 

1 HR- Non Alloy Steel Sheet/Coil 1.479 kg. 

2 CR Alloy Steel Sheet/Coil 

OR 

0.156 kg. 

2 HR-Alloy Steel Sheet/Coil 0.177 kg. 

3 Alloy Steel Wire/Wire Rod 0.246 kg. 


Component) 

5 Misc. Items:Grease, Rust, 

Preventive Oil, Punching & 

Piercing Tools, Extruder Dies & 

Die Inserts, Sizing Rolls, 

Stamping Punches, HcHCr D2 & 

D3 material HSS M2 material, 

H11 hot die steel, O2 hardened 

steel. 

Net to Net 



1 kg 1 CR-Non Alloy Steel 

Sheet/Coil/CHQ Wire in Coil 

OR 

1.055 kg. 

1 HR Non Alloy Steel 

Sheet/Coil/CHQ wire Rod in coil 

1.240 kg. 

2 CR Alloy Steel Sheet/Coil 

OR 

0.153 kg. 

2 HR-Alloy Steel Sheet/Coil 0.174 kg. 

3 Alloy Steel Wire/Wire Rod 0.235 kg. 


Component) 


Grease, Rust, Preventive Oil, 

Punching & Piercing Tools, 

Extruder Dies & Die Inserts, 

Sizing Rolls, Stamping Punches, 

HcHCr D2 & D3 material HSS 

M2 material, H11 hot die steel, 

O2 oil hardenedsteel. 

1 No. 1 1) Industrial X ray films (various 

grades of gamma rys iridium 192 

and Cobalt 60 

(B) For forged body/Trims/Cover 

- 1Kg 

Net to Net 



11.8Sq.CM 

1.35Kg.

C690 Cryogenic Tank for 

Liquified Gases 

2 Forging quantity carbon/nonalloy/alloy/stainless 

steel 

bars/rods/billets/blooms/ingot 

(relevant material) 

1) For Stem (weight 1 Kg) Stainless 1.1Kg 

Steel bar/rod of relevant grade 

2) For opertor (hand 

wheel/lever/wrench) (1Kg) 

Carbon Steel Rod/Pipe/Plate 

1.02Kg. 

3) Asbestos free graphite/PTFE 

packing/gsket 

1 Set. 

4) Miscellaneous items like 

Tungsten carbide tip tools, dies, 

drills, taps die blocks/hrd facing 

electrode/power 

3% of the FOB value. 

1 For 1Kg of weight of Body, Trim 

Ball, Gate, Plug Disc, Cover, 

Bonnet. 

a) For Carbon/Non Alloy Steel 

casting (On the basis of net 

weight of the item and on net 

content) of items mentioned 

above:- Non Alloy Steel Melting 

Scrap OR 

1.7Kgs. 

1 b) For Stainless Steel Casting (On 

the basis of net weight of the 

item and on net content):- 

A) Stainless Steel Scrap 0.863Kg. 

B) Iron Flakes/pure Iron/Iron 

powder 

C) Ferro Chrome/Charge Nickel 

Oxide sinter/Ferro Nickel OR 

1 D) Ferro Chrome 

Nickel 

Ferro Manganese 

Ferro Molybdenum 

Ferro Silicon 

E) For both Stainless Steel and 

Carbon /Non Alloy Steel 

Casting:- 

Additive comprising of core 

wire/scrap/Ingots/shots of 

Aluminium core wire/Lumps 

Powder of Calcium Silicide 

(CaSi)Lumps powder of misch 

metal Ferro Silicon/Ferro Silicon 

Ferro Manganese 

C143 

0.387Kg. 

0.400 Kg 

0.0875Kg. 

0.125Kg 

0.0125Kg. 

0.0625Kg. 

0.025Kg. 

0.05Kg for carbon 

steel casting and 

F) Resin Coated Sand 0.45Kg for carbon 

steel, 1.563 Kg for 

Stainless Steel. 

G) Organic binders 0.2Kg. 

H) Welding Electrode 0.0125Kg. 

I) Mold Wash/Mold Coat 0.03125Kg. 

J) Grinding Wheel. 0.00625Kg. 

1 No. 1 Hot Rolled Stainless Steel Plates 1.10 MT/MT content 


2 Boiler Quality Carbon Steel 

Plates 



3 Stainless Steel Pipes Net to Net

C691 Integrated Watch Cases 

with/without Chain 

4 Perlitte Insulating Powder Net to Net 

5 CS Section Net to Net 

6 SS Section Net to Net 

7 Corrosion Resisting Bronze 

extended Stem Cryogenic Valves 

C144 

Net to Net 

8 Bronze Check Valve Net to Net 

9 Safety Valve Net to Net 

10 Pressure Building Regulator Net to Net 

11 DP Level Gauge Net to Net 

12 Misc. items: Welding Wire & 

Welding Flux 



1 No. 1 Bezel Net to net. 

2 Watch Glass Net to net. 

3 Plastic Movement Holder Net to net. 

4 Back Cover Net to net. 

5 Watch Chain/ Bracelet Net to net. 

6 Side Bar Pin Net to net. 

Note : 1. Item 5 to be allowed only when export product is accompanied with this item. 

C692 Items manufactured out 

of GP Sheets 

1 kg 1 GP Sheets/ Coils/ Secondary 1.050 kg 

C693 Items manufactured out 

of tin plate 

1 kg 1 Electrolytic Tin Plate/ Tin Plate 

Waste/ Waste 

1.050 kg 

C694 J-Bracket 

1 kg. 1 MS Round 1.094 kg 

2 Zinc 0.035 kg 

C695 Jotter Ball Point Pen. 

1000 pcs. 1 SS Strips/ sheets/ coils 1.05 Kg/Kg content 

in export 

2 SS Wire/Nickel silver wire/Brass 

wire 

3 SS Balls/Tungsten Carbide Ball/ 

Ceramic Balls 


of relevant material 

in export 

1020 No. relevant in 

export 

4 ABS Powder 1.05 Kg/Kg content 

in export 

5 Brass Tube/Rod Strip/Scrap 1.05 Kg/Kg content 

in export 

6 Derlin powder/polyacetal Resin 1.05 Kg/Kg content 

in export 

7 Refill Ink 

OR 


in export 

7 a) Ketonic Resin/Synthetic Resin 0.40 Kg/kg of ink 

content 

b) Glycol 0.40 Kg/kg of ink 

content 

c) Dyestuff 0.10 Kg/kg of ink 

content 

C696 Jotter refills 1 kg. 1 Copper tube 1.050 kg 

C697 Knitting Needles/ Pins- 

Double ended made out 

of Aluminium 

1000 Sets 

each (34.5 

kgs) 

1 Aluminium Rods 

OR 

37.95 kgs OR 

36.225Kgs. 

1 a) Aluminium Wire (Not below 36.225Kgs.

C698 Knitting Needles/ Pinsknobbed 

made out of 

Aluminium 

C699 Knitting Needles/ Pinsknobbed 

Plastic 

C700 Lever Latch for Locking 

Ring 

1000 

Nos/Pairs 

(5.714 Kgs) 

1000 

Nos/Pairs 

(12.0 Kgs) 

3mm) 

1 Aluminium Rods 

OR 

C145 

6.285 kgs 

1 a) Aluminium Wire (Not bwlow 

3mm) 

5.999Kgs. 

1 Relevant Plastic material 12.6 kgs 

1 MT 1 HR/CR CA Steel 

Sheet/Coils/Strips 

1.46 MT 

2 Zinc 4% of the net weight 

of the steel to be 

galvanised. 

Note : Import item 2 i.e. Zinc to be allowed only in case the export product is galvanised. 

C701 Locks and valves water 

pipe filling 

1 kg 1 Pig Iron 1.100 kg 

C702 Loop cap 

1 kg. 1 Cold Rolled MS Sheets/ Strips/ 

Coils 

1.069 kg 

2 Zinc 0.115 kg 

C703 Loop Cap 

C704 LPG Cylinders with/or 

without valves 


2 Zinc 0.030 kg 

1 No. 1 Valves 

OR 

Net to Net 

1 Brass Scrap 1.12 Kg/Kg content 


2 HRMS Sheet/ Plates 

OR 

HRMS Cells 





3 M.S. Round Bars 1 Kg/Kg content in 


4 Zinc Ingot 0.17 kg per Cylinder. 

5 Misc. items: Copper Coated Steel 3% of the FOB value. 

Wire of dia 3.15mm and 0.8mm, 

Welding Flux/ Rod, L.D.O., 

Primer Point, Shot/ Grits, D.D. 

Compound 

Note 1. Item No. 1 will be allowed if Cylinders are exported with Valves. 

2. Zinc Ingot will be alowed if the Cylinders are exported with Zinc coating. 

3. Packing material may be allowed as per packing policy. 

C705 M.S. Fish Plate 1 Pair 1 M.S. Billets 1.12 kg/kg content in 


C706 M.S. Tubular Folding 

Furniture with Plastic 

Fittings 

1 kg 1 Colled Rolled Mild Steel Strips 1.05 Kg./Kg. content 


2 Spring Steel Wire 1.05 Kg./Kg. content 


3 P P Granules 1.05 Kg./Kg. content 


4 Grey/ Pulp Board (Furniture 

Grade) 



5 Powder Paint (Solid based) 1.05 kg/kg content in 


6 Relevant PVC Fabrics 1.02 kg/kg content in

C146 


7 Relevant PU Foam 1.02 kg/kg content in 


8 Relevant Synthetic Fabric 

(Polyester Based) 



Note: Import of powder paint (Solid Based) will be allowed @1.05 kg/kg content for furniture having 

powder paint coating only. 

C707 M.S. Washer 

Galvanised/painted 

1 Kg 1 CRCA/HR Mild Steel Sheets/ 

Coils/Strips(including 

Seconds/Defective). 

2 Zinc 

OR 

Paint 

OR 

Coating Powder 

1.50 Kgs 

Note.1 : Import of CRCA is allowed only if the export product is made out of CRCA. 

C708 Male Bracket 


Coils 

0.674 kg 


C709 Male Hinge/ Male 

Bracket 

C710 Male Lag Bracket 

C711 Malleable Box Hinge 

C712 Manually Operated 

35mm Camera with Built 

in Flash 

3 Zinc 0.040 kg 


Coils 

0.674 kg 


3 Zinc 0.040 kg 


2 Zinc 0.035 kg 

0.04 Kg (Hot dip 

Galvanised or 0.01Kg 

if Electro Plated). 

OR 


1 kg 1 MS HR Sheets/Coils 1.06 kg/kg content in 

export 

2 MS Rounds 1.20 kg/kg content in 

export 


export 

4 Zinc 0.037 kg/kg of 

galvanised items in 


1 No. 1 ABS Moulding Powder/Granules 1.05 kg/kg content in 


2 Poly Acetal Moulding 

Powder/Granules 

3 Polycarbonate Moulding 


4 PMMA(Polymethyl- 

Methacrylate Moulding Powder 

Granules) 







5 Transistors Net + 2% wastage. 

6 Flash Kit Module, consisting of 

PCBs, Capacitors, Trsnsformers, 

Triggers Coils, Neon Capacitor, 

Triggers, Diode Resistors, 

Triggers, Contact & Flash Tube 

Net + 2% wastage. 

7 Phospher Bronze Scrap 1.05 kg/kg content in 


8 Anodised Aluminium Reflector 

Sheet/Coil 



9 Taking Lens Front & Rear Net to net.

C713 Marine freight containers 

of type ICC 20'x8'x8.5' 

C714 Mechanical Watch 

Movement Automatic 

Day & Date 

C715 Metal Casing Vaccum 

Flasks (Made from Tin 

Plates) 

10 Neon Window Net to net. 

11 Springs Set(of 8) Film Counter, 

Shutter Sector, Pressure 

Plate,Sprocket Axle, Lens Covers 

22Screws (8 No./Set) 


12 Screws (8 No./Set) Net + 2% wastage 

1 No. 1 Carbon steel Hot Rolled 

Sheets/Plates BS 4360 50B & IS 

1079 ST 34 6.4mm to 3mm 

thickness 

786.50 kg 

2 Hot Rolled Alloy Steel Sheets/ 

Plates Carton-A 2mm & 1.5mm 

thick 

905.30 kg 

3 Paints 60 Ltr 

1000 Nos 1 Movement Components Net to net 

1 No. (1000 

ml) 



2 Tin Plates 1.10 kg/kg content in 


3 Chemicals for Glass Shell: 

a) Borax 80 gms. 

b) Selenium 2 gms. 

c) Arsenic 2 gms. 

d) Soda Ash 100 gms. 

e) Sodium Silico Fluoride 25 gms. 

f) Silver Nitrate 1.5 gm. 

g) Caustic Soda 25 gms. 

h) Silicon Oil 0.5 gm. 

C716 Metal Clips for Pens. 1 kg 1 S S Strips 1.05 kg 

C717 Metal Fountain Pens 100 pcs 1 Barrel 102 Pcs 

2 Cap 102 Pcs 

C718 Mathematical Instrument 

Box with/without PVC 

Trey 

3 Clips 102 Pcs 

4 Printing Ink 1.05 gm 

1 No. 1 M.S. Sheet Defective Tin 

Free(For Box) 

C147 



2 M.S. Sheet (For Compase) 1.05 kg/kg content in 


3 PVC Granules (For Trey) 0.8 kg/kg content of 

PVC Trey. 

4 Polystrene (For Plastic Article) 1.05 kg/kg content in 

export. 

5 Poly Propylene 1.05 kg/kg content in 

export. 

C719 Mild Steel Hollow Rivets 1 kg 1 Mild Steel Wire/Wire Rods 1.2 kg 

C720 Mild Steel Rivets 1 kg 1 Mild Steel Wire/Wire Rods 1.06 kg 

C721 MS Aldrop-Nickel Plated 1 kg 1 CRCA Sheet/Second Grade 1.30 kg/kg of net 


product.

C722 M.S. Bucket Handle Duly 

plated with nickel or 

Copper or Zinc/Powder 

Paint Coated 

C723 MS Colour coated 

Ghamala(made of HR 

Sheet) 

2 Low Carbon Wire Rod 1.12 kg/kg of net 


product 

3 Nickel 0.01 kg/kg of the 

steel to be plated 

1 kg 1 M.S. Wire Rod 1.05 kg. 

2 Nickel 

0.97% of weight of 

Steel to be Nickel 

OR 

Plated. 

OR 

Zinc 


Steel to be Zinc 

OR 

Plated. 

OR 

Copper 


Steel to be Copper 

OR 

Plated. 

OR 

Powder Paint 0.97% of weight of 

Steel to be Powder 

Painted 

1 MT 1 H R Sheets 1.16 Tonne 

C724 MS Drum 1 kg 1 CRCA Sheet 1.050 kg 

C725 MS Paper pin & Clip 1 kg 1 M.S. wire 1.05 kg 

C726 MS Washer 1 kg 1 CRCA/H.R. Mild Steel Sheets/ 

Strips/Coils (including seconds 

and defective). 

1.50 kg 

Note : 1. In case, the export product is Hot Dip galvanised, in addition to above items, an additional item 

Zinc shall be allowed @ 4% of net weight of Steel in the export product. In case the product is 

electroplated, Zinc shall be 

allowed @ 1% of net weight of steel in export. 

C727 MS Window, Door 

Ventilator, Grate/ Grills, 

Fabricated Frames and 


1000 kg 1 Non Alloy Steel Billets 1070 kg 

C728 Needle Roller Bearing 25 

mm to below 50 mm I.D. 

1000 Nos. 1 Steel strips 25CrM04/RST3/ 

CK15/C15M/ equivalent 

57.42 kg. 

2 Steel wire SAE 

2100/100CR6/SUJ2/ equivalent 

60.19 kg. 

3 Miscellaneous Items: Grinding upto 5% of FOB 

Wheel, Work Rest Blade, Green 

Silicon Carbide, Rust Preventive 

Chemical, Molykote DX, 

Packing Grease, Carbide Tips, O 

Rings, Oil Seals, Rubber Wheels, 

Lubricating Oils, Vulcolon, 

Polishing Compound, Soda Ash 

& Caustic Soda 


C729 Needle Roller Bearing 

Type BK/ HK/SCE/SCH 

below 25 mm I.D. 

1000 Nos. 1 

2 

Steel Strips to 

25CrM04/RST4/RST3/ CK 

15/CI15M/ equivalent 

Steel wires to SAE 

52100/100CR6/ SUJ2/equivalent 

19.25 kgs. 

5.60 kgs. 

3 Steel cage 1100 Nos. 

4 Misc. Items: Grinding Wheel, upto 5% of FOB 

C148


Type BK/ 

HK/SCE/SCH/MNJ 25 

mm I.D. 


Type BU/ HN/BN/HV 

below 25 mm I.D. 

C732 Needle Roller Bearings 

type - KZK upto 30 mm 

OD 

C733 Needle Roller Bearings 

Type -K/KBK upto 20 

mm OD. 

Work Rest Blade, Green Silicon, 

Rust Preventive Chemical, 

Molykote DX, Packing Grease, 

Carbide Tips, O Rings, Oil Seals, 

Rubber Wheels, Lubricating Oils, 

Vulcolon, Polishing Compound, 

Soda Ash & Caustic Soda 


1000 Nos. 1 Steel Strips 25 CrM04/RST4 

RST3/CK15/C15M/ equivalent 

54.95 kg. 

2 Steel cage 1100 Nos. 

3 Steel Wire SAE 

2100/100CR6/SUJ2/ equivalent 

4 Misc. Items: Grinding Wheel, 

Work Rest Blade, Green Silicon 

Carbide, Rust Preventive 







1000 Nos. 1 Steel Strips 26CrM04/RST3/ 

CK15/C15M equivalent 

2 Steel Wire SAE 52100/100CR6/ 

SUJ2 equivalent 

3 Misc. Items: Grinding Wheel, 









1000 Nos. 1 Steel Strips 25 Cr MO 4 Rst4 or 

equivalent 

2 Steel Wire SAE 52100/100 Cr16 

or equivalent. 

3 Misc. items: 

Grinding Wheel, Work Rest 

Blade, Green Silicon Carbide, 

Rust Preventive Chemicals, 

Molykote DX, Packing Grease, 

Carbide Tips, O Rings, Oil Seals, 

Rubber Wheels, Lubricating Oils, 

Vulcolon, Polishing compounds, 

Soda Ash, Caustic Soda, Coolant, 

Blackening Salt, Hydraulic oil, 

Trichloro ethylene. 

1000 Nos. 1 Steel Tubes SCM 415/Rst 

3/C15/STKM or equivalent 

2 Steel Wire SAE 52100/100 Cr6 

or equivalent 

3 Misc. Items:Grinding Wheel, 


Carbide,Rust Preventive 

Chemicals, Molykote DX, 

Packing Grease, Carbide Tips,O 


Lubricating Oils, 

Vulcolon,Polishing compounds, 

Soda Ash, Caustic Soda, Coolant, 

C149 

23.90 kgs. 



18.05 kg 

9.57 kg. 



31.69 kg. 

16.17 kg. 


FOB Value of 

exports. 

34.92 kg 

8.3 kg 


FOB Value of 

exports.

C734 (a) Needle Rollers upto 4 

mm Dia 

(b) Needle Rollers above 

4 mm to 8mm Dia 

© Needle Rollers above 8 

mm Dia 

C735 Needle Screws Self colour 

or Plated 

C736 Nickel Plated M S 

Buckles 

C737 Non-Alloy Steel Wire 

Nails (excluding Stainless 

Steel) 

C738 Nuts/Bolts/ Screws made 

of Stainless Steel of 

variety-x 

C739 Nyloc Self Locking Nuts, 

Steel Locking Nuts and 

Wheel Nuts made from 

1 kg 

1 kg 

1 kg 

C150 

Blackening Salt, Hydraulic oil, 

Trichloro ethylene. 

For (a): 

1 Steel wire to SAE 52100/100 

CRG/ SUJ2/equivalent 

2 Misc. items: Grinding Wheel, 









For (b): 

1 Steel Wire to SAE 52100/ 100 

CRG/ SUJ2/ equivalent 










For (c): 

1 Steel Wire to SAE 52100/ 100 

CRG/ SUJ2/ equivalent 










1 kg 1 High Carbon and high chromium 

Steel wire 

1 MT 1 MS Seconds defective 

sheets/coils strips 

1.45 kg. 



1.28 kg 



1.21 kg 



1.200 kg 


in export 

2 M S Wire 1.05 MT/MT content 

in export 

3 Nickel Limited to 1% of 

weight of resultant 

product 

1 M.T. 1 Non Alloy Steel Wire Rod 

(excluding Stainless Steel Wire 

Rod) 

1.1 MT 

1 kg 1 Stainless steel Rods/ Wire Rods/ 

Wire/ ingots of variety-x 

1 MT 1 EN/ AISI/ DIN/ JIS Series Steel 

excluding Stainless Steel in the 

form of Wire Rods/HEX Bars in 

Coils and /or Straight length 

1.27 kg 

1.939 MT

EN/ AISI/ DIN/ JIS 

Series Steel excluding 


C740 Offset Rail End 

C741 OTS cans for packing 50 

- 500 gms of instant 

Coffee 

C742 OTS Cans/ dingeley cans 

(Seam Welded). 

1 kg. 1 Cold Rolled MS Sheet/ Strips/ 

Coils 

0.884 kg 


3 Zinc 0.042 kg 

1 kg 1 Tin Plate Prime 1.300 kgs 

2 Lining Compound 0.015 kg 

1 kg 1 Electrolytic tin plate 1.10 kg 

2 Lining Compound 0.015 kg 

Note: Item No 3 shall be allowed in case of export of Lacquered Can 

C743 Oxygen Cylinder dia 140 

MM 

C744 Oxygen Cylinder dia 229 

MM 

C745 Paddy Thrasher 

C746 Panel Clamp 

C747 Panels made of CRCA 

Sheets 

3 Tin plate Lacquer 0.009 ltr 

1 No. 1 Hot Rolled CRMO Seamless 

SteelTube/Pipes. 

1 No. 1 Hot Rolled CRMO Seamless 

SteelTube/Pipes. 

1 Number. 1 MS CRCA sheet/ coil/ strips 



C151 

1.29 kg 

1.663 kg 



2 MS Plates 1.08 kg/kg content in 


3 Mild Steel 

Angles/Shapes/Section. 



4 MS Rounds 1.10 kg/kg content in 

the export prdouct. 


Coils 

1.010 kg 

2 Zinc 0.065 kg 

1 kg. 1 Mild Steel CRCA Sheets/ 

Cuttings/ Coils 



Note: In case the export product is Epoxy coated, Epoxy powder upto 4% of FOB value of exports shall 

also be allowed. 

C748 Paper Punch 1 kg 1 Cold Rolled Non Alloy Steel/ 1.56 kg 

Strips/Sheets. 

C749 Pen Barrels 

C750 Pen Caps 

C751 Perforated Construction 

Stakes (Round /Flat/ 

Square) 

C752 Photo frame made of 

Brass. 

1 kg 1 Brass Scrap 

OR 



1 S S Steel tubes 1.02 kg/kg content in 


1 kg 1 Brass Scrap 

OR 



1 S S Steel Tubes 1.02 kg/kg content in 


1 MT 1 Non-Alloy Steel Billets / Ingot / 

Blooms / Slabs 

OR 

Non-Alloy Steel Bars & Rods 

(Round / Flat / Square including 

in coil form)/ Wire Rods 





1 kg 1 Brass Sheet 1.190 kg/kg content 

of Brass in the export 

product.

C753 Photo-Engraving Zinc 

Sheets 

C754 Pilfer Proof Caps- 

Plain/Printed with E.P. 

Liners 

2 Tin/Nickel. The CIF Value taken 

together may be 


the FOB value. 

3 Hard Board. 1.200 kg/kg content 


4 Glass 1.200 kg 

1.0 Kg 1 Zinc Ingot 1.04 kg./kg content of 

Zinc in export 

1 kg 1 Aluminium Sheet/Coils 1.1 kg/kg content in 


2 LDPE 1.05 kg/kg content in 


3 Printing Ink 0.020 kg 

4 Coating Laquer/Varnish 0.045 Ltr. 

"Note: The import item No. 3 i.e. Printing Ink will be admissible only when export product is printed." 

C755 Deleted 

C756 Deleted 

C757 Deleted 

C758 Deleted 

C759 Deleted 

C760 Deleted 

C761 Deleted 

C762 Deleted 

C763 Deleted 

C764 Deleted 

C765 Deleted 

C766 Deleted 

C767 Pole Line Hardware 

Fittings & Accessories 

1 MT 1 High Tensile Steel and Mild 

Steel Billets/Angles/Plates 

1.05 MT 

(Galvanised) 2 Unwrought Zinc 0.05 MT 

C768 Post Cap 

1 kg. 1 Cold Rolled MS Sheets Strips/ 

Coils 

1.033 kg 

2 Zinc 0.115 kg 

C769 Post Cap 

C770 Presensitised Positive 

Offset Aluminium plates 

C771 Pressure Stoves/ kerosene 

burners/ pressure lamps 

blow lamps/ pressure 

lanterns/ fancy light 

fittings made of brass 

C772 Primary/ Secondary 

Blades of Shaving system 

cartridges (for Twin 


2 Zinc 0.030 kg 

1 Sq. mt 1 Aluminium Sheet 1.05 kg/kg content in 


2 Diazo 2.76 gms/sq mts 

1 kg 1 Brass Scrap 1.075 kg 

One Million 

Nos. 

1 CRSS Strips 433 kgs 

C152

Blade) 

C773 Printed Lug Cap with 

Internal Coating Lined 

with PVC compound 

C774 PVC Co-extruded 

Galvanised Non- Alloy 

Steel Wire 

C775 Racks made of CRCA 

Sheets 

C776 Rail End 

C777 Rakes/Garden Rakes/ 

Fork Manure Hooked 

1 kg 1 Tin Plate Prime 1.30 kg 

2 PVC Compound 1.05 kg/kg content in 


3 Terpentine 0.135 Ltr. 

1 MT 1 Non-Alloy Steel Rod 1.05 MT/MT content 


2 Zinc Ingot 4% of net weight of 

steel to be 

galvanised. 

3 PVC Resin 0.8 kg/kg of PVC 

compound in export. 

1 kg content 

of import 

item 



secondary 

C153 

1.05 kg 

1 kg. 1 Cold Rolled MS Sheet/ Strips/ 

Coils 

0.884 kg 


1.000 kg 

Content of 

Import Item 

C778 Rectangular tops fitted 1 kg of Top 

C779 

with screw neck & handle and Bottom 

and bottoms 

Rectangular/ Square Tin 

Plate container and/ or 


C780 Rectangular/Square Tin 

Plate container and/or 

component thereof with 

round neck. 

C781 Rings, Lid and Tagger 

Assemblies with or 

without Tagger (with or 

without matching Bottom 

Piece) made of Tin Plate 

C782 Round Tin Containers 

(other than OTS cans) 

and parts thereof 

C783 Round tops/ ends 

(bottoms) of containers 

made of Tin Plate 

3 Zinc 0.042 kg 

1 Non-Alloy Steel Round/ Billets 

OR 

1.250 kg 

HR Sheets/Coils(Seconds) 1.10 kg. 

1 Electrolytic Prime quality Tin 

Plate 

1.20 kg 

1 Kg 1 Electrolytic Tinplate waste/waste 1.10 kgs 

1 Kg 1 Electrolytic Tinplate waste/waste 1.15 kgs 

1 kg Ring, 

Lid and 

Matching 

Bottom 

Piece(excludi 

ng Tagger) 

1 Electolytic Prime Quality 

Tinplate/ Tin Plate Waste/ 

Waste` 



2 Lining Compound (Item to be 

specified) 

3 gms 

3 Aluminium Foil 1.08 kg/kg content in 


1.0 Kg 1 Electrolytic Tinplate 

Waste/Waste 

1.15 kg 

1 kg 1 Electrolytic Prime Quality Tin 

Plate/ Tin Plate Waste/ Waste 

C784 Rounda File System 1 MT 1 ABS Moulding Powder(Injection 

Moulding Grade) 

1.25 kg 


in the export product.

C785 Rubber Wheel 

C786 Saddle Clamp 

C787 Sanitary and bathroom 

fittings made out of 

Brass/aluminium 

C788 Sanitary and bathroom 

fittings (of gun metal) 

C789 Sanitary and Bathroom 

Fittings including 

parts/Components 

thereof made of Brass 

(Nickel/Chrome Plated). 

C790 Scrool 

C791 Seamless Stainless Steel 

Tubes (Cold Finished) 

2 Non-Alloy Steel Rounds 1.80 MT/MT content 


3 Ball Bearing(Relevant) Net to net. 

4 M.S. Tube/Pipe 1.05 MT/MT content 



Coils 

C154 

0.250 kg 


3 Zinc 0.030 kg 


Coils 

1.010 kg 

2 Zinc 0.065 kg 

1 kg 1 Brass/Aluminium Scrap OR 

Brass/Aluminium Ingot. 

1 kg 1 Gun metal scrap OR Gun metal 

Ingot. 

1 kg 1 Brass Ingot 

OR 

1.075 kg OR 

1.05Kg/Kg. 

1.075 kg OR 

1.05Kg/Kg. 


Brass in export 

product. 

Brass Scrap 1.15 kg/kg content of 

Brass in export 

product. 

2 Nickel/Chrome Upto 0.5% of the net 

weight of the export 

product. 


Coils 

1.018 kg 

2 Zinc 0.075 kg 

1 MT 1 Stainless Steel Bars/ Billets/ 

Blooms 

2.0 MT 

2 Band Saw Blades 0.74 Nos 

3 Glass Powder 42.00 kg 

4 Lubricating Oil for Cold 

Pilgering 

5 Billet Radiusing Inserts 

6 BTA Heads 

3.00 Gallons (13.638 

Ltrs) 

Import of item 5 & 6 together is restricted to a maximum value of 3% of total FOB value 

C792 Seamless Stainless Steel 1 MT 1 Nickel Oxide/Ferro Nickel 0.308 MT 


(Stainless steel grade- 

304/304L/321) 

2 

3 

MS Melting Scrap 

Band Saw Blades 

2.0625 MT 

0.74 No 

4 Glass Powder 42.00 Kgs 



(Stainless steel grade- 

316/316L/316 TI) 

5 Lubricating Oil for Cold 

pilgering 

3 Gallons (13.638 

Ltrs) 

1 MT 1 Nickel Oxide/Ferro Nickel 0.406 MT 

2 Molybdenum Oxide/ Ferro 

Molybdenum 

0.078 MT 

3 MS Melting Scrap 2.0625 MT 

4 Band Saw Blades 0.74 No 

5 Glass Powder 42.00 Kgs


Tubes/ Pipes (Hot 

Finished) 

6 Lubricating oil for Cold Pilgering 3 Gallons (13.638 

Ltrs) 

1 MT 1 Stainless Steel Bars/ Billets/ 

Blooms 

2 Band Saw Blades 

3 Glass Powder 

4 Billet radiusing inserts. 

5 BTA Heads 

C155 

1.50 MT 

Note : The quantity permissible in respect of import items at Sl. No. 2,3,4, and 5 taken together will be 

restricted to 4% FOB value of exports 

C795 Seamless Stainless Steel 1 MT 1 Nickel Oxide/Ferro Nickel 0.216 MT 

Tubes (Hot Finished) 

(Stainless steel grade - 

304/304L/321) 

2 

3 

MS Melting Scrap 

Band Saw Blades 

1.444 MT 

0.52 No 



Tubes (Hot Finished) 

(Stainless steel grade - 

316/316L/316TI) 

C797 Seamless Steel Pipes and 

Tubes (other than 

Stainless Steel) Hot 

Finished. 

C798 Seamless/Butt Welded 

Steel Pipe Fittings made 

from Seamless/ ERW 

Steel Tubes. 

1 MT 1 Nickel Oxide/Ferro Nickel 0.284 MT 

2 Molybdenum Oxide/Ferro 

Molybdenum 

0.055 MT 

3 MS Melting Scrap 1.444 MT 

1.0 kg 

Content of 

Import Item 

4 Band Saw Blades 0.52 No. 


1 Alloy/ Non-Alloy Steel Billets/ 

Rounds/ Bars 

1 MT 1 Alloy/ Non-alloy Steel seamless/ 

ERW Tubes/Pipes 

1.20 kg 

C799 Self Tapping Screw 1 kg 1 MS Wire Rod 1.17 kg 

C800 Sewing Machine Needles 1 kg 1 High Carbon Steel Wire 

Annealed and Fully Spheroidised 

in 2.033 mmDiameter or 

Diameter of the Wire to be 

used/required 

C801 Shaft "A" (Part of 

Computer Printer) 

C802 Shoe tacks made of 

CRCA 

C803 Shoulder Bolt made out 

of CHQ Alloy Steel/ 


C804 Deleted 

C805 Shuttering Clamps/ 

Column Clamps 

C806 Folding Bed made of 

Mild Steel 




export. 

1 MT 1 Steel Rod AISI 12L 14 1.10 MT/MT content 


1.0 Kg 1 CRCA Sheets/ Coils/ Strips/ 

seconds/ defective 

1.05 Kg 

1 Kg 1 Relevant CHQ Alloy Steel/ 

Stainless Steel Wire Rods in coils 

or Bars 

1.65 Kgs 

1 kg 1 M.S. Wire Rod 1.05 kg/kg content in 

export. 

2 H.R. Sheets/Coils 1.05 kg/kg content in 

export. 

1 kg 1 MS Defectives (Hot rolled only) 1.050 kg 

C807 1 Kg 1 Alloy Iron powder 1.0531 Kg

C808 Sleeve 

Sintered Alloy Iron 

Bushes & Parts 

C809 Sleeve Bracket 

C810 Snap Fastners consisting 

of Stud & Socket 

C811 Snap Off Blade Cutter of 

different size 

C812 Soft Box (for use with 

Electronic Studio Flash 

Lights) 

2 Solid Lubricant 0.0106 kg 

3 Lubricating Oil 0.0318 kg. 

4 Misc. Items: Natural Graphite CIF Value not to 

Powder/Manganese Sulphide exceed Rs. 1.70/kg of 

Powder, Jig Grinding Wheels and product exported. 

Honing Stones 

1 kg. 1 Hot Rolled MS Sheets/ Strips/ 

Coils 

0.962 kg 

2 Zinc 0.115 kg 


Coils 

1.045 kg 

2 Zinc 0.050 kg 

1 Kg 1 Brass Strips 1.15 kg./kg content in 


2 Phosphor Bronze Wire 1.04 kg./kg content in 


1 MT 1 ABS Copolymers 1.05 MT/MT content 

in export. 

2 Snap Off Blades of relevant size Net to net. 

1 No. 1 Reflective Cloth Net + 15% wastage. 

2 Diffusion Cloth Net + 5% wastage. 

3 Nylon Ribbon 1" Net to net. 

4 ABS Moulding Powder Net + 5% wastage. 

5 CRCA Sheet Net + 10% wastage. 

6 Carbon Steel Pipe Net + 2% wastage. 

C813 Spade/Shovels 1Kg. 1 Non AlloyHR/CR Steel 

Sheets/Strips/Wide Coils OR 

1.10Kg/Kg content of 

relevant steel in the 


Sheets/Strips/Wide Coils 


C814 Split Air Conditioner 1 No. 1 Compressor 1 No. 

capacity (1.5 Ton & 

above) 

2 

3 

Bearing Assembly 

Grill Assembly (in) 

1 No. 

2 Nos. 

4 Grill Assembly (out) 1 No. 

5 Air Filter 2 Nos. 

6 Panel Assembly (Ornament) 1 No. 

7 Panel Side RH 1 No. 

8 Panel Side LH 1 No. 

9 Propeller (Fan) 1 No. 

10 Couplers Set/Valve Shut-off (14 

Pieces) 

1 Set. 

11 Control Assembly 1 No. 

12 Copper Tube 1.01 kg/kg content in 


13 Fractional HP Motor (O) 1 No. 

14 Steel Sheets (GP & CRCA) 1.05 kg/kg content in 


15 Capacitor-36 MFD, 440 V. 1 No. 

16 Fractional HP Motor (I) 1 No. 

17 Copper Corollary 0.35 kg. 

C156

C815 Spot Grid 

C816 Stainless Steel Cannulaes 

made out of Stainless 

Steel Tubes/Wires 

C817 Stainless Steel Casserole 

with copper bottom of 

18 Turbo Tube 1 No. 

19 Aluminium Foils 1.02 kg/kg content in 


20 Eco-Friendly Refrigerant Gas Net to net 

21 Syncronous Motor 1 No. 

22 Powder Paint Within 0.5% of FOB 


product 

1 No. 1 Aluminium Foil Formed: 

a) Rectangular/Square Grid 1.07 Sq.ft./Sq.ft. 


b) Round Grid 1.07 Sq.ft./Sq.ft. 


2 CRCA Sheet 1.10 kg/kg content in 

export. 

10000 Nos. 1 Stainless Steel Capillary 

Tubes/Wires 30G-16G size 

2 Grinding Wheel 600-1000 Grit 

size 

3 Glass Beads 1 kg 

1 kg 1 C R Stainless Steel Sheets/Coils 

AISI 304 

C157 


export. 

0.05 No. 



different sizes 2 Copper Sheets 2 MM 1.05 kg/kg content in 


C818 Stainless Steel Collar for 

electric lamps 

C819 Stainless Steel Cutlery 

with or without handle 

irrespective of what 

material the handle may 

have been ma de of. 

C820 S.S. Fabricated/Welded 

Pipes/Tubes 

C821 Stainless Steel Fabricated 

Tower Packing 

C822 Stainless steel FJ-500 

Food Jar with 

Polypropylene cup & 

stopper 

C823 Stainless Steel Frypan 


1 MT 1 Stainless Steel Strips of relevant 

gauge 

1 Kg 1 Non-Magnetic Stainless 

Steel/Magnetic Stainless Steel 

(only relevant grade of stainless 

steel to be allowed) 

2 Misc.Items: 

Die-Steels & HSS cutting tools, 

Coated abrasive cloth belts, 

brushes & Wheel, Non-woven 

cloth pads, wheels & brushes 

(both impregnated & non- 

impregnated), Sisal Fibre and 

Sisal Buffs & Bonded Emery 

Grinding wheel 

1 MT 1 Stainless Steel 

Plates/Sheet/Strips/Wide Coils of 

relevant grade & specification 

1 MT 1 Cold Rolled Stainless Steel Wide 

Coils of relevnt grade in various 

thickness 


in export 

1.40 Kgs 

CIF value Limited to 

5% of FOB value 

1.10 MT 

1 Kg. 1 Stainless Steel Sheet 0.89 Kg 

2 Polypropylene 0.081 Kg 

3 Silicon rubber for 'O' ring 0.015 Kg 

4 Natural rubber 0.011 Kg 

5 Printed Carton boxes Net to net 

1 kg 1 Stainless Steel Sheets 

conforming to AISI 304 


in the of export 

product. 




export product

C824 Stainless Steel Hospital 

Wares (Other than those 

covered by Sl.No 825 ) 

C825 Stainless Steel Hospital 

Wares 

(Rectangular/Square with 

straight edges) 

C826 Stainless Steel Kitchen 

Sinks. 

C827 Stainless Steel Knives of 

various sizes 

C828 Stainless Steel Pressure 

Cooker with Copper 

Bottom/ Capsuled 

Bottom (Sandwich 

Bottom) of different sizes 

C829 Stainless Steel safety 

razor Blades 

1 kg 1 Magnetic/ Non Magnetic 

Stainless Steel Sheets/Coils (only 

relevant material and grade of 

Stainless Steel to be allowed) 

1.30 kg 


Die Steel & HSS Cutting Tools, 

CIF Value Limited to 

5% of FOB Value 

C158 


brushes & wheels, 

Non - woven cloth pads, wheels 

& brushes (both impregnated & 

non - impregnated), 

Sisal Fibre & Sisal Buffs & 

Bonded Emery Grinding Wheels 

1 kg 1 Magnetic/Non/magnetic Stainless 

Steel Coils/Sheets (only relevant 

material and grade of stainless 

steel to be allowed) 

1.125 kg 


Die Steel HSS Cutting Tools, 





Non-woven cloth pads, wheels & 

brushes (both impregnated & 

non- impregnated, 


1Kg. 1 

e)Bonded Emery Grinding 

Wheels 

Stainless Steel Sheets/Wide Coils 

of relevant grade 

1 kg 1 Stainless Steel Sheet/Wild Coil 

AISI 420 

1.45Kgs. 

1.125 Kg./Kg. 


product. 

2 Polypropylene 1.05 Kg./Kg. content 

in export. 



1 Million 

(double edge 

blades) 



2 Copper Sheets 2 MM 1.05 kg/kg content in 


1 Cold Rolled Medium/ High 

Carbon Martensitic Stainless 

Steel Strip in Coils (thickness: 

0.10 +/- 0.005mm, width: 

22.38+0.02/-0.00mm 

OR 

1 Cold Rolled Medium/ High 

Carbon Martensitic (Semifinished) 

Stainless Steel Strips in 

coils (Thickness: 0.8-0.9mm, 

width: 310-340mm) 

OR 

Hot Rolled Medium/ High 

Carbon Martensitic Stainless 

Steel Strip in coils (Thickness: 

3.3-3.5mm, Width: 310-340mm) 

988 Kgs. 

1295 kgs 

1522 kgs

2 Cellulose Film/BOPP Film 

(Wrapper for packing) 

3 Hanging Cards (20 tucks in a 

card) 

C159 

40 kgs 

10500 Nos 

4 Tucks (5 blades) 210000 Nos 

5 Vydax/Krytox 0.700 Kg 

6 Alumina Abrasive Grinding 

Wheels (OD 205 mm Maximum 

x ID 55 mm Minimum x Width 

130 mm Maximum) 

2 Pcs 

Note.1. Import of handle may also be allowed on net to net basis with accountability clause where the 

product is exported alongwith the handle. 

C830 Stainless Steel Saucepan 








C831 Stainless Steel Seamless 

Tubes/Pipes (Cold Finish) 

C832 Table, Kitchen & other 

household articles made 

of Stainless Steel with or 

without handle/ Iid/ 

antiskid gasket 


material the handle/Iid/ 

antiskid gasket may have 

been made of (other than 

those covered under the 

SION C-833) 

C833 Table, Kitchen & other 

household articles made 

of Stainless Steel with or 

without handle/ Iid/ 

antiskid gasket 


material the handle /Iid 

antiskid gasket may have 

been made of 

(rectangular/ square with 

straight edges) 

C834 Stainless Steel Vacuum 

Flask 

1 MT 1 Seamless Stainless Steel 

Tubes/Pipes (Hot Finished) (OD 

not less than 42 mm) 

2 Consumables viz. Band Saw 

Blades/ Lubricating Oil 

1 kg 1 Magnetic/Non-magnetic 

Stainless Steel Sheet/Coils 

1.35 MT 






Die steel & HSS Cutting Tools, 






brushes (both impregnated & non 

- impregnated), 



1 KG 1 Magnetic/Non-magnetic 

Stainless Steel Sheet/Coils 




Die Steel HSS Cutting Tools, 






brushes (both impregnated & non 

- impregnated), 



1 Kg 1 Stainless Steel Coils AISI 304 

Gr. 0.4 mm to 1 mm Thickness 

2 Getter Pills Net to net 

3 Polypropylene/Polyethylene 

Granules/Moulding Powder 

1.45 Kg/Kg Content 

in Export 


in export 

4 Nylon Belt Net to net 

5 Relevant packing materials 1.05 Kg/Kg content 

in export 

6 Silicon Rubber Net to Net

C835 Stainless Steel Watch 

Straps 

C836 Stainless Steel Water 

Filter of various 

capacities with/without 

candles 

C837 (a) Stainless Steel Welded 

and Cold Drawn Tubes 

and Pipes 

(b) Stainless steel welded 

Corrugated Hose Pipes 

C838 Deleted 

C839 Stainless steel wire rope 

(from wire rod) 

7 Rubber Band (Natural Rubber) Net to Net 

8 Relevant Screw & Nut Net to Net 

9 Vaccum powder 1.05 Kg/Kg content 

in export 

1.0 Kg 1 Stainless Steel Coils 1.20 Kgs 

1 No. 1 Stainless Steel Sheets/Coils of 


1 MT 1 For export item (a) 

Stainless Steel Wide Coils/Strips 


for export item (b) 

Stainless Steel Wide Coils/Strips 


C160 


stainless steel in the 


1.20 MT 

1.25 MT 

1.0 Kg 1 Stainless Steel Rod 1.07 Kg 

2 Dry Drawing Lubricant/ coating .009 Kg 

3 Wire Drawing Soap .008 Kg 

4 Tungsten Carbide Dies .001 No 

5 Wet Drawing Lubricant/ Coating .004 Kg 

6 Diamond Dies/ Compax dies .004 No 

Note:- Import of Items at Sl.No. 5 & 6 shall be allowed only against export of thinner stainless steel wire 

Ropes of size below 1 mm. 

C840 Stapler 

1 kg 1 Cold Rolled Steel Strips/Sheets 1.65 Kg 

2 Spring 0.01 kg 

C841 Deleted 

C842 Steel Clamp (Galvanised) 

C843 Steel Clamp 

(Ungalvanised) 

C844 Steel/ Cops/ Pirn/ Bobbin 

C845 Steel Fire Resisting Filing 

cabinets fitted with 

combination locks 

(consisting of locks, Dail 


Wide Coils 

1.05Kg/Kg content in 


2 Non Alloy Steel Round/Billet 1.10Kg/Kg content in 


3 Zinc 0.04Kg. 

1 Kg 1 Hot Rolled Mild Steel/Stainless 

Steel Sheet/ Strips/ Coils 

2 Non-Alloy Steel /Stainless Steel 

Round/billet 


of relevant steel in 



of relevant steel in 


1 Kg 1 Carbon Steel Tubes/Pipes 1.05 kg/kg content of 

Steel Tube / Pipes in 


2 ABS Granules / Resin 1.05 kg/kg content of 

ABS in the export 

product 

3 CRCA Steel Sheet/Strips. 1.15Kg/Kg contentof 

Steel Sheet in the 


360 Nos 1 Combination Locks (consisting 

of Locks, Dail and Dial Rings) 

net to net

and Dial Rings) 

C846 Steel flexible Tubes/ Pipes 

in sizes ranging from 1/2" 

1 kg 1 Low carbon H.R. Defective 

sheets/ coils 

C161 

1.0168 kg 

to 3" (Galvanised) 2 Zinc 0.04 kg 

C847 Steel folding Bed Nickel 

plated/ Painted 

C848 Steel Gate Corner - 

Galvanised 

1 MT 1 CR Steel strips/ coils seconds/ 

defectives 

776 kg 

2 MS Wire/Wire rods 175 kg 

3 Spring Steel 87.5 kg 

4 Nickel (for Nickel plated item) 

OR 

7.757 kg 

4 Epoxy/ Polyester Paints (For 

painted items) 

7.98 kg 

1 MT 1 HR Coils/Sheets 1.05 MT/MT content 

in export. 

2 Zinc 4% of Net weight of 

steel galvanised. 

C849 Steel Hinges - Bar Type 1 kg 1 MS/Non-Alloy Steel Rounds/ 

Bars/Wire Rods 

1.24 kgs 

C850 Steel J. Belt - Galvanised 1 MT 1 Non-Alloy Steel Rounds 1.05 MT/MT content 

in export. 



C851 Steel pegs 

1 No. 1 MS Sheet 1.267 kg/Kg content 


2 MS Wire rod 1.10 kg/Kg content in 


3 MS Round 1.750 kg/Kg content 


4 Zinc for plating 1% of the net export 

weight to be plated 

C852 Steel Safes fitted with 

combination locks 

(consisting of Locks, Dail 

and Dial Ring) 

150 Nos 1 Combination locks (consisting 

Locks, Dail and Dial Rings) 

C853 Steel Screw 1 kg 1 MS Wire Rod 

OR 

M.S.Wire 

C854 Steel Truss Tightner - 

Galvanised 

C855 Steel Weld Mesh 

C856 Steel Stranded wire 

C857 Surgical Blades made of 

High Carbon Steel 

(Carbon 0.6% and above 

by wieght) 

net to net 

1.12 kg 

OR 

1.08Kg. 

1 MT 1 HR Coils/Sheets 1.05 MT/MT content 

in export. 



1 kg 1 M.S. Wire 1.02 kg/kg content in 


2 Zinc 4% of weight of Steel 

to be galvanised. 

1 kg 1 a) MS Wire Rod 

OR 

1.05 kg. 

1 b) Steel Wire of Relevant Grade and 1.02 kg. 

dia 

1 MT 1 Cold Rolled High Carbon Steel 

strips unhardened and 

untempered (carbon 0.6% and 

above by weight) 

2.4 MT 

C858 Surgical Blades made of 1 MT 1 Cold Rolled Bright Finish 

Surgical Stainless Steel Strips or 

2.75 MT


C859 Suture Needles 

C860 Table Pencil Sharpener 

C861 TEE Hinges 

(Painted/Zinc Plated) 

C862 Tension Band 

C162 


1 Kg 1 Stainless steel wire (Surgical 

Needle wire) AIS-420 series 

2 HSS Twist Drills (Micro Pivot 

Drills) 


in export 

5 Nos./kg of Suture 

Needles 

100 Nos. 1 ABS Moulding Powder/Granules 1.05 kg/kg content in 


2 Polyacetal Moulding 




3 SAN Moulding Powder/Granules 1.05 kg/kg content in 


4 Polycarbonate Granules 1.05 kg/kg content in 


5 Relevant Gear Shape Cutter Net to Net 

1 kg 1 MS/HR Sheet/Coil/Strip 1.25 kg/kg content in 

export 

2 M S Wire Rod 1.05 kg/kg content in 

export 

3 Zinc 

OR 


Hinges to be Plated 

Paint 0.15 kg/kg weight of 

Hinges to be Painted 


Coils 

0.993 kg 

2 Zinc 0.075 kg 

C863 Tiller Left Hand or Right 1 kg 

Hand 


C864 Tips for Ball Pen Refills 

of relevant materials of 

10 Lakh 

Nos. 

1 Brass Scrap 1.075 Kg/Kg content 

in export 

Balls. 2 Stainless Steel Balls/Ceramic 

Balls/ Tungsten Carbide Balls 

1020000 Nos 

C865 Deleted 

C866 Tower Bolts 

1 No. 1 CRCA Sheets Second/Prime 

Grade 

1.10 kg/kg net 


product 

2 Low Carbon Wire Rod 1.05 kg/kg net 


product. 

3 Protective Paint or Zinc for 2% of the weight of 

coating 


C867 Tower Crane Type 

E1/13B 

1 No. Components/Parts related to the 

export product : 

1 Electric Supply 160 A 1 No 

2 Electric Panel (control Panel) 1 No 

3 Complete Cab 1 No 

4 Complete Slewing mechanism 1 No 

5 4T Safety Device 1 No 

6 Complete Hoist Winch 1 No 

7 Trolley Winch 1 No 

8 Complete Travelling 1 No 

9 Electrical Extension (Either 15M, 

30 M, or 50 M) 

1 No

C868 Tower Crane Type 

F25/26C similar to 

FO/23B 

C869 Track Wheel 

C870 Transducer 

10 Hydraulic Unit with seperate 

Hyd. Oil 60 Ltrs 

C163 

1 No 

11 Hydraulic Jack (Cylinder) 1 No 

12 Cable Winder 1 No 

13 Wire Rope 7.5 mm 150 Mtrs 

14 Wire Rope 10 mm 250 Mtrs 

15 Fish Plates 4 Nos 

16 Fish Plates Bolts Net to Net 

1 No. Components/Parts related to the 

export product : 

1 Electric Supply 160 A 1 No 

2 Complete Hoist winch 1 No 

3 Trolley Winch 1 No 

4 Complete Cab 1 No 

5 10T Safety Device 1 No 

6 Electric Cable Set 1 No 

7 Complete Slewing Mechanism 1 No 

8 Complete Travelling 1 No 

9 Hydraulic Unit with separate 

Hyd. Oil 60 Ltrs 

1 No 

10 Hydraulic Jack (Cylinder) 1 No 

11 Cable Winder 1 No 

12 Electric Extension (either 15 M, 

30M or 50M) 

1 No 

13 fish Plates 200 Nos 

14 Wire Rope 7.5 mm 150 Mtrs 

15 Wire rope 14 mm. 745 Mtrs. 


Coils 

0.695 kg 


3 Zinc 0.040 kg 

1 No. 1 Spacer Net to Net 

2 Springs Net to Net 

3 Stem Net to Net 

4 Retaining Ring Net to Net 

5 Nut Net to Net 

6 Copper Tube Net to Net 

7 Tube Net to Net 

8 Screw Net to Net 

9 Clip Net to Net 

10 Push Button Net to Net 

11 Bellows Net to Net 

12 Diaphragm Net to Net 

13 Wire Net to Net 

14 Stud Net to Net

C871 Tubular Poles/ 

Accessories i.e. Cross 

Arms, Tussing Tackle, 

Stay Set, Flag Arm, 

Anchor Bolt, Holder, 

Arrestors 

C872 Turn Buckle 

C873 Single/Twin type shaving 

system Disposable Razor 

Blades 

(single/double/triple 

blades)with/without 

Lubra exported either 

with fixed handle or 

handle and magazine 

separately in different 

types of packings 

15 SS Hex Bars 0.07 Feet 

16 Rod 0.46 Feet 

17 Coil 0.026 Feet 

18 CRCS Strip 0.084 Lbs. 

19 SS Strip 0.093 Lbs. 

20 SS Sheet 0.0146 Lbs. 

1 MT 1 ERW MS/Carbon Steel 

Pipes/Tubes 

OR 

1 MS/Carbon Steel HR Steels/ 

Coils/ Prime/ Seconds/ 

Defectives 

2 MS/ Carbon Steel/ ENTA Round/ 

Rods and Bars 

C164 


in export 


in export 


in export 

3 Welding Rods Upto 2% of FOB 

Value 


Coils 

1.050 kg 

2 Zinc 0.040 kg 

1 Nos 1 Cold Rolled Stainless Steel Strips 1.75 kgs/kg content 


2 ABS/Styrene Butadiene Co- 

Polymer Q-Resin (for handle, 

seat, top cap and spacer 1 & 2) 

3 High impact/ GP Polystyrene (for 

Protective Cap/Magazine) 

4 Polyox Coagulant 

5 Polyox of relevant grade 

6 GP Polystrene 

7 Polyterafluoroethylene 

8 Grinding Wheel 

9 Slitting Wheel 

10 Krytox / Dry Film 

11 Aluminium Strips/Coil/Sheet (for 

spacer/clamps) 

1.10 kgs/kg content 






12 T.P Elastomer for Sleeve 1.10 kg/kg content of 


13 High impact Polystyrene (for Top 

Cap seat & handle) 

14 Brass Strips/ Zinc Mazak (for 

razor head and razor handle rib) 





15 Packing material As per packing policy 

Note: 1. Wherever handles are sought for import separately, the same be allowed as components on net to 

net basis with accountability clause and in such cases the rest of the raw materials will have to be 

accounted for as per the norms above. 

2. Import item No. 4,5, and 6 all the three items together 1.30 kg/kg weight of the Lubra strips in the 


3. Import item No. 7,8,9, and 10 (Consumables)&. CIF value taken together may be restricted to 1% of the 

FOB value. 

C874 Deleted 

C875 Deleted

C876 Deleted 

C877 Deleted 

C878 Deleted 

C879 Deleted 

C880 Twin type shaving system 

Razor/ Razor Handle 

C881 Type Inner/ Outer Ring 

Spiral Wound Gaskets 

C882 U-Bolt 

C883 U-Clamp/C-Clamp. 

C884 Universal Bracket 

C885 Vaccum Flasks of 

Stainless Steel Casing 

1 Million 

pcs.of Razor 

handles 

1 High Impact Polystyrene (for 

Razor Handle) 

C165 

8834 kg 

2 Zinc Mazak/ Brass Strips (for 

Razor rib) 

17080 kg 

3 Brass Strip (for Razor Head) 2400 kg 

1.0 MT 1 Stainless Steel Strips 1.10 MT/MT content 

in export 


2 Zinc 0.035 kg 

3 Nuts Net to net. 


2 Zinc 0.035 kg 


Coils 

0.870 kg 


1 No. (1000 

ml) 

3 Zinc 0.050 kg 





3 Chemicals for Glass Shell: 

a) Borax 80 gms. 

b) Selenium 2 gms. 

c) Arsenic 2 gms. 

d) Soda Ash 100 gms 

e) Sodium Silico Fluoride 25 gms. 

f) Silver Nitrate 1.5 gm 

g) Caustic Soda 25 gms. 

h) Silicon Oil 0.5 gm. 

C886 Valve for LPG Cylinder, 

Hand wheel type, made of 

Brass 

1 kg 1 Brass Scrap 1.12 kg 

C887 Vertical Arm 


Coils 

1.219 kg 

2 Zinc 0.085 kg 

C888 Stainless Steel Washers of 

different grades. 

C889 Deleted 

C890 Watch Dials made out of 

Nickel Silver Brass Strip 

1 kg 1 Stainless Steel Coils/Sheet/Sheet 

Cuttings/Strips - both prime and 

seconds of relevant grade. 

1000 Nos 1 Nickel Silver Brass Strip 

OR 

1 a) i ) Semi-finished Watch Dials 

(Pre-punched blanks made out of 

1.65Kgs. 



Net to Net

1 a) 

Brass / Nickle Silver with special 

base finish-Gents, Boys and 

Ladies 

OR 

ii ) Semi-finished Watch Dials 

(Pre-punched blanks made out of 

Brass / Nickle Silver with mother 

of pearl- (MOP Discs)Gents, 

Boys and Ladies 

OR 

Net to Net 

1 a) iii ) Semi-finished Watch Dials 

(Brass/Nickle Silver Strips) 

containing semi - punched brass 

circles Gents, Boys and Ladies 

Net to Net 

2 Dial Feet 2280 Nos. 

3 Appliques 

OR 

3 (a)(i)Special Appliques (prepunched 

mother of pearl - (MOP 

Discs) - made out of natural seashell 

- Gents, Boys and Ladies 

OR 

3 (a)(ii)Special effects sheets made 

out of carbon fibre 

C166 

12210 Nos. 

Net to net. 

4 Lacquers 600 gms. 

5 Printing Ink 67 gms. 


Grinding wheel/Abrasive/Polipla 

Abrasive/Electroplating Salt & 

Surface Treatment 

Chemicals/Nickel Sulphite/Silver 

Brightener/Ad Salt/Twist Drills 

& Cutting Tools & Cleaning 

Brushes. 

1.3 Sq.mtr./ Sq.mtr. 


product. 



C891 Water meters 1 kg 1 Brass Scrap 1.075 kg 

C892 Wear Sleeves made out of 1 MT 

Bright Mild Sheet. 

1 EDDG Bright Mild Steel 1.30 MT 

C893 Welded Steel Pipe 

Fittings made from Steel 

Plates/Sheets 

1 MT 1 Relevant Alloy/Non-Alloy Steel 

Plates/Sheets 

1.30 MT 

C894 Deleted 

C895 Window Stay (made of 

Steel Sheet) 

1 MT 1 H.R.Non Alloy Steel 

Sheet/Coils/Strips. 

1.05 MT 

C896 Steel Wire Nails 1 kg 1 M.S. Wire 1.05 kg 

C897 Wood screws made of 

steel, self colour or plated 

1 kg 1 Carbon steel wire rod 1.400 kg 

C898 Wood to steel Adapter 1 kg. 1 Hot Rolled MS Sheet/ Strips/ 

Coils 

1.060 kg 

2 Zinc 0.065 kg 

C899 Y-Arm made of Steel. 

C900 Zinc Plated (Galvanised) 

Beam Clam 3/8" to 1/4" 


Coils 

1.219 kg 

2 Zinc 0.085 kg 

1 MT 

Connectors 

1 H.R. Coil/Sheet 2 mm to 3.15 

mm 

1.35 MT

C901 Zinc plated (Galvanised) 

conduit Hanger 


Metallic Connectors 

(Regular "C" Type & 

Insu- lated) Size 1/4" to 

4" 


Romex Connectors 1/2" 

to 1-1/2" 

C904 Zinc Plated (Galvanised 

Steel Locknuts (Blanked/ 

Punched) Size: 

a)1/2" to 4" Regular 1/2" 

to 2" UL/CSA 

b)5" and 6" Regular and 

2-1/2" to 6" UL/CSA 

c)1/2" to 1" Extruded 

type 

C905 Aluminium Oxide Resin 

Disc (Coated Abrasive): 

4" Dia x 5/8" Centre Hole 

(containing Al. Oxide 

grains Min. 1.1 kg) 

C906 Aluminium Oxide Resin 

Disc (Coated Abrasive) 

5" Dia x 5/8" Centre Hole 


grains Min. 1.4 kg.) 

C907 Oxide Resin Disc (Coated 

Abrasive Aluminium) 6" 

Dia x 7/8" Centre Hole 


grains Min. 2.74 kg.) 

without 

Screw. 

2 Zinc 0.008 MT 

1 kg 1 HR Coil/ Sheet 1 MM to 2 MM 

thick 

1No. 1 ERW Steel Tube OD 21.31 mm 

to 121.2 mm 

OR 

HR Steel (Non- alloy) Coil/ 

Sheet 1.6 mm to 5 mm 

1 MT 

Connectors 

without 

Screw 

C167 

1.067 kg 



OR 

1.49 MT/MT/Kg 


product. 

2 Zinc 0.8% of the weight of 


3 Machine Screws 

OR 

Net to Net 

Bolt 

Net to Net 

1 C.R. Coil/Sheet 1 mm to 2 mm 1.75 MT 

2 Zinc 0.008 MT 

1 MT 1 For export item ( A) 

(I) H.R. Coil/Sheet 2 mm to 5 

mm 

(II) Zinc 

(III) Alloy Steel Bars of AISI D- 

3 OR AISI M-2 & equivalent Dia 

upto 350mm. 

2 For export item ( B) 

(I) MS Plate 10mmto 16mm 

(II) Zinc 


3 or AISI M-2 & equivalent Dia 

upto 350mm. 

3 For Export item ( C) 

(I) CR Coil/sheet 1mm to 2mm 

(II) Zinc 


3 OR AISI M-2 & equivalent Dia 

upto 350mm. 

3.430 MT 

0.008MT 

CIF value resctricted 

to 2% of the FOB 

value of the export ., 

3.430 MT 

0.008MT 




3.40 MT 

0.008MT 




100 Nos. 1 Abrasive Grade Vulcanised Fibre 1.3135 kg (quantity 



2 Aluminium Oxide grains 

(Synthetics) 

1.21 kg 

100 Nos. 1 Abrasive Grade Vulcanised Fibre 1.854 kg. (quantity to 

be accounted for in 



(Synthetics) 

1.54 kg 

100 Nos. 1 Abrasive Grade Vulcanised Fibre 3.0906 kg (quantity 




(Synthetics) 

3.017 kg

C908 Oxide Resin Disc (Coated 

Abrasive Aluminium) 7" 

Dia x 7/8" Centre Hole 


grains Min. 3.2 kg) 

C909 Ball/ Roller Thrust/ 

clutch release/ spherical 

plain Bearing having 

height more than 1" but 

not exceeding 2" 

C910 Ball/ Roller Thrust/ 

clutch release/ spherical 

plain Bearing having 

height more than 2" but 

not exceeding 5" 

C911 Ball/Roller Thrust/ clutch 

release/ spherical plain 

Bearing having height 0- 

1" 

C912 Bench Grinder 6" 

C913 Brazed Carbide Tools 

C914 Brazed Tools Carbide 

Tips 

C915 Cold Rolled Non 

Alloy/Alloy Steel 

Hardened and Tempered 

Saw Blades/Handsaw 

Blades 

C916 Pneumatic tool 

C917 Cutting Tools - Single 

point of High Speed Steel 

100 Nos. 1 Abrasive Grade Vulcanised Fibre 3.5850 kg. (quantity 




(Synthetics) 

3.52 kg 

1000 Nos 1 Ball bearing grade steel 

tubes/Bars/Un-machined Forged 

Rings of SAE 52100/ DIN 100 

Cr M07 or equivalent grade 

2300 kgs 

2 Steel balls of SAE 52100 or 

equivalent grade 

20200 Nos 

3 Brass Scrap 194 kgs 

4 Misc. Items: Super precision 

fibre cage bearing, grinding 

spindle and grinding wheel 


tubes/Bars/Un-machined forged 



2 Steel balls of SAE 52100 or 

equivalent 

C168 


Value 

3340 kg 

17574 Nos 

3 Brass Scrap 2000 Kg 

4 Misc. Items: Super precision 

fibre cage bearing, grinding 

spindle and grinding wheel 


tubes/Bars/Un-machined Forged 



230 kgs 

2 Steel Balls of SAE 52100 or 

equivalent grade 

3 Super precision fibre Cage 

bearing, grinding spindle and 

grinding wheels 

1 kg pig iron 

content 



value 

15150 Nos 

2 MS Round 1.17 kg 


Value 

100 Nos 1 Tungstons Carbide Tips/Inserts 102 Nos. 

2 Brazing Foil 0.0314 Kg 

1000 No 1 Tungsten Carbide Tips & inserts 

in various shapes & sizes 

2 Carbon steel bars/ 

Rounds/Squares/ Flats 

net to net 

3 Brazing Foil 0.29 kg 

1 MT 1 Hot Rolled Alloy/Non Alloy 

Steel Strips/Wide Coils of 


1.1 kg/kg of wt of 


1.20 MT 

1 No 1 Cylinders 1 No. 

2 VC Washer 1 No. 

3 Latch Bushing 1 No. 

1 kg 1 High Speed Steel (Cobalt Grade) 1.05 kg

(Cobalt Grade) 

C918 Cutting tools - Single 

point of High Speed Steel 

(Non-cobalt Grade) 

C919 Deleted 

C920 Cutting Tools - Multiple 

point of high Speed Steel 

(Non-cobalt Grade)/Tool 

Steel 

C921 Cutting Tools - multiple 

point of High Speed steel 

1 kg 1 Non-cobalt bearing high speed 

steel (AISI M2 grade of High 

Speed Steel) 

C169 

1.05 kg 

1 kg 1 High speed steel/ (non-cobalt 

grade)/ Tool Steel 

1.33 kg 

2 Milling Cutter for a cif value upto 

2% of the fob value 

of the export product. 

1 kg 1 High Speed Steel (Non -Cobalt 

Grade)/Tool Steel 

1.33 kg 

(Cobalt Grade)/Tool Steel 2 Milling Cutter for a cif value upto 



C922 Electric Discharge 

Machine(EDM) Wire 

C923 Endless Coated Abrasive 

Belts/ Aloxide Cloth 

Belts/Silicarb Cloth Belt/ 

Zirkon Cloth Belt Grit 

Ranges 100-220 

1 MT 1 Copper Wire Bar/ Cathode 1.10 MT/MT content 


2 High Grade Zinc Ingot 1.10 MT/MT content 


3 ABS - Styrene Group Upto 2% of the FOB 


4 Expanded Polyesterin Upto 2% of the FOB 


100 Sq. mtr. 

(106.5 kgs 

+/- 2%) 

1 Drill Cloth made of Cotton 111 Sq.mtr. 

2 Aloxide Grain 

OR 

35.66 kgs 

Silicarb Grain 

OR 

25.44 kgs 

Zirkon Grain 

35.66 kgs 

3 Phenol 17.40 kgs 

4 Formaldehyde(37%) 15.82 kgs 

5 Belt Jointing material consisting 

of PU Resin, Hardener, Splicing 

Tape 

This norm shall also be applicable to exports made in "Cloth Roll" form. 

C924 Endless Coated Aloxide 

Cloth Belts/Silicarb Cloth 

Belt/ Zirkon Cloth Belt 

Grit Ranges 24-30 

100 Sq. mtr. 

(245 kgs +/- 

2%) 





OR 

134.89 kgs 


OR 

112.25 kgs 

Zirkon Grain 

134.89 kgs 





Tape 




100 Sq. mtr. 

(230 kgs +/- 

2%) 



1 Drill Cloth made of Cotton 111 Sq.mtr.




OR 

119.56 kgs 


OR 

96.73 kgs 

Zirkon Grain 

119.56 kgs 





Tape 






100 Sq. mtr. 

(152 kgs +/- 

2%) 

C170 





OR 

64.38 kgs 


OR 

53.74 kgs 

Zirkon Grain 

64.38 kgs 





Tape 





Grit Ranges 240 and 

above 

C928 Fix Perfect Inserts for 

Milling and Turning 

C929 Gear cutting tools of 

cobalt bearing high speed 

steel 

C930 High speed steel square, 

Rectangular and Round 


Grade Tool Bits of Cross 

Sectional Area more than 

150 Sq.mm. 

C931 Industrial Diamond Prod. 

Diamond Grinding 

Wheels/ diamond file and 

100 Sq. mtr 

(89 kgs +/- 

2%) 





OR 

21.75 kgs 


OR 

20.96 kgs 

Zirkon Grain 

21.75 kgs 





Tape 



1 kg 1 Tungsten Carbide Powder 1.20 kg/kg of 

Tungsten Carbide 

Powder content in 


1 kg 1 High speed steel having cobalt 

content less than 10% 

1.80 kg 

1 MT 1 High Speed Steel Cobalt 

Bearings & non-Cobalt Bearings 

Square, Rectangular & Round 

Bars 

1.15 MT 

1 Industrial Diamond Powder Net to net( upto the 

maximum of 20% of 

fob value)

tools 

C932 Industrial Diamond Prod. 

Diamond Tools/ Diamond 

dressers/ Diamond tools 

bits 

C933 Industrial Diamond/CBN 

Grinding Wheels 

1.00 ct. 1 Industrial Diamond 1.100 ct 

1 Kg 1 Synthetic Industrial diamond 

powder or Borazone CBN 

Abrasive. 

2 Resin bonding mixture 

3 Matrix powder 

Note : 1.DIAMOND IMPREGNATED SEGMENTS: %age of raw material requirement on net weight of 

product Resultant. 

2. Import item Nos. 1,2 and 3&... CIF value of three items taken together restricted to 35% of FOB value. 

C934 ISO Indexable Inserts 

For Turning, Milling and 

Drilling 

C935 NC/CNC Wire Cut 

Electric Discharge 

Machine 

C936 Organic Grinding 

Wheels: All other wheels 

Grain Bond Ratio 75:25 


Wheels: Depressed 

Centre Wheels Grain 

Bond Ratio 75:25 


Wheels: Hot Press 

Wheels for Billet 

Grinding Grain Bond 

Ratio 75:25 


Wheels: Non-Reinforced 

Cutting off wheels Grain 



Wheels: Nut Inserted 

wheels Grain Bond Ratio 

88:12 

1 kg 1 Tungsten Carbide Powder/ 

Tungsten Carbide Mixed Powder 

C171 

1.15 kg/kg of 

Tungsten Carbide 

Powder content in the 


1 No. 1 Ball Screw Support Bearings Net to Net 

2 Stepper Servo DC Motors/DC 

Motors 

Net to Net 

4 Limit Switch Net to Net 

5 Electro Magnetic Clutch Net to Net 

6 High Pressure Pump Net to Net 

7 LM Guides Net to Net 

8 Ball Screws Net to Net 

9 Crossed Roller Guides Net to Net 

10 Mosfets Net to Net 

11 LED Displays Net to Net 

12 Integrated Circuits Net to Net 

13 Potentiometers Net to Net 

1 kg 1 Synthetic Aluminium 

Oxide/Silicon Carbide,Resin 


Oxide/Silicon Carbide, Resin 


export 


export. 

2 Glass Fibre Disc 3.15 Nos./depressed 

centre wheel export 


Oxide/Resin, Iron Pyrite, 

Chopped Glass Strands 






export 


export 


export


Wheels: Point & Fluting 



Wheels: Razor Blade 

Grinding wheel Grain 



Wheels: Reinforced 

Cutting off wheel Grain 



Wheels: Snagging wheels 


C945 PCB Drills made from 

Solid Tungsten Carbide 

Blanks/ Rods of Diameter 

1.51 mm to 6.50 mm 

C946 PCB Router made from 

Solid Tung- sten Carbide 

Blanks 

C947 Permanent Magnetic 

Chuck 

C948 Plastic 

Injection/Extrusion 

Mould/Dies/Cavities/Pun 

ches/Housing/Inserts 

made of Alloy Steel/Tool 

Steel 

C949 Pneumatic Revetting 

hammer 

C950 Resin bonded diamond 

wheels (Quantity of 

diamond powder 

contained in export 

Product should be 

mentioned) 

C951 Saws/ Segments made 

from high speed steel 

strips/ sheets including 

Bimetal & Flexible 

C952 Screw Drivers (Nickel 

plated) 

C953 Slitting cutters made of 

steel variety-x 

1 kg 1 Synthetic Aluminium Oxide/Iron 

Pyrites 

C172 


export 

1 kg 1 Silicon Carbide, Resin 1.15 kg/kg content in 

export 




export 

2 Glass Fibre Disc 2.10 Nos./re-inforced 

cutting of wheel 

export 



1000 Nos. 1 Solid Tungsten Carbide Blanks 1000 Nos. 

2 Relevant Consumables: 

(Fluit Grinding Diamond 

Wheels) 

1 No. 1 Solid Tungsten Carbide Blanks 

Dia 3.25+/-0.25x length 38.3+/- 

0.5mm 

2 Diamond Grinding Wheels Dia 

150mm (Consumables) 

1 No. 1 Permanent Magnet Strontium 

Ferrite Grade 

1 kg 1 Relevant Alloy Steel/Tool 

Bars/Rods/Flats/Rounds/Plates 


export 


Value. 

1.10 Nos. 

1 No. per 1350 Nos. 



export. 

1.25 kg 

1 No 1 Cylinders of reqd specification 1 No. 

1 kg 1 Industrial Diamond Powder Net to Net 

1 kg 1 High speed steel and Bimetal 

strips/sheets 

2 MISC. ITEMS:- Millingcutters, 

Settingwheels/Setting Hammers, 

Paints, Powder for Powder 

Coating, Dies & Punches, 

Cleaning Oil Berkatekt 

(Chemical), Tools & Dies. 

1.20 kg 

CIF Value restricted 

to 2% of FOB value. 

1 kg 1 Non-Alloy Steel rounds 1.10 kg/Kg content in 


2 Nickel 0.0097 kg/ kg of steel 


1 kg 1 Steel of variety-x 2.15 kg

C954 Vetrified Grinding 

wheels : Mounted Points 

Grin Bond Ratio 85:15 


Wheels: All other 

Vetrified Grinding 

Wheels Grain Bond Ratio 

85:15 


Wheels: Ball Wheels 



Wheels: Floor Polishing 

Blocks, Rubbing Bricks, 

Finishing Stone, 

Segments Grain Bond 

Ratio 85:15 


Wheels: Honing 

Stone/Super Finishing 

Stones Grain Bond Ratio 

85:15 

C959 Welded Construction 

tools made of High speed 

steel in combination with 

other steels namely Twist 

drills/ Reamers/ 

Threading tools/ End 

mills/ Milling cutters/ 

Taps 

C960 Above 95 CC and upto 

175 CC 4 Stroke 

Motorcycle in 

CKD/SKD/CBU 

Condition. 


Oxide/Silicon Carbide 



1 kg 1 Silicon Carbide Grain 0.448 kg 

2 Synthetic Aluminium Oxide 

Grain 





1 kg 1 High speed steel (non-cobalt 

grade) 

OR 

C173 


export. 


export. 

0.242 kg 


export. 


export. 

1.25 kg 

1 High speed steel (Cobalt grade) 1.25 kg 

1 No. 1 Cold Rolled Steel 

Sheets/Strips/Coils in Thickness 

Between 0.5 mm to 3.0mm 

42.50 kg 

2 Cold Rolled Coated Steel 


Between 0.8 mm to 1.0 mm 

5.03 kg 

3 Hot Rolled Steel 


Between 3.0 mm to 5.0 mm 

5.891 kg 

4 Commercial Grade Aluminium 

Purity min 99% 

11.762 kg 


6 Copper Cathode/Wire Bars/Rods 0.263 kg 


8 Nickel 0.314 Kg 

9 Polyol 480.00 gms 

10 Isocynate 336.00 gms 

11 Butyl Rubber 453.00 gms 

12 Relevant Synthetic Rubber 

(NBR/SBR) 

145.75 gms 

13 Carbon Black 516.78 gms 

14 Polyvinyl Chloride (PVC) 801.15 gms

C174 

Granules 

15 Polypropylene Granules 583.80 gms 

16 High Density Polyethelene 

Granules 

180.60 gms 

17 Rexine 0.67 Sq.Mtr. 

18 Paints 3.40 Ltrs. 

19 Air Filter Net to net. 

20 Auto Light Set Net to net. 

21 Battery Net to net. 

22 Bearing Race Set Net to net. 

23 Bearing Set Net to net. 

24 Boss Net to net. 

25 Brake Cam Set Net to net. 

26 Bushing Set Net to net. 

27 Camshaft Valve Net to net. 

28 Carbuiretor Assembly Net to net. 

29 Catalytic Converter Net to net. 

30 Chain and Sprocke Set Net to net. 

31 Change Drum Assembly Net to net. 

32 Charging Regulator Assembly Net to net. 

33 Clutch Asly Components Net to net. 

34 Control Cable Set Net to net. 

35 Conyto Lever and Housing Set Net to net. 

36 Crankshaft Assembly Net to net. 

37 Cylinder Liner Net to net. 

38 Decal Set Net to net. 

39 Disc Brake Component Net to net. 

40 Filter Net to net. 

41 Fork Shift Set Net to net. 

42 Front Fork Net to net. 

43 Front Hub Axle Net to net. 

44 Fuel Tap Assmbly Net to net. 

45 Gear Balancer Wt. Net to net. 

46 Gear Set Net to net. 

47 Guide Chain/Stopper Net to net. 

48 Guide Valve Net to net. 

49 Hardwares Net to net. 

50 Harness Net to net. 

51 Horn Net to net. 

52 Housing Assembly Control Net to net. 

53 Ignition Coil Net to net. 

54 Ignitor Net to net. 

55 Kick Lever Assembly Net to net.

56 Kick Shaft Assembly Net to net. 

57 Lock/Key Set Net to net. 

58 Magneto Net to net. 

59 Needle Roller Bearing Set Net to net. 

60 Nipple Spoke (1 Set =72 Nos.) Net to net. 

61 Oil Pump Assembly Net to net. 

62 Oil Seal Net to net. 

63 Piston Asly (Piston, Rings, Pin) Net to net. 

64 Push Rod Net to net. 

65 Rear Hub Axle Net to net. 

66 Rear Shock Absorber (1 Set = 2 

Nos.) 

67 Rear View Mirror Set (1 Set of 2 

Nos.) 

C175 

Net to net. 

Net to net. 

68 Regulator Voltage Assembly Net to net. 

69 Relay Net to net. 

70 Retainer Net to net. 

71 Retainer Valve Spring Net to net. 

72 Rocker Arm Net to Net 

73 Scr, Diodes and other Electronics 

Components 

Net to Net 

74 Screw Net to net. 

75 Shaft Transmission Input Net to net. 

76 Shaft Transmission Output Net to net. 

77 Shift Rod Net to net. 

78 Spark Plug Net to net. 

79 Speedometer Assembly Net to net. 

80 Spoke (1 Set = 36 Nos.) Net to net. 

81 Spring Engine Valve Net to net. 

82 Starter Clutch Components Net to net. 

83 Starter Motor Net to net. 

84 Steel Frame Net to net. 

85 Suppressor Cap Net to net. 

86 Tank Cap Assembly Net to net. 

87 Tyres Set Net to net. 

88 Valve Intake & Exhaust Net to net. 

89 Valve Seat (1 Set = 2 Nos.) Net to net. 

90 Hot Dies Steel Blocks, High 

Speed Steel, Inserts, Cutting 

Tools, Grinding Stones, 

Adhesives and Sealants, Steel 

shots 



Note : The item of import and its specification should conform/match with the export product. 


250 CC Motorcycles in 

1 No. 1 CRCA Defective 

Sheets/Coils/Strips 

33.42 kgs 

2 M.S./Carbon Steel Seamless Pipe 20.40 kgs

CBU/ SKD/ CKD 

condition 

3 Natural/Synthetic 

Rubber(SBR/PBR)including 

SBR & V.P. Latex 

4 Paints(Acrylic) 2 litres 

5 PU Foam 2.80 kgs 

6 Needle Bearing (dia 4 x 6 mm) 40 Nos 

7 Bearing (6304) 3 Nos 

8 Bearing (6205) 2 Nos. 

9 Bearing (6303) 1 No. 

10 Bearing (6302) 4 Nos. 

11 Capacitor Discharge Ignition 

(CDI Unit) 

1 No. 

12 Generator Assembly 1 No. 

13 Spart Plug 1 No. 

14 Piston, Piston Ring & Pin 1 No. 

15 Flasher 1 No. 

16 Tail Light 1 No. 

17 Speedometer 1 No. 

18 Headlight 1 No. 

19 H.T. Coil 1 No. 

C176 

53 kgs/100 kgs 

weight of Tyres & 

Tubes separately. 

20 Cables 20 Meters 

21 Reflector 2 Nos. 

22 Indicator 4 Nos. 

23 Filter 1 No. 

24 Lock 2 No. 

25 Automobile Bulb 9 Nos. 

26 Forged Components one No. 

each offollowing:i) 

Engine Sprocket 

ii) Fly Wheel 

iii) Connecting Rod 

iv) Main Shaft 

v) Lay Shaft 

vi) Gear with Hub 

vii) Kick Start Shaft 

viii) Kick Start Quadrant 

ix) Kick Start Lever with Pin 

x) Kick Start Ratchet 

xi) Head Lug 

xii) Steering Lug 

xiii) Clutch Hub 

xiv) Bracket 

27 Cast Components: 

one No. each of following:i) 

Cylinder Barrel

C962 Deleted 


500 CC Motorcycles in 

CBU/ SKD/ CKD 

condition 

C177 

ii) C.C. Wheel 

28 Electric Horn 1 No. 

1 No. 1 CRCA Defective Sheets/ 

Coils/Strips 

42.32 kgs. 

2 MS/Carbon Steel Seamless Pipe 25.30 kgs. 

3 Natural Rubber/Synthetic Rubber 

(PBR/SBR - 1502/1712) 

including SBR latex and VP latex 

4 Paints 2.00 Ltr. 

5 PU Foam 2.80 kgs. 

53 Kg per 100 Kg 

weight of tyres and 

tubes separately 

6 Needle Bearing (Dia 4X6) 40.00 Nos. 

7 Bearing (6305) 3.00 No. 

8 Bearing (6205) 2.00 No. 

9 Bearing (6303) 1.00 No. 

10 Bearing (6302) 4.00 No. 

11 Capacitor Discharge Ignition 

(CDI Unit) 

1.00 No. 

12 Generator Assembly 1.00 No. 

13 Spark Plug 1.00 No. 

14 Piston, Piston Rings & Pin 1.00 Set. 

15 Flasher 1.00 No. 

16 Tail Light 1.00 No. 

17 Speedometer 1.00 No. 

18 Headlight 1.00 No. 

19 H.T. Coil 1.00 No. 

20 Cables 20.00 Mtrs. 

21 Reflector 2.00 No. 

22 Indicator 4.00 No. 

23 Filter 1.00 No. 

24 Lock 2.00 No. 

25 Automobile Bulb 9.00 No. 

26 Forged Components 22.00 Nos. 

27 Cast Components 16.00 kgs. 

28 Electric Horn 1.00 No. 

Note : 1. Import of synthetic rubber shall not exceed 9 Kg out of total quantity of 53 Kg allowed. Out of 9 

Kg of synthetic rubber allowed, the import of VP Latex shall not exceed 0.4 Kg. 

C964 49 CC Moped 

1 No. 1 Raw Material: 

a) Alloy Steel Sheet/Strips/Bars 14.00 kgs. 

b) CRCA Sheet/Coil Strips 35.08 kgs. 

c) HR Coils/Strips 17.28 kgs. 

d) Barss Scrap 1.30 kgs. 

e) Aluminium/Alloy Ingots 5.60 kgs. 

f) MS Rods/Bars 4.50 kgs.

C965 45 CC to 60 CC Scooter 

in CKD/SKD/CBU 

Condition 

2 Chemicals: 

a) Paints 1.00 kg. 

b) Isocyanate 0.35 kg. 

c) Polyol 0.35 kg. 

d) PVC Leather Cloth 0.40 kg. 

e) Nylon Granules 1.00 kg. 

f) HDPE Granules 1.00 kg. 

g) PVC Resin (Paste Grade) 0.5 kg. 

h) Nickle 1.00 kg. 

3 Components: 

a) Small End Bearing Net to Net 

b) Clutch Pulley Bearing Net to Net 

c) Big End Bearing Net to Net 

d) Spark Plug Net to Net 

e) High Tensile 

Nut/Bolt/Screws/Rivets 

C178 

Net to Net 

f) Piston, Piston Ring and Pin Net to Net 

g) Tail Light Net to Net 

h) Flasher/Indicator Net to Net 

i) Head Light Net to Net 

j) Reflector Net to Net 

k) Halogen Bulb Net to Net 

l) Tyres Net to Net 

m) Tubes Net to Net 

1 No. 1 Cold Rolled Prime Steel 

Sheets/Strips/Coils 

2 Hot Rolled Prime Steel 


34.221 kgs 

2.311 kgs 

3 Seamless Steel Tubes 0.073 Mtr. 

4 Aluminium not 

Alloyed/Aluminium Alloys 

5.573 kgs 


6 Copper Cathode/Wire Bar/Rod 0.133 kg 

7 Super Enamelled/Enamelled 

Copper Wire 

0.163 kg 



10 Isocynate 186.000 gms 


12 Synthetic Rubber (NBR/SBR/ 

PBR) 

36.36 gms 


14 Poly Vinyl Chloride (PVC) 

Granules 

1110.110 gms 

15 PolyPropylene Granules 1372.000 gms 

16 High Density Polyethelene 585.900 gms

C179 

Granules 

17 ABS Granules 2513.700 gms 

18 Nylon Granules 99.750 gms 

19 PVC/Artificial Leather Cloth 0.679 Sq.Mtr. 


21 Regulator Assembly Net to net. 

22 Crank Shaft Assembly(without 

Bearings) 

Net to net. 

23 Tyres(1 Set= 3 Nos.) Net to net. 

24 Tool Kit Net to net. 

25 Output Shaft Assembly Net to net. 

26 Carburettor Net to net. 

27 Piston Assembly Net to net. 

28 Clutch Assembly Complete Net to net. 

29 Driving Sprocket Net to net. 

30 Chain Net to net. 

31 Pinion Shaft Assembly Net to net. 

32 Bearing (SKF 6203) or 

equivalent 

33 Bearing (SKF6203.C3) or 

equivalent 


equivalent 

35 Needle Roller Bearing 

(KZK162212) or 

36 Needle Roller Bearing 

(KBK121516) or equivalent 

Net to net. 

Net to net. 

Net to net. 

Net to net. 

Net to net. 

37 Helical Gear Net to net. 

38 Kick Starter Net to net. 

39 Central Bush-brake Drum Net to net. 


41 Front Hub Pin Net to net. 

42 Supressor Cap Net to net. 

43 Bush Net to net. 

44 High TensionCoil Net to net. 

45 Contol Cable Set (1 Set = 4 Nos.) Net to net. 

46 Rear View Mirror Set(1 Set=2 

Nos.) 

Net to net. 

47 Wiring Harness Net to net. 


49 Petrol Cock Assembly Net to net. 

50 Front Suspension Spring Net to net. 

51 Rear Shock Absorber Net to net. 

52 Antidive Link Complete Net to net. 

53 Auto Lamps Set (Bulbs only) (1 

Set = 8 Nos.) 

Net to net.

54 Decal (1 Set = 2 Nos.) Net to net. 

55 Blinker Set (1 Set = 4 Nos.) 

(without bulbs) 

56 Auto Switch Assembly (1 Set = 2 

Nos.) 

C180 

Net to net. 

Net to net. 

57 Throttle Pipe Net to net. 

58 Tail Lamp Assembly (without 

bulbs) 

Net to net. 

59 Spindle Net to net. 

60 Ceramic Magnet Net to net. 

61 Brake Liner Net to net. 

62 Wiring Harness for Stator Net to net. 

63 Front Link Net to net. 

64 Speedometer Net to net. 

65 Steering and Seat Lock & Key Net to net. 

66 E.I.S Assembly (without SCR 

and Diode) 

67 SCR and other Electronic 

Components 

Net to net. 

Net to net. 

68 Diodes Net to net. 

69 Reflector Net to net. 

70 Head Lamp Assembly (without 

bulbs) 

Net to net. 

71 Cylinder Block Net to net. 

72 Solid State AC Flasher Assembly Net to net. 

73 Hot Die Steel Blocks 

74 High Speed Steel 

75 Inserts 

76 Cutting Tools 

77 Grinding Stone 

78 Adhesives and Sealants 

79 Steel Shots 

Note 1. The Item of import and its specification should conform/match with the export product. 

2. Import items mentioned at Sl. No. 73 to 79 are allowed upto 5% of FOB value of exports. 


100 CC Scooter in 

CKD/SKD/CBU 

Condition. 




Sheets/Coils 

33.45 kgs 

2.00 kgs 

3 Seamless Steel Tubes 0.0735 Mtr. 



6.38 kgs 


6 Copper 0.153 kg 


Copper Wire 

0.163 kg 



10 Isocynate 186.000 gms


12 Synthetic Rubber 

(NBR/SBR/PBR) 

C181 

36.36 gms 



Granules 

1110.110 gms 

15 Poly Propylene Granules 1417.000 gms 

16 High Density Polyethelene 585.900 gms 

17 ABS Granules 2513.700 gms 

18 Nylon Granules 99.750 gms 

19 PVC/Artificial leather Cloth 0.670 Sq.Mtr. 



22 Crank Shaft Assembly(without 

Bearings) 

Net to net. 

23 Tyres (1 Set= 3 Nos.) Net to net. 


25 Output Shaft Assembly Net to net. 

26 Carburator Assembly Net to net. 


28 Clutch Assembly Complete Net to net. 

29 Driving Sprocket Net to net. 


31 Pinion Shaft Assembly Net to net. 


equivalent 

33 Bearing (SKF 6203.C3) or 

equivalent 


equivalent 

35 Needle Roller Bearing (KZK 

162212) or equivalent 

36 Needle Roller Bearing (KBK 

121516) or equivalent 

Net to net. 

Net to net. 

Net to net. 

Net to net. 

Net to net. 

37 Helical Gear Net to net. 


39 Central Bush- brake Drum Net to net. 


41 Front Hub Pin Net to net. 

42 Supressor Cap Net to net. 


44 High Tension Coil Net to net. 

45 Control Cable Set (1 Set = 4 

Nos.) 

46 Rear View Mirror Set(1 Set=2 

Nos.) 

Net to net. 

Net to net. 

47 Wiring Harness Net to net.




51 Rear Shock Absorber Net to net. 

52 Antidive Link Complete Net to net. 


Set = 7 Nos.) 

C182 

Net to net. 

54 Decal (1 Set = 2 Nos.) Net to net. 

55 Blinker Set (1 Set = 4 Nos.) 

(without bulbs) 

56 Auto Switch Assembly (1 Set = 2 

Nos.) 

Net to net. 

Net to net. 

57 Throttle Pipe Net to net. 

58 Tail Lamp Assembly (without 

bulbs) 

Net to net. 



61 Brake Liner Net to net. 

62 Wiring Harness for Stator Net to net. 

63 Front Link Net to net. 


65 Steering and Seat Lock & Key Net to net. 

66 E.I.S Assembly (without SCR 

and Diode) 


Components 

Net to net. 

Net to net. 


69 Reflector Net to net. 

70 Head Lamp Assembly (without 

bulbs) 

Net to net. 

71 Bobbin Charging Coil Net to net. 

72 Duct Net to net. 



75 Inserts 





Note 1. The item of import and its specification should conform/match with the export product. 

2. Import items mentioned at Sl. No. 73 to 79 are allowed Upto 5% of FOB value of export. 

C967 45 CC to 75 CC 1 No 1 Metels 

Motorcycles in CBU/ 

SKD/ CKD condition 

a) 

b) 

Alloys Steel Sheet/Strips/Bars 

CRCA Sheet/Coil/Strips 

14.520 kgs 

30.710 kgs 

c) H.R.Coil/Strips 6.150 kgs 

d) Aluminium Alloy Ingots 24.165 kgs

e) M S Rods/ Bars 1.4777 kgs 

2 Chemicals 

a) Synthetic Rubber (SBR/PBR) 6.570 kgs 

b) Paints 1.0 kgs 

c) P U Foam 0.575 kgs 

d) PVC leather cloth 2.20 kgs 

e) Nylon Granules 1.10 kgs 

f) HDPE Granules 1.10 kgs 

g) PVC Resin (Paste Grade) 0.50 kgs 

h) P.P. Granules 2.50 kgs 

3 Components & Parts, Assemblies 

and Sub-Assemblies :- 

a) Bearings (C/SBRG-17) 2 Nos 

b) Bearings (Clutch BRG-5184728) 1 Nos 

c) Bearings (Needle BRG. BIG) 1 Nos 

d) CDI Unit 1 Nos 

e) Generator Assembly 1 Nos 

f) Spark Plug 1 Nos 

g) High Tensile/Nut/Bolts 

Screw/Rivets. 

h) Piston,Piston Ring and Pin 1 set 

C183 

0.0792 kg 

i) Gear Box 1 Nos. 

j) Flasher 1 Nos. 

k) Tail Light 1 Nos. 

l) Head Light 1 Nos. 

m) Speedometer 1 Nos. 

n) H.T. Coil 1 Nos. 

o) Brake Shoe 4 Nos. 

p) Cable 11 mtrs 

q) Reflector 2 Nos 

r) Indicator 2 Nos 

s) Filter 1 Nos 

t) Lock 3 Nos 

u) Automobile Bulb 7 Nos 

(1) The items of import and its specifications should conform with the export product 


100 CC Motorcycle in 

CKD/SKD/CBU 

Condition 



2 Coated Prime Steel 




35.34 kgs 

1.243 kgs 

3.047 kgs 

4 Seamless Alloy Steel Tubes 0.082 Mtr. 



10.44 kgs 

6 Silicon 1.428 kg

7 Copper Cathode/Wire Bar/Rod 0.251 kg 


Copper Wire 

C184 

0.214 kg 

9 Natural Rubber 3.108 kgs 



12 Synthetic Rubber (NBR 

/SBR/PBR) 

0.567 kg 



Granules 

358.733 gms 

15 Polypropylene Granules 1663.767 gms 

16 PVC/Artificial 0.500 Sq.Mtr. 


18 Nylon Granules 0.556 kg 

19 Main Shaft Assembly Net to net. 

20 Crank Shaft Assembly Net to net. 

21 Multiple Gear Assembly Net to net. 

22 Front Shock Absorber Net to net. 

23 Rear Shock Absorber (1 Set = 2 

Nos.) 

Net to net. 





equivalent 


equivalent 


equivalent 


equivalent 

31 Bearing (SKF 6301ZR.C3) or 

equivalent 

32 Bearing (SKF 6004.C3) or 

equivalent 

Net to net. 

Net to net. 

Net to net. 

Net to net. 

Net to net. 

Net to net. 

33 Speedometer Complete Net to net. 

34 Auto Cable Set (1 Set = 6 Nos.) Net to net. 

35 Rear View Mirror Set (1 Set=2 

Nos.) 

Net to net. 




39 Auto Switches Set (1 Set = 4 

Nos.) 

Net to net. 


41 Assembly Lamp Indicator Rear 

(1 Set = 2 Nos.) 

Net to net. 

42 Decal (1 Set = 2 Nos.) Net to net.


Set = 8 Nos.) 

C185 

Net to net. 

44 Clutch Bush Assembly Net to net. 

45 Front Side Indication Lamp 

Assembly (1 Set = 2 Nos.) 

Net to net. 

46 Front Link Assembly Net to net. 


48 Steering Lock Barrel/Key Net to net. 

49 Tail Lamp Assembly Net to net. 


51 Stator Harness Net to net. 



54 Tool Kit Complete Net to net. 

55 Needle Roller Bearing Net to net. 

56 Hub Pin Set (1 Set = 2 Nos.) Net to net. 

57 Elctronic Ignition Unit Assembly 

(without SCR & Diode) 

Net to net. 


59 Outlet Tube Assembly Assembly Net to net. 

60 Sector Gear Assembly Net to net. 

61 Reinforcement Assembly Net to net. 

62 Carrier Assembly Net to net. 


64 Oil Seal (1 Set = 2 Nos.) Net to net. 

65 Nipple Spoke (1 Set = 72 Nos.) Net to net. 

66 Sprocket Wheel (1 Set = 2 Nos.) Net to net. 

67 Manifold Net to net. 


69 Inner Cage Net to net. 

70 Bearing Carrier Net to net. 

71 Spoke (1 Set =36 Nos.) Net to net. 

72 Engine Gear Net to net. 

73 Pillion Holder Net to net. 


Components 

Net to net. 




78 Inserts 




82 Steel Shots

Note. 1 The item of import and its specification should conform/match with the export product. 

2. Import items mentioned at Sl. No. 76 to 82 are allowed Upto 5% of FOB value of export. 

C969 Agricultural Tractor in 

CKD/ SKD/ CBU/ SKID 

condition thereof 

1 No. 1 Air Filter 1 No. 

2 Automotive Battery 1 No. 

3 Bearing (All types other than 

Engine Bearing) such as Ball 

Bearing/ Taper/ Cylindrical/ 

Needle Roller Bearings 

Net to net. 

4 Brake Assembly (Prime and/ or 

Secondary) 

1 No. 

5 Clutch Assembly (Including 

Split/ Torque Type) 

1 No. 

6 Internal Combustion Engine 

Complete 

OR 

1 No. 

6 a) Piston Rings Net to net. 

b) Gaskets 1 No. 

c) Oil Seal for Engine (Front and/or 2 Nos. 

Rear) 

d) Pistons 4 Nos. 

e) Injectors 4 Nos. 

7 Fuel Injection Pump 1 No. 

8 Front Axle (2 Wheel Drive 

and/or 4 Wheel Drive) complete 

and/or Parts/ Accessories 

1 No. 

9 Fuel Filter 1 No. 

10 Hydraulic Pump (Including 

Auxiliary hydraulic Pump) 

1 No. 

11 Hydraulic Cylinder 1 No. 

12 Hydraulic Valves 1 No. 

13 Oil Seals (other than Engine) Net to net. 

14 Oil Pump 1 No. 

15 Hydrostatic Unit/ Valves for 

Hydraulic Transmission 

1 No. 

16 Radiator 1 No. 

17 Seat Assembly 1 No. 

18 Synchropacks and/or 

Synchroniser 

1 No. 

19 Silencer 1 No. 

20 Frontwheel Tyre 1 Set 

21 Rearwheel Tyre 1 Set 

22 Frontwheel Tyretube 1 Set 

23 Rearwheel Tyretube 1 Set 

24 Front Wheelrim 1 Set 

25 Rear Wheelrim 1 Set 

26 Water Pump Seal 1 No. 

27 Water Pump 1 No. 

28 'O' Ring Net to net. 

29 Transmission complete or 1 No. 

C186

C970 Alternator Assembly 

C971 Aluminium Pistons, 

exported in fully 

machined condition 

C187 


30 Alternator 1 No. 

31 Starter Motor 1 No. 

32 Turbo Charger 1 No. 

33 Safety Neutral Switch 1 No. 

34 Rops (Safety Equipment) Roll 

Over Protection Frame 

1 Set 

35 Wiring Hanrness 1 Set 

36 Oil Seperator 1 Set 

37 Auxiliary Valves 1 No. 

38 Relevant Alloy Steel Rods/ 

Rounds/ Billets 

39 Relevant Hot Rolled/ Cold 

Rolled Steel (Sheets/ Wide Coils) 

1 No 1 Copper electrolytic grade 

standard wire/ bar/ rod 

0.7 Kg 

2 CR Steel Sheet extra deep 

drawing 0.8 to 1 mm thick 

4.2 Kg 

3 Steel rod free cutting ENIA/SAE- 5.3 Kg 

8620 or eqv. 5-36 mm dia 

4 Solder - Tin - 80% Lead - 20 % 0.01 Kg 

1 M.T. of 

piston 

5 Polyester sheet/strip/film 25 to 

200 Micron thick 

0.04 Kg 

6 Ball Bearings 2 Nos 





7 Power (Rectifier) Diodes Net to Net 

8 Regulator Net to Net 

9 Rectifier 3A 200 V PIV Net to Net 

1 Aluminium/ Aluminium Scrap 1279 kg 

2 Copper 12 kg 

3 Nickel 12 kg 

4 Magnesium 18 kg 

5 Silicon 162 kg 

C972 Steel Anchor Pin 1.0 kg 1 Non-Alloy Steel Round/ Billets 1.100 kg/Kg Content 


C973 Armature for Delcoremy 

type motor 

C974 Armature for Dynamo 



2 Kg 



6 Kg 

3 Steel rod free cutting FNIA/SAE- 2.3 Kg 


4 Solder Tin - 80% Lead - 20 % 0.05 Kg 



0.6 Kg 



1.6 Kg 




5 Polyester sheet/strip/film 25 to 0.02 Kg

C975 Asbestos brakelinings 

with Brass chips 

C976 Asbestos brakelinings 

without Brass chips 

C977 Asbestos Clutch Facings 

C978 Asbestos Disc Brake Pads 

C979 Asbestos Free 

brakelinings with Brass 

chips 

C980 Asbestos Free 

brakelinings with Nitrile 

Rubber 

C981 Asbestos Moulded Non- 

Metallic Brake Lining 

C188 


1 Kg 1 Phenol Formaldehyde Resin 0.223 Kg 

2 Brass Chips 0.028 Kg 

3 Asbestos raw 7015 grade 0.375 Kg 

4 Asbestos Raw - 5221 grade 0.100 Kg 


2 Asbestos Raw 7015 grade 0.456 Kg 


1 Kg 1 Phenol formaldehyde Resin 0.159 Kg 



4 Asbestos Raw - 5221 grade 0.149 Kg 

1 kg 1 Phenol Formaldehyde Resin 0.18 kg 

2 Asbestos Raw in different grades 0.65 kg 

3 Other items namely Aluminium 

Powder, Brass Chips, Brass 

Powder, Acrylonitrile Butadiene 

Rubber/ Nitrile Butile Rubber, 

Copper Powder, Bonding 

Adhesive 

4 Misc. items: Grinding Wheels 

(Diamond/Abrasive), 

Electrometallic Slitting Saws, 

Carbide Tips, Mould Releasing 

Solution, Endless Emery Belts 


2 Fibre Class Chopped Strands 0.095 Kg 



Diamond/Abrasive 

Electrometallic Slitting Saw 

Carbide Tips, Mould Release 

Solution and Endless Emery Belt 

Not exceeding 4% of 

the FOB value of 

export 






2 Fibre Glass Chopped Strands 0.095 Kg 



Powder, Acrylonitrile Butadiene 

Rubber/ Nitrile Butile Rubber, 


Adhesive 

0.012 kg 

4 Misc. items: Grinding Wheel, Upto 3% of FOB 

Diamond/Abrassive 

Electrometallic Slitting Saw 

Carbide Tips, Mould Release 

Solution and Endless Emery Belt. 


5 Iron Powder. 0.135Kg. 


2 Asbestos raw in different grades/ 

Asbestos Yarn 

0.70 kg 



Powder, Nitrile Butile Rubber/ 



export

C982 Asbestos Moulded Clutch 

Facings 

C983 Automobile Tyre-Tube 

Valves 

C984 Automotive Radiator 

Core (Copper and Brass 

Construction) 

C985 Automotive Radiators 

made of Copper and 

Brass 


Adhesive 


(Diamond/ Abrasive), 





2 Asbestos raw in different grades/ 

Asbestos Yarn 

0.70 kg 



Powder, Nitrile Butile Rubber/ 


Adhesive 






1 kg 1 Brass Scrap/Brass Rods 

OR 

C189 









1 a) Copper Scrap 1.10 kg/kg content in 


b) Zinc Ingot 1.10 kg/kg content in 


2 Nitrile/Silicon Rubber/Teflon 

Tubing/Butyl Rubber 



3 Rubber Chemicals 8% of weight of 

Rubber content in 

export 

4 Lead Refined 1.05 kg/kg content in 

export 

1 kg 1 Copper 

Foils/Sheet/Strips/Plate/Ingot/Cat 

hodes 

0.26 kg 

2 Brass Foils/Tubes 0.26 Kg 

3 Brass Sheet 0.32 Kg 

4 a) Tin Ingot 0.075 kg 

b) Lead Ingot 0.075 Kg 

1 kg 1 Copper 

Foils/Sheet/Strips/Plate/Ingot/Cat 

hodes 

2 Brass Foils/Tubes 

OR 

(a) Copper Cathode/ Wire Bar/ 

Ingot/ Rod 

(b) Zinc Ingot 

3 Brass Sheet 

OR 

(a) Copper Cathode/ Wire bar/ 

Rod 

(b) Zinc Ingot 

4 (a) Tin Ingot 

(b) Lead Ingot 

5 Terene Sheet or CRCA 

Sheet/Coil/Strips 

0.22 kg 

0.22 kg 

0.162 kg 

0.07 kg 

0.31 kg 

0.228 kg 

0.098 kg 

0.070 kg. 

0.074 kg 

0.22 kg 

6 Flux 1% of the FOB value

C986 Automotive timing chain 1.0 kg 

Content of 

Import Item 

C987 Automotive Timing 

Chains for four wheeler 

application 

C988 Automotive Water Pump 

C989 Axle Shaft 


1 kg 1 Cold Rolled Alloy Steel Strip 0.350 kg 

2 Cold Rolled Medium Carbon 

Steel Strip 

0.700 kg 

3 Alloy Steel Wire Rod 0.204 kg 

1 No. 1 Integral shaft water pump bearing Net to Net 

OR 

Ball Bearings (SKF No. to be 

specified) 

Net to Net 

2 Seal Assembly 1 No. 

3 Aluminium Alloy 1.10 Kg. per Kg. of 

aluminium alloy 


product 

1 MT. 1 Carbon/Alloy Steel Bars of 

relevant Grade 

C190 



2 Unwrought Zinc 4% of the weight of 

Steel in export 

product. 

C990 BB Axle 1.0 kg 1 Non-Alloy Steel Round 1.150 kg/Kg Content 


C991 Brake shoe plate 1 kg 1 HR Steel sheet/ strips/ coils 1.10 kg 

C992 Bronze/ Gun Metal 

Impellers for pumps, all 

types 

1 Kg 1 Brass Scrap 1.075 Kg/Kg of Brass 


C993 Cam 1 kg 1 Steel of quality EN 39A 1.39 kg 

C994 Cam Shaft 1 kg 1 Non-Alloy Steel Rounds 1.47 kg/Kg content in 


C995 CBH Flate for starter 

motor 

1 No 1 C R Steel sheet extra deep 


0.4 Kg 

2 Carbon brush 2 Nos 

C996 Chain Cover Hinges 

Shakle Plates made of 

CRCA Sheet 

C997 Cluch Cover Assembly 

C998 Clutch Plate/Disc 

Assembly/Driven Plate 

1 kg 1 Mild steel CRCA Sheets/ 


secondary 

1 kg. 1 CRCA Sheet/ Coils (EDD 

Quality) 

2 High Carbon/Medium Carbon 

Steel Strips 

1.05 kg/Kg Content 






3 Spring Steel Wire 1.10 kg/kg content in 


1 kg 1 CRCA Sheet/Coil 1.8 kg/kg content in 


2 High Carbon/Medium Carbon 

Steel Strips 



3 Alloy Steel Bars 1.8 kg/kg content in 


4 Spring Steel Wire 1.10 kg/kg content in 


5 Friction Facing (To be allowed 

only when, the export product 

supplied with friction facing) 

2 Nos./Assembly 

C999 Commutator 1 No 1 Copper electrolytic grade wire/ 0.5 Kg

C1000 Cone Sleeve/Axle Stud 

sleeve 

C191 

standard grade bar/ rod 

1.0 kg. 1 Seamless Steel Tubes 1.200 kg/Kg content 


C1001 Connecting Rod Forging 1 No. 1 Forging quality Alloy Steel in 

Bars/ Billets 

0.00625 MT 

C1002 Connecting Rods 1.0 kg 1 Non-Alloy Steel rounds 1.47 kg/Kg content in 


C1003 Cooling Fins 1 MT 1 CRCA Steel Coils/Sheets 1.05 MT 

C1004 Cotter pin (Split Unsplit ) 

made of non-alloy steel. 

C1005 Cotter Pin(Split /Unsplit ) 

made of Alloy Steel 

1Kg. 1 Non-Alloy Steel Round/Bar 1.10 kg 

1 kg 1 Alloy Steel Rounds/ Bar 1.10 kg 

C1006 Crank for chain wheel 1.0 kg 1 Non-Alloy Steel Round 1.470 kg/Kg content 


C1007 Crank Shaft (for four 

wheelers) 

C1008 Crank Shaft (for two 

wheelers) 

1.0 kg 1 Non-Alloy/ Alloy Steel rods 1.60 kg/Kg content in 


1.0 kg 1 Non-Alloy Steel rounds 1.47 kg/Kg content in 


C1009 Crank-shaft Forgings/ 1 KG 1 Forging quality alloy steel 1.400 kg 

connecting rod forgings 2 Forging quality carbon steel 1.700 kg 

C1010 Cylinder block for two 

wheelers 

C1011 Cylinder Head Gasket 

C1012 Deep Well Hand pump 

complete without 

connecting Rods with/ 

without spares & Tools 

C1013 Deepwell hand pump 

with connecting rods. 

1 kg 1 Aluminium/Aluminium Alloy 1.2 kgs 

1 No. 1 Copper Wire Bar 1.05 kg/kg content in 


1 No.(Net 

weight of 

pump 

minimum 70 

Kg) 

1 No (net wt 

of pump 

2 Asbestos Jointing Sheet 1.25 kg/kg content in 


3 Tool Steel Upto 1% of FOB 

Value of export. 

1 M.S.Sheet/ Plate/ Angle/ Rounds/ 61.6 Kgs 

Bar 

2 CRCA sheet 2 mm 1.85 Kgs 

3 Gun Metal Scrap 2.37 Kgs 

4 Pig Iron 7.99 Kgs 

5 Brass 0.61 Kg 

6 Nitrile 0.095 Kg 

7 Stainless Steel/Special Sheet 

Rounds 

1.10 Kgs 

8 Zinc 3.0 Kgs 

9 Ball Bearings 2 Nos. 

10 Fasteners 0.72 Kg 

11 Roller Chain 0.43 Kg 

12 Misc. items: Welding electrodes, 

Electroplating salts, Cutting & 

other Tools measuring 

instruments 

1 M.S. Sheet/ Plate/ Angle/ Round/ 

Bar 

CIF value limited to 


90 kg

C1014 Delivery valve of Fuel 

Injection Equipment 

minimum 

96.37 kg 

2 CRCA Sheet 2 mm 1.85 kg 

3 Gun Metal Scrap 2.37 kg 


5 Brass 0.61 kg 

6 Nitrile Rubber 0.095kg 

7 Stainless Steel/ Special Steel 

Rounds 

1.10 kg 

8 Zinc 3.0 kg 

9 Ball Bearings 2 Nos 

10 Fasteners 0.72 kgs 

11 Roller Chain 0.431 kg 

12 Misc. items: Welding Electrodes, 3% of FOB 

Electroplating salts, cuttings and 

other tools measuring 

instruments 

1 kg 1 Alloy Steel Bars/Coils Type 18 

CR N 18/SAE 3415/16 mm MM 

CR 5/Equivalent 

1.10 Kg 

2 Alloy Steel Bars/Coils Type SAE 2.93 Kg 

52100/Equivalent 


a)Grinding Wheel (with or 

without Framework) 

b)CBN/ Diamond Honing Stick 

Blank/ Support Stones/ 

Deburring Tools 

c)Carbide Cutter 

d)Plain Grinding Wheels/ CBN 

Wheels 



C1015 Diesel Engine Parts (not 1 kg 1 Mild Steel 1.10 kg 

elsewhere specified) 2 Relevant Nylon (6/66) 1.05 kg/kg content in 

export 

C1016 Diesel Engine Parts (not 1 kg 1 Pig Iron 1.10 kg 

elsewhere specified) 2 Relevant Nylon (6/66) 1.05 kg/kg content in 

export 

C1017 Draw bars 1.0 kg 1 Non-Alloy Steel Round/ Billets 1.5 kg/Kg content in 


C1018 Drive assembly for 

starter motor 

1 No 1 Steel rod free cutting ENIA/SAE- 3 Kg 


C1019 Drum Brake Assembly 1 kg 1 HR Sheets/Coils 1.47 kg. 

(Aggregate/SKD/CKD/KI 

TS) 

2 Alloy/Non Alloy Steel 

Bars/Billets/Rounds 

0.21 kg. 

3 Castings (Unmachined) 

OR 

0.18 kg. 

3 Pig Iron 0.25 kg. 

4 Fasteners Like 

Nuts/Bolts/Springs/Shoe Set/Pins 

etc. 

C192 



5 Friction Material Upto 12% of FOB 

Value of exports.

C1020 Electric Starter 

C1021 End-Cap Assembly 

C1022 Engine Patti PGT ZP 

C1023 EPDM Rubber Bonded 

Bi-components 

C1024 EPDM Rubber Bonded 

Door Beading 

6 Bonding Adhesive Upto 8% of FOB 


7 Misc. items: Assembly Fluid, 

Grease, Cutting Tools Like 

Drills/Taps/Reamers 

1 No. 1 Magnet 2 Nos. 

2 Commutator 1 No. 

3 Carbon Brush 2 Nos. 

4 Ball Bearing 1 No. 

5 Moulding Powder (Specific Item 

to be specified both in 

application and licence) 





C193 



1 kg/kg content in 

export item. 

0.9 Kg 

0.02 Kg 



1 kg. 1 CRCA Sheet/ Coils 1.59 kg 

2 Zinc 0.0083 kg 



0.423 kg 


3 EPDM Synthetic Rubber 0.35 kg 



0.007 kg 



0.282 kg 


3 EPDM Synthetic Rubber 0.248 kg 



C1025 Fan Blade 1 kg 1 MS CRCA sheet/ strips/ coils 



C1026 Field Coil for Starter 

Motor 

C1027 Flex Plate Assembly 

C1028 Flurocarbon Rubber 

(Viton) Oil Seals 

0.007 kg 

1.05 kg 


standard wire/bar/rod 

0.85 Kg 

2 Solder Tin - 80 Lead - 20% 0.03 Kg 

1 Kg. 1 Non-Alloy Steel Rounds and/or 1.32 Kg/Kg content 

billets and/or Rolled Sections viz. in the export product. 

Plate/Flat/Bar/Rod 

2 Non-Alloy Steel Prime and/or 

defective and/or second and/or 

Pickled Sheets and/or coils 

and/or strips 



3 Misc. items: Hobs, Carbide Tools upto 3% of FOB 

value 

1 kg 1 Raw material: 

a) MS CRCA Sheet/Strips/Coils 

including Seconds/Defectives but 

excluding Coated. 



b) Polyacrylic Rubber Compound 1.33 Kg/kg content in 


2 Composition of the Compound

C194 

per Kg. : 

a) Flurocarbon Rubber 0.68 Kg 

b) Carbon Black 0.13 Kg 

c) Misc. Chemicals and Rubber 

Chemicals: Zinc Oxide, Stearic 

Acid, Antioxidants, Accelerator, 

Plasticizer, Process Aids, 

Sulphur, Bonding Agent and 

Processing Oil 

Note : 1. Rubber Chemicals should not exceed 0.02 kg of total chemicals. 

C1029 Flywheel Starter Ring 

Gear 

C1030 Forged Crankshaft Fully 

machined (Made of 

Alloy/Non-Alloy Steel) 

C1031 Front Axle Beam-Fully 

Machined 

1 kg content 

of Import 

Item 

1 No. with 

specified 

weight 

1 Non-Alloy Steel Round and/or 

Billets and/or Rolled Sections 

viz. Plate/Flat/Strip/Bar/Rod 

0.07 Kg 

1.32 kg 

2 Misc. items: HOS/Graphite Tools Upto 3% of FOB 


1 Alloy/Non-Alloy Steel 

bars/Rods/Billets/Blooms/Ingots 

(only relevant steel required is to 

be allowed i.e. against Alloy 

Steel product, Alloy Steel and 

against Non-Alloy Steel product, 

only Non-Alloy Steel isto be 

allowed 

2 Misc. items: Rectangular Die 

Steel Blocks and Die Steel 

Rounds, Consumables including 

consumable tools 



4 % of FOB Value. 

3 Furnace Oil 0.5 KL/MT of export 

1 MT 1 Forging Quality Non-Alloy Steel 

in Blooms/Billets/Bars 

1.80 MT 

2 Rectangular Die Steel Blocks & 

Die Steel Rounds 

0.025 MT 

3 Furnace Oil 0.5 KL 

C1032 Front Axle beam/I-Beam 1.0 kg 1 Non-Alloy Steel Round/ Billets 1.3 kg/Kg content in 


C1033 Three Wheeler Drive 

Away Chassis/ Freight 

Carrier Powered by 

Petrol engine of 125 CC 

to 300 CC in CBU/ 

SKD/CKD Condition 

1 No. 1 Cold Rolled (Prime) Steel 


2 Coated (Prime) Steel 


3 Hot Rolled (Prime) Steel 








4 Alloy Steel Wire 1.07 kg/kg content in 


5 Aluminium Alloy Ingots 1.04 kg/kg content in 


6 Seamless Steel Tubes 1.02 kg/kg content in 


7 Super Enamelled/ Enamelled 

Copper Wire 



8 Natural Rubber 1.05 kg/kg content in 


9 PVC/Artificial Leather Cloth 1.05 Sq.mtr/Sq.mtr 


product 

10 Polyol 1.05 kg/kg content in 

the export product

11 Isocyanate 1.05 kg/kg content in 


12 Butyl Rubber 1.05 kg/kg content in 



(NBR/ SBR/ PBR) 



Granules 

C195 







17 Paints 1% of the FOB value 

18 Nylon Granules 1.05 kg/kg content in 


19 Main Shaft Assembly Net to net 

20 Crank Shaft Assembly Net to net. 

21 Relevant set of gears-1 set each Net to net. 





26 Bearing (FAG 98305.C3) or 

Equivalent 

Net to net. 


Equivalent 

Net to net. 

28 Bearing (SKF6301) or 

Equivalent 

Net to net. 


Equivalent 

Net to net. 

30 Bearing (FAG 98205) or 

Equivalent 

Net to net. 


Equivalent 

Net to net. 

32 Bearing(SKF 1838002) or 

Equivalent Needle bush 

Net to net. 

33 Speedometer Complete Net to net. 


35 Rear View Mirror Set Net to net. 

36 Wiring Harness set Net to net. 



39 Auto Switches Set Net to net. 

40 Rotor Net to net. 

41 Automotive lights with bulbs Net to net. 

42 Magnet container assembly/ rotor Net to net. 

43 Lock assembly Net to net. 



46 Tool Kit Set Net to net.

47 Needle Bush Net to net. 

48 Hub Pin Set (1 Set =2 Nos.) Net to net. 



Components 

C196 

Net to net. 



53 Splined Shaft Net to net. 

54 Hand Brake Drive Complete Net to net. 

55 Chain Adjuster/ Tensioner Net to net. 

56 Terminal Board Net to net. 

57 Ring Nut-Right Net to net. 

58 Lamination Pack Coil Net to net. 

59 Idler Net to net. 

60 Set of Sprocket Net to net. 

61 Complete Clutch Cover shaft Net to net. 

62 Bush with Teeth Net to net. 

63 Trunion Net to net. 

64 Set of Bearing Races Net to net. 

65 Cam Net to net. 

66 Engine Gear Net to net. 

67 Reverse Control Gear Net to net. 

68 Idler Gear Assembly Net to net. 

69 Condenser Net to net. 

70 Wheel Axle Assembly Net to net. 

71 Differential Assembly Net to net. 

72 Brake Lever Assembly Net to net. 

73 Brake System and parts thereof Net to net. 

74 Wiper Motor Net to net. 

75 Upper Attachment Net to net. 

76 Wiper Blade Assembly Net to net. 

77 Wind Shield Glass Net to net. 

78 Torsion Bar Net to net. 

79 Anti Vibration Mounts Net to net. 


81 Clutch Gears Cross Net to net. 

82 Clutch Assembly and Parts 

thereof 

Net to net. 

83 CNG Cylinder Net to net. 

84 CNG /LPG KIT (excluding 

Cylinder) 

Net to net. 

85 Cones Net to net. 

86 Crankcase Net to net. 

87 Crankcase Cover Net to net.

88 Cross Net to net. 

89 Cylinder Head Casting Net to net. 

90 Fan Cowl Net to net. 

91 Flexible Coupling/Flange Net to net. 

92 HUB (set of 2) Net to net. 

93 Isolator Vibration Net to net. 

94 Lever GR Stop Control Net to net. 

95 Lever Group for Max Controlling Net to net. 

96 Oil Plug Assembly Net to net. 

97 Regulating Lever Assembly Net to net. 

98 Reverse Motion Shaft Net to net. 

99 Rod Control lever Sub-Assly Net to net. 

100 Screw Net to net. 

101 Set of Rings Net to net. 

102 Set of Seals Net to net. 

103 Set of Spacers Net to net. 

104 Spark Advance Regulator Assly Net to net. 


106 Starting Ring Gear Net to net. 

107 Tappet Cup Net to net. 

108 Thrust Bearing Group Net to net. 

109 Tyre (set of 4 Nos) Net to net. 

110 Valve for Piston Cooling Net to net. 

111 Valve of set Net to net. 

112 Torsion Bar Bearing Assembly Net to net. 

113 Wheel Cylinder Net to net. 

114 Upper Pin Net to net. 

115 Lower Pin Net to net. 




119 Inserts 




Note: CIF value of item mentioned at Sl. No. 116 to 122 taken together is restricted to 5% of FOB value 

C1034 Front/rear axle shaft 1Kg. 1 Non-Alloy Steel Round/ Billets 1.300 kg 

C1035 Single Cylinder Fuel 

Injection Pumps for 

Diesel Engines 

1 No. A.Raw Materials: 

1 Alloy steel Bars/Coil to 

specification SAE 52100 or 

equivalent 

2 Alloy steel Bars/Coil to 

Specification SAE 3415 or 16 

Mn CrS5 or equivalent 

C197 


export. 


export.


export 

4 Free Cutting Leaded/Non Leaded 

Bars/Coils including 

Ultrasonically tested Steel or 

equivalent 

5 Steel to specification EN 8M or 

VS 13113 or equivalent 

C198 


export 


export 

6 Spring Steel 

B.Components: 


export 

7 Element Net to net. 

8 Delivery Valve Net to net. 

9 Protective Cap Compression Spring 

10 O Ring Net to Net 

11 Round Head Grooved Screw Net to Net 

12 Guide Plate Net to Net 

13 Protective Cap Net to Net 

14 Clamping Ring Net to Net 

15 Pin Net to Net 

16 Fillister Head Screw Net to Net 

17 Spring Seat Net to Net 

18 Guide Pin Net to Net 

19 Plug Net to Net 

20 Spring Ring Net to Net 

21 Filler Piece Net to Net 

22 Eccentric Bolt Net to net 

23 Gasket Net to Net 

24 Sleeve Net to Net 

25 Control Rod net to net 

26 Roller net to net 

27 Roller Tappet Body net to net 

28 Control Sleeve net to net 

29 Retaining Ring net to net 

30 Eccentric Pin net to net 

31 Screw Plug Net to net 

C.Miscellaneous Items: 

CNB/Diamond Honing Stick 

Blanks/Support Stone/Deburring 

Tools, Hone Holders, Plain 

grinding Wheels/ Disc Wheels 

for lap/ Match Grinding/ CNB 

Wheels, Carbide End Mills/ 

Tools, Gem Shaper, Diamond 

Dresser, DeepHole Drill, 

Reamers, Oil Stones, Broaches, 

Drill & Calibration Fluid/ Test 

Oil 

C1036 Fuel Tank Cap 1 kg 1 MS CRCA sheet/ strips/ coils 1.12 kg 

cif value limited to 


of export

C1037 Full Tension Sleeve made 

of Steel. 

1Kg. 1 



Non-Alloy Steel Round/ Billets 1.4 kg/Kg content in 


C1038 Gasket Composite Sheet- 1 MT 1 Electrolytic Tin Plate Waste 666 kgs. 

double Cemjo 2 Raw Asbestos Fibre: 

Grade 7M - 450 

246 kgs. 

Grade 6D - 550 

82 kgs. 

C1039 Gasket Composite Sheet- 1 MT 1 Electrolytic Tin Plate Waste 927 kgs. 

Double Steel Faced 

Cemjo 

2 Raw Asbestos Fibre: 


76 kgs. 


25 kgs. 

C1040 Gasket Composite 1 MT 1 Electrolytic Tin Plate Waste 743 kgs 

Sheets-Single Cemjo 2 Raw Asbestos Fibre: 


202 kgs. 


67 kgs. 

C1041 Gaskets 1 Meter 1 Grafoil Tape (Papyox Smooth 

Robbon) 

1.1 Mtr./Mtr. net 


product. 

C1042 Generator (Dynamo) 

Assembly 



1.6 Kg 



6.5 Kg 




C1043 Half Collets for engine 

valves 

C1044 Hand Primer for Fuel 

Feed Pumps of Diesel 

Vehicles 

C1045 Handpump with 

connecting /pump rods 

(Model Afridev) 



0.03 Kg 

6 Carbon brush 2 No 

7 Ball Bearings 2 No 

1 Kg 1 Cold Rolled (Profile) Non-Alloy 

Carbon Steel Strip 

C199 

1.715 Kg 

1000 Nos. 1 Free Cutting Leaded Steel Bars 416 kgs. 

1 No (Net wt 

of Pump 

minimum 

78.6 kg) 


Bar 

55 kg 

2 CRCA Sheet 2 mm 4.75 kg 

3 Brass 2.2 kg 

4 Nitrile Rubber 0.66 kg 


Rounds 

13.34kg 

6 Zinc 3.5 kg 

7 Welding Electrodes Upto 2% of FOB 


8 PVC Resin 2.8 kg 

9 Nylon 6/66 Granules (moulding 

grade) (Only relevant item 

required/used is to be allowed) 

1.8 kg 

Note : 1. The quantity of import item 5 will increase with increase in the number of Connecting/Pump

Rods on pro-rata basis. 

C1046 Helical Coil Spring 1 kg 1 Spring Steel Wire rod 

OR 

1.10 kg 

Spring Steel wire 

1.01 kg 

C1047 Steel Hub Bolts 1Kg. 1 MS/Alloy/Non-Alloy Steel 

Rounds 

1.300 kg 

C1048 Steel Hub cone 1Kg 1 Non-Alloy Steel Round 1.150 kg 

C1049 Ignition Coil oil filled 1 No 1 Copper Wire enamelled 22 to 46 

SWG 

0.13 Kg 

2 Insulating Kraft paper electrical 

grade 

0.02 Kg 

3 Silicon steel sheet 0.5 to 1 mm 

thick 

0.3 Kg 

C1050 Ignition Coil Resin Cost 1 No. 1 Copper electrolytic grade 

standard wire/ rod/ ingots 

0.14 Kg 

2 Insulating Kraft paper electrical 

grade 

0.15 Kg 

3 Silicon steel sheet 0.5 to 1 mm 

thick 

0.80 Kg 

4 Epoxide resin 0.075 Kg 

C1051 Incandascent Automobile 

Bulbs upto 30 Volts 

C1052 Inlet /Exhaust Valves 

C1053 Deleted 

C1054 Integral Shaft Water 

Pump bearing for 

automotive applications 

5 Hardner 0.075 Kg 

100 Nos. 1 Soda Glass Tubing 1.15 kg/kg content in 

exports. 

2 Tungston Filament 115 Nos./100 Nos. of 

relevant Tungston 

Filament in exports. 

3 Glass Shell 125 Nos./100 Nos. of 

Glass Shell in 

exports. 

4 Lamp Caps 115 Nos./100 Nos. of 

Lamp Caps in 

exports. 

1Kg. 1 Valve steel (Alloy Steel/ Non- 

Alloy Steel) Bars 

OR 

Inconel Alloy 751 Bars 

2 Hard Facing Metal Alloy Powder 

of Grade Ni60, Stellite 1, 6 and 

12 

C200 





10 gms/Valve 

1 Kg 1 SAE 52100 Ball Bearing Steel 

and/or Alloy Steel; Hot Rolled 

and/or Cold Reduced/Cold 

oilgared and/or Spherodised 

Annealed and/or phosphate 

Coated; Seamless Tubes and/or 

Pipes in Random Lengths 

(ExcludingStainless Steel) 

0.774 Kg 

2 Nickel Chromium and 

Molybdenum Base Steel and/or 

Alloy Steel; Hot Rolled and/or 

Cold Drawn and/or Spherodised 

Annealed and/or Phosphate 

Coated; Wire Rods and/or Bars; 

in Random 

Lengths(Excludingstainless steel) 

1.270 Kgs 

3 SAE 52100 Ball Bearing Steel 

and/or Alloy Steel; Hot Rolled 

0.060 Kg

C1055 King Pin made out of 

Steel. 

C1056 Laminated Leaf Springs 

of steel. 

4 

and/or Cold Drawn and/or 

Spherodised Annealed and/or 

Phosphate Coated wire and/or 

Wire Rods and/or Bars; In 

Random Lengths (Excluding 

Stainless Steel) 

Cold Rolled Spring Steel Sheets 

and/or Strips and/or Coils 

0.027 Kg 

5 Misc. Items: Honing Sticks and/ 

or Internal and/ or External Track 

and/ or Raceway Grinding 

Wheels 

2.5% of FOB value 

1 kg 1 Relevant Alloy Steel Rounds 1.10Kg 

1 kg. 1 Relevant Silico Mangenese Steel. 1.05 kg 

C1057 Laminated Springs 1 kg 1 Spring Flat Bar 1.05 kg 

C1058 Lead Acid Storge 

Batteries of all 

types/Battery Cells. 

1 No. 1 a) Pure Lead 1.02 kg/kg content in 


b) Antimony 1.02 kg/kg content in 


c) Lead Calcium Alloy containing 

Calcium between 0.035% to 

0.16% and Tin upto 1.7% 

OR 

C201 



1 a) Pure Lead 1.02 kg/kg content in 


b) Antimony Lead Alloy 1.02 kg/ kg content in 


2 Battery Separators 

OR 

Rolls of Battery Seperators 

OR 

2 a) Synthetic Pulp Porous Paper 

Sheet 

OR 

Net to net 

1.05 Sq.Mtr./Sq.Mtr 


product 



a) Polythelene Sheet 1.03 kg/kg content in 


b) Acid Resistant Glass 1.05 kg/kg content in 


c) Nitrile Rubber Based Glue 1.05 kg/kg content in 


3 Tubular Bags Net to net 

4 Relevant Battery Cell Container 

and and Lids/ Relevant Battery 

Container and Lids 

OR 

Polypropylene Granules 

Net to net 

5 Battery Vent plugs Net to net 

6 Polarity Indicator Rings Net to net 

7 Rubber Grommet Net to net 

8 Electrolytic Copper Net to net 



9 Pure Tin 1.02 Kg/Kg Content 

the export product

C1059 Commercial Vehicles of 

GVW upto 7.5 MT in 

CBU/SKD/CKD 

condition 

10 Lignin 1.02 kg/kg content in 


11 ABS Resin 1.035 kg/kg content 


12 Epoxy Resin 1.05 kg/kg content in 


13 Hardner 1.05 kg/kg content in 


14 Pigment Red/Black 1.05 kg/kg content in 


15 Ink for Silk Screen 1.01 kg/kg content in 


16 Additives 1.05 kg/kg content in 


17 Terminals Net to net 

18 Safety vent valves Net to net 

1 No. A. RAW MATERIAL 

1 Hot Rolled Steel Plates 143.66 KG 

2 Thermo-Plastic Tubing (Nylon) 21.10 KG. 

3 Terne Coated Steel Coils 13.20 KG. 

4 Cold Rolled Steel Sheets. 123.56 KG. 

C202 

B. COMPONENTS FOR: GEAR 

BOX 

5 Toothed Wheel (Gear) 8 NO. 

6 Shaft 4 NO. 

7 Shim 1 NO. 

8 Front Cover 1 NO. 

9 Adjustment Ring 1 NO. 

10 Sliding Sleeve 3 NO. 

11 Fixed Hub 3 NO. 

12 Ring Toothed Synchro Flange 6 NO. 

13 Flange 1 NO. 

14 Piston 12 NO. 

15 Spring 12 NO. 

16 Ext.Cross Control 1 NO. 

17 Cover 1 NO. 

18 Ring Lock 1 NO. 

19 Smooth Bush (8859255/282) 2 NO. 

20 Side Cover 1 NO. 

21 Selector Block Assy. 1 NO. 

22 Control int. Shaft 1 NO. 

23 Pin Sub-Assy 1 NO. 

24 Spring Lock Washer 1 NO. 

25 Bearing Sleeve (8861547) 1 NO. 

26 Shoulder Screw with Flange 40 NO. 

27 Threaded Plug 1 NO.

28 Magnetic Plut 1 NO. 

29 Synchro Ring 5 NO. 

30 Fork 3 NO. 

31 Taper Roller Bearing (8858471) 2 NO. 

32 Four conrct ball bearing 

(8859238) 

C203 

1 NO. 

33 Needle Roller Bearing (8859576) 1 NO. 

34 Roller Bearing (8861545) 1 NO. 



37 Four Contact Ball Bearing 

(8863183/99431568) 

1 NO. 


39 Seal for Rotary Shaft 2 NO. 

40 Aluminium front/ rear Gear Box 

Casing 

C. CHASSIS COMPONENTS 

2 NO. 

41 Telescopic Gearshift 1 NO. 

42 Wheel Bearing Inner Front Axle 

(25590/25520) 

43 Wheel Bearing Outer Rear Axle 

(3982/3920) 

44 Wheel Bearing Inner Rear Axle 

(F 02 460 10) 

2 NO. 

2 NO. 

2 NO. 

45 Insulator Rubber 2 NO. 

46 Mounting Frame Side Member 

Insulator 

2 NO. 

47 CAB Mounting Bush Rear 2 NO. 

48 CAB Mounting Bush Front 2 NO. 

49 Spherical Bearing 

Assembly(98470006) 

50 Centre Bearing - Propellor Shaft 

(F 74 390 00) 

1 NO. 

1 NO. 

51 Tank Radiator 1 NO. 

52 S A W Brake Components 1 SET 

53 Differential Bearings 

(44143/44348) 

54 Differential Bearing (HM- 

803110/803146) 

1 NO. 

1 NO. 

55 Differential Bearing (1228-C-55) 1 NO. 

56 Differential Bearing (JM- 

511910/3994) 

2 NO. 

57 Disc Wheel Compone 7 NO. 

58 Exhaust Brake 1 NO. 

D. ENGINE COMPONENTS 

59 Front Oil Seal 1 NO. 

60 Rear Oil Seal 1 NO. 

61 Pulley Bearing 1 NO.

62 Thrust Washer 4 NO. 

63 Circlip 8 NO. 

64 Timing Gear Cover 1 NO. 

65 Con-Rod Half Bearing 8 NO. 

66 Bush 4 NO. 

67 Damper Flywheel 1 NO. 

68 Fan Hub 1 NO. 

69 Oil Pump Complete 1 NO. 

70 Timing Gears : Inj. Pump 1 NO. 

71 Timing Gears : Power Steering 1 NO. 

72 Exh. Mamifold 1 NO. 

73 Sump (Oil Pan) (Heat Exch.) 1 NO. 

74 CS Bearing 10 Nos. 

75 Rocker Shaft 1 NO. 

76 Conrod 4 NO. 

77 Timing Gear Covers 1 NO. 

78 Piston assy (with Rings) 4 NO. 

79 Crankcase (with Liner & Brg. 

Caps) 

C204 

1 NO. 

80 Cylinder Head 1 NO. 

81 Water Pump 1 NO. 

82 Timing Gears : Idler 1 NO. 

83 Timing Gears : Cam 1 NO. 

84 Cyl. Head Cover 1 NO. 

85 Pipe Assembly 1 NO. 

86 Inter Bush 1 NO. 

87 Thermostat 1 NO. 

88 Injectors 4 NO. 

89 Injector Pipe Assy 4 NO. 

90 Bolt with Washer 2 NO. 

91 Exh. Manifold Bolt 2 NO. 

92 Crankshaft Complet 1 NO. 

93 Cyl. Head Gasket 1 NO. 

94 Valve Cone 16 NO. 

95 Valve Collar Upper 8 NO. 

96 Integral Shaft Bearing 1 NO. 

97 Tappet 8 NO. 

98 Inj Pump Drive Couping 1 NO. 

99 Pump Control Bush 1 NO. 

100 Rocker Lever 8 NO. 

101 Tappet Adj Screw 8 NO. 

102 Washer 4 NO. 

103 Cam Shaft 1 NO.

C1060 Lined Shoe Assembly for 

Automobiles 

C1061 Machined trailor 

ball/hitch pin/linkage pin 

C1062 Commercial Vehicles of 

GVW above 7.5 MT and 

upto 16.5 MT in 

CBU/CKD/SKD 

condition 

104 Rotary Fuel Pump Components 1 SET 

C205 

E. DAY CAB TRIM 

COMPONENTS : 

105 Fasteners - Cab Trim (49 Items) 1 SET 

106 Hook Assy Cab Lock 2 NO. 

107 Lock Assy Cab Safety 1 NO. 

108 Door Lock Set 1 NO. 

1 No. 1 Hot Rolled Steel Sheet Pickled 

and Oiled - 4 mm 

2 Hot Rolled Steel Plates Pickled 

& Oiled - 6.4 mm 





3 Relevant Lining Net to net. 

4 Shoe Dip 10 gms 

5 Bonding Ahesive 10 gms 

6 Trichloroethylene 100 gms 

1Kg. 1 Non-Alloy Steel Round/ Billets 1.750 kg 

1 No. RAW MATERIAL 

1 Hot Rolled Steel Plates 226.24 kgs 

2 Thermo-plastic Tubing (Nylon) 24.38 Meters 

3 Terne Coated Steel Coils 17.80 kgs 

4 Cold Rolled Steel Sheets 123.56 kgs 

COMPONENTS 

5 Toothed Wheel (Gear) 8 No. 

6 Shaft 4 No. 

7 Shim 1 No. 

8 Front Cover 1 No. 

9 Adjustment Ring 1 No. 

10 Sliding Sleeve 3 No. 

11 Fixed Hub 3 No. 

12 Ring Toothed Synchro Flange 6 No. 

13 Flange 1 No. 

14 Piston 12 No. 

15 Spring 12 No. 

16 Ext.Cross Control 1 No. 

17 Cover 1 No. 

18 Ring Lock 1 No. 

19 Side Cover 1 No. 

20 Pin Sub-Assy 1 No. 

21 Spring Lock Washer 1 No. 

22 Shoulder Screw with Flange 40 No. 

23 Threaded Plug 1 No. 

24 Magnetic Plug 1 No. 

25 Aluminium Front/Rear Gear Box 2 No.

C206 

Casing 

26 Selector Block Assy 1 No. 

27 Control Int.Shaft 1 No. 

28 Smooth Bush 4 No. 

29 Bearing Sleeve (8861547) 1 No. 

30 Synchro Ring 5 No. 

31 F O R K 3 No. 

32 Taper Roller Bearing (8858471) 2 No. 


(8859238) 

1 No. 

34 Needle Roller Bearing (8859576) 1 No. 

35 Roller Bearing (8861545) 1 No. 




(8863183/99431566) 

1 No. 


40 Seal for Rotary Shaft 3 No. 

41 Telescopic Gearshift 1 No. 

42 Exhaust Brake 1 No. 

43 Steering Column Bearing (SKL- 

F-93233.1) 

44 Clutch Release Bearing 

(K0201410) 

2 No. 

1 No. 

45 Housing PVC 1 No. 

46 Insulator Rubber 2 No. 

47 Mounting Frame Side Member 

Insulator 

48 Spherical Bearing Assembly 

(9847000 

2 No. 

1 No. 

49 Cargo - Badge 1 No. 

50 Nozzle Windscreen Washer 2 No. 

51 Tank Radiator 1 No. 


(39581/39520) 


(3585/3525) 

54 Wheel Bearing Inner Rear Axle 

(42687/42620) 

55 Centre Bearing - Propellor Shaft 

(F 7439000) 

2 No. 

2 No. 

2 No. 

1 No. 

56 S A W Brake Components 1 Set 

57 Differential 1 No. 


(34478/34306) 


(HM804810/846) 


(55437/55200C) 

1 No. 

1 No. 

1 No.

61 Differential Bearings (1228-H- 

580) 

C207 

1 No. 

62 Disc Wheel Components 7 No. 

63 Oil Pump Complete 1 No. 

64 Timing Gear Case 1 No. 

65 Inj Pump Drive Coupling 1 No. 

66 Pump Control Bush 1 No. 

67 Rocker Lever 8 No. 

68 Cam Shaft 1 No. 

69 Water Pump 1 No. 

70 Relief Valve 1 No. 

71 Tappet 8 No. 

72 Crankshaft 1 No. 

73 Piston Set 4 No. 

74 Exhaust Valve 4 No. 

75 PC Nozzle Assy 4 No. 

76 Fan with Bush 1 No. 

77 Exh.Manifold 1 No. 

78 Fan Hub 1 No. 

79 Intrcooler Comp. 1 No. 

80 Cartridge Filter 1 No. 

81 S U M P 1 No. 

82 Crkcse-Comp.Assy 1 No. 

83 Cyl.Head-Com.Asy 1 No. 

84 F I P 1 No. 

85 Connection Sleeve 1 No. 

86 Sleeve 1 No. 

87 Taper Plug 2 No. 

88 Plug 2 No. 

89 Valve Cone 16 No. 

90 RR Oil Seal 1 No. 

91 Circlip 1 No. 

92 Damper 1 No. 

93 Ex Manifold Bolt 12 No. 

94 Cyl.Hd Gskt [Thin] 1 No. 

95 Water Pump Seal 1 No. 

96 Filter Gasket 1 No. 

97 Valve Collr Upr 8 No. 

98 Front Oil Seal 1 No. 

99 Int Shaft Brg 1 No. 

100 Control Valve 1 No. 

101 Ring Split Circlip 1 No. 

102 `O' Ring Gasket 2 No.

103 Ring Alignment 1 No. 

104 Ring Power Steering 1 No. 

105 Hub for Control Joint 1 No. 

106 Line Pipe Socket 2 No. 

107 Flow Cntrl Vlve 1 No. 

108 Power Steering Pump 1 No. 

109 Fasteners - Cab Trim (49 items) 1 Set 

110 Hook Assy Cab Lock 2 No. 

111 Lock Assy Cab Safety 1 No. 

112 Door Lock Set 1 No. 

113 24 Starter Motor 1 No. 

114 CDS Steel Tubes for Injector 

Pipes 

C208 

3.2 Mtrs. 

115 Oil Pipe Support 1 No. 

116 Gasket 1 No. 

117 Grooved Stud 1 No. 

118 Pressure Piece 6 Nos. 

119 Element Cigar Lighter 1 No. 

120 Ring Cigar Lighter 1 No. 

121 Base Cigar Lighter 1 No. 

122 Ash Tray (F7872760) 1 No. 

123 Glove Box Lid 1 No. 

124 Handle Assist RH 1 No. 

125 Handle Assist LH 1 No. 

126 Lever with Bush & Support 1 No. 

127 Lead 17.105 kg. 

128 GM Separators 110 Nos. 

129 Antimony 0.231 kg. 

130 Polypropeiene 1.79 kg. 

131 Polymethyle Methacrylite 

Moulding Powder-Red 

132 Polymethyle Methacrylite 

Moulding Powder-Amber 

0.132 kg. 

0.0525 kg. 

133 Torsion Bar 1 No. 

134 Poppet 1 No. 

135 BallReturn Guide LH 2 Nos. 

136 Roller Bearings/Shaft 2 Nos. 

137 Thrust Washer 2 Nos. 

138 Seal Nut 3/8" 1 No. 

139 Seal Nut 5/8" 1 No. 

140 Slip Seal V/Hsg 1 No. 

141 Needle Roller 2 Nos. 

142 Needle Thrust Bearing 1 No. 

143 Seal Ring 2 Nos.

144 Seal Ring Valve 1 No. 

145 Seal Valve Hsg (Dirt Seal) 1 No. 

146 O Ring 2 Nos. 

147 O Ring Valve 2 Nos. 

148 O Ring V/Hsg Slipper Seal 1 No. 

149 O Ring R Piston 1 No. 

150 O Ring V/Hsg 1 No. 

151 Special Bolt 9/16" 6 Nos. 

152 Seal Ring S/Shaft 1 No. 

153 Seal Ring R/P 1 No. 

154 Seal Ring S/Shaft Hsg 1 No. 

155 Backup Washer 1 No. 

156 Gasket S/Cover 1 No. 

157 Retaining Ring (INT) 2 Nos. 

158 Trunion Seal 1 No. 

159 Seal S/Cover 1 No. 

160 Back Up Washer S/Shaft 1 No. 

161 Molecular Sleeve (Desiccant) 1.4 kg. 

162 Flexible Arm 1 No. 

163 Compressor Wheel MDC 1 No. 

164 Hollow screw 2 Nos. 

165 Gasket Ring 2 Nos. 

166 Socket Head Bolt 3 Nos. 

167 Segment TS 3 Nos. 

168 Boost Pressure Pipe 1 No. 

169 Control Valve 1 No. 

170 Heat Shield 1 No. 

171 Turbine Wheel Assy 1 No. 

172 Flinger Sleeve 1 No. 

173 Steel O Ring 1 No. 

174 Segment CS 3 Nos. 

175 Bolt Hex 6 Nos. 

176 Journal 2 Nos 

177 Snap Ring 4 Nos. 

178 Piston Ring 3 Nos. 

179 Thrust Ring 1 No. 

180 Thrust Plate 1 No. 

181 Oil Deflector 1 No. 

182 Plastic O Ring 1 No. 

183 Socket Head Bolt 4 Nos. 

184 Washer 4 Nos. 

185 Shaft Nut 1 No. 

C209

C1063 Nitrile Rubber Oil Seal 

186 Rubber Sleeves 1 No. 

187 Copper Was Mix 0.003 kg 

188 Styrene Butadiene Rubber 1502 0.23 kg 

189 Styrene Butadiene Rubber 1712 0.29 kg 

190 Tyre Cord Fabric 25/1680 2.52 kg 

191 Rubber Chemical 0.25 kg 

192 Polyvinyl Butyral Sheets 1.6512 Msqr. 

193 Green Float Glass 2.8198 Msqr. 





C210 



b) Nitrile Rubber compound 

(Composition of the Nitrile 

Rubber Compound per Kg. : 

1.10 Kg/kg content in 


a) Nitrile Rubber 0.47 Kg 

b) S.B.R. 0.05 Kg 

c) Carbon Black 0.40 Kg 

d) Misc. Chemicals and Rubber 





Processing Oil) 


C1064 Nozzle of Fuel Injection 

Equipment 

1 kg 1 Alloy Steel Bars/Coils Type 18 

CR N 18/SAE 3415/16 mm MM 

CR 5/ Equivalent 

2 Alloy Steel Bars/Coils Type AISI 

M2/Equivalent 

3 Misc. items: Gun Drill, Micro 

Drill, Spirol Drill, Grinding 

Wheel(with or without frame 

work), Lapping Compound, 

Letter/Number Inscription Punch 

and Honning Tools 

0.07 Kg 

2.36 Kg 

0.35 Kg 

Up to 3% of FOB 


C1065 Nozzles 1 kg 1 Non- Alloy/ Alloy Steel rounds 1.35 kg/kg content in 


C1066 Oil Bath Gear case 1 kg 1 MS Sheets 1.073 kg 

C1067 Passenger car (of 

specifications as per 

details given in the note 

below the norms) 

1 No. 1 EDD/DD CRCA Steel coil/sheets 333.5 kgs 

2 DD HR Steel coils/ sheets 32.65 kgs 

3 Terne coated sheets 9.5 kgs 

4 Adhesive sealants V.O. Grey 

sealer 

0.375 kg 

5 Adhesive sealants glass sealer 0.05 Kg 

6 Cold drawn section 0.128 kg 

7 Double raw ball bearing SKF 

No.4303 ANR TN9 

1 No. 

8 Fuel Filter 1 No. 

9 Carburettor 1 No.

10 Clutch Release Brg. KOYO 

No.RCT 4075 - 10S 

11 Prop. shaft bearing SKF 

No.1637459 

C211 

1 No. 

1 No. 

12 Cover Assy. Clutch 1 No. 

13 Clutch Disc. Assy. 1 No. 

14 High Tension Cable Assy. 6 No. 

15 Brg. - Needle Counter Nissan 

No.32219-G1000 

16 Brg. - Needle Main Nissan 

No.32264-18000 

17 Brg. - Needle Main Nissan 

No.32264-24900 

18 Brg. - Pilot Main Nissan 

No.32272-18000 

19 Brg. - Ball Main Nissan 

No.32273-G1000 

1 No. 

1 No. 

2 No. 

1 No. 

1 No. 

20 Rod Fork 1 & 2 1 No. 

21 Fork Shift 1 No. 

22 Fork Shift Reverse 1 No. 

23 Rod Fork 3 & 4 1 No. 

24 Lever Striking 1 No. 

25 Head Lamp 2 No. 

26 Front Director Indicator Lamp 2 No. 

27 Tain Lamp (with double 

filament) 

2 No. 

28 Tail Lamp (with single filament) 2 No. 

29 No. Plate Lamp 2 No. 

30 Rev. Warning Lamp 2 No. 

31 Roof Lamp 1 No. 

32 Foot Lamp 2 No. 

33 Side Indicator Lamp 2 No. 

34 2 Point Static Safety Seat Belts 1 Set 

35 Radial Tyre & Tubes 5 Nos. on net to net 

basis. 

36 AM/FM Radio cum cassette 

player with manual antenna 

These 2 inputs will 

be allowed on 

relevance 

37 Air-conditioner kits On net to net basis 

for those cars which 

are having 1 or 2 of 

these inputs. 

Note: Export product having the following specifications:1) Engine: 

a) Cylinders(in line)-4 

b) Cylinder capacity - More than 1000 & upto 1100 CC. 

c) Engine torque - 7.20 kg./3000 rpm 

d) Bhp - 41 hp/4800 rpm 

e) compression ratio -7.0:1 

f) Radiator frontal area - 0.148 sq.m. 

g) Radiator fan - 4 blades 

ii) Technical Data:

h) Maximum weight - 1270 kg. 

i) Length - 3930 mm 

j) Width - 1460 mm 

k) Height - 1468mm 

l) Boot capacity - 0.308 cu.m. 

m) Fuel tankcapacity - 38 lit. 

n) 4 speed gear box - Floor shift gear lever 

o) (4 forward + 1 rev) - Fully syncro forward speeds 

p) Brakes - Drum brakes on all 4 wheels 

q) Tyres - Opt.155 SR 14 

r) Front suspension - Upper & lower swingingarms, coil springs, double acting hydraulic shock absorbers 

& anti-roll bar 

s) Rear Suspension - Semi elliptical leaf springs, double acting hydraulic shock absorbers & anti-roll bar. 

C1068 Piston Pin/ Gudgeon Pin 1 kg 1 Non-Alloy/ Alloy Steel Round 1.25 kg 

C1069 Deleted. 

C1070 Polyacrylic Rubber Oil 

Seals 





C212 



b) Polyacrylic Rubber Compound 1.10 Kg/kg content in 


2 Composition of the Compound 

per Kg. : 

a) Polyacrylic Rubber 0.59 Kg 

2 b) Carbon Black 0.33 Kg 

c) Misc. Chemicals and Rubber 





Processing Oil 


C1071 Pump Oiler/Oil 

Cans/Grease Gun/Suction 

Gun 

1 kg 1 CRCA 

Sheets/Defectives/Seconds 

0.05 Kg 



product 

2 MS Wire Rods 1.06 kg/kg of net 


product 

C1072 Push rod 1Kg. 1 Non-Alloy/Alloy Steel rounds 1.30 kg 

C1073 Radiator Cap 1 kg 1 MS CRCA sheet/ strips/ coils 1.12 kg 



C1074 Radiator Cap 

1 kg 1 Stainless Steel/Mild Steel Strips 1.35 kg/kg content in 


C1075 Rear Axle Assembly for 

LCV/HCV 

(Assembly/SKD) 

2 Cover Cap,Spring Washer 

Spring, Main Valve, Large 

Gasket, Tubular Rivet, 

Retainer,Small Gasket protector 

River, Medium Gasket, Spring 

Vaccum Valve 

1 kg 1 HR Steel Plates/Coils (8 mm to 

15 mm) 

2 Castings (Rough/Machined) 

OR 

1.02 Nos./No. in 


1.83 kg/kg of Content 

in the export proudct. 

On net to net basis. 

2 Steel Scrap/Pig Iron 1.36 kg/kg of net 

content in the case of

C1076 Front/Rear Engine Auto 

Rickshaw in CKD/ 

SKD/CBU Condition (125 

CC to 200 CC) 

3 Forging (Rough/Machined) 

OR 

3 Non-Alloy/Alloy Steel 

Bars/Rods/ Billets/Blooms/ 

Ingots 

4 Relevant Bearings. Net to net. 

5 Bolts/Nuts/Washers/ 

Shims/Spacers/Oil Seals/Gaskets 

6 Misc. items and Cuttings Tools, 

Gear Cuttings Blades, Cutters, 

Taps, Chasers, Burnishing Tools/ 

Lapping Compound/Rust 

Preventives(to be 

specified)/Lubricants (to be 

specified)/Dyes/Die Block, Die 

Steel/Electrods/Welding 

Wire/Welding Fluxes. 

1 No. 1 Cold Rolled (Prime) Steel 

Sheets/Strips/Steel 


2 Hot Rolled (Prime) Steel 


C213 

rough castings. 

OR 


content in the case of 

machined castings. 

On net to net basis. 



rough forgings 

OR 1.70 kg/kg of net 


machined forgings. 

1.05 Nos./No. of 

Fasteners in the 



value of exports.. 





3 Aluminium Alloy Ingots 1.07 Kg/Kg content 


4 Seamless Steel Tubes 1.02 Kg/Kg content 


5 Super Enamelled/ Enamelled 

Copper Wire 



6 Natural Rubber 1.05 Kg/Kg content 


7 Plywood 1.05 Sq.Mtr/Sq.Mtr 


product 

8 Polyol 1.05 Kg/Kg content 


9 Isocynate 1.05 Kg/Kg content 


10 Butyl Rubber 1.05 Kg/Kg content 



(NBR/SBR/PBR) 

12 Carbon Black 0.40 Kg 


Granules 





14 Polypropylene Granules 1.05 Kg/Kg content 


15 Paints 1% of FOB value 

16 PVC/Artificial Leather Cloth 1.05 Sq.Mtr/Sq.Mtr 


product

17 Nylon Granules 1.05 Kg/Kg content 


18 Main Shaft Assembly Net to net 

19 Crank Shaft Assembly Net to net 

20 Relevant set of gears - 1 set each Net to net 


22 Rear Shock Absorber set Net to net. 




26 Relevant Set of Bearings 1 - Set Net to net. 



29 Rear View Mirror Set Net to net. 

30 Wiring Harness set Net to net. 


32 Rear Suspension Spring (1 Set = 

2 Nos.) 

C214 

Net to net. 



35 Auto Switches Set Net to net. 

36 Rotor Net to net. 

37 Starting Tube Net to net. 

38 Automotive lights with bulbs -1 

set. 

Net to net. 

39 Clutch Bush Net to net. 

40 Wheel Axle Assembly Net to net. 

41 Magnet container assembly/Rotor Net to net. 

42 Lock Assembly Net to net. 

43 Set of Gears Net to net. 


45 Petrol Lock Complete Net to net. 


47 Tool Kit Complete Net to net. 

48 Needle Bush (1 Set = 3 Nos.) Net to net. 

49 Silicon Diode Assembly Net to net. 


51 Differential Assembly Net to net. 

52 Pivot Pin Assembly Net to net. 


54 Starter Gear Net to net. 

55 Front Brake Drum Assembly Net to net. 

56 Wiper Motor Net to net. 

57 Rear Wheel Axle Assembly Net to net.

58 Wiper Assembly Net to net. 

59 Complete clutch control shaft Net to net. 

60 Lever Sector Complete Net to net. 


62 Slider and slider block Net to net. 

63 Propeller Shaft Assembly Net to net. 

64 Trailing Arm Assembly Right & 

Left (1 Set = 2 Nos.) 

C215 

Net to net. 

65 Side Glass (1 Set = 2 Nos.) Net to net. 

66 Manifold Net to net. 

67 Coir (1 Set = 2 Nos.) Net to net. 

68 Hydraulic Brake Assembly Net to net. 

69 Windshield Net to net. 

70 Starter Motor - 1 No. Net to net. 

71 Cylinder Head Casting - 1 No. Net to net. 

72 Flexible Coupling/ Flange - 2 

Nos. 

Net to net. 

73 Valve Set - 1 No. Net to net. 

74 Hub (set of 2) - 1 Set Net to net. 

75 Reverse Motion Shaft - 1 No. Net to net. 

76 Set of rings -1 Set Net to net. 

77 Set of Seals - 1 Set Net to net. 

78 Cones - 2 Nos. Net to net. 

79 Starting Ring Gear - 1 No. Net to net. 

80 Rod Control Lever Sub-Assy- 1 

No. 

81 Lever Group for Max Controlling 

-1 No. 

Net to net. 

Net to net. 

82 Regulating Lever Assly - 1 No. Net to net. 

83 Lever GR Stop Control - 1 No. Net to net. 

84 Spark Advance Regulator Assly - 

1 No. 

Net to net. 

85 Clutch Gears Cross - 1 No. Net to net. 

86 Set of Spacers - 1 Set Net to net. 

87 Valve for Piston cooling - 1 No. Net to net. 

88 Screw - 1 No. Net to net. 

89 Oil Plug Assly -1 No. Net to net. 

90 Anti Vibration Mounts - 3 Nos. Net to net. 

91 Cross -1 No. Net to net. 

92 Catalytic Converter - 1 No. Net to net. 

93 CNG Cylinder - 1 No. Net to net. 

94 CNG/ LPG Kit (Excluding 

Cylinder) - 1 Set. 

Net to net. 

95 Tyre (Set of 4 nos.)- 1 Set Net to net. 

96 Crankcase - 1 No. Net to net.

C1077 Hose Assembly having 

different lengths 

C1078 Rocker Arm/ Rocker 

Shaft 

C1079 Roller for auto break 

shoe 

C1080 Rotor for Altemotor 


175 CC Scooter in 

CKD/SKD/ CBU 

Condition 

97 Crankcase cover - 1 No. Net to net. 

98 Isolator Vibration - 3 No. Net to net. 

99 Fan Cowl - 1 No. Net to net. 

1 Mtr 1 Hydraulic Break Hose of relevant 

dia and material 

1 kg 1 Steel Bar/Rods of Relevant 

Grade. 

1.0 kg 

Content of 

Import Item 

1 kg 1 Copper Electrolytic Grade 

Standard Wire/Bar/Rod 

2 C.R. Steel Sheet Extra Deep 

Drawing Quality 0.8 mm to 1 

mm thick 

C216 

1.02 Meter/Meter 

content of export 

product 

1.39 kg 


3 Steel Rod Free Cutting 

ENIA/SAE 8620 or equivalent to 

5 to 36 mm Dia 

4 Solder Tin 60% to 80% Lead 

40%-20% 

5 Poloyester Sheet/Strip/Film 25 to 

200 Micron Thick 


export 


export 

Value Limited to 1% 

of FOB value of 

exports 


export 

1 No. 1 CRCA Steel Sheets/Strips/Coils. 1.30 kg/kg content in 


2 Terne/Zinc Coated Steel 

sheets/strips/coils 

3 Hot Rolled Steel 


4 Seamless Carbon/Alloy Steel 

Tubes 

OR 

Steering Column Assembly 1 No. 










Copper Wire 












(NBR/ PBR/ SBR) 



12 Carbon Black 0.1007 gm 

13 Nylon Granules 1.05 kg/kg content in 


14 ABS Plastic Granules 1.05 kg/kg content in 




16 Polyvinyl Chloride (PVC) 1.05 kg/kg content in

C217 

Granules the export product. 

17 PVC/PU Leather Cloth 1.05 kg/kg content in 



19 Polycarbonate Moulding Powder 700.00 gm 

20 Primer 1.00 Ltr. 

21 Clear Acrylic (Lacquer) 0.83 Ltr. 

22 1 K Primer 0.40 Ltr. 

23 Clear 1K/2K (Lacquer) 0.40 Ltr. 

24 Desmodur-PA 50/Suprasec 2082 100.00 gm 

25 Auto Lamps & Bulbs Net to net. 

26 Auto Lubricating System (Mix 

Gear Asly.) 

Net to net. 


28 Bearing Set Net to net. 

29 Belt Drive Net to net. 

30 Brake Drums Net to net. 

31 Brake Hose Asly. Net to net. 

32 Brake Shoe Set Net to net. 


34 Carburetor Assembly Net to net. 


36 Clutch Asly Net to net. 

37 Control Cable Assembly Net to net. 

38 Crankshaft Assembly Net to net. 

39 Cross Net to net. 


41 Disc Brake & Caliper Asly. Net to net. 

42 Drive/Mainshaft Assembly Net to net. 

43 Electronic Components 

(Thyristors,Terminals, Capacitor, 

Diodes, Traicm Resistors Scr. 

Net to net. 

44 Front/Rear Blinker Net to net. 

45 Front Brake Lever Net to net. 

46 Gasket Set Net to net. 

47 Gear Shifter Asly Net to net. 

48 Hand Grips Net to net. 


50 Ignition Coil Net to net. 

51 Inner Movement 

Assembly/Speedo meter 

Complete 

Net to net. 

52 Lock & Key Set Net to net. 

53 Magneto Net to net. 

54 Master Cyl Asly Net to net.

C1082 Semi Metallic Asbestos 

Disc Brake Pads 

C1083 Shallow Well hand pump 

with PVC riser main 

pump rod, well screen, 

Lower casing & upper 

55 Mirrors Net to net. 

56 Module for Buzzer Net to net. 

57 Needle Bearing Set Net to net. 

58 Petrol Cock Net to net. 

59 Pin, Socket Double Lance Type Net to net. 

60 Pinion with free Wheel Net to net. 

61 Piston Asly (Piston, Rings, Pin, 

Circlip) 

C218 

Net to net. 

62 Regulator, Flasher, Beeper, Etc. Net to net. 

63 Reinforcement Plate Net to net. 

64 Selector Spider Net to net. 

65 Set of Gears Net to net. 

66 Set of Oil Seal Net to net. 

67 Shaft for Free Wheel Net to net. 

68 Shock Absorber Net to net. 

69 Single Gear Control System Net to net. 



72 Stickers and Labels Net to net. 

73 Switches Net to net. 

74 Tensioner Asly Net to net. 


76 Tyres Net to net. 

77 Valve Air Control Net to net. 

78 Windshield Beading Net to net. 


80 Hot Dies Steel Blocks, High 

Speed Steel, Inserts, Cutting, 

Tools, Grinding Stones, 

Adhesives and Sealants, Steel 

Shots. 

1 kg 1 Resin 0.17 kg 

2 Asbestos Raw in different grades 0.20 kg 

1 No (Net wt 

of Pump - 

minimum 

40.5 kgs) 



Powder, Nitrile Butile Rubber, 


Adhesive 







Bar 





export 



export 

10.7kg 

casing. 2 Pig Iron 0.3 kg

3 Nitrile Rubber 0.783 kg 


Rounds 

C219 

0.68 kg 

5 Zinc 0.9 kg 

6 PVC Resins 23.98 kg 

7 Stabilizer for PVC 0.816 kg 

8 Flow Promoter 1.011 kg 

9 Impact Modifier 1.011 kg 

10 Filler (Calcium Carbonate) 1.011 kg 

11 Colouring Pigments 0.004 kg 

12 Titanium Dioxide 0.884 Kg 

13 Cycle Hexamon/MIBK 0.78 Kg 

Note : 1. Quantity of different items in item No. 6 to 13 is for 29 Kgs of PVC Compound. In case of higher 

content of Plastics in the pumps, the weight of different items covered by these Sl. No. may be worked out 

on pro-rata basis. 

C1084 Silencer PGT Black BCP 1 kg. 1 CRCA Coil/ Sheet 1.110 kg 

(Partially Black Painted 

& Nickel Plated 

2 

3 

M.S. Wire Rod 

M.S. Round 

0.022 kg 

0.154 kg 

C1085 Silicon Rubber Oil Seals 

C1086 Sintered Bronze Bushes 

& Parts 'SB' Grade 

C1087 Sintered Bronze Bushes 

and Parts `D' Grade 








b) Silicon Rubber Compound 1.10 Kg/kg content in 


2 Composition of the Nitrile 

Rubber Compound per Kg. : 

a) Silicon rubber 0.958 Kg 

b) Red Colour Pigment 0.01 Kg 

c) Orange Colour Pigment 0.0038 Kg 

d) Red Iron Oxide 0.022 Kg 

e) Varpx 0.0043 Kg 

1 Kg 1 Copper Mill Scale Min. 80% 

Copper in Natural State 

OR 

1.276 kg 

1 Copper Powder 

Electrolytic/Atomised 

0.96 kg 

2 Tin Ingot Min. 98% Purity 

OR 

0.0944 kg 

2 Tin Powder 0.093 kg 


4 Lubricating Oil 0.0403 kg 

5 Misc. Items: Graphite Powder, 

Jig Grinnding Wheels and 

Honing Stones 



OR 

CIF value shall not 

exceed Rs. 3.70 per 

kg of product 

exported 

0.9183 kg

C1088 Sintered Iron Bushes & 

Parts Category IC 

C1089 Sintered Iron Bushes & 

Parts Category ID 

C1090 Sintered Iron Bushes and 

Parts Category - IA 

C1091 Sintered Iron Bushes and 

Parts Category IB 



2 Tin Ingot Min. 98% Purity 

OR 

C220 

0.6914 kg 

0.0552 kg 



4 Iron Powder Sponge/Atomised 0.3084 kg 


6 Misc. items: Jig Grinding Wheels 

and Honing Stones 



OR 

Value not to exceed 

Rs. 2.43/kg of 

exported product 

0.084 kg 

1 Copper Electrolytic/Atomised 0.0638 kg 


3 Solid Lubricant powder 0.0106 kg 


5 Misc. items: Ferro Phosphorous 

Powder/Manganese Sulphide 

Powder/Graphite Powder, Jig 

Grinnding Wheels and Honing 

Stones 



OR 





kg of product export 

0.1975 kg 

0.1507 kg 




5 Misc. Items: Natural Graphite 

Powder /Tin Powder, Jig 

Grinnding Wheels and Honing 

Stones 



kg of product 

exported 

1 Kg 1 Iron Powder Sponge/Atomised 1.041 kg 



4 Misc. items: Copper Mill 

Scale/Copper Powder/Ferro 

Phosphorous Powder/Manganese 

Sulphide Powder, Jig Grinnding 

Wheels and Honing Stones 



kg of product 

exported 



OR 

0.042 kg 



0.0319 kg 




5 Misc. items: Ferro 

Phosphorous/Manganese 


exceed Rs. 4.00 per

C1092 Sleeve Shaft and Ball 

Joint 

Sulphide Powder/Natural 

Graphite Powder, Jig Grinnding 

Wheels and Honing Stones 

C1104 Stainless Steel Rear 1 kg 1 

C221 

Stainless Steel Sheets/Coils 304 

Grade 0.63 mm Thickness 

kg of product 

exported 

1Kg. 1 Non-Alloy Steel Round/ Billets 1.10 kg/Kg content in 


C1093 Slip Ring 1 No 1 Copper electrolytic grade 


0.04 Kg 

C1094 Slip Stub Shaft 1.Kg. 1 Non-Alloy Steel Round/ Billets 1.500 kg 

C1095 Solenoid Switch Preengaged 

type 

C1096 Solenoid Swtich Co-axial 

type 



0.42 Kg 



0.9 Kg 






0.03 Kg 



0.1 Kg 



0.25 Kg 



4 Solder Tin - 80 % Lead - 20 % 0.01 Kg 



0.02 Kg 

C1097 Spindles 1Kg. 1 Non-Alloy/ Alloy steel rounds 1.47 kg 

C1098 Spline Hub for Clutch 

Plates 

C1099 Spokes (Galvanised) 

C1100 Sprocket 

C1101 Sprocket with central 

axle 

C1102 Stainless Steel Front 

Centre Cap - 

(Automobile) 1 Set 

Comprising of: 

a)Front Hub Cover - 2 

No. 

b)Retainer Rings - 1 No. 

c)Hexagonal Caps - 16 

Nos. 

C1103 Stainless Steel Front 

Wheel Cover 

(Automobile) 

1 kg 1 Alloy Steel Bars 1.80 Kg/Kg content 


1Kg. 1 Medium Carbon steel wire rod/ 

MS wire rod 

1.050 kg/Kg content 


2 Zinc 0.05 kg/ kg wt of the 

spokes to be 

galvanised 

1 kg. 1 CRCA Coil/ Sheet 1.43 kg 


1Kg. 1 M S Plate 1.80 kg/Kg content in 


2 Non-Alloy Steel Round/ Billets 1.150 kg/Kg content 


1 kg 1 Stainless Steel Sheets/Coils 304 


2.275 kg 



2.015 kg 

2.077 kg

Centre Cap - 

(Automobile) 1 Set 


a)Rear Hub Cover -2 No. 

b)Retainer Rings -2 No. 

c)Hexagonal Caps -16 No. 

C1105 Stainless Steel Rear 

Wheel Cover 

(Automobile) 

C1106 Starter Motor Armature 

for Low Speed Vehicles 

C1107 Starter motor with 

maximum current 1100 

Amps 

C1108 Starter motor with 

maximum current 800 

Amps 

C1109 Stator for alternator for 

Light Duty (12 Volts 60- 

95 Amps) 

C1110 Submersible Water pump 

sets comprising of 

Pumps, Motors, 

Pumpsets & Accessories 

thereof such as cable, 

control panels & pipes 

(Capacity from 30 to 90 



C222 

1.75 kg 



0.8 Kg 



3.5 Kg 



4 Solder Tin - 80 % Lead - 20 % 0.02 Kg 



0.04 Kg 



3.3 Kg 



13 Kg 



4 Solder Tin - 80 % Lead - 20 % 

RC 16 SWG 

0.03 Kg 




0.06 Kg 



2.5 Kg 



10 Kg 



4 Solder Tin - 80 % Lead - 20 % 

RC 16 SWG 

0.03 Kg 




0.06 Kg 



0.44 Kg 



2 Kg 




0.02 Kg 

1 set 1 Copper Rod/Winding Wire or 

Copper Wire Bar 

28.5 Kgs 

2 Bronze Metal 9.3 Kgs 

3 CI Castings 

OR 

51.6 Kgs 

3 Pig Iron 67.1 Kg 

4 Stampings 88 Kg

HP) (Minimum export 

product weight not less 

than 237.4 Kgs.) 

C1111 Submersible water pump 

sets comprising of 

Pumps, Motors, 

Pumpsets & Accessories 

thereof such as cable, 

control panels & pipes 

(capacity from 7.5 to 30 

HP) (Minimum export 

product weight not less 

than 99.5 Kgs.) 

C1112 Submersible Water 

Pumps Set comprising of 

Motors, Pumpsets & 

Accessories thereof such 

as cable, control penals & 

pipes (capacity upto 7.5 

HP) 

C1113 Thinwalled Engine 

Bearing Bushings and 

Thrust Washers in Steel 

backed Lead based white 

Metal Alloy GL-14/ SAE- 

14 


Bearings Bushings and 


Backed Aluminium Tin 

Alloy GA-17G/A-17X 


Bearings Bushigs and 


C223 

OR 

4 CRNGO Steel Sheet/Coil/Strips 157 Kg 

5 ERWSS Tube/Rods-Grade AISI 

304/316/431 

60 Kgs. 

6 Relevant Rubber/Plastic Parts Net to Net 

1 set 1 Cooper Rod/Winding Wire or 

Cooper Wire Bar 

14.4 Kgs 

2 Bronze Metal 4.5 Kgs 

3 CI Castings or Pig Iron 31.6 Kgs. 41.1 Kg. 

4 Stamping or CRNGO Steel 

Sheet/Coil/Strips 

28 Kgs. 50 Kgs 

5 ERWSS Tube/Rods - Grade AISI 21.0 Kgs. 

304/316/431 

6 Relevant Rubber/Plastics Parts Net to Net 

1 Set. 1 Copper Rod/Winding wire OR 


5.1 Kg 

2 Bronze Metal 1.5 Kg 

3 Pig Iron 34 Kg 

4 CRNGO Steel Sheet/Coil/Strip 31 Kg 

5 ERWSS Tube/Rods Grade AISI 

304/316/431 

14 Kg 

6 Rubber/Plastic Parts 

OR 

Net to Net 

6 a) Synthetic Rubber 1.05 Kg/Kg content 

in export 

b) LDPE Moulding Powder 1.05 Kg/Kg content 

in export 

c) HDPE Moulding Powder 1.05 Kg/Kg content 

in export 

d) PP Moulding Powder 1.05 Kg/Kg content 

in export 

e) ABS Moulding Powder 1.05 Kg/Kg content 

in export 

100 kgs 1 CR Steel Strips 89.01 kgs. 

2 Lead 47.57 kgs. 

3 Tin Ingots/Scraps 6.33 kgs. 

4 Antimony Ingots/Scraps 9.50 kgs. 

100 kgs 1 CR Steel Strips 114 kgs. 

2 Copper Wire Bars/ Cathodes/ 

Ingots/ Rods/ Scrap 

0.15 kg. 

3 Lead 0.40 kg 

4 Tin Ingots/Scraps 2.59 kg. 

5 Aluminium 

Ingots/Sheets/Foils/Scraps 

17.79 kgs. 

6 Antimony Ingots/Scraps 0.07 kg. 

7 Silicon 0.54 kg. 

100 kgs 1 Steel backed Copper-Lead Strips 

generally conforming to KS- 

30/F-14/SAE-48/SL 

138.33 kgs.

acked Copper based 

Alloy GS-30/KS-30/ F- 

14/SAE-48/SL 




backed Lead based white 

Metal Alloy GL-15/ F- 

23/L-200/G-24/SAE-15 




backed Copper based 

Alloy GS- 10/LS-10/ G- 

46/SAE-797/SY/F-100/F- 

59 




backed Copper Lead 

Alloy of GS- 23 /LS-23/G- 

48/SAE-799/SX/F-250/F-7 




backed Copper based Tin 

Alloy GS-25/KS-25/SAE- 

49/SP 


Bearings, Bushing and 

Thrust washers in Steel 


Alloy F- 

770/SL/KS30/GS30/F-14 




Backed Copper base 

Alloy SL/KS 30/GS 30/F- 

14/SAE 48/SP/ KS 25/GS 

25/G 41/F 770-780/H 24/F 

112/SAE 49/SY/F 100/HF 

2/LS 10/GS 10/G 46/SAE 

797/SX/F 250/HF 16 OR 

H 116/LS 23/GS 23/G 

48/SAE 799 




Backed Aluminium Base 

Alloy F-820/ or F- 

157/TR-20/GA 20/A 20/G 

74/SAE 783/AS 15/GA 

100 kgs 1 CR Steel Strips 82.65 kgs. 

2 Lead 47.57 kgs. 

3 Tin Ingots/Scraps 0.56 kg. 

4 Antimony Ingots/Scraps 8.15 kgs. 


generally conforming to LS- 

10/G-46/SAE-797/SY/F-100/F-5 


generally conforming to LS- 

23/G-48/SAE-799/SX/F-250/F-7 


generally conforming to KS- 

25/SAE-49/SP 

C224 

142.14 kgs. 

141.95 kgs. 

139.13 kgs. 

100 kgs 1 C.R. Steel Strips 92.39 kg 

2 Copper Wire 

Bars/Cathodes/Ingots/Rods/Scrap 

36.76 kgs 

3 Lead 14.00 kgs 

4 Tin Ingots/Scraps 0.20 kgs 

100 kgs 1 C.R. Steel Strip 97.50 kgs 

2 Copper Lead Alloy Atomised 

Powder Generally conforming to 

SL/KS 30/GS 30/F-14/SAE 

48/SP/KS 25/GS 25/G 41/F 770- 

780/H 24/F 112/SAE 49/SY/F 

100/HF 2/LS 10/GS 10/G 

46/SAE 797/SX/F 250/HF 16 or 

H 116/LS 23/GS 23/G48/SAE 

799 

50.80 kgs 

100 kgs 1 C.R. Steel Strip 134.03 kgs 

2 Aluminium Tin Based Clad 

Alloy to F-820/or F-157/TR- 

20/GA 20/A 20/G 74/SAE 

783/AS 15/GA 17G/A 17X/A 

6/GA 6/A 300/G 73/SAE 770- 

780 

23.29 kgs

17G/A 17X/A 6/GA 6/A 

300/G 73/SAE 770-780 




Backed Aluminium Tin 

Base Alloy GA 6/ A 6/G 

73/A 300/ SAE 770/AS 11 


Bearings, Bushings and 

thrust Washers in Steel 


High Tin Alloy F- 

780/SP/H24/GS25/KS25/ 

G-41/SAE-49 

C1125 Thinwalled engine 


thrust washers in Steel 


Alloy F- 

100/SY/HF2/LS10/GS10/ 

Glyco-46/SAE-792 





Alloy F-250/SX/HF 16 

OR H 116/LS-23/GS- 

23/Glyco-48/SAE-799 




backed Aluminium Based 

Alloy AS-15/F-820/F- 

157/GA-20/A-20/G- 

74/TR-20/SAE-783 




backed Aluminium Based 

Alloy AS-11/GA-6/A-6/G- 

73/A-300/SAE-770 

100 kgs 1 Steel Backed Aluminium Tin 

Bimetal Strips to GA 6/A 6/G 

73/A 300/SAE 770/AS 11 

C225 

148.09 kgs 


2 Copper Wire 


38.14 kgs 




2 Copper Wire 


39.83 kgs 




2 Copper Wire 


37.77 kgs 




2 Copper Wire 


0.23 kgs 


4 Aluminium Ingots/Sheets/ 

Foils/Scraps 

17.77 kgs 



Ingots/ Rods/ Scrap 

0.20 kgs 


4 Aluminium Ingots/ 

Sheets/Foils/Scraps 

18.28 kgs 

5 Nickel Bars & Rods 0.20 kgs 

C1129 Thinwalled engine 100 kgs 1 C.R. Steel Strips 111.76 kg 



2 Copper Wire 

Bars/Cathodes/Ingots/ 

1.73 kgs 

backed Tin Based White 

Rods/Scrap 

Metal Alloy L-2/GL- 


12/W-90/G-32/B- 

100/SAE-12 

4 Antimony Ingots/Scraps 3.95 kgs 

C1130 Thinwalled engine 100 kgs 1 C.R. Steel Strips 87.39 kg 

Bearings, Bushings and 2 Lead 45.66 kgs


backed Lead Based 

White Metal Alloy GM- 

155/GL-13/L-100/F- 

99/SAE-13 




backed Aluminium Tin 

Alloy F-820 or F-157/TR- 

20/GA-20/A-20/G- 

74/SAE-783/AS-15/GA- 

17G/A-17X 




backed Aluminium Tin 

Alloy AL-6 




backed Aluminium Lead 

Alloy F-66/AL-6M 




backed Tin Based Babbit 

Alloy to F-1/GL-12/W- 

90/G-38/B-100/SAE-12/L- 

2 




backed Lead based 

Babbit Alloy to F-23/L 

200/GL-13/L-100/F- 

99/SAE-13/GM-155 




backed Cast Copper 

based Alloy to F-112/F- 

77/F-770/G-41 

C1137 Top Link Assembly for 

Tractors (consisting of 

Tommy Bar, 

Replacement Ball, 

Replacement End, Centre 

Tube and Locking 

Collar)-Galvanised 


4 Antimony Ingots/Scraps 5.44 kgs 

100 kgs 1 Steel backed Aluminium Tin 

Strips to F-820 OR F-157/ TR- 

20/GA-20/A-20/G-74/SAE- 

783/AS-15/GA-17G/A-17X 

100 kgs 1 Steel Backed Aluminium Tin 

Strips to AL-6 

100 kgs 1 Steel Backed Aluminium Lead 

Strips To F-66/AL-6M 

100 kgs 1 Steel Backed Tin Based Babbit 

Alloy Strips to F-1/GL-12/W- 

90/G-38/B-100/SAE-12/L-2 

100 kgs 1 Steel Backed Lead Based Babbit 

Alloy Strips to F-23/L 200/GL- 

13/L-100/F-99/SAE-13/GM-155 

100 kgs 1 Steel backed Cast Copper Lead 

Strip to F-112/F-77/F-770/G-41 

1 kg 1 For Tommy Bar: 


Rounds/Bars/Rods 

2 For Top Link Replacement End: 



3 For Replacement Ball: 



4 For Centre Tube: 

Seamless Non Alloy Steel Tubes 

C226 

142.73 kgs 

140.96 kgs 

141.49 kgs 

133.29 kgs 

146.47 kgs 

152.17 kgs 





3 kg/kg content in the 



the export product

C1138 Tractor Brake Assembly 

C1139 Tractor Parts - Ratchet 

Jack Assembly 

C1140 Unibody Compressors 

(Oil Injected Rotary 

Screw Compressors 

suitable to drive with V- 

Belts and Electric 

Motors, Oil Engine and 

any other suitable drive) 

5 For Locking Collar: 

HR Sheets 

C227 



6 Zinc for Electroplating 0.010 kg/kg of Steel 


product 

7 Misc Items: 

Die Steel, Cutting Tools, Taps & 

Drills, Lubricants 

1 No. 1 HR Steel Sheet, HR Steel Plates, 

Bright Bar 

2 Lining, Shoe Hold Downpin, 

Ancher Pin Steady Post HT Nuts 

Grommet 


FOB value of 

exports. 



Net to net. 

3 Spring Steel Wire 1 kg/kg content in 


4 Shoe Dip Bending Adhesive Tri- 

chloroethylene 



1 No. 1 Seamless Steel Tube 1.15 kg/kg content in 


2 Non-alloy steel Rounds 1.72 kg/kg content in 


3 H.R. Sheet 2.13 kg/kg content in 


4 Spring Wire 1.14 kg/kg content in 




6 Non Alloy Steel/Wire Rod 1.17 kg/kg content in 


7 Misc. Items: Die Steel, Cutting 

Tools, Drills, Grinding Wheels, 

Carbide Die, Reams, Machine 

Blades and Welding Wire 



100 Nos 1 Roller Bearings 200 Nos. 

2 Taper Bearings/ Taper Roller 

Bearings 

400 Nos. 

3 SHIM 570 Nos. 

4 Spring 200 Nos. 

5 Glyd Ring (Teflon Ring) 100 Nos. 

6 Valve MPCV 100 Nos. 

7 Screw 100 Nos. 

8 Cartridge 100 Nos. 

9 Shaft Seal 100 Nos. 

10 Sight Glass 100 Nos. 

11 Black Ball 60 Nos. 

12 Valve BD 100 Nos. 

13 White Ball 42 Nos. 

14 Separator Element 100 Nos. 

15 Rotor Set 100 Nos. 

16 Oil Filter Elbow 100 Nos. 

17 Non Asbestos Gasket sheet of 

size 1/32, 1/64" and 1/16" 

117.65 kg

C1141 Universal Joint for 

Automobiles 

C1142 V-Belt Cover BcP 

C1143 Vaccum Potted Ignition 

Coil other than those 

covered by Sl. Nos. 1049 

& 1050 

1 No 1 Needles Net to net 

2 Seals 4 Nos 

3 Plastic Inserts 4 Nos 

1 kg. 1 CRCA Sheet/ Coils 1.40 kg 


1 No. 1 Case Moulding 1 No. 

2 Screw Terminal 1 No. 

3 Primary Bobbin 1 No. 

4 Irradiation Cable (Black/Ziba) 0.1 Meter 

5 Irradiation Cable (Black/White) 0.12 Meter 

6 Male Terminal 1 No. 

7 Terminal 1 No. 

8 Sumi Tube 0.02 Meter 

9 Rubber Tube 2 Nos. 

10 Z. Sleeve 1 No. 

11 Core Assembly 1 No. 

12 Copper Wire 15 MEW(0.45 mm) 0.05 kg 

C1144 Valve Tappets 1Kg. 1 Non-Alloy/ Alloy Steel rounds 1.30 kg 

C1145 Voltage Regulator 1 No 1 CR Steel Sheet Extra deep 

drawing 

0.5 Kg 

2 Steel rod free cutting ENIA/SAE 

8620 or equivalent 5-35mm dia 

0.1 Kg 

3 Solder, Tin - 80%, Lead - 20% 0.005 Kg 

C1146 Wheel Pulley MB with 

ZP Lever(Lever plated 

with Zinc and wheel 

Pulley Painted) 

C1147 Aluminium Alloy Billet 

(6063) 

C1148 Aluminium Alloy Ingot 

(IM-2) 

C1149 Aluminium Forgings 

4 Contact Point-tungsten 6 Nos 

1 kg. 1 CRCA Coil/ Sheet 1.035 kg 

2 H.R. Coil/ Sheet 0.219 kg 

3 M.S. Round 0.348 kg 

4 M.S. Wire Rod 0.017 kg 

5 Zinc 0.0064 kg 

1 MT 1 Magnesium 12.5 kgs 


3 Caustic Soda (100% Basis) 128.4 kgs 

4 Calcined Petroleum Coke 399.8 kgs 

5 C.T. Pitch 104.4 kgs 

6 Aluminium Flouride 20.2 kgs 

1 kg 1 Aluminium Scrap 0.894 Kgs 

2 Nickel coated (Unwrought) 0.0105 kgs 

3 Silicon metal 0.1205 kgs 

4 Zinc 0.0125 kgs 

1 MT 1 Aluminium Ingots 1.10 MT 

2 Misc. Items: Cutting Tool, 

Grinding Wheels, Furnace Oil, 

Anti- rust Oil 

C1150 Aluminium Ingots / 1 MT 1 Caustic Soda Lye (Containing 

minimum 47% Caustic soda with 

C228 



product. 

348.94 kg

Aluminium Sow Ingots 

C1151 Deleted 

C1152 Aluminium Wire Bar/ 

Rod 

C1153 Antimonial Lead 

Alloy/Lead Calcium 

Alloy/Lead based Alloy 

(Minimum Lead content 

98%) 

C1154 Deleted 

C1155 Deleted 

C1156 Deleted 

C1157 Deleted 

C1158 Bimetal Strips in Steel 


generally conforming to 

F 770/SP/ SAE 49/GS 

25/KS 25/F 780/H 24/G 

41/F 112 




F 100/SY/ SAE 797/GS 

10/LS 10/G 46/HF 2 




F 250/SX/ SAE 799/GS 

23/KS 23/HF 16/H 116/ G 

48 

C229 

Sodium content 164 kg.) 

OR 

Alumina Calcined 1920 kg 

2 Pre-baked anode 

OR 

Raw material for pre baked 

anode 

442.44 kg 

a) Calcined Petroleum Coke 451 kg with 1% 

wastage 

b) Coal Tar Pitch 110 kg (inclusive of 

1% wastage) 

3 Aluminium Fluoride 20.77 kg 

4 Furnace Oil (for baking) 90 L 

5 Non-coking Coal 11.73 MT 

1 MT 1 Caustic Soda Lye (containing 

min. 47% caustic soda) 

2 Calcined Petroleum Coke (CP 

coke) 

348.94 kgs (Total 

Soda content 164 

kgs) 

0.46 MT 

3 Coal Tar Pitch 0.11 MT 

4 Aluminium Fluoride 20.7 kgs 

1 MT 1 Lead BatteryPlates covered by 

ISRI Code word "Rails" 

1.587 MT 

100 kgs 1 Steel Strips 77.00 kgs 

2 Copper Wire 


23.13 kgs 


4 Tin Ingots/Scraps 0.32 kg 


2 Copper Wire 


28.73 kgs 




2 Copper 

Wire/Bars/Cathodes/Ingots/Rods/ 

Scrap 

25.84 kgs 



C1161 Bimetal Strips in Steel 100 kgs 1 Steel Strips 77.14 kgs 

backed Copper based 2 Copper Wire 25.06 kgs


F 780 




F 80/SAE 789 




SL/SAE 48/ KS 30/GS 

30/F 14 



generally conforming to 

SY/SAE 797/SX/SAE 

48/GS 10/LS 10/ F 100/G 

46/HF 2/ GS 25/KS 25/F 

112/G 41/H 24/F 770/F 

780/GS 23/LS 23/ F250/ G 

48/H 116/HF 16/GS 

30/KS 30/F 14/SAE 

799/SP/SAE 49/SL 

C1165 Brass Blanks (Discs)/ 

Brass case Blanks(Discs) 

for Defence application 

C1166 Brass extruded Hollow 

sections such as pipes/ 

tubes 

C1167 Brass extruded solid 

sections including Bars 

and Rods 

C1168 Brass Foil 

C230 





2 Copper 


Scrap 

35.22 kg 




2 Copper 


Scrap 

21.90 kgs 




2 Copper Based Alloy Powder to 

SY/SAE 797/SX/SAE 48/GS 

10/LS 10/F 100/G 46/HF 2/GS 

25/KS 25/F 112/G 41/H 24/F 

770/F 780/GS 23/KS 23//F 

250/G 48/H 116/HF 16/GS 

30/KS 30/F 14/SAE 799/SP/SAE 

49/SL 

31.25 Kgs 

1 Kg 1 Zinc 1.10 Kg. per kg. 


product 

2 Copper Wire 

bars/Cathodes/Ingots/Rods 

1 kg. 1 Brass scrap 

OR 

Brass Ingots/Billets. 

1 kg 1 Brass scrap 

OR 

Brass Ingots/Billets. 

1 kg 1 Copper Cathode/Ingots 

OR 

1.10 Kg. per kg. 


product 

1.08 Kg 

1.02 Kg. 

1.08 kg 

1.02Kg. 



1 a) Copper Scrap 1.075 kg/kg content 


2 Zinc Ingot 1.05 kg/kg content in 


C1169 Brass strips/ Sheets 1 kg 1 Brass Scrap 1.07 kg 

C1170 Brass Strips/Sheets 

1 kg 1 Copper Wire 

Bar/Cathode/Ingot/Rod 

or 

Copper Scrap 


export 

OR 

1.075Kg/Kg content 


2 Zinc Ingots 1.05 kg/kg content in 

export 

C1171 Brass Washers of all 1 kg 1 Brass scrap 1.100 kg

types 

C1172 Brass Wire 

1 kg. 1 a) Copper Wire Bar/Cathode 1.05 kg/kg content in 

export 

b) Zing Ingot 

OR 

C231 


export 

OR 

Brass Scrap of relevant grade. 1.08 kg/kg content in 

export 

C1173 Brass Wood Screw 1 Kg. 1 Brass Scrap 1.10 Kg/Kg content 

of Brass in export 

product 

C1174 Calcined Alumina 

C1175 Condensor/ Evaporator 

Coils used as Heat 

exchangers for 

Airconditioning and 

Refrigerator purpose. 

C1176 Copper & Copper Alloy 

(including Brasses, 

Bronzes, Cupro Nickel, 

Nickel Silver) Extruded 

and Drawn Hollow 

Sections such as Pipes & 

Tubes. 

1 MT 1 Caustic Soda lye (containing 

min. 47% Caustic Soda) 

2 Furnace oil 246 kgs 

3 Synthetic Flocculant 230 gms 

4 Crystal growth modifier 262 gms 

1 Kg 1 Copper tubes Refrigeration 

quality-Dia 1/4" to 1/2" 

2 Aluminium Fin Stock thickness 

0.10 mm to 0.20 mm 

174.47 kgs in lye 

form with 47% 

Caustic content (82 

kgs on 100% basis) 





3 Brazing materials Upto 0.5% of FOB 

value 

4 U Bends and Tripods Net to Net 

1 kg 1 Copper scrap 

OR 

1 Copper Cathode/Copper Wire 

Bars 

OR 

Copper Billets 

2 Alloying Elements viz. Zinc, 

Lead, Tin, Nickel, Aluminium 

etc. 

3 Calcium Hexa Bromide/Calcium 

Bromide 

4 Hot Die Steel 

5 Lubricants 

6 Tungsten Carbide Drawing Dies 

& Plugs 

7 Refractory Ramming Mass 









CIF value of the above mentioned item No. 3 to 7 is limited to 1.5% of FOB value of export. 

C1177 Copper & Copper 

Alloy(including Brasses, 

1 kg 1 Copper Scrap 

OR 

1.07 kg 

Bronzes, Cupro Nickel, 

Nickel Silver) Extruded 

Copper Cathodes/Copper Wire 

Bars 

1.05 kg 

and Drawn Solid Sections 

2 Alloying Element/s viz. Zinc, 

Lead, Tin, Nickel, Aluminium 

etc. 

1.05 kg 

3 Calcium Hexa Bromide / CIF value limited to 

Calcium Bromide 


of export. 

4 Hot Die Steel CIF value limited to 


of export.

C1178 Copper Based Prealloyed 

Powders to R- 

100/PMB-20/SY/ 

HF2/LS10/GS10/ SAE- 

797/G-46/KS940. 


Powders to R- 

250/PMB-21/SX/ H- 

24/KS-25/GS-25/ SAE- 

799 HF-16/ KS-23/GS- 

23/G-48/ KS941-1 


Powders to R- 

730/PMB-30/ SL/KS- 

5 Lubricants CIF value limited to 


of export. 

6 Tungsten Carbide Drawing Dies 

& Plugs 

C232 



of export. 

7 Refractory Ramming Mass CIF value limited to 


of export. 

100 kgs 1 Copper Wire 


83.527 kgs 

2 Lead 10.441 kgs 




77.377 kgs 

2 Lead 23.859 kgs 




74.541 kgs 

2 Lead 30.026 kgs 

30/GS-30/ SAE-48 3 Tin Ingots/Scraps 0.262 kgs 


Powders to R- 

770/R-780/ PMB- 

26/SP/H-24/ KS25/GS-25/ 

SAE-49/G-41 


Powders to SAE- 

484/PMB-42 



77.315 kgs 

2 Lead 25.069 kgs 




58.115 kgs 

2 Lead 43.979 kgs 


C1183 Copper Bonded 1 kg 1 MS Bright Bars 1.100 kg 

Grounding Rods 2 Copper Bar Cathodes 0.050 kg 

C1184 Copper extruded solid 

sections/Copper Rods 

C1185 Copper Flats/ Sheets/ 

Strips 

C1186 Copper Foils 

1 kg 1 Copper Cathode/ Ingot 

OR 

1.02 kg 

Copper Scrap 

1.08 Kg 

1 kg 1 Copper Wire Bar/ Copper 

Ingot/Copper Rod/Copper 

Cathode 

OR 

1.02 kg 

Copper Scrap 1.05 kg 

1 kg Copper Ingot/ Copper Cathode 

OR 

1.02 kg 

Copper Strip in Coil 

OR 

1.01 kg 


C1187 Copper sleeves 1 kg 1 Copper Scrap 1.050 kg 

C1188 Silver Bearing Copper 

Strip/ Sheets/ Foil 

1 kg. 1 Copper Scrap 

OR 


export 

Copper Wire Bar 1.03 kg/kg content in 

export

C1189 Copper Wire 

C1190 Extruded Aluminium 

Products including pipes 

and tubes 

C1191 Finished machined 

Bronze castings Alloy 

Aluminium Bronze BS 

1400-AB-1 (copper 

content 87% alum. 

content 10%, Iron 

content 3%) 

C1192 Finished machined 

Bronze castings Alloy 

Leaded Bronze BS 1400- 

AB2 (Coper content 80%, 

lead 10% and Tin 10%) 

C1193 Lead Antimony Wire 

4.5mm Dia (Sb 1.5% Pb 

98.5%) 

C1194 Lead Antimony wire 

6.45mm dia ( Sb 10.5% 

Pb 89.5%( 

C1195 Lead Ingots 99.97% 

Purity/Antimonial 

Lead(Lead Antimony 

Alloy)/ Calcium Lead 

Alloy (Lead Calcium 

Alloy) 

C1196 Nickel Silver Strip for 

Defence, Electronics and 

telecommunication 

purposes 

C1197 Nickel Silver Wire 

2 Silver Bullion of Purity 99.99% 1.02 kg/kg content in 

export 

1 kg 1 Copper rods 

OR 

C233 

Copper Ingots 

OR 

1.01 kg 

1.02 kg 


1 kg 1 Aluminium Scrap 1.06 kg 

1kg 1 Copper Scrap/ Copper Ingot 1.057 kg 

2 Aluminium 0.110 kg 

3 Iron 0.044 kg 

1 kg 1 Copper 0.880 kg 

2 Lead 0.110 kg 

3 Tin 0.146 kg 

1 kg 1 Lead 1.0343 kg 

2 Antimony 0.0158 kg 

1 kg 1 Lead 0.940 kg 

2 Antimony 0.1103 kg 

1 Kg 1 Lead Scrap namely ISRI Radio, 

Racks, Relay, Ropes & Roses 

1 Kg 1 Nickel Silver Scrap 

OR 

1 a) Copper Wire Bar/ Cathode/ 

Ingot/ Rod 

OR 

Copper Scrap 



1.090 Kg/kg content 




OR 



b) Zinc Ingot 1.064 kg/kg content 


c) Nickel Cathode 1.064 kg/kg content 


2 Zinc Ingots 1.05 Kg/kg content in 


3 Nickel Cathode 1.05 Kg/kg content in 


1 Kg 1 Copper Wire Bar/ 

Cathode/Ingot/Rod 

OR 

Copper Scrap 


in export 

OR 



2 Zinc Ingot 1.05 Kg/Kg content

C1198 Nickel Wire and /or 

Strip. 

C1199 Pen Part-Mouth piece 

made of Brass 

C234 

in export 

3 Nickel Cathode 1.05 Kg/Kg content 

in export 

1 MT 1 Nickel Cathode and/or Nickel 

Pellet 

1.03 MT 

1 Kg. 1 Brass Scrap 1.075 Kg 

C1200 Phosphor Bronze fabric 1 kg 1 Phosphor Bronze Wire Rod 1.050 kg 

C1201 Phosphor Bronze strips 

for tele-communication 

and electronics, including 

computer application 

C1202 Phosphor Bronze 

Wire(Tin Bronze Core 

Wire) 

C1203 Pressure Die Cast Article 

made of Zinc. 

1 Kg 1 Phosphor Bronze Scrap 

OR 

1 a) Copper Wire Bar/ Cathode/ 

Ingot/ Rod 

OR 

Copper Scrap 





OR 



b) Tin Ingot 1.064 kg/kg content 


2 Tin Ingot 1.05 Kg/Kg of tin 

content 

1 kg 1 Copper Wire 

Bar/Cathode/Ingot/Rod 

OR 


export 

OR 

Copper Scrap 



2 Tin Ingots 1.05 kg/kg content in 

export 

1 kg 1 Zinc Ingots 1.100 kg 

C1204 Pure Copper Powder 100 kgs 1 Copper 104.712 kgs 

C1205 Deleted 

C1206 Silver Cadmium Oxide 

Contact 

1 Kg 1 Silver Bullion Purity 99.9% 1.03 Kg/Kg content 

in export 

C1207 Silver Graphite contact 1 Kg 1 Silver Bullion Purity 99.9% 1.03 Kg/Kg content 

in export 

C1208 Silver Nickel Contacts 1 Kg 1 Silver Bullion Purity 99.9 % 1.03 kg/kg content in 

export 

2 Nickel 99.8% purity 1.05 kg/kg content in 

export 

C1209 Silver Tungsten Graphite 1 Kg 

Contact 

1 Silver Bullion Purity 99.9% 1.03 Kg/Kg content 

in export 

2 Tungsten Graphite Purity 99.95% 1.05 Kg/kg content in 

export 

C1210 Solder Bar (of Lead & 

Tin) 

1 MT 1 Lead 1.01 MT/MT content 

in export. 

2 Tin 1.01 MT/MT content 

in export. 

C1211 Thermit Mixture/Powder 1 kg 1 Aluminium Powder 205 gms. 

containing Iron Oxide, 

Aluminium Powder 

2 

3 

Iron Oxide 

Ferro Alloy 

614.3 gms. 

40.9 gms. 

C1212 Tin Ingots 1 kg 1 Tin Dross 

OR 

Tin Scrap 

4 Addition (name to be specified) 139.3 gms. 

1.15 kgs 

OR 

1.06kgs

C1213 Tin Metal of minimum 

99.5% Purity 

C1214 Valve Stamps made of 

Brass 

C1215 Asbestos Free Roll 

Linings 

C1216 Cast Alloy permanent 

magnets 

1 MT 1 Tin concentrate with Tin content 

of 55% to 65% 

C235 

800 kgs 

2 Tin Metal of purity 99.8% 300 kgs 

1 Kg. 1 Brass Scrap 1.20 kg/kg content of 

brass in the export 

product 

1 kg 1 Phenol Formal-dehyde Resin 0.167 kg 

2 Fibreglass Chopped Strands 0.222 kg 

3 Acrylonitrile Butadiene Rubber/ 

Nitrile ButileRubber 

0.333 kg 

1 kg 1 Cobalt 1.05 kg/Kg content in 

export. 

2 Nickel 1.05 kg/Kg content in 

export. 

3 Pure Iron 1.2 kg/kg content in 

export. 

4 Aluminium Ingot 1.10 kg/kg content in 

export. 

5 Copper 1.10 kg/kg content in 

export. 

C1217 Shifted to Chemical 

Group 


Group 

C1219 Shifted to Textiles Group 

C1220 Shifted to Electronic 

Group 


Group 

C1222 Hose Wire (Brass Plated) 1 Kg 1 Brass Plated Wire (Cold Drawn) 1.02 Kgs. 

C1223 Magnetic Assemblies 1 kg 1 Cobalt 0.26 kg 

Incorporating cast Alloy 

permanent magnets 

e.g.holders/ positions/ 

2 

3 

Nickel 

Pure Iron Powder 

0.15 kg 

0.55 kg 

floaters 4 Copper 0.033 kg 


Group 

C1225 Metal Graphite Block 1 kg 1 Copper Powder 0.791 kg 


3 Natural Graphite 0.196 kg 

4 Lead Powder 0.050 kg 

C1226 Spikes for use as Railway 1 kg. 

Track material 

1 MS Billets 1.21 kg 

Note:- In case the export product is galvanised, in addition to the above item, Zinc @4% of Net weight of 

Steel to be galvanised may be allowed. 

C1227 Steel backed lead based 100 Kgs 1 CR Steel 71.30 Kgs 




2 

3 

Lead 

Tin Ingots/Scraps 

34.49 Kgs 

2.68 Kgs 

equivalent Antimony Ingots/Scraps 4.13 Kgs

C1228 Steel backed lead based 




equivalent 

C1229 Tungsten Disc alongwith 

Rod End, Cutting Sludge, 

Burnishing Sludge, Scrap 

Disc 

100 Kgs 1 CR Steel 71.30 Kgs 

1.0 kg 

containing 

0.5 

kg.Tungeste 

n Disc.& 0.5 

kg. 

remaining 

items 

2 Lead 34.49 Kgs 

3 Tin Ingots/Scraps 0.14 Kgs 

4 Antimony Ingots/Scraps 5.99 Kgs 

5 Arsenic 0.41 Kgs 

1 Tungsten Rod 1.1 kg 

2 Alumina Oxide Abrasive Cutting 

Wheels - OD 180 mm, ID 12.7 

mm and Thickness 0.42 mm 

C1230 Head Pan 1 No 1 CRCA Sheet/Coil 0.7 mm - 1.0 

mm Thickness 

C1231 Multi Cylinder Fuel 

Injection Pumps for 

Diesel Engines 

1 No A. RAW MATERIAL: 

C236 

5 Nos. 



1 Free Cutting Steel 2.1314 kgs 

2 Ball Bearing Steel 1.8189 kgs 

3 Cold Heading and Cold 

Extruding Steel Wires 

1.0714 kgs 

4 Case Hardening Steel Flats 1.8182 kgs 

5 Profile Steel Bars 2.9762 kgs 

6 Extrusion & Cold Forging Steel 

Bars/Rods 

1.0094 kg 

7 Aluminium Alloy Ingot 1.2264 kg 

B. COMPONENTS: 

8 Gasket 12 Nos. 

9 Valve Holder 2 Nos. 

10 Ball 3 Nos. 

11 Screws, all types 34 Nos. 

12 Springs, all types 6 Nos. 

13 Shims 4 Nos. 

14 Washers, all types 20 Nos. 

15 Seal Rings/O Rings/Shaft Seal 

Rings/Spacer Rings 

13 Nos. 

16 Threaded Bushings 2 Nos. 

17 Closer Cap 1 No. 

18 Sliding Sleeve 1 No. 

19 Control Plunger 1 No. 

20 Needle Roller Bearing 1 No. 

21 Tappered Roller Bearings 2 Nos. 

22 Levers 4 Nos. 

23 Flyweight Castings 2 Nos. 

24 Shaft 1 No.

25 Link Fork 1 No. 

26 Locking Bolt 1 No. 

27 Housing/Stop Housings 1 No. 

28 Connecting Flange 3 Nos. 

29 Valve Plates 4 Nos. 

30 Spring Retainer 1 No. 

31 Sealing Nut 1 No. 

32 Pulling Electro Magnet 1 No. 

33 Feed Pump 1 No. 

34 Guide Bushing 1 No. 

35 LDA/Manifold Pressure 

compensator 

C237 

1 No. 

36 Template 1 No. 

37 Roller Tappet Body 4 Nos. 

38 Stop Bracket 1 No. 

39 Lever Shaft 1 No. 

40 Bearing Shell 1 No. 

41 Curve Template 1 No. 

42 Link 1 No. 

43 Screw Plug 2 Nos. 

44 Strap 2 Nos. 

C. Misc. items: 

45 Calibration Fluid (Test Oil) for 

Diesel Injection Pump, 

CBN/Diamond Honing Stick 

Blanks/Support Stone/Deburring 

Tools, 

Hone Holders, 

Plain Grinding Wheels/Disc 

Wheels for Lap/ Match Grinding/ 

CBN Wheels, 

Carbide End Mills/ Tools, 

Gear Shaper, 

Diamond Dresser, 

Deep Hole Drills, 

Reamers, 

Oil Stones, 

Broaches, 

Drills, 

Rack Milling Cutters, 

Machine Taps, 

Filter Paper/ Media and 

Super Finishing Stones 

C1232 Taper Roller Bearings 1000 Nos 1 Forged/Turned Inner Ring 

(Cone) in unfinished condition 



1100 Nos.

upto and including 400 

gms per bearing weight 

2 Forged/Turned Outer Ring (Cup) 

in unfinished condition 

C238 

1100 Nos. 

3 Finished Cages (Retainer) 1010 Nos. 

4 Finished Rollers 

OR 

Cold Drawn Wire 

OR 

17000 Nos. 

110 kgs 

Wire Rod 115 kgs 

5 Misc. items: Grinding Wheels, 

Honing Stones, Diamond 

Drenning Rollers, Rust 

preventing Oils, Honing Oil & 

Anti Corrosion Lubricant 

Up to 5% of FOB 


For the export of assembled cones upto and including 300 gms, the items at S.No. 1,3,4 & 5 only shall be 

allowed. 

C1233 Taper Roller Bearings 

above 400 gms per 

bearing but upto and 

including 800 gms per 

bearing weight 

1000 Nos 1 Forged/Turned Inner Ring 


1100 Nos. 

2 Forged/Turned Outer Ring (Cup) 1100 Nos. 




OR 

17170 Nos. 


OR 

285 kgs 





Preventing Oils, Honing Oil & 




For the export of assembled cones above 300 gms and upto and including 600gms, the items at S.No. 1,3,4 

& 5 only shall be allowed. 








1100 Nos. 





OR 

18580 Nos. 


OR 

357 kgs 


















1100 Nos. 




4 Finished Rollers 18380 Nos.

C239 

OR 


OR 

574 kgs 











C1236 Taper Roller Bearing 





1000 Nos. 1 Forged/Turned Inner Ring 


1100 Nos. 





OR 

17170 Nos. 


OR 

629 kgs 









For the export of assembled cones above 1200 gms and upto & including 1500gms, the items at S.No. 1,3,4 









1100 Nos. 





OR 

20100 Nos. 


OR 

792 kgs 









For the export of assembled cones above 1500 gms and upto & including 1800gms, the items at S.No. 1,3,4 







1100 Nos. 





OR 

16160 Nos. 


OR 

1300 kgs 

Wire Rod 1365 kgs





Anti Corrosion 

LubricantLubricant 

C240 



Note: In respect of Sl.No.C1232 to C1238, material of construction for items of imports appearing at 

Sl.Nos.1, 2 & 4 in each weight range shall be bearing quality alloy steel to grades SAE 52100/8620H/20 Hi- 

MC/8219 R or equivalent.For the export of assembled cones above 1800 gms, the items at S.No. 1,3,4 & 5 

only shall be allowed. 

C1239 Indexable Tool Holder 1 No 1 Clamping Elements Net to net. 

2 Toggle Levers Net to net. 

C1240 Oxide Bonded Silicon 

Carbide Refractory 

C1241 TT Cam 

C1242 Shuttle Race Complete 

C1243 Clamp Stop Motion 

C1244 Crank 

C1245 Needle Clamp 

C1246 Feed Regulator 

C1247 Feed Fork 

3 Clamping Screws Net to net. 

4 Driver for screws (Torx keys) Net to net. 

5 Shim Pins Net to net. 

6 Tungsten Carbide Shims Net to net. 

7 Tungsten Carbide Inserts 

(Consumable) 

1000 kgs. 1 Silicon Carbide Crude 

OR 

Silicon Carbide Grains (Silicon 

Carbide percentage less than 

95%) 

2 Micro Silica 75 kgs 



1225 kgs 

OR 

985 kgs 

3 Calcium Lignosulphonate 

(Lithopix) 

40 kgs 

1 kg 1 Pig Iron/Scrap 1.00 kg 

2 Steel Scrap 0.20 kgs 


2 Steel Scrap 0.20 kg 



1 kg 1 Steel Scrap 0.20 kg 

2 Pig Iron/Scrap 1.00 kg 







C1248 Feed Driven Rock Shaft 1 kg 1 Pig Iron/Scrap 1.00 kg 

Crank 2 Steel Scrap 0.20 kg 

C1249 Feed Lifting Rock Shaft 



C1250 Shuttle Race Ring 1 kg 1 CRCA Sheet 2.00 kg 

C1251 Shuttle Driven 1 kg 1 CRCA Sheet 2.00 kg 

C1252 Face Plate Complete 1 kg 1 CRCA Sheet 1.30 kg 

C1253 Slide Plate 1 kg 1 CRCA Sheet 1.07 kg

C1254 Tension for Plate 1 kg 1 CRCA Sheet 1.00 kg 

C1255 Bobbincase 

1 kg 1 CRCA Sheet 0.6 kg 

2 MS Alloy Steel Bar/Rod 3.0 kgs 

C1256 Bobin Winder Complete 1 kg 1 CRCA Sheet 1.5 kg 

C1257 Lifter 1 kg 1 CRCA Sheet 1.33 kg 

C1258 Thread Take Off Lever 1 kg 1 CRCA Sheet 2.00 kg 

C1259 Roller for Regulator 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.5 kg 

C1260 Pressure Bar Thumb 

Screw 

1 kg 1 MS/Alloy Steel/ Bars/Rods 1.25 kg 

C1261 Pressure Foot 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.40 kg 

C1262 Feed Cam 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.40 kg 

C1263 Needle Bar Bushing 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.6 kg 

C1264 Link Body 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.6 kg 

C1265 Stud 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.15 kg 

C1266 Arm Shaft 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.20 kg 

C1267 Head Hinges 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.20 kg 

C1268 Pitman with Rod 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.20 kg 

C1269 Stand Fitting 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.20 kg 

C1270 Pitman Crank with 

Fittings 

C1271 Single piece forged and 

machined shuttle hook. 

C1272 Centre Small Screw with 

Nuts 


1 kg 1 Mild Steel/Alloy Steel/ 

Bars/Rods of relevant grades. 

C241 

6 kg 


C1273 Needle Plate 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.40 kg 

C1274 Pressure Bar 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.20 kg 

C1275 Screw & Nut for Feed 

Fork 


C1276 Needle Bar 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.20 kg 

C1277 Screw & Nut for CC Rod 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.25 kg 

C1278 Shuttle Race Top Spring 1 kg 1 MS/Alloy Steel/ Bars/Rods 2.00 kg 

C1279 O/S Rock Shaft 1 kg 1 MS/Alloy Steel/ Bars/Rods 1.1 kg 

C1280 Ball Bearing upto and 

including 50 gms/Bearing 

C1281 Ball Bearing above 50 

gms but upto 100 

gms/Bearing 

1000 Nos 1 Steel Wire/Bar/ Rod 22 kgs 

2 Seamless Steel Tubes 30 kgs 

3 Steel Balls 8250 Nos. 

4 Cages (Retainer) 1050 Pairs 

5 Metal Shield Plates/Rubber Seals 

(with backing Steel Sheet) 

2100 Nos. 

1000 Nos 1 Steel Wire/Bar/ Rod 50 kgs 

2 Seamless Steel Tubes 65 kgs 



5 Metal Shield Plates/Rubber Seals 


2100 Nos.



gms/Bearing 



gms/Bearing 



gms/Bearing 


gms/Bearing 

1000 Nos 1 Seamless Steel Tubes 230 kgs 



4 Metal shield Plates/Rubber Seals 


2100 Nos. 

1000 nos 1 Seamless Steel Tubes 570 kgs 



4 Metal Shield Plates/Rubber Seals 2100 Nos. 


1000 nos 1 Seamless Steel Tubes 980 kgs 





1000 nos 1 Inner Race of Bearing (in Ring 

form) 

1050 Nos. 

2 Outer Race of Bearing (in Ring 

form) 

1050 Nos. 





Note: 1 In respect of norms covered by Sl.No.C1280 to C1285, materialof construction for Inner/Outer 

Race, Seamless Steel Tubes, Steel Wire/Bar/Rod and Steel Balls should be bearing grade steel to 

specification SAE 52100 or equivalent.2. In addition to the inputs specified against the norms at S.No.C 

1280 to C-1285, import of miscellaneous items namely Grease, Grinding Wheels, Honing Stones, Polishing 

Compound, Diamond Drilling Roller, Rust Preventing Oil and Chemicals shall bepermitted for a total CIF 

value restricted to 5% of the FOB value.3) Import of Shield should be allowed only in respect of Bearing 

fitted with Shield.4) Wherever there is export of Ball Bearing with Housing, after ascertaining the weight 

of the Ball Bearing, the import of input may be allowed applying relevant SION at C-1280 to C-1285. 

C1286 Diesel Engine 1 No 1 Piston Assembly Set Net to net. 

C1287 Taper Rollers for 

Bearings 

C1288 Ball Valve 


Arc Welded Pipes with 3 

Layer Polyethylene 

coating of 2 mm thickness 

and having coating 

weight of 2.75 kgs +/- 5% 

per Sq.Mtr. 

1 kg 1 Steel Wire Rods/ Wire Coils of 

100 CR6 (SAE-E-52100) 

2 Grinding Wheels and Die/Steel 

Tool 

C242 





1 No 1 Steel Balls Net to net. 

2 Disc Spring Net to net. 

3 Hex Hd Bolt Net to net. 

4 Hex Full Nut Net to net. 

5 Int. Lock Washer Net to net. 



2 Welding Wire 4.13 kgs 

3 Epoxy Powder 0.119 kg/ Sq.Mtr. of 

Pipe. 

4 Adhesive 0.261 kg/ Sq.Mtr. of 

Pipe. 

5 Polyethylene 2.53 kg/ Sq.Mtr. of 

Pipe.

6 Misc. items: Welding Flux, Up to 6% of FOB 

Grinding Wheel, CO2 Wire, Rust value of exports. 

Preventing Oil, X-Ray Film, 

Steel Shots, Steel Grits, Brush for 

cut back, Taper, Support 

Wheel,Prep. tape, Prep. 

Filler,Heat Shrink Sleeve, Epoxy 

Promer Kit, Melt Stick and 

Lubricating Oil. 

Note: 1 An additional item X-Ray Tube will be allowed for order of pipes above 25,000 MT. 




coating of 2.5 mm 

thickness and having 

coating weight of 3. 15 

kgs +/- 5% per Sq.Mtr. 





Pipe. 


Pipe. 


Pipe. 

6 Misc. items: Welding Flux, Up to 6% of FOB 

Grinding Wheel, CO2 Wire, Rust value of export. 



cut back, Taper, Support Wheel, 

Prep. Tape, Prep. Filler, Heat 

Shrink Sleeve, Epoxy Promer 

Kit, Melt Stick and Lubricating 

Oil. 





coating of 3 mm thickness 

and having coating 

weight of 3.60 kgs +/- 5% 

per Sq.Mtr. 





Pipe. 


Pipe. 


Pipe. 

6 Misc. items: Welding Flux, 

Grinding Wheel, CO2 Wire, Rust 



cut back, Taper, Support 

Wheel,Prep. Tape, Prep. 

Filler,Heat Shrink sleeve, Epoxy 

Promer Kit, Melt Stick and 

Lubricating Oil. 





coating of 3.5 mm 

thickness and having 

coating weight of 4.20 kgs 

+/- 5% per Sq.Mtr. 

C243 

The CIF value of all 

these items taken 

together is restricted 


value 





Pipe. 


Pipe. 


Pipe. 

6 Misc. items: Welding Flux, The CIF value of all

C244 

Grinding Wheel, CO2 Wire, Rust 



cut back, Taper, Support Wheel, 

Prep. Tape, Prep. Filler, Heat 

Shrink Sleeve, Epoxy Promer 

Kit, Melt Stick and Lubricating 

Oil. 


C1293 Double Fibre Glass 

Covered/Insulated 

Round/Rectangular 

Copper Wire Strip 

C1294 Filter Packs made of 

Stainless Steel Wire Mesh 

(Fitted in Aluminium 

Rings) 

C1295 Horizontal Split Case 

Single Stage Double 

Suction Pump 

these items taken 

together is restricted 


value 

1 kg 1 Copper Wire Bar/ Wire Rod 1.01 kg/kg content in 


2 Glass Fibre Yarn 1.03 kg/kg content in 


1 kg 1 Stainless Steel Wire Mesh 1.20 kg/kg content in 


1 No 1 Mechanical Seal Net to net. 

2 Single Row Deep Groove Ball 

Bearing 

Net to net. 

3 CDA-975 Ingot (Silicon Bronze) 1.05 kg/kg weight of 

finished Impeller. 

C1296 Zinc Anode 1 kg 1 Special High Grade Zinc 1.03 kg/kg content in 


C1297 Alluminium Anode 1 kg 1 Aluminium Ingots 1.05 kg/kg content in 





Group 

C1299 Band Saw 

Segments/Band Saw in 

Coil made from Carbon 

Steel/Bimetal Steel 

1 kg 1 Relevant CR Steel/Bimetal steel 

Strip/Wide Coil 

1.20 kg 

2 Gang Milling Cutter 1 Gang/ 1474 kgs of 

export. 

Note: 1 The total CIF value of item 2 shall not exceed 5% of FOB value of exports. 

C1300 Domestic Sewing 

Machine with standard 

accessories/ Embroidery 

Sewing 

Machine/Industrial 

Sewing Machine/ 

Overlock Sewing 

Machine with or without 

cover 

C1301 Portable Bag Closure 

Machine 

C1302 L.V. Distribution Pillar 

1 No 1 Alloy Steel Bar/ Rod 1.3 kg/kg content in 

export. 

2 CRCA Sheet/Coil/ Seconds 1.2 kg/kg content in 

export. 

3 Pig Iron/CI Scrap/ Steel Scrap 1.2 kg/kg content in 

export. 

1 No 1 Alloy Steel Bar/ Rod 1.3 kg/kg content in 

export. 

2 CRCA Sheet/Coil/ Seconds 1.2 kg/kg content in 

export. 


export. 

1 No 1 GP Sheets/Coils 

OR 

CRCA Mild steel sheets/coils 

(including Secondary & 

1.05 Kg/kg content of 

steel items in export 

product. 


steel items in export

C1303 L.V. Distribution Cabinet 

C1304 Switch Fuse Unit 

C1305 Bolt, Nut, Sleeve for 

Wheel Assembly 

C1306 Flange Type Rear Axle 

Shaft 

C245 

Defective) 

OR 

Aluminium Sheet 

OR 

Aluminium Alloy Ingot (CG 

grade/ EC grade) 

2 Copper Wire Bars/Copper Strips 

(Electrolytic/ETP Grade) 

product. 


Aluminium items in 


1.01 kg 


Copper items in 


3 Brass Scrap 1.05 kg/kg content of 

Brass items in export 

product. 

4 Electrical Component Net to net 

1 No 1 Glass Reinforced Plastic 

enclosures 



Net to net. 





Brass items in export 

1 No 1 CRCA Mild Steel Sheets/Coils 

(including Secondary & 

Defective) 

OR 

GP Sheets/Coils (including 

Secondary & Defective) 



1 kg 1 Alloy/Non-Alloy Steel Bars/ 


1 kg 1 Alloy/Non-Alloy Steel Bars/ 


C1307 Treaded Adopter 1 kg 1 Alloy/Non-Alloy Steel Bars/ 


C1308 Wheel Wrench 1 kg 1 Alloy/Non-Alloy Steel Bars/ 


C1309 Round/rectangular High 

Beam Head Lamp 

1 No 1 Relevant Diffusion Lens 1 No. 

C1310 Round/Rectangular Fog 

Lamp 

C1311 Round/Rectangular 

Work Lamp 

C1312 Electrical Cutout 



1 No 1 CRCA Sheets/Coils 

OR 

GP Sheets/Coils 

OR 

Aluminium Sheet 

OR 

Relevant Glass Reinforced 

Plastic Enclosures 









in export. 


in export. 


in export. 


in export. 


steel items in the 

export 


steel items in the 

export 


Aluminium item in 


Net to net

C1313 Drill Collars Magnetic or 

Non Magnetic Slic or 

Spiral 

C1314 Silver Brazing Alloy in 

the form of Strips/ Wire/ 

Powder/ Foil/ Blanks/ 

Discs/ Profile/ Sheet/ Rod 

as per ASTM/ JIS/ DIN/ 

BIS/IBS standard or 

equivalent 

C1315 Electroformed Nickel 

Micro Screen 

C1316 Tungsten Wire(Black) 

C1317 Tungsten Wire (Clean) 

C1318 Precious Metals 

Spinnerettes containing 

Gold 49.5%, Platinum 

49.5% & Rhodium 1% 

2 Copper Wire Bars/ Copper Strips 1.01 kg/kg content of 

Copper items in the 



Brass items in the 


100 No 1 Relevant Hollow Drill Collar 

Bar, Tube, Magnetic or Non 

Magnetic of relevant dia 

102 Nos. 

1 kg 1 Silver Bullion (Minimum Purity 

99%) 

C246 



2 Copper(Minimum Purity 99%) 1.05 kg/kg content in 

the export Product. 

3 Zinc (Minimum Purity 99%) 1.05 kg/kg content in 


4 Cadmium(Minimum Purity 99%) 1.05 kg/kg content in 


5 Nickel(Minimum Purity 99%) 1.05 kg/kg content in 


6 Tin (Minimum Purity 99%) 1.05 kg/kg content in 


1 No 1 Inco `s' Nickel Round/ Pellets 

Unwrought and Unalloyed 

1 kg 1 Tungsten Wire above 0.9 mm 1.08 kg 

2 Colloidal Graphite with solid 


0.10 kg 

1 kg 1 Tungsten Wire above 0.9 mm 1.12 kg 

2 Colloidal Graphite with solid 


0.10 kg 

1 kg 1 Gold 0.515 kg 

2 Platinum 0.515 kg 

3 Rhodium 

OR 

Scrap Spinnerettes/ Eyes/ 

Thimbles of relevant grade. 


export. 

0.010 kg 


each precious metal 


Note: In case of any change in the specification of the export product, the requirement may be worked out 

by allowing 4% wastage on net content of each item in the export product. 

C1319 Containers made of 1 MT 1 Boiler Quality Plates 1.075 MT 

Boiler Quality Plate for 

Chlorine 

2 

3 

Welding Wire 

Welding Flux 

9 kgs 

11 kgs 

Note: The cummulative value of items 2 & 3 shall not exceed 5% of FOB value of exports. 

C1320 Integrated Wiring 1 No 1 Body Clips/Cable Ties Net to net. 

Harness 

2 Cable Channels Net to net. 

3 Cavity Plugs Net to net. 

4 Connector Covers Net to net. 

5 Connectors Net + 2% wastage. 

6 Conv. Conduits Net to net. 


8 End Fittings Net to net.

C1321 Instrument Cooling Fan 

Sleeve Bearing Type or 

Ball Bearing Type 110V 

AC/ 115V AC/ 220V 

AC/230V AC/24V AC 

9 Fuseboxes Net to net. 

10 Fuses Net to net. 

11 Grommets Net + 3% wastage. 

12 Moulded Connector Assemblies Net to net. 

13 Octane Rating (Resistor) Net to net. 

14 PVC Coated Copper Wires Net to net. 

15 PVC Tapes Net + 2% wastage. 

16 PVC Tubes or Nylon Knitted 

Texture Tube 

C247 

Net to net. 

17 Ring Out Labels Net to net. 

18 Seals Net to net. 

19 Sec. Locks Net to net. 

20 Shrink Tubes Net to net. 

21 Sleeves Net to net. 

22 Splice Clips Net to net. 

23 Terminals Net to net. 

24 Tesa Bands Net to net. 

25 Textile Tapes (Relevant width 

and length) 


26 Silicon Spray Net to net. 

27 Terrostat Net to net. 

1 No 1 Aluminium Ingot/ Aluminium 

Scrap 

OR 


the export 

Aluminium Housing Net to net. 

2 Cold Rolled Non-Grain Oriented 

(CRNGO) Electrical Steel Sheet 

OR 



Stator & Laminations of Rotor Net to net. 

3 Self Solderable Enamelled 

Copper Wire 

OR 

Self Bonding Copper Wire or CC 

Copper Rod (Electrolytic Grade) 

4 Polybutlyne Therpetlate/ Nylon 

66/ Polycarbonate 







5 Expandable Polystrene 1.05 kg/kg content in 


6 Copper Wire/Strip 1.01 kg/kg content in 


7 Label Paper 1.05 kg/kg content in 


8 Components: 

a) Housing Clip 

b) Lock Washer (Circlip) 

c) Insulation Sleeve 

d) Brass Insert 

e) Shaft

C1322 Double Fibre Glass 

Covered/Insulated 

Round/Rectangular 

Copper Wire/Strip 

C1323 Enamelled Rectangular 

Copper Wire/ Strip 

C1324 Polymide Imide 

Enameled Glass Fibre 

Yarn covered Copper 

Conductor. 

C1325 Kapton Polyamide Film 

Insulated/ Covered 

Copper Wire/Strip 

C1326 Protective Apron for X- 

Ray having 

0.25mm/0.35mm/ 0.50mm 

Lead equivalent thickness 

C248 

f) Screw with Washer Net to net. 

g) Terminals 

h) Finger Guard 

i) Polyslider Washer 

j) Teflon Washer 

k) O-Ring 

l) Sintered Bush 

m) Interlock 

n) Spring 

o) Ball Bearing 

p) Brass Washer 

q) Hook up wire 

9 Misc. items: 

Epoxy Paint, 

Epoxy Bond, Upto 2% of 

Lubricating Oil, FOB value 

Cynoacrylic Adhesive, of export. 

Varnish or Electrical Insulating 

Enamel and 

Insulation Tape 

10 Impellor 1 Pc. 

11 Thermistor 1 Pc. 

1 kg 1 Copper Wire Bar/ Wire 

Rod/Cathode 






Rod/Cathode 



1 kg 1 Copper Wire Rod/Cathode 1.01 kg/kg content in 




3 Polyamide imide enamel. 1.01Kg/Kg content in 



Rod/Cathode 



2 Kapton Polyamide Film 1.015 kg/kg content 


3 Polyester Glass yarn 1.01Kg/Kg content in 


1 No 1 X-Ray Protective Sheeting of 

Lead having 0.125mm/ 0.175mm 

Lead equivalent thickness 

1.05 Sq.Mtr/ Sq.Mtr 


Note: The export product is normally Two/Three fold of the thickness of Lead Equivalent Sheet imported. 

The quantity may accordingly be worked out. For example, in case the thickness of sheet of Lead 

Equivalent exported is 0.35mm and the thickness of shet imported is 0.17mm, the quantity of import to be 

allowed is 1.05x2=2.10 Sq.Mtr/Sq.Mtr of Sheet exported. Requirement for other thickness may be worked

out in similar way. 

C1327 Auto Transformers 

(Variable Voltage)(a) 

upto 30 KVA I phase or 

90 KVA 3 phase 

C1328 Textile Machinery 

Continuous Open width 

Chainless Mercerising 

Machine 

1 No 1 CRGO steel Laminations/ Sheets/ 

Coil/ Slits/ Cuts 

2 Copper winding wires/ Strips/ 

Wire bars/ Wire Rods/ Cathodes 

3 Carbon in brushes/ Blocks/ 

Rollers 

C249 

2.64 kg per KVA 


5.0 Cub. Cm. per 

KVA 

4 Brush Holder assembly Net to net 

5 Servo Motor Magnets for Motors Net to Net 

1 No 1 Stainless Steel Sheet/Coil SS304/ 

316 Quality 1.25mm to 4mm 

2 Stainless Steel Rounds/Bars 

10mm to 50mm 

3 Stainless Steel Pipes 1.25mm to 

3.15mm 







4 Mild Steel Plate 6mm to 16mm 1.05 kg/kg content in 


5 Mild Steel Rounds/ Bars 25mm 

to 140mm 



6 Mild Steel Channel 100x50mm Net to net. 

7 Seamless Tubes 215 to 450 O.D. 1.05 kg/kg content in 


8 C.I. Castings 1.02 kg/kg content in 


9 Tapered Roller Bearings Net to net. 

C1329 Cultivator (Shear) 1 kg 1 Profile Steel Bar 1.05 kg/Kg content in 

export. 

C1330 Brass Lamp Caps 1 kg 1 Brass Scrap 1.10 kg/kg content in 

export. 

C1331 Knives & Cutting Blades 

for Machine or for 

mechanical appliances 

(Centre Blade and Peanut 

Blade size 46-1/4" and 

42" length) 

1 kg 1 Alloy Steel Flat Bars 1.25 kg/kg content in 


C1332 Spheroidal Graphite 

quality Rolls for Rolling 

Mills - Fe-88.7%, C- 

3.5%, Si-2.0%, Mn-1.0%, 

Ni-3.8%, Cr-0.5%, Mo- 

1.0%, S- 

0.016%(Maximum) & P- 

0.15%(Maximum) 

1 MT 1 M.S. Scrap 1512.72 kgs 

2 Ferro Silicon (Si - 70-75%) 51.82 kgs 

3 Ferro Manganese (Mn - 50-62%) 32.91 kgs 

4 Nickel 69.09 kgs 

5 Ferro Chrome (Cr - 60-70%) 17.87 kgs 

6 Ferro Molybdenum (Mo-60- 

70%) 

30.18 kgs 

7 Furnace Oil 500 Ltrs. 

8 Bantanite Green Bond (Prepared 

Binders) 

12.00 kgs 

9 Nickel Magnesium (Ni - 78-82%, 22.10 kgs 

Mg - 16-18% and MM - 0.7- 

1.2%) 

10 Ferro Silicon Magnesium (Si - 

50-60%, Mg - 8-10% and Fe - 

Balance) 

22.10 kgs 

11 Graphite Electrodes 9.50 kgs

C1333 Steel Quality Rolls for 

Rolling Mills - Fe-93.8%, 

C-1.8%, Si-1.0%, Mn- 

1.0%, Ni-0.6%, Cr-1.4%, 

Mo-0.4%, S- 

0.04%(Maximum) & P- 

0.04%(Maximum) 

C1334 Alloy IC Quality Rolls for 


C-3.3%, Si-1.6%, Mn- 

1.2%, Ni-2.4%, Cr-1.1%, 

Mo-0.5%, S- 

0.1%(Maximum) & P- 

0.3%(Maximum) 

C1335 ICDP Qualaity Rolls for 

Rolling Mills containing 

Shell - Fe-88.7%, C- 

3.5%, Si-2.0%, Mn-1.0%, 

12 Ramming Mass 20.00 kgs 

13 Melted Flux 5.00 kgs. 

14 Calcium Silicide 1.11 kg 

15 Flourspar (Flux) 66.31 kgs 

16 Porous Plug (Laddle) 0.20 No. 

17 CBN Tips 5.93 Nos. 






6 Ferro Molybdenum (Mo-60- 

70%) 

7 Furnance Oil 

C250 

12.13 kgs. 

500 Ltrs. 

7 

OR 

HSD 470 Ltrs. 

8 Bantonite Green Bond (Prepared 

Binders) 

12.50 kgs 

9 Flourspar 80.67 kgs 


11 Graphite Electrodes 9.50 kgs 

12 Porous Plug 0.20 No. 


14 Melted Flux 12.50 kgs 


16 Ferro Aluminium 1.15 kgs 






6 Ferro Molybdenum (Mo - 60- 

70%) 

15.15 kgs 

7 Furnance Oil 500 Ltrs. 




11 Porous Plug 0.20 No. 






4 Nickel 54.83 kgs

Ni-3.8%, Cr-0.5%, Mo- 

1.0%, S-0.016% & P- 

0.15% & Core - Fe- 

93.4%, C-3.5%, Si-2.0%, 

Mn-0.5%, Ni-0.4%, Cr- 

0.2%, Mo-Nil, S-0.08% & 

P-0.1%. 

C1336 Hi-Crome Quality Rolls 

for Rolling Mills 

containing Shell-Fe- 

73.8%,C-3.0%,Si- 

1.0%,Mn-1.2%,Ni- 

1.5%,Cr-18%,Mo- 

1.5%,S-0.02% & P- 

0.06% & P- 

0.06%(Maximum) & 

Core-Fe-92.6%, C-3.2%, 

Si-2.0%, Mn-0.5%, Ni- 

1.3%, Cr-0.4%, Mo-Nil, 

S-0.02% & P-0.06%. 

C1337 NM(H) Quality Rolls for 


C-3.7%, Si-0.5%, Mn- 

0.4%, Ni-2.5%, Cr-0.6%, 

Mo-0.2% 



70%) 

C251 

7.58 kgs 



Binders) 

12.50 kgs 












70%) 

28.41 kgs 



Binders) 

13.46 kgs 

9 Nickel Magnesium (Ni - 78.82%, 14.02 kgs 

Mg - 16.18% and MM - 0.7- 

1.2%) 











70%) 

6.05 kgs 


8 Ferro Phosphorous 426.40 kgs 


10 Ferro Sulphur 59.21 kgs 



C1338 Cold Formed Metal 

Section 

1 kg 1 Cold Rolled Coil 1.02 kg 

C1339 Brass Cup 1 kg 1 Brass Strip Annealed 1.05 kg/kg content in 


C1340 Auto Gate Latch, Ring 1 kg 1 CRCA Sheet 1.05 kg/kg content in 

the export product.

Gate Latch, Ring Handle 

& Hand Rail Bracket 

C1341 Deleted 

C1342 Automatic Voltage 

Stabilisers/Servo Control 

Voltage Stabilisers (upto 

5 KVA Capacity) 

C1343 Typewriter(Manual) with 

ABS Casing. 

C1344 Tin Anode/ Bar/ Slab/ Pig 

(99.85% Purity) 

C1345 Stabilizers 110/220 V 

2 M.S. Rod 1.05 kg/kg content in 


1 kg 1 CRCA Sheet 1.05 kg/kg content in 


2 CRGO Silicon Steel Sheet 1.05 kg/kg content in 


3 Super Enamelled Copper Wire/ 

Electrolytic Copper Wire Rod 

C252 



4 Carbon Brush Blocks 1.10 kg/kg content in 


5 Light Emitting Diodes Net to net. 

6 Transistors Net to net. 


8 Capacitors Net to net. 

9 Resistors Net to net. 

1000 Nos 1 Cold Rolled Mild Steel 

Strips/Coils/Sheets. 

574Kgs. 

2 Manganese Chrome Steel Strips 702 kgs 

3 Spring Steel Strips 150 kgs 

4 Mild Steel Bars/ Wire 920 kgs 

5 Stainless Steel Sheet 160 kgs 

6 Aluminium Alloy (EM-6, LM- 

24) 

4700 kgs 

7 Zinc Ingot 500 kgs 

8 ABS Granules 1.05 kg/kg content in 


9 Type Sets Net + 1% wastage. 

2 ABS Granules 1250Kgs. 

3 Aluminium Alloy Ingots. 4700Kgs. 

4 Steel Wires (Tempered and 

Hardended/Profiles) 

139Kgs. 

5 Steel Rollers 8000Nos. 

6 Steel Type Sets. 45000Nos. 

1 MT 1 Tin Ingot 1.01 MT 

1 No. 1 Transistor 148 

2 Transistor 187 

3 Diode - 4007 

4 Capacitors 100/25 V Net to net 

5 Light Emittig Diode 6mm 

6 BWG 22x8 inch x 4 inch 13A 

Ceramic Fuse 

7 Super Enamelled Copper Wire 

30/33/38 SWG 

8 Cold Rolled Cold Anealled (Mild 

Steel) 

C1346 Zinc Builders Hardware - 1 kg 1 Zn-Al Alloy (94%, 4% by 

wt.resp.) Ingot or scrap 

110 gms 

425 gms 


the export product

Pressure Die Cast 2 Clad Concentrate/Solvent 

Replenisher/Emulsion etc. 


Group 

C1348 Auto Parts Double Brake 

Chamber Type 24 L/S 

C1349 Auto Parts Brake 









Chamber Type 30 S/S 

C1354 Surgical Suture Needles 

(Eye Type, French Spring 

Eye Type & Atraumatic 

Type Needles) upto 250 

mm Length. 

C1355 Auto Cables of various 

size 

C253 



1 No. 1 CRCA sheets/Coils 1.34 kg/kg content in 


2 Diaphragm Net to net 

1 No. 1 CRCA sheets/Coils 1.40 kg/kg content in 


2 Diaphragms Net to net 

1 No. 1 CRCA Sheets/coils 1.40 kg/kg content in 



1 No. 1 CRCA Sheets/Coils 1.39 kg/kg content in 



1 No. 1 CRCA sheets/coils 1.37 kg/kg content in 



1 No. 1 CRCA Sheets/Coils 1.40 kg/kg content in 



1 kg 1 Stainless Steel Wire of grade 

AISI-302/304/420/455 or its 

equivalent 

1.25 kg 

1 kg 1 Copper 1.01 kg/kg content in 


2 PVC Compound 1.03 kg/kg content of 

PVC Compound in 


C1356 Deleted 

C1357 Deleted 1 No. 

C1358 Split Airconditioner 1 No. 

12000 BTU consisting of 

1 condenser 1 Evaporator 

1 Compressor Hermatically Sealed 

compressors/Reciprocating 

Type/Rotary Type/Scroll Type 

Suitable for Electrical supply of 

110V or 120V or supply of 200V 

or 240V +/- 10% Tolerance limit 

and of 50 or 60 cycles capacity 

range:12000BTU +/- 10% 

Tolerance limit 

Net to net 

2 Bearing Assembly 

3 Air Filter 

4 Propeller(Fan) Condenser Fan 

5 Capacitors (36 MFD. 440V) 

6 Copper Tube Plan or Grooved 

7.0mm O.D. to 9.52MM O.D. 

7 Steel Sheets(GP and CRCA) 

Steel Sheet- GP-CRCA(0.6 mm 

to 2.0 mm +/- 8% thickness 

variation 




export product

C1359 Single phase 

Transformers(copper 

Wound)/Active Parts of 

Single phase 

transformers, above 25 

KVA, up to and including 

100 KVA 

1 No. 1 CRGO Silicon Electrical steel 

Sheets/ Coils 

OR 

3.667 kgs/KVA 

Transformer Core Alloy 

Amorphous Electrical steel 

4.584 kgs/KVA 

2 Copper Wire 

Bars//Rods/Cathodes 

2.412 kgs/KVA 

3 Transformer Oil base stock 2.379 kgs/KVA 

4 Electrical Insulation materials - 

kraft paper 

0.612 kgs/KVA 

5 Press Boards 0.140 kgs/KVA 

6 Powder coating paint 0.034 kg/KVA 

7 CRCA Sheets 0.704 kg/KVA 

Note: 1. CRCA Sheet to be allowed in case of complete Transformers only and not for its Active Parts 

C1360 Antimonial Lead 

Alloy/Calcium Lead 

Alloy(Ingots) (purity 

99.97%) (calcium content 

0.01 % to 0.02 % in the 

Calcium Lead Alloy) 

1 kg 1 Crude Antimonial Lead(Purity 

90%) 

1.10 kg 


Transformers (Copper 

Wound)/Active Parts of 

single phase 

transformers, upto and 

including 25 KVA 

1 No. 1 

2 

CRGO Silicon Electrical steel 

sheets/ Coils 

OR 



Copper Wire 

Bars/Rods/Cathodes 

6.60 kgs/KVA 

8.25 kgs/KVA 

3.264 kgs/KVA 


4 Electrical Insulation materialskraft 

paper 

0.630 kgs/KVA 

5 Press Boards 0.420 kg/KVA 

6 Powder Coating Paint 0.102 kg/KVA 

7 CRCA Sheets 3.960 kgs/KVA 

Note: 1. CRCA Sheet is to be allowed in case of export of complete transformers only and not for active 

parts 


Transformers (Copper 

Wound)/Active parts of 

singel phase 

transformers, above-100 

KVA up to & including 

1000 KVA 


sheets/ Coils 

OR 

1.540 kgs/KVA 


Amorphous Electrical Steel 

1.925 kg/KVA 

2 Copper Wire 


1.606 kgs/KVA 



kraft paper 

0.105 kg/KVA 

5 Press Boards 0.074 kg/KVA 


7 CRCA Sheets 0.440 kgs/KVA 

8 Transformer Parts: 

a)Porcelain Bushings (HV) 

OR 

Porcelain Bushings Assembly 

(H.V) 

C254 

2 Nos. 

2 Nos. 

2 Nos. 

2 Nos.

9 

b)Porcelain Bushings (LV) 

OR 


(L.V.) 

Magnetic Oil Level Gauge 1 No. 

10 Pressure Vaccum Bleeder 1 No. 

11 Oil Temperature Indicator 1 No. 

Note: 1. CRCA Sheets is to be allowed in case of export of complete transformers only and not for active 

parts. 2) In case of item No. 8, if the transformer is for H.V, item 8(a) is to be allowed only. Similarly, in 

case of L.V., item 8(b) is to be allowed only. 


Transformers (copper 

Wound)/Active parts of 

single phase 

transformers, above 1000 

KVS, upto & including 

4000 KVA 


sheets/ Coils 

OR 

1.155 kgs/KVA 



1.445 kg/KVA 

2 Copper Wire 


1.445 kgs/KVA 



kraft paper 

0.035 kg/KVA 

5 Press Boardso 0.025 kg /KVA 


7 CRCA Sheets 0.198 kg/ KVA 

8 Transformer Parts: 

a)Porcelain Bushings (HV) 

OR 


(H.V.) 

b)Porcelain Bushings (LV) 

OR 

Porcelain Bushings Assemly 

(L.V) 

C255 

2 Nos. 

2 Nos. 

2 Nos. 

>2 Nos. 

2 Nos. 

9 Magnetic Oil Guage 1 No. 

10 Pressure Vaccum Bleeder 1 No. 

11 Oil Temperative Indicator 1 No. 

Note: 1. CRCA Sheet is to be allowed in case of export of complete transformers only and not for active 

parts. 

C1364 Steel Fence post 1 kg 1 Wire Rods 1.05 kg/kg content in 


2 Hot Rolled Coils 1.05 kg/kg content in 


C1365 Steeting Gear Assembly 1 kg 1 Steel Balls Net to net 

2 Castings (Machined) 

OR 

Net to net 

Cast Iron 1.45 kg/kg content in 


3 Forgings 

OR 

Net to net 

Bar SAE 8602 1.70 kg/kg content in 




5 Rubber (relevant) 0.65 kg/kg of rubber 

parts content in the

C256 




7 Bolts Net to Net 

Note: Item No. 6 Aluminium Ingots to be allowed for Steering Assembly with Aluminium Box 


"J" Type Halogen Lamps 

C1367 Lamp Socket Assembly 

for Auto Dash Board 

Instruments 

C1368 Aluminium foil Stock, 

Litho Stock, Closure 

Stock, Venetial Blind 

Stock, Sheets for PCB/ 

Sigh Boards in Sheet/ 

Coil Form 

C1369 Lapping Sleeves 

C1370 Mechanical Control 

Cable 


Fluoroescent Tubes upto 

20 watts 


Fluoroescent Tubes 36 

watts and 40 watts 

1 kg 1 Tungsten Wire (0.9mm & above 

dia) 

2 Molybdenum Wire (0.9mm & 

above dia) 

1.12 kg/kg of 

Tungsten Filament 

export weight 

excluding the weight 

of the mandrel. 

0.85 kg/kg of 

Tungsten Filament 

export weight 

excluding the weight 

of the mandrel 

3 Tungsten rod Up to 33% of the 

number of Tungsten 

Filaments exported. 

1 No. 1 Terminal Net to net 

2 Lamp (Wedge Type) Net to net 

1 kg 1 Aluminium Scrap 1.10 kg 

1 No. 1 Pig Iron 1.20 kg/kg content in 


2 Graphite 1.20 kg/kg content in 


3 Ferro Silicon 1.20 kg/kg content in 


4 Ferro Manganese 1.20 kg/kg content in 


5 Ferro Chrome 1.20 kg/kg content in 


6 Super Seed Inoculant 1.20 kg/kg content in 


1 No. 1 M.S. Spiralstrip Net to Net 

2 Modulator Control Valve Net to Net 

3 Armored MS/SS Wire Rope 1.05 Mtr./ Mtr. in 


4 Relevant Polyacetal Tube with 19 1.10 Mtr./Mtr. 

Strand Carbon Steel Wire Outer content in export 

Jacket of LDPE or Polypropylene product 

1000 Nos. 1 Tungsten Wire (Black) 36.70 gms 



1000 Nos. 1 Tungsten Wire (Black) 41.90 gms 



C1373 PVC Insulated Single 1 kg. 1 Copper Wire Rod 1.015 kg/kg content 

in export.

Core Cable 0.5 Sq. mm 2 PVC Compound 

OR 

C257 

2) a)PVC Resin 

b)Plastisizer (PVC) 

c)Filler (CaCo3) 

d)Lubricant (wax or Lead 

Stearate) 


export 

0.57 kg 

0.310 kg 

0.110 kg 

0.01 kg 

Note: The quantity of item 2(a) to 2(d) is per kg content of PVC Compound in the export product. 

C1374 Machined cast 

components for 

switchgears resistance 

welding parts, Heat 

Sinks, Diode bases 

manufactured out of high 

conductivity copper with 

other alloying elements 

like Chromium, Nickel, 

Beryllium, Cobalt and 

Silicon each not 

exceeding 5%conforming 

to BS 1400- 

HCC1/BS1400-CC1-TF/ 

DIN-17655 GCU L50- 

DIN 17655GCU CR 

F35/ASTMB 770-87a/ 

R40, R75, R76, R78, R80 

of AFNOR specification 

meeting conductivity 

requirements of 40 to 

90% IACS 

C1375 Machined cast Bushings 

of Automotive and Non 

Automotive applications, 

Pumps and value 

Components like casing, 

impellers, Discs, Plugs 

Yoke Sleeves, Seals, 

Spacers and Bearing, 

Hexagonal Nuts, 

Earthing Clamps 

manufactured out of gun 

metal or Lead Bronze or 

Red Brass OR with 

copper and allowing 

elements Tin, Lead and 

Zinc varying from 1 to 

10% each, Conforming to 

BS 1400-LB2,LG2, LG4 

Alloy BS1400-G3/DIN 

1705-RG5, RG7/ ASTMB 

584 OR ASTMB 763- 

C84400, 

C03200/C93700/SAE 660. 

1 kg 1 Cathode Copper and respective 

alloying element Chromium, 

Nickel, Cobalt, Beryllium and 

Silicon 

1 kg. 1 Gun Metal/ Red Brass/Leaded 

Bronze Ingot/Copper Cathode 

with alloying elements Tin, Lead 

and Zinc, Nickel 

C1376 Machined cast bushings 1 kg. 1 Brass ingots OR Copper Cathode 

with alloying elements like Zinc, 






the export product

of Automotive & Non- 

Automotive application, 

Machined cast 

components for valves 

internals including 

casing, 

impellers,discs,plugs, 

yoke sleeves, Yoke 

bushes,seals, spacers and 

bearing, Hexagonal nuts, 

earthing clamps, spindle, 

stems, wedges, seat rings 

etc. manufactured out of 

Silicon brass/Silicon 

Bronze/high tensile brass 

or with copper and 

alloying elements, like 

Zinc varying from 10- 

35% and other elements 

like Aluminium, 

Manganese, Silicon, Iron 

Lead each not exceeding 

5% conforming to ASTM 

B584-C87500, C87600, 

C87610/ASTM B371 

C1377 Machined cast bushings 

of Automotive & Non- 

Automotive application, 

Machined cast 

components for valves 

internals including 

casing, impellers, discs, 

plugs, yoke sleeves, Yoke 

bushes, seals, spacers and 

bearing, Hexagonal nuts, 

earthing clamps, spindle, 

stems, wedges, seat rings 

etc. manufactured out of 

Aluminium Bronze or 

with coper and alloying 

elements like Aluminium 

8 to 11% and Iron 1.5 to 

3.5 conforming to BS 

1400-AB1/ASTM B 148- 

C95200, C95300/DIN 

1714 GCUAL 10 FE. 

C1378 Writing Boards made of 

coated Steel Sheet 

Surface 

C258 

Aluminium, Lead, Manganese 

and Silicon 

1 kg. 1 Aluminium Bronze ingots OR 

Copper Cathode with alloying 

element Aluminium 



1 No. 1 Coated Steel Sheet Surface 1.02 kg/kg content in 


2 Galvanised Steel Sheet 1.02 kg/kg content in 


3 Aluminium Section 1.02 kg/kg content in 


4 ABS Moulding Powder 1.05 kg/kg. content in 


C1379 Brush Gear Assembly 1 No. 1 Carbon Brushes of relevant 4 Nos.

(for automobile starter 

motor) 

specification 

C1380 Clip Assembly 1 No. 1 Carbon Brushes of relevant 1 

specification 

2 Nos. 

C1381 Gear Assembly 1 No. 1 Alloy Steel Bars/ Billets 1.70 kg/kg content in 


C1382 Armoured/ Un-armoured 

PVC Insulated 

Submersible/ Flexible/ 

Control/ Power purpose 

Copper Cable rating upto 

1100 volts, not elsewhere 

specified 

2 Misc Items: Band Saw Blades, 

Die Block/ Steel, No Carb Paste, 

Diamond Dresser for ID 

Grinding, Diamond Dresser 

Blade for angular wheel grinding 

machine, Grinding Wheel, Gun 

Drill, Involute Spline Broach, 

Welding, Wires, Hob for 71 teeth 

gear, gear profile grinding wheel, 

fassler Diamond dressing wheel 

1 kg. 1 Copper Cathode/Wire Rod/Wire 

Bar 


OR 

C259 







2 a) PVC Resin 60% of PVC 

compound. 

b) Plasticizer (PVC) 30% of PVC 

Compound. 

c) Filler (Calcium Carbonate/ 

Alummina/ talc/ kaoline/China 

Clay 

10% of PVC 

Compound. 

3 Tinned Copper Wire 1.01 kg/kg content in 


4 Galvanised Steel Wire 1.02 kg/kg content in 


Note:Tinned Copper Wire shall be allowed in Tin Copper braided/Screened flexible Copper 

Cables.Wherever PVC stabilizer (including molybdenum trioxide/Tin Stabilizer) is asked for, it may be 

allowed upto 3% of the quantity of PVC compound, subject to reduction of the same %age in the quantity 

of PVC resin.Paraffin wax wherever used may be permitted upto 1% of PVC compound subject to same 

percentage reduction in filler quantity. 

C1383 Automotive Oil Filter/ 

Fuel Filter/Spin-on 

Filters/Oil or Fuel Filter 

Assembly Canister-Lub 

Oil Filter/ Air Filter 

C1384 Bicycle Frames made of 

Aluminium 

C1385 Plates for Lead Acid 

Storage Battery 

1 No. 1 CRCA Sheet/ Coil 1.45 kg/kg content in 

the export 

2 Filter Paper of Mean Pore size 4- 

14 Micron for Fuel Filter and 

Mean Pore 25-45 Micron for Oil 

Filter 


export 

3 PVC Adhesive Compound/ Glue Not exceeding 1% of 

FOB value of export 

4 Synthetic Rubber 1.10 kg/kg content in 

export 

1 kg. 1 Aluminium Extruded Tubes of 

relevant size in terms of I.D/ O.D 


export 

2 Filler Wire for Welding 2% of net weight of 


1 No. 1 Pure Lead 1.02 kg/kg content in 


2 Antimonial Lead Alloy of 




3 Fibre (CA Flock) Net to Net 

4 Vanislperse (Lignin) 1.04 kg/kg content in 

the export product

C1386 Railway Bogie for Meter 

Gauge Wagons (Weight 

14.2 MT) 

C1387 Tablet Compression 

Tools of Steel 

C1388 T-Rail Anchors made of 

Steel 

C1389 Automotive Flexible 

Exhaust Connectors 

(Corrugated) made of 


5 Tubular Bags Net to net. 

6 Cork Powder Net to net. 

1 No. 1 Non-Alloy Steel Scrap 2.238 MT 

2 Ferro Manganese 25 kgs. 

3 Ferro Silicon 21 kgs 

4 Welding Electrode 7 kgs 

5 Grinding Wheel 5 kgs 

6 Graphite Electrode 6 kgs. 

7 Industrial X Ray Film 9440 Sq. cms. 

8 Furnace Oil/LDO 212 Ltrs. 

1 kg. 1 Tool Steel Round Bar 1.35 kg 

1 MT 1 Carbon Steel Billets IS: 2830 1.05 MT 

1 MT 1 Stainless Steel Sheets/ Coils 

(relevant grade) 

2 Stainless Steel Wire/ Rods 

(relevant grade) 

C260 


in export 


in export 

3 Aluminised Steel Sheets/ Coils. 1.75 MT/MT content 


C1390 Deleted 

C1391 Mechanical Spray Pumps 1 No. A. COMPONENTS 

(15 mm to 20 mm) 

1 Body (Poly Ethylene) 1 No. 

C1392 Copper/Aluminium 

Conductors for XLPE 

Insulated Armoured 

/Unarmoured PVC 


1100V/L.T. 

2 Stem (Polyacetal) 1 No. 

3 Actuator (PE/PP) 1 No. 

4 Inner Gasket/ O Ring (Buna 

Rubber) 

1 No 

5 Steel Ball (Stainless Steel 304) 1 No. 

6 Aluminium Cap 1 No. 

7 Outer Gasket or Synthetic 

Rubber Sheet (Buna/ NBR) OR 

Thermoplastic Rubber Sheet. 

B. RAW MATERIALS 

700 gms for 1000 

Nos Gasket OR 700 

gms for 1000 Nos 

Gasket 

8 Aluminium Sheet (for Ferrules) 

OR 

2.60 gms. 

Aluminium Ferrule 

Net to Net 

9 Plastic Granules (for Dip Tube) 1.05 gm/gm content 

in export 

1 km 1 Continuous Cast Copper Rod/ 

Cathodes/ Wire bars/ Wire Rod 

(EC Grade) 



2 Aluminium Ingots/ Rods 1.01 kg/kg content in 


3 XLPE Compound/Cross Linkable 

LDPE Compound 


OR 

4 a) PVC Resin 

b) Plasticizer (PVC) 





60% of PVC 

Compound 

30% of PVC

C261 

c) Filler (Calcium 

Carbonate/Alumina/Talc/Kaolin/ 

China Clay 

Compound 

10% of PVC 

Compound 

5 Steel Armouring Wire 1.02 kg/kg content in 


Note: Wherever PVC Stabilizer (including molybdenum trioxide/Tin Stabilizer) is asked for, it may be 

allowed upto 3% of the quantity of PVC Compound, subject to reduction of the same %age in the quantity 

of PVC resin. Paraffin wax wherever used may be permitted upto 1% of PVC compound subject to same 

percentage reduction in filler quantity. 

C1393 Truck & Trailer Wheels 

C1394 All Aluminium Alloy 

Conductors 

C1395 Single Phase Shell 


aluminium or cast iron 

and covers - 0 Watt to 90 

Watts. 

1 No. 

(Weight 46 

Kgs +/-1%) 

1 Non-alloy Steel Plates for Rim 

(HSN No. 7208.52) 

24.43 kg 

2 Non-alloy Steel Plates for Disc 

(HSN No. 7208.51) 

24.64 kg 

3 Non-alloy Steel Sections for Ring 9.0 kg. 

Special 'Z' type Section (HSN 

No. 7216.50) 

OR 

1. Non Alloy Steel Plates for Rim 33.43 Kg 

Integral with Ring 

2. Non Alloy Steel Plate for Disc 24.64 Kg 

1 kg 1 a) Primary Unalloyed Aluminium 

OR 



the export 

OR 


in the export proudct. 

b) Magnesium 1.10 kg/kg content in 


c) Silicon 1.075 kg/kg content 


2 Aluminium Alloy Ingots/ Billets/ 

T-Bars/ Sows 



3 Aluminium Alloy Wire Rod 1.01 kg/kg content in 



(CRNO) Electrical Steel Sheets 

in Coil form 


OR 


2 

CRCA Steel Sheets in Coil form 

Copper Wire 

Bars/Cathods/Rods/Winding 

Wires/Strips 

10.41 gms/watt 

3 Electrolytic grade Aluminium for 10.00 gms/watt. 

Rotor 

4 Commercial grade Aluminium in 10.00 gms/watt 

Ingot form (upto 99.5% purity) 

for Housing 

OR 

OR 

15 gms.watt 

CRCA Sheet for Housing OR 

OR 

Mild Steel Sheet for Housing 

10.99gms/watt. 

5 EN-8 Alloy Steel for Shaft 

OR 

Stainless Steel for Shaft. 

9.65 gms/watt. 

6 Ball/Sleeve/Roller Bearing 2 Nos. (Net to Net). 

7 Composit insulation material upto 1.5% of FOB











consisting of paper, Nylon, 

Polyester, Amide, Nomex films, 

Varnish, Tpe, Polyester cord. 

8 Special packing material like 

Kraft paper for exportworthy 

packing lables, names plate, 

ribbon 

9 Motor protectors/thermal 

protectors/thermo strips. 

C262 

vlue of export. 


vlue of exports. 

Net to net. 

10 Power Capacotpr. 1 No. (Net to net). 

11 Plastic insulated wire/Cable. 6 Mtrs. (net to net) 

12 Terminals, connectors. 8 Nos. each (Newt to 

net). 

1 No. 1 Cold Rolled Non- Oriented 

(CRNO) Electrical Steel Sheets/ 

Sheets in Coil form 

OR 


CRCA Steel Sheets/ Sheets in 

Coil form 


2 Copper Wire Bars/ Cathods/ 

Rods/ Winding Wires/ Strips 

7.19 gms/Watt 

3 Electrolytic grade Aluminium for 5.58 gms/Watt 

Rotor 

4 Commercial Grade Aluminium in 6.00 gms/Watt 

Ingot form (upto 99.5% purity) 

for Housing 

OR 

9.00 gms/Watt 

CRCA Sheets for Housing 

OR 

Mild Steel Sheets for Housing 

8.36 gms/Watt 

5 EN-8 Alloy Steel for Shaft OR 

Stainless Steel for Shaft 

5.70 gms/Watt 

6 Ball/ Sleeve/ Roller Bearings 2 Nos. (Net to Net) 

7 Composit insulation material 


polyester, amide, nomex films, 

varnish, tape polyester cord 


Kraft Paper for exportworthy 

packing lables, name plate, 

ribbon 

9 Motor Protectors/ Thermal 

Protectors/ Thermo Strips 

Upto 1.5% of FOB 




Net to Net 

10 Power Capacitor 1 No. (Net to Net) 

11 Plastic Insulated Wire/Cable 6 Mtr. (Net to net) 

12 Terminals, Connectors 8 Nos. each (Net to 

Net) 





OR 


Coilform 




4.98 gms/Watt 


Rotor 

2.80 gms/Watt 

4 Commercial Grade Aluminium in 2.80 gms/Watt






Ingot form (Upto 99.5% purity) 

for Housing 

OR 


OR 

Mild Steel Sheets for Housing 



C263 

4.20 gms/Watt 

4.88 gms/Watt 

1.98 gms/Watt 

6 Ball/ Sleeve/ Roller Bearings 2 Nos. (Net to net) 




varnish, tape, polyester cord 




ribbon 







Net to Net 


11 Plastic Insulated Wire/ Cable 6 Mtr. (Net to net) 


net) 




OR 



Coil form 




2.76 gms/Watt 


Rotor 

2.80 gms/Watt 

4 Commercial Grade Aluminium in 2.80 gms/Watt 


for Housing 

OR 


OR 

4.20 gms/Watt 

Mild Steel Sheets for Housing 4.88 gms/Watt 



1.98 gms/Watt 

6 Ball/ Sleeve/ Roller Bearings 2 Nos. (Net to net) 








ribbon 







Net to net 




net) 

C1399 Single Phase Shell 1 No. 1 Cold Rolled Non-oriented 19.39 gms/Watt




751 Watts and above 

C1400 Bicycle Frames made of 

Aluminium 

C1401 Heat Recovery Wheel - 

Model HRW - 600 

C1402 Industrial Heat 

Exchanger (Shell and 

Tube/ Plate/Spiral Type) 



OR 


Coil form 




Rotor 

4 Commercial Grade Aluminium in 


for Housing 

OR 


OR>Mild Steel Sheets for 

Housing 

C264 


1.89 gms/Watt 

1.63 gms/watt. 

1.63 gms/Watt 

2.44 gms/Watt 

2.83 gms/Watt 



1.18 gms/Watt 

6 Ball/Sleeve/ Roller Bearings 2 Nos. (Net to net) 








ribbon 







Net to net 




net) 

1 No. 1 Aluminium Tube of relevant size 

in terms of LD/OD. 



2 Filler Wire for Welding 2% of net weight of 


1 No. 1 Aluminium Foil 1.05 kg/kg content in 


2 Molecular Sieve 3 Automised 

Activated Powder 

Net to net 

3 Clear Waterbase Upto 5% of the FOB 


4 Adhesives in Liquid form Upto 5% of the FOB 


5 Thinner Upto 5% of the FOB 


1 No. 1 Seamless Tubes 1.02 kg/kg content in 


2 B Q plates 1.05 kg/kg content in 


3 Stainless Steel Plates 1.05 kg/kg content in 


4 Low Alloy Steel Plates 1.05 kg/kg content in 


5 MiscellaneousItems: a) Stainless 

Steel Welding Electodes b) 

Carbon Welding Electrodes 


value of export.

C1403 Aluminium cops 

C1404 Nut & Shaft Assy. for 

Automobile 

C1405 Disc Horn 

C1406 Stainless Steel Casseroles 

of various designs (based 

on non CFC PU 

Insulation) 

C1407 Cow Magnets/ pill 

C1408 Steel Cable Drum in 

various sizes 

1 pc. 1 Aluminium Tubes/ Pipes 1.05 kg/kg content in 


2 ABS Granules (Relevant Grade) 1.05 kg/kg content in 


3 Nylon Granules (Relevant Grade) 1.05 kg/kg content in 


4 CRCA Sheet 1.05 kg/kg. content in 


1 No. 1 SAE 8602 Bar/ Round 1.20 kg/kg content in 




3 Steel Ball Net to Net 

1 No. 1 Spring Steel Strip 1.05 kg/kg content in 


2 Bakelite insulating Strip 1.02 kg/kg content in 


3 Stainless Steel Strips 3gms. 

4 Spring Steel Strips 13gms. 

5 Rivet Contacts. Net to net 



7 Copper Wire 1.02 kg/kg content in 


8 Insulating Bush Net to Net 

9 Adjusting Screw. Net to net 

10 G.F. Nylon 66 (for manufacture 

of bobbin). 

C265 

7gms. 

11 Glass Filled Nylon 66 1.05 kg/kg content in 


12 Hydrophonic Filter Net to net 

13 Nucleus 2 Nos. 

1 kg. 1 Stainless Steel Coil of relevant 

grade (.3-.5 MM thickness) 



2 Polyol 0.525 kg of PU 


product 

3 Isocynate (MDI) 0.525 kg of PU 


product 

4 ABS (Acrilonitrile Butadine 

Styrene) Plastic 

1 No. 1 Rare Earth Magnet (7 gm each) 

(Relevant diameters) 

2 Stainless Steel Casing 1 No. 

3 M.S. Pole PCs (Centre) 1 No 

4 M.S. Pole Pcs (Ends) 2 Nos. 

1 Kg. 1 CRCA Non Alloy Steel Sheet/ 

Coil 



2 Nos. 



2 H.R. Non Alloy Steel Sheet/ Coil 1.03 kg/kg content in 


3 Non Alloy Steel Round Bar 1.02 kg/kg content in 

the export product

C1409 Alloy Iron Powder Grade 

- FeCrMo (Cromaloy) 

C1410 Carbon/ Aloy Steel 

Seamless Tubes/ Pipes 

(Cold Finished) 

C1411 High Speed Steel (Non- 

Cobalt Grade) Tools 

Blanks (up to 15 mm dia) 

C1412 Deleted 

C1413 Deleted 

C1414 Lever Arch Mechanism 

(Index File Clip) with or 

1000 Kgs. 1 M.S. Scrap 1085 kgs. 

2 Low Carbon Ferro Chrome 

Lumps 

3 Low Carbon Ferro Molybdenum 8 kg 

1 MT 1 Carbon/ Alloy Steel Pipes/ Tubes 

(Hot Finished) Grade: ASTM 

A192 

1 kg. 1 H.R Rod/Wire Rod of High 

Speed Steel (Non-Cobalt Grade) 

1 Kg. 1 Cold Rolled Steel Strips/ Sheets 

(Coated or Uncoated) 

C266 

49.9 kgs. 

1.075 MT 





without Slide-in Plate 2 MS Wire Rod 1.05 kg/kg content in 


C1415 Cold Rolled Formed 

(Sections of Collapsible 

Gates) 

1 MT 1 HR Coil 1.08 MT 

C1416 Alloy Iron Powder Grade 1 Kg. 1 M.S. Scrap 880 gms 

- FeCu 80:20 2 Oxygen Free High Conductivity 220 gms 

Copper Ingots / Cathodes /Billets 

/ Scrap 


C1418 Cast Iron Castings (Mini 

blast Furnance and 

Cupola route) 

1000 kgs. 1 Low Ash Metallurgical Coke 

(Ash contents below 15%) 

495 kgs 

C1419 1 Core X 1000 Sq. mm 

1.1 KV Grade 

1 Km. 1 Aluminium rod E.C. grade 

having 99.6% purity (min.) 

2745 kg. 

Aluminium XLPE 

2 XLPE Compound 450 kg. 

insulated cable 3 PVC Resin 205 kg. 

C1420 Fine Cobalt Powder 

Grain size 0.5 - 2 Micron 

C1421 Electrode Holder mainly 

made of Copper /Brass. 

1 kg. 1 Cobalt Granules/ Cobalt 

Briquettes/Cobalt Cathodes 

OR 

Cobalt Chloride Solution 

containing Cobalt Metal 

1.04 kg. 

1.04 Kg. of Cobalt 

contained in Cobalt 

Chloride Solution 

1 kg. 1 Copper ingots OR Brass Scrap 1.05 kg/kg content 

2 Spring Steel wire 1.02 kg/kg content 

3 M.S. Wire/ Rod 1.10 kg/kg content 

4 CRCA Sheet 1.20 kg/kg content 

5 ABS Moulding 1.05 kg/kg content 

6 Silicon Rubber 1.05 kg/kg content 

C1422 Copper Conductors 1 kg. 1 Cast Copper Rod (EC Grade) 1 kg. 

(continuously transposed 

containing 5 to 31 

enamelled strips) 

2 

3 

Insulating Paper 

High density kraft paper 

7 gms 

4 gms 

C1423 Aluminium bottles/ cans 1 MT 1 Aluminium Ingot 1.05 MT 

C1424 Woven Asbestos Free 1 kg. 1 Glass Rovings 0.520 kg 

Clutch Facings 2 Nitrile Rubber 0.207 kg

C1425 Insulated Adjacent 

Jumpers (25A, 1.34 gms. 

weight) 

C1426 G-DS Clamp Pole Grey 

C1427 Aluminium Conductor 1 

Core X 630 Sq. mm 33 

KV(E) ALXLPE PVC 

AWA PVC Cables 




SAWA PVC Cables 


Core X 240 Sq.mm 

33KV(E) ALXLPE PVC 





AWA PVC Cables 






Core X 150 Sq. mm 6.6 


AWA PVC Cable 

3 Phenol Formaldehyde Resin 

(Powder Phenol Resin) 

C267 

0.095 kg 

4 Mangnesium Oxide 0.050 kg 

5 Potassium Titanate 0.040 kg 

6 Kevlar Dry Pulp 0.004 kg. 

1 No. 1 Copper contact 1 No. 

2 Polyamide (6.6) Grey 1.08 gms. 

1 No. 1 Wire Protect 2 Nos. 

2 Contact Pin 2 Nos. 

3 Screws 2 Nos. 

4 Polyamide (6.6) Gredy 1.18 gms. 

1 km. 1 EC Grade Aluminium Rods/ 

Ingots 

2297 kgs. 

2 Insulating Grade XLPE 

Compound 

1125 kgs 

3 Semi Conducting Grade XPLE 

Compound 

346 kgs. 

4 PVC Resin 685 kgs. 


Ingots 

1296 kgs. 


Compound 

2104 kgs. 


Compound 

598 kgs. 

4 PVC Resin 2255 kgs 

1 km 1 EC Grade Aluminium Rods/ 

Ingots 

2137 kgs. 


Compound 

2435 kgs. 


Compound 

685 kgs. 



Ingots 

735 kgs. 


Compound 

232 kgs. 


Compound 

121 kgs. 



Ingots 

1618 kgs. 


Compound 

765 kgs. 


Compound 

402 kgs 



Ingots 

712 kgs. 


Compound 

172 kgs 

3 Semi Conducting Grade XPLE 116 kgs.




CSAWA PVC Cables 






Core X 240 Sq. mm. 6.6 






CSAWA PVC Cables 







KV ALPVC PVC SWA 

PVC Cables 



KVAL PVC PVCSWA 

PVC Cables 


Core X 150 Sq. mm KV 

ALPVC PVCSWA PVC 

Cables 



KV ALPVC PVCSWA 

PVC Cables 

C268 

Compound 



Ingots 


Compound 

1296 kgs 

527 kgs. 


Compound 

335 kgs. 



Ingots 

1618 kgs 


Compound 

571 kgs. 


Compound 

386 kgs 


1 km. 1 EC Grade aluminium Rods/ 

Ingots 

2137 kgs 


Compound 

636 kgs 


Compound 

430 kgs 



Ingots 

1050 kgs 


Compound 

487 kgs. 

3 Semi Conducting Grade XPLE 329 kgs. 



Ingots 

2137 kgs 


Compound 

849 kgs 


Compound 

446 kgs. 



Ingots 

831 kgs 



Ingots 

1050 kgs 



Ingots 

1296 kgs 



Ingots 

1618 kgs 

2 PVC Resin 835 kgs




PVC Cables 




PVC Cables 




PVC Cables 




PVC Cables 




PVC Cables 




Ingots 

2137 kgs 



Ingots 

1108 kgs 



Ingots 

1728 kgs 



Ingots 

1907 kgs 



Ingots 

2158 kgs 



Ingots 

C269 

1277 kgs 

KV ALPVC PVC Cables 2 PVC Resin 460 kgs 


3.5 Core X 150 Sq. mm 

1.1. KV ALPVC 

PVCSWA PVC Cables 



1.1 KV ALPVC 




1.1 KV ALPVC 




1.1 KV ALPVC 




1.1 KV ALPVC 



3.5 Core X 95 Sq. mm 1.1 


PVC Cables 



1.1 KV ALPVC 



Ingots 

1496 kgs. 



Ingots 

1895 kgs 



Ingots 

3100 kgs 



Ingots 

2487 kgs 



Ingots 

1249 kgs. 



Ingots 

970 kgs 



Ingots 

3960 kgs. 

2 PVC Resin 1779 kgs.

C1455 DT Plus Module With 

Protection Insert with 

Test Contact with 

Arrestor and Gel 

C1456 DT Plus Module with 


Test Contact with Gel 

without Arrestor 

C1457 DT Plus Module without 


Test Contact with Gel 

C1458 DT Plus with Earth Plate 

and with modified cable 

entry with DT Plus 

Module, Protection 

Insert, Test Contact and 

Arrestor with Gel 

1 No. 1 Base Plate 1 No. 

2 Connection Contact incoming 2 Nos. 

3 Connection Contact outgoing 2 Nos. 

4 Intermediate Plate 1 No. 

5 Pressure Plate 1 No. 

6 Screw M7X46X7 1 No. 

7 Arrestor 1 No. 

8 Santoprene - 101-64 0.950 gm 

9 Makrolan - 2805 Natural 0.450 gm 

10 Crastin FR- 850 Natural 4.212 gms 

11 Makrolan - 6485 Green 3.510 gms 

1 No. 1 Base Plate 1 No 

2 Connection Contact incoming 2 Nos 





7 Santoprene - 101-64 0.950 gm 


9 Crastin FR - 850 Natural 4.212 gms 







6 Screw M7X7X46X7 1 No. 

7 Santoprene - 101 -64 0.950 gm 




3 Connection Contact outgoing 2 No. 




7 Arrestor 1 No. 

8 ABS UV FR 1210 Black 71 gms 

9 Santoprene - 101-64 5.250 gm 


11 Crastin FR 850 - Natural 4.212 gms 


C1459 1 No. 1 Base Plate 1 No. 

C270

DT Plus without Earth 

Plate and modified cable 

entry with DT Plus 

Module with Protection 

Insert, Test Contact with 

Gel 

C1460 DT Plus Module with 


Test Contact with 

Arrestor without Gel 



4 Intermediate Plate 1 No 

5 Pressure Plate 1 No 


7 ABS UV FR 1210 Black 71 gms 

8 Santoprene - 101-64 5.250 gm 


1 No. 1 Base Plate 1 No. 


3 Connection Contact outgoing 2 Nos 

4 Intermediate Plate 1 No 


6 Screw M7X46X7 1 No 

7 Arrestor 1 No 

8 Santoprene - 101 - 64 0.950 gms 


10 Crastin FR 850 - Natural 4.212 gms 


C1461 Castor Wheels 

1 No. 1 Relevant Ball/Taper Roller 

Bearing 

Net to net 

2 Non-Alloy Steel Sheet/ Plate 1.10 kg/ kg content in 


3 CRCA Sheet/ Coil (mm thick) 1.25 kg./ kg content 


4 Zinc 1% of net wt. of item 

No. 3 above. 

5 SBR/Natural Rubber/ Cast Iron 1.05 kg./ kg content 

(Depending on type or wheel) in the export product 

C1462 Frame and Field 1 No. 1 Ferrite Magnets 6 Nos. 

Assembly for 1.5 KW 

Automobile Starter 

2 HR (Non-alloy) Steel Sheet/ Coil 498 gms 


Motor 3 Spring Steel Sheet/ Coil (0.35 

mm thick) 

50 gms 

C1463 Complete Bicycle Along 

with Deraileur System & 

Chains 

1 No. 1 Deraileurs System & Chain 1 Set 

C1464 Stainless Steel Interlock 

Hose/ Hose Assembly 

1 MT 1 Stainless Steel Coil/ Sheet 1.25 MT 

C1465 Stainless Steel Bellow/ 

Bellow Assembly 

1 MT 1 Stainless Steel Coil/ Sheet 1.46 MT 

C1466 Aluminium Grills 

Anodised 

C1467 Brake Drum made of 

Alloy Cast Iron (Rough 

Castings) 

1 kg. 1 Aluminium Ingots 1.06 kg/kg content in 




3 Ferro Alloys (Fe.Si., Fe.Mn., 

Fe.Cr.) 

C271 

0.015 kg

4 Metallurgical Coke 0.13 kg 

5 Inoculant 25C & equivalent 0.004 kg 

6 Paints & Rust Preventive Oil 0.010 kg 

Note: In the case of Machined Castings the above quantities of import items at each Sl.No. 1 to 5 are to be 

multiplied by factors as given below: 

a) Less than 10 kg/piece - 1.36 

b)10 kgs. to 100 kgs/ piece - 1.25 

C1468 Stainless Steel Dye 

Springs made Out of 

AISI 316 or AISI 304 

C1469 Cistern Side Inlet valve, 

Cistern Bottom Inlet 

Valve, Cistern Outflow 

Valves 


C1471 Finished Cup 

(Component of Tapered 

Roller Bearing) 

C1472 Split Retaining Rings of 

Cabbon Steel 

1 kg. 1 Stainless Steel Wire (AISI 316 or 

AISI 304) of relevant Diameter 

C272 

1.02 kg 

1 kg. 1 St.Steel Rod 1.02 kg/kg content in 


2 Polyacetal 1.15 kg/kg content in 




1000 Nos. 1 Forged/ Turned Outer Ring in 

unfinished condition (relevant 

size) 

1 kg. 1 Carbon Steel plates of relevant 

Grade 

1100 Nos. 

1.05 kg 

(Galvanised) 2 Zinc 4% of the net weight 

of Steel in the export 

product. 

C1473 Split Retaining Rings of 

Stainless Steel in SS 516 

or 340 

C1474 Deleted 

C1475 Compressor Mounting 

Brackets/Hanger 

Brackets/ mounting 

Spring Brackets/ 

Overload Brackets 

C1476 Locating Cup/Muffler 

Assembly (Suction/ 

Discharge/ Shockloop 

Assy./ Protective Cover 

Bale Strap/ Discharge 

Valve retainer 

C1477 Phosphor Copper 

C1478 Manganese Copper 

1 kg. 1 Stainless Steel of relevant Grade 1.05 kg. 

1 kg. 1 CRCA Sheet/ Coil (prime/ 

Defective) 

1 kg 1 CRCA Sheet/ Coil (Prime/ 

Defective) 





1 kg. 1 Copper Cathodes/ Copper Wire 

Bars 

0.875 kg 

OR 

Copper Scrap 

0.9026 kg 

2 White/ Yellow Phosphorous 0.154 kg 

1 kg. 1 Copper Cathodes/ Copper Wire 

Bars 

0.707 kg 

OR 

Copper Scrap 

0.735 kg 

2 Manganese 0.303 kg 

C1479 Alloy Aluminium 1 kg. 1 Primary Unalloyed 

Conductor Steel a) Aluminium 1.02 kg/kg content in

Reinforced (AACSR) 

C1480 Washing Machine 

28 

C273 

Relevant insulated Copper Wire 

0.5 mm dia 




c) Silicon 

OR 

Aluminium Alloy Ingots / Billets 

/ T-Bars/ Sows/ Wire Rods 





2 High Carbon Steel Wire/ Rod 1.02 kg/kg content in 


3 Zinc 4% of the weight of 

Steel Content 

1 No. 1 Washer - P Net to Net 

2 Belt. V Net to net 

3 Door SW ASM Net to Net 

4 Buzzer ASM Net to net 

5 Capacitor Net to net 

6 Gear Case Assembly Net to net 

7 Plunger Valve Strap Net to net 

8 Timers Net to Net 

9 Block Brake Net to net 

10 Motors (Relevant) Net to net 

11 P.V. Bellow Net to Net 

12 Net Net to net 

13 Bellows ASM Net to net 

14 Powder Cord Net to net 

15 Adapter Net to net 

16 Polypropylene Resin 

OR 



16 Expanded Polysterene 1.02 kg/kg content in 


17 Resin ABS 1.04 Kg/Kg content 


18 Galvanized Precoated Steel Sheet As per general note 

for packing material 

19 High Impact Polystyrene 1.04 Kg/Kg content 


20 Aluminium Ingots 1.04 Kg/Kg content 


21 Styrene Acrylo Nitrile 1.04 Kg/Kg content 


22 Polyethylene Resin 1.04 Kg/Kg content 


23 Ethylene Vinyl Acetate 1.04 Kg/Kg content 


24 Polyacetal GC25 1.04 Kg/Kg content 


25 Polyester band Net to net 

26 Nylon Cloth for Capicitor Cover Net to net 

27 S.S. Sheet for flat spring Net to net 

1.01 metre/ metre 

content in export

C1481 Battery Type NCSP-B- 

40600D (Nickel Cadmium 

batteries) 24 Volts, 40 

AH. 

C1482 Pneumatic Demolition 

Tool 

C1483 Pneumatic Tools Chipper 

- 1" to 4" Cylinder 

C274 

product 

29 Relevant grease 4 gms/machine 

30 Other relevant Components As per General Note 

No. 4 of Engineering 

Group 

31 Expanded Polysterene 1.02 Kgs/Kg content 


1 No. 1 Nickel Fibremat Fibrex 

OR 

Nickel Powder 

40.00 Sq. ft. 

2 Nylon moulding granules/ 

powder 

4.48 kgs. 

4.10 kgs. 

3 Nonwoven Separator (Viledon) 

FS 2115 

18.00 sq. mtr 

4 NIckel Powder type 255/287/210 4.00 kgs 

5 5 Celgard ® 3400 Flat 

Sheet/Film. 

16.00 sq. mtr. 

6 Battery connector 1 No. 

7 Metregrip 303 LV epoxy 

adhesive activator 

0.50 ltrs. 

8 Metregrip 303 LV Epoxy 

Adhesive base 

0.50 ltrs. 

1 No. 1 Valve Assembly & Case One No. Each on net 

to net basis 

2 Valve Case Cover 

3 Valve 

4 Valve Case Spacer 

5 Retainer latch 

6 Bushing Latch 

7 Back Head Complete 

8 Throttle Lever 

9 Front Head 

10 Front Head Spring 

11 Front Head Bold 

12 Retainer Latch Pin (outer) 

13 Air Inlet Nut 

14 Anvil Block 

15 Anvil Block Bushing 

16 Piston 

17 Back Head Bolt 

18 Air Inlet Swivel 

19 Cyliner 

20 Retainer Latch Pin (inner) 

1 No. 1 Throttle Valve One No. each on net 

to net basis. 

2 Throttle Valve Tube 

3 Bushing Permanent 

4 Throttle Lever

C1484 ALPVCP VCSWP 

VC(1.1 kv) 

C1485 ALPVCSWPVC (1.1 kv) 

C1486 ALPVCPVCSWP VC(1.1 

kv) 

C1487 Earth Moving Wheels 

having dia not less then 

25" 

3x240 Sq. 

mm 

1x150 Sq. 

mm 

3.5x95 Sq. 

mm 

5 Handle 

6 Upper Valve case Lid 

7 Valve Case 

8 Piston 

9 Cylinder 

10 Retainer 

11 Bushing-Round/ Hex 

12 Collar Lock 

13 Exhaust Shield 

1 Al. Ingot/ Rod 2.024 kg. per m 

2 PVC Resin 1.053 kg. per m 

3 DIDP .3786 kg. per m 

1 Aluminium Ingot/ Rod 0.426 kg. per m 



1 Al. Ingot/ Rod 0.970 kg. per m 



1 No. 1 HR Plate/ HR Plate in coil form 1.20 kg/kg content in 

the export prouct. 

2 HR Sections 1.09 kg/kg content in 


3 Billet 1.20 kg/kg content in 


4 Paint 

5 Thinner 

6 Welding wire 

7 Flux 

Note: 1. CIF value of Import item No. 4&5 taken together shall be restricted to 3% of FOB vaslue of 

export. 

2. Quantity of import item No. 6&7 taken together limited to 3% of weight of Steel to be welded. 

C1488 Deleted 

C1489 Rear Axle Housing 

Assembly for LCV/HCV 

C1490 Finned Tubes 

1 kg. 1 H.R. Steel Plates/Coils (8 mm to 

15 mm) 

2 Forgings (Machined) OR 

Forgings (Rough) OR Non 

alloy/alloy steel 

bars/rods/billets/blooms/ingots. 

1 MT 1 Seamless Steel/ ERW tubes or 

pipes 

2 CRSS/HRSS/ CRCS/ HRCS 

strips or coils 

C1491 1 kg. 1 Iron Powder Atomised 0.470 kg 

C275 



Net to net or 


the export product Or 





1.125 MT/ MT 


product.

Sintered Bronze Bushes 

& Part EP Grade 

C1492 Cold Rolled Grain 

Oriented Silicon 

Electrical Steel Sheets/ 

Coils 

C1493 Pneumatic Tool (Air 

Hoists) upto 1000 kg. 

lifting capacity 

2 Copper Mill Scale 0.580 kg 

3 Solid Lubricant Powder 0.0106 kg. 

4 Lubricating Oil 0.0403 kg. 

1 MT 1 Hot Rolled Silicon Electrical 

Steel Wide Coils of relevant 

Grade containing 2.5% - 3.5% 

Silicon 

1180 kgs. 

2 Mgo Powder for coating 4.2 kgs. 

3 IN-Organic Coating (Remisol 

coating liquid/ corrosive liquid) 

10 kgs. 

4 Picking Oil 0.5 kg. 

5 Steel Strapping As per packing policy 

6 VCI Rusto paper As per packing policy 

1 No. 1 Relevant Ball Bearing 4 Nos. 

2 Relevant Chain Link 1 No. 

3 Relevant Cap Brake 1 No 

4 Frame 1 No. 

5 Gear Internal 1 No. 

6 Liner 1 No. 

7 Motor Housing 1 No. 

8 Muffler 1 No. 

9 Retainer Body 1 No. 

10 Shaft-Sprocket 1 No. 

11 Shaft-Rotor 1 No. 

12 Sprocket (4 pocket) 1 No. 

13 Washer 1 No. 

14 Sprocket (6 pockets) 1 No. 

Note: (i) Import item at Sl.No. 14 shall be allowed only if export products has a lifting capacity of (501- 

1000 Kgs).(ii) Import shall be permitted on net to net basis with accountability clause. 

C1494 Pneumatic chipper with 

cylinder Bore Chrome 

Lined 1" to 4" Cylinder 

1 No. 1 Relevant Throttle Valve One No. each (with 

accountability 

clause). On net to net 

basis 

2 Relevant Throttle Valve tube 

3 Relevant Bushing permanent 

4 Relevant Lever Throttle 

5 Relevant Lid-Upper Valve case 

6 Relevant Case Valve 

7 Relevant Lid lower valve case 

8 Relevant Collar Lock 

9 Relevant Exhaust Shield 

10 Relevant Handle 

11 Relevant Retainer (Chisel sleeve) 

12 Relevant Cylinder (Chrome 

Lined Bore) 

13 Relevant Piston 

C276

C1495 Pneumatic Tool Heavy 

Duty Air Hoist - Rated 

Capacity above 909 kg. 

(2000 pounds) up to and 

including 1818 kg. (4000 

pounds). 


Duty Air Hoist - Rated 

Capacity above 455 kg. 

(1000 pounds) upto and 

including 909 kg. (2000 

pounds). 

1 No. 1 Relevant Chain Load 1 No. 

2 Relevant Guide- Chain 1 No. 

3 Relevant Handle 1 No. 

4 Relevant Motor Housing 1 No 

5 Relevant Limit Stop 1 No 

6 Relevant Cover Worm Gear 1 No. 

7 Relevant Cover Motor 1 No. 

8 Relevant Cover Spur Gear 1 No. 

9 Relevant Yoke 1 No. 

10 Relevant End Plate Upper 1 No. 

11 Relevant End Plate Lower 1 No. 

12 Relevant Liner 1 No. 

13 Relevant Self Lubricanting Bush 2 Nos. 

14 Relevant Chain Handle 1 No. 


16 Relevant Worm 1 No. 

17 Relevant Worm Gear 1 No. 

18 Relevant Throttle Lever 3 Nos. 

19 Relevant Gasket 7 Nos. 

20 Relevant Strainer Air 1 No 

21 Relevant Muffler 1 No. 

22 Relevant Suspension Bail 1 No. 

23 Relevant Hose Clamp 3 Nos. 

24 Relevant Needle Bearing 2 No. 

25 Relevant Ball Bearing 6 Nos. 

26 Relevant Block Assembly Bott. 1 No. 

1 No. 1 Relevant Chain Load 1 No. 

2 Relevant Guide- Chain 1 No. 

3 Relevant Motor Housing 1 No. 

4 Relevant Limit Stop 1 No. 

5 Relevant Chain Guide 1 No. 

6 Relevant Valve Housing 1 No. 

7 Relevant Cover Worm Gearing 1 No. 

8 Relevant Cover Motor Hook 1 No. 

9 Relevant Cover Spur Gearing 1 No. 

10 Relevant End Plate Upper 1 No. 

11 Relevant End Plate Lowder 1 No. 

12 Relevant Liner 1 No. 

13 Relevant Valve Throttle 1 No. 

14 Relevant Self Lubricating Bush 2 Nos. 

15 Relevant Hook (Bare) 1 No. 

16 Relevant hook Bare 1 No. 

C277

C1497 Pneumatic Tool Scabbler 

with 3000 BPM (Blows 

per minute) 

C1498 Pneumatic Tool Hand 

Drill with Drilling 

Diameter upto 1-1/4" 

(one and a quarter inch) 

with muffler 

17 Relevant Chain Handle 1 No. 


19 Relevant Worm 1 No. 

20 Relevant Work Gear 1 No. 

21 Relevant Throttle Lever 2 Nos. 

22 Relevant Gasket 7 Nos. 

23 Relevant Strainer Air 1 No. 

24 Relevant Muffler 1 No. 

25 Relevant Needle Bearing 2 Nos. 

26 Relevant Ball Bearing 7 Nos. 

1 No. 1 Relevant Cap Cylinder 1 No. 

2 Relevant Piston & Carbide tip 

assembly 

C278 

3 Nos. 

3 Relevant Cylinder 1 No. 

4 Relevant Handle Bent 1 No. 

5 Relevant Handle Cylinder 1 No. 

6 Relevant Bushing Cylinder 3 Nos. 

7 Relevant Bushing Reducer 1 No. 

8 Relevant Throttle Valve Lever 1 No. 

9 Relevant Throttle Valve Body 1 No. 

10 Relevant Throttle Valve 1 No. 

11 Relevant Air Strainer 1 No. 

1 No. 1 Relevant Air Inlet Bushing 1 No. 

2 Relevant Throttle Valve Bushing 1 No. 

3 Relevant Throttle Lever 1 No. 

4 Relevant Pipe Plug 1 No. 

5 Relevant Handle (Bare) 1 No. 

6 Relevant Through Bolt 2 Nos. 

7 Relevant Air Tube comp 1 No. 

8 Relevant Cylinder bush 1 No. 


10 Relevant Piston 1 No. 

11 Relevant Front Valve seat 1 No. 

12 Relevant Valve 1 No. 

13 Relevant Rear Valve seat 1 No. 

14 Relevant wire retainer 1 No. 

15 Relevant front head 1 No. 

16 Relevant Chuck 7/8" hex 1 No. 

17 Relevant Chuck Sleeve 1 No. 

18 Relevant Plunger shifter 1 No. 

19 Relevant Ratchet ring 1 No. 

20 Relevant Pawl 2 Nos. 

21 Relevant Shifter Sleeve 1 No.

C1499 Pneumatic Tool Scabbler 

with 2900 BPM (Blows 

per Minute) per piston. 

C1500 Pneumatic Tool Hand 

Drill with Drilling 

Diameter upto 1-1/4" 

(one and a quarter inch) 

without muffler 

C1501 Low Carbon Ferro 

Manganese 

C1502 Medium Carbon Ferro 

Manganese 

C1503 Continuous cast copper 

rod/copper wire 

rod/cathode 

C1504 Cold Rolled Non Grain 

oriented Silicon electrical 

Steel Sheet/ Coils in fully/ 

semi processed state 

22 Relevant Muffler complete 1 No. 

1 No. 1 Relevant Piston & Carbide tip 

assembly 

C279 

3 Nos. 


3 Relevant Live air Handle 1 No. 


5 Relevant Air Inlet Nipple 1 No. 

6 Relevant Dead handle 1 No. 

1 Relevant Air Inlet Bushing 1 No. 


3 Relevant Throttle Lever 1 No. 

4 Relevant Pipe Plug 1 No. 

5 Relevant Handle (Bare) 1 No. 

6 Relevant Through Bolt 2 Nos. 

7 Relevant Air tube comp 1 No. 

8 Relevant Cylinder bush 1 No. 



11 Relevant Front Valve seat 1 No. 


13 Relevant Rear Valve seat 1 No. 

14 Relevant wire retainer 1 No. 

15 Relevant front head 1 No. 

16 Relevant Chuck 7/8" hex 1 No. 

17 Relevant Chuck Sleeve 1 No. 

18 Relevant Plunger shifter 1 No. 

19 Relevant Ratchet ring 1 No. 

20 Relevant Pawl 2 Nos. 

21 Relevant Shifter Sleeve 1 No. 

22 Relevant Hose tail 1 No. 

1 MT 1 Aluminium Ingot/ Aluminium 

Powder 

1 MT 1 Aluminium Ingot/ Aluminium 

Powder 

500 kgs. 

250 kgs. 

1 MT 1 Copper Concentrate 1.06 MT Copper 

content in Copper 

Concentrate/ MT of 


1000 kg. 1 Hot Rolled Silicon Electrical 

Steel Wide Coils of relevant 

grade containing 0.60% to 3.4% 

Silicon with varying quantity of 

Aluminium 

1125 kg 

2 Organic Coating/ Inorganic 

Coating 

5 kgs. 

3 Pickling Oil 0.5 kg. 

4 Steel Stripping As per packing

C280 

Policy 

5 VCI Rusto paper As per packing policy 

6 Cold Rolling Mill Rolls 1.00 kg 

7 Mineral Based Rolling Oil 0.35 kg 

Note: Import item No.2 will not be allowed if export product is CRNO in Semi processed state. 

C1505 Hermatic Compressor 

C1506 Identifiable ready-to-use 

machined parts/ 

components made wholly 

or predominantly of 

Carbon Steel/ Non Alloy 

Steel (not less than 90% 

by weight) manufactured 

through forging process, 

not elsewhere specified 

C1507 Identifiable ready to use 




Alloy Steel/ Stainless 



through forging process, 


1 No. 1 Relevant Valve Plate 1 No. 

2 Relevant Gas Pump assembly 1 No. 

3 Crankshaft Assembly 1 No. 

4 Suction Valve 1 No. 

5 Discharge Valve 1 No. 

6 Cylinder Head 1 No. 

7 Stator 1 No. 

8 PTC Relay below 7 AMP 1 No. 

9 Bi-metal thermostat/ motor 

protector 

1 Kg. 1 Forging Quality Carbon Steel/ 

Non Alloy Steel Bars/ Rods/ 

Billets/ Blooms/ Ingots (Relevant 

Material) 

2 Chemicals Rust Preventing Oil/ 

Primer/ Paints 

3 Misc.items: Refractory material, 

Die Steel/ Die Blocks, Cutting 

Tools, Cutters Sawing Blades 

including bimetallic Bandsaw 

blades steel shots, fuel oil, heat 

treatment chemicals, quenching 

oil and lubricants 

1 kg. 1 Forging Quality/ Alloy Steel/ 

Stainless Steel Bars/ Rods/ 

Billets/ Blooms/ Ingots (Relevant 

Material) 

2 Chemicals: Rust Preventing 

Oil/Primer Paints 

3 Misc. Items: Refractory material, 

Die Steel/ Die Blocks Cutting 

Tools, Cutters, Sawing Blades 

including bimetallic Bandsaw 

blades steel shots, fuel oil, heat 

treatment chemicals, quenching 

oil and lubricants. 

1 No. 


export 


of export 


of exports 


export. 


of exports. 


of exports 




or predominantly of Iron 

(not less than 90% by 

weight) manufactured 

through casting process, 


1 kg 1 Pig Iron 1.25 kg. 

Note: The above norms are for the export product wholly made of Pig iron. For the export product 

constituting Pig Iron less than 100% and upto 90% by weight, the import requirement of Pig iron shall be 

proportionately reduced. 



1 MT 1 Major Raw materials comprising 

of Carbon Steel/ Non-Alloy Steel 

1700 kgs.



Carbon Steel/ Non Alloy 



through Casting Process, 


C281 

Melting Scrap 

2 Additives comprising of: 50 kgs. 

a) Core Wire/ Scrap/ Ingots/ 


b) Core Wire/ Lumps Powder of 


c) Lumps/ Powder of Misch 

Metall 

d) Ferro Silicon 

e) Ferro Manganese 


a) i)Resin Coated Sand 

ii) Organic binders 

b) i) Graphite electrode 

ii)Welding Electrode 

iii) Mould Wash/ Mould coat 

iv) Grinding Wheel 


a) Porous Plugs/ Seat Blocks/ 

Sleevers/ Slide Gate Plates 

b) Direct Bonded Basic Bricks 

c) Monolithic/ Gunning/ 

Ramming/ Castables 

d) Dolomite/ Magnesia Carbon 

Bricks 




4 Furnace Oil/ Diesel Oil for i) 

Ladle heating ii) Moulding 

Heating iii) Heat Treatment 

450 kgs 

200 kgs. 

7.5 kgs 

12.5 kgs 

31 kgs 

6kgs 

37.5 kgs 

9440 Sq. Cm. 

265 Ltrs. 

1. The above norm is applicable only if the export products are manufactured through electric Arc 

Furnace/ Induction Finance Route using melting Scrap as Shown at item No. 1(a)2. In case the products 

are manufactured through the Induction Furnace route,item 3(b)(i) will not be allowed 

3. The above norms are for the export product wholly made of Non Alloy Steel. For the export product 

constituting less than 100% and upto 90% Non Alloy Steel by weight,the import requirements of import 

items at S.No. 1 to 3 shall be proportionately reduced. 





Alloy Steel (other than 

Stainless Steel) (not less 

than 90% by weight) 

manufactured through 

Casting Process, not 


1 MT 1 Major Raw Materials comprising 

of: 

a) Non-Alloy Steel Melting Scrap 1594 kgs 


i) Charge Ferro Nickel/ Nickel 

Oxide Sinter 

OR 

Nickel 

ii) Ferro Chrome 

iii) Ferro Manganese 

iv)Ferro Molybdenum 

v) Ferro Silicon 


a) Core wire/ Scrap/ Ingots/ shots 

of Aluminium 

b) Calcium silicide (CaSi) 

c) Selenium 

d) Lumps/ Powder of Misch 

Metal 

3 Miscellaneous items 

a) i) Resin coated Sand 

ii) Organic binders 

75 kgs 

30 kgs 

21 kgs 

25 kgs 

31 kgs 

25 kgs 

6 kg 

450 kgs 

200 kgs





Stainless Steel (not less 

than 90% by weight) 


Casting Process, not 


b) i) Graphite Electrode 

ii) Welding electrode 

iii) Mould Wash/ Mould Coat 


v) Refractories 



b) Direct Bonded Basic Bricks 

c) Monolithic/ Gunning/ 

Ramming/ Castables 


Bricks 

C282 

7.5 kgs. 

12.5 kgs 

31 kgs 

6 kgs 

37.5 kgs 


(various Grades for Gamma Rays 

Iridium 192 & Cobalt 60) 

9440 Sq. Cm. 


Ladle Heating ii) Mould Heating 

iii) Heat treatment 

265 Ltrs. 

1 MT 1 Major Raw Materials comprising 

of: 

a) Stainless Steel Melting Scrap 862.5 kgs 

b) Iron Flakes/ Pure Iron/ Iron 

Powder 

c) i) Ferro Chrome 

ii)Charge Nickel Oxide Sinter/ 

Ferro Nickel 

OR 

c)i) Ferro Chrome 

ii)Nickel 

iii) Ferro Manganese 

iv)Ferro Molybdenum 

v) Ferro Silicon 


a) Core wire/ Scrap/ Ingots/ 


b)Core wire/ Ingots/ powder of 

CalciumSilicide(CaSi) 

c) Selenium 

d) Lumps/ Powder of Misch 

Metal 


a) i) Resin coated Sand 

ii)Organic binders 

b) i) Graphite Electrode 

ii) Welding electrode 

iii) Mould Wash/ Mould Coat 


v) Refractories 



b) Direct Bonded Basis Bricks 

c)Monolithic/ Gunning/ 

ramming/ Castables 


Bricks 

387.5 kgs 

400 kgs 

87.5 kgs 

125.0 kgs 

12.5 kgs 

62.5 kgs 

25 kgs 

6.25 kgs. 

1562.5 kgs 

200 kgs 

7.5 kgs 

12.5 kgs 

31.25 kgs 

6.25 kgs 

37.5 kgs 


(various Grades for Gamma Rays 

Iridium 192 & Cobalt 60) 

9440 sq. cm 


Ladle Heating ii) Mould Heating 


265 Ltr.

Note: The above norm is applicable only if the export product are manufactured through Electric Arc 

Furnace/ Induction furnace Route using Melting Scrap as shown at item No. 1(a)2. In case the products 

are manufactured through the induction Furnace route,item 3(b)(i) will not be allowed. 

3. The above norms are for the export product wholly made of Stainless Steel. For the export product 

constituting Stainless Steel less than 100% and upto 90% by weight, the input requirements of import 

items a. No. 1 to 3 shall be proportionately, reduced. 

C1512 Refrigerator Display 

Cabinet (Capacity to be 

Indicated) 

C1513 Pneumatic Tool-Clay 

Digger (Picks) with 

outside Trigger, Throttle 

Latch Retainer 

1 No. 1 Electro Galvanised Steel sheets 

pre-painted 0.5 mm thick 

2 Relevamt Stainless steel sheet 0.4 

mm thick 

3 ABS/HIF with GPPS (General 

Purposel poly sheets) 

4 Polyurethane foam chemical total 

foam weight:a) 

Polyol 

C283 

b) Isocyanate 

c) Cyclo-pentane 

5 Relevant Hermetically sealed 

compressors 

6 Relevant Fan Motors 

a)Evaporator cooling 

b) Compressor/ condensor 

cooling 

7 Relevant thermostate 1 No. 













One set (Net to Net) 

On net to net basis 


8 Copper tube 6.350x0.6 mm thick 1.03 kg/kg content in 


9 Copper capillary tube 1.03 kg/kg content in 


10 Relevant Filter Drier (Copper) 1 No. 

11 Relevant Evaporator (cu tube, Al 

fin) 

1 No. 

12 Relevant Condensor (cu tube, Al 

fin) 

1 No. 

1 No. 1 Relevant Air Inlet Nipple 1 No. 

2 Relevant Head Bolt 1 No. 



5 Relevant Fronthead 1 No. 


7 Relevant Latch Retainer Bolt 1 No. 

8 Relevant Valve Block 1 No. 


10 Relevant Chuck bushing 1 No. 

11 Relevant Retainer-Latch 1 No. 

12 Relevant Lever - Throttle Valve 1 No. 

13 Relevant Handle Assembly 1 No.

C1514 Pneumatic Tool-Light 

Simplate Valve Temper 

with Bore and Stroke size 

1 7/16"X6" (36.5 mm X 

152.45 mm) 


duty Ring volve Temper 

with Bore and Stroke size 

upto 2 1/4" X 6" (two and 

quarter inch X six inch) 

(57.2 mm X 152 mm) 

14 Relevant Latch Ret Bolt Bushing 

1 No 1 Relevant Elbow 1 No. 


3 Relevant throttle valve Lever 1 No. 

4 Relevant throttle valve Body 1 No. 

5 Relevant throttle Valve 1 No. 

6 Relevant Nipple 1 No. 

7 Relevant Cylinder Head 

Assembly 

C284 

1 No. 

8 Relevant Oil Regulating Plug 1 No. 

9 Relevant Upper Valve case Lid 1 No. 

10 Relevant Valve case 1 No. 

11 Relevant Lower Valve case lid 1 No. 

12 Relevant Exhaust Deflector 1 No. 

13 Relevant Piston with Plug 

Assembly 

1 No. 


15 Relevant Retainer Nut 1 No. 

16 Relevant Retainer 1 No. 

17 Relevant Piston Rod Bushing 1 No. 

18 Relevant Piston PKG 1 No. 

19 Relevant Piston Bushing 1 No. 

20 Relevant aluminium Butt 1 No. 

21 Relevant Lock nut 1 No. 

1 No. 1 Relevant Streat Elbow 1 No. 


3 Relevant Throttle Valve Lever 1 No. 

4 Relevant Throttle Valve Body 1 No. 

5 Relevant throttle Valve 1 No. 

6 Relevant Nipple 1 No. 

7 Relevant Cylinder Head 

Assembly 

1 No. 

8 Relevant Valve Lid 1 No. 


10 Relevant valve Box 1 No. 

11 Relevant Lock Clip 1 No. 

12 Relevant Exhaust Clip 1 No. 

13 Relevant Piston with Plug 

Assembly 

1 No. 

14 Relevant Cylinder & Bushing 

Assembly 

1 No. 

15 Relevant Piston Packing 1 No. 

16 Relevant Lock Clip 1 No. 

17 Relevant Piston Gland nut 1 No. 

18 Relevant Piston Gland Sleeve 1 No.

C1516 Pneumatic Tool Rammer 

C1517 Pneumatic Tool Clay 

Digger round (picks) with 

outside trigger Sleeve 

Retainer and round/ 

Square Chuck 

C1518 Submerssible Water 

Pump of various Horse 

Powers (HP) 

19 Relevant Butt 1 No. 

20 Relevant Lock Nut 1 No. 

1 No 1 Relevant Valve 1 No. 

2 Relevant Throttle valve lever 1 No. 


4 Relevant Cylinder Head 1 No. 

5 Relevant Upper Valve Case Lid 1 No. 

6 Relevant Valve Case 1 No. 

7 Relevant Lower Valve Case Lid 1 No. 

8 Relevant Piston & Plug 

Assembly 


Assembly 

C285 

1 No. 

1 No. 

10 Relevant Bushing 1 No. 

11 Relevant Piston Packing 1 No. 

12 Relevant Piston Bushing 1 No. 

13 Relevant Check Nut 1 No. 

14 Relevant retainer 1 No. 

15 Relevant Rubber Butt 1 No. 

1 No. 1 Relevant Cylinder 1 No. 

2 Relevant Sleeve 1 No. 

3 Relevant Handle & Bush 

Assembly 

1 No. 

4 Relevant Lever 1 No. 

5 Relevant Lever Pin 1 No. 


7 Relevant Retainer sleeve 1 No. 



10 Relevant Upper Valve Case Lid 1 No. 

11 Relevant Lower Valve Case Lid 1 No. 


13 Relevant Back Head Bolt 2 Nos. 

1 No. 1 Bronze Metal 0.155 kg/HP 

2 C.I. Casting 

OR 

0.86 kg/HP 

Pig Iron 

1.12 kg/HP 

3 ERWSS Tube/ Rod Grade AISI 

304/ 316/ 431 

1 kg/HP 

4 Relevant Rubber/ Plastic Parts Net to Net 

C1519 Submerssible Water 

Motor of various Horse 

1 No. 1 Copper Rod/ Winding Wire or 


Powers (HP) 2 Stampings 

OR 

CRNGO Steel Sheet/ Coil/ Strips 

C1520 Auto Transformers 1 No. 1 CRGO steel laminations/ Sheets/ 

Coils/ Slits/ Cuts 

0.475 kg/HP 

1.47 kg/HP 

2.62 kg/HP 

2.11 kg. per KVA

(Variable Voltage) (b) 

Above 30 KVA I phase or 

90 KVA 3 phase and upto 

130 KVA I phase or 390 

KVA 3 phase 

C1521 Auto Transformers 

(Variable Voltage) (c) 

Above 130 KVA I phase 

or 390 3 phase 

C1522 Pneumatic Tool-Balancer 

with balance Capacity 

above 75 1b (34.1Kg) 

upto and including 210 

1b (95.5Kg) 


Digger/Utility Hammer 

(picks) Latch Retainer 

with Chuck 7/8"hex X 3 

1/4" (22.2mm X 82.6mm) 

without muffler. 

2 Copper winding wires/ Strips/ 



Roller 

C286 


5.0 Cub. Cm. per 

KVA 


5 Servo Motor Magnets for Motors Net to net 

1 kg 1 CRGO Steel laminations/ Sheets/ 

Coil/ Slits/ Cuts 




Rollers 



5.0 Cub.Cm. per 

KVA 


5 Servo Motor Magnets for Motors Net to net 

1 No. 1 Relevant Bearing Ball 1No. 

2 Relevant Gear Worm 1No 

3 Relevant Shaft-Worm Gear 1No. 

4 Relevant Retainer ball (thrust) 1No 

5 Relevant Race Retainer 1No 

6 Relevant Ball Race 1No. 

7 Relevant Worm 1No 

8 Relevant Ball Bearing 1No 

9 Relevant Guide Plate 1No. 

10 Relevant Stop Shield 1No. 

11 Relevant Housing Cable Drum 1No. 

12 Relevant Stop Assembly 1No. 

13 Relevant Hook Assembly Swivel 1No 

14 Relevant Housing Cover 1No. 

15 Relevant Cover 1No. 

16 Relevant Hub-main Spring 2No. 

17 Relevant Asembly main spring 

and retainer 

2No. 

18 Relevant Hook 1No. 

19 Relevant Cable 1No. 

20 Relevant Clamp Cable 1No. 

21 Relevant Separator Plate 1No. 


23 Relevant main spring anchor 1No. 

1 No. 1 Relevant Cylinder 1No. 

2 Relevant Sleeve 1No. 

3 Relevant Retainer Latch 1 No. 

4 Relevant Latch Bushing 1No. 


Assembly 

1No. 

6 Relevant Lever Chit 1No. 

7 Relevant Lever Pin 1No.


Digger/Utility Hammer 

(Picks) Latch Retainer 

with Chuck 7/8"hex X 3 

1/4" (22.2 mm X 82.6 

mm) with muffler. 

C1525 Pneumatic Tool-Balancer 

with balance capacity 

upto 75 1b (34.1Kg) 

8 Relevant Throttle Valve 1No. 

9 Relevant Retainer Latch Pin 1No. 

10 Relevant Valve 1No. 

11 Relevant Piston 1No 

12 Relevant Upper Valve case Lid 1No. 

13 Relevant Lower Valve case Lid 1No. 

14 Relevant Valve case 1No. 

15 Relevant Back Head Bolt 2Nos. 

1 No. 1 Relevant Cylinder 1No. 


3 Relevant Retiner Latch 1No. 

4 Relevant Latch Bushing. 1No. 


Assembly 

C287 

1No. 

6 Relevant Lever Chit 1No. 

7 Relevant Lever Pin 1No. 


9 Relevant Retainer Latch Pin 1No. 


11 Relevant Piston 1No. 

12 Relevant Upper Valve case Lid 1 No. 

13 Relevant Lower Valve case Lid 1No. 


15 Relevant Back head Bolt 2Nos. 

16 Relevant Hook Muffler complete 1 No. 

1No. 1 Relevant Main Spring Anchor 1No. 

2 Relevant Bearing Ball 1No. 

3 Relevant Drum Cable Assembly 1No. 

4 Relevant Gear Worm 1No. 

5 Relevant Shaft-Worm Gear 1No. 

6 Relevant Retainer Ball (Thrust) 1No. 

7 Relevant Race Retainer 1No. 

8 Relevant Ball race 1No. 

9 Relevant Worm 1No. 

10 Relevant ball Bearing 1No. 

11 Relevant Guide Plate 1No. 

12 Relevant Stop Shield 1No. 


14 Relevant Stop Assembly 1No. 

15 Relevant Hook Assembly Swivel 1No. 

16 Relevant Cover 2Nos. 

17 Relevant Hub-Main spring 1No. 

18 Relevant Assembly main spring 1No.

C1526 Pneumatic Tool- 

Reversible Drill with the 

speed of 350 R.P.M. and 

above upto including 750 

R.P.M. 

C288 

and retainer 

19 Relevant Hook 1No. 

20 Relevant Cable 1No. 

21 Relevant Clamp Cable 1No. 

22 Relevant Latch 1No. 

1No. 1 Relevant Air Handle Cap 1No. 


3 Relevant Live Air Handle Sleeve 1No. 

4 Relevant Governor Plunger 1No. 

5 Relevant Governor Stop Pin 1No. 

6 Relevant Governor Bushing 1No. 

7 Relevant Governor Weight 2Nos. 

8 Relevant Governor Body 1No. 

9 Relevant governor pin 1No. 

10 Relevant Reverse Sleeve 1No. 

11 Relevant Ball Bearing 2Nos. 

12 Relevant Dead Handle 1No. 

13 Relevant Universal Joint 1No. 

14 Relevant Round Plug 1No. 

15 Relevant Ball Bearing 1No. 

16 Relevant Liner 1No. 

17 Relevant Rotor 1No. 

18 Relevant Spindle Collar 1No. 

19 Relevant End Plate 1No. 

20 Relevant Spindle Gear 1No. 

21 Relevant Gear Case 1No. 

22 Relevant Collar 1No. 

23 Relevant Gear Pinion 1No. 

24 Relevant Ball Bearing 2Nos. 

25 Relevant Sleeve 1No 

26 Relevant Oil regulating Plug 1No. 

27 Relevant Dowel 1No. 

28 Relevant Muffler Cover 1No. 

29 Relevnt Feed Post 1No. 

30 Relevant Bearing 1No. 

31 Relevant Feed Sleeve Handle 1No. 

32 Relevant Transfer Plate 1No. 

33 Relevant Cylinder Cap 1No. 

34 Relevant spindle 1No. 

35 Relevant Feed Sleeve Centre 1No. 

36 Relevant Feed Sleeve 1No. 

37 Relevant Socket Shank 1No.

C1527 Pneumatic Tool-Non 


speed of 350 RPM and 

above upto and including 

750RPM. 



speed above 100RPM 

upto and including 

350RPM 

38 Relevant Dowel 3Nos. 


Assembly 

40 Relevant Live Air Handle Stem 

& Bush 

C289 

1No. 

1No. 

1No. 1 Relevant Cap 1No. 


3 Relevant Live Air Handle Sleeve 1No. 

4 Relevant Adaptor Flange 1No. 

5 Relevant Governor Bushing 1No. 

6 Relevant Governor Weight 2No. 


8 Relevnt Governor pin 1No. 

9 Relevnt Cylinder 1No. 





14 Relevant Throttle Roller 

Protector 

1No. 

15 Relevant Cylinder Liner 1No. 


17 Relevant Spindle Collar 1No. 

18 Relevant End plate 1No. 


20 Relevant Gear Case 1No. 


22 Relevant Gear Pinion 1No. 


24 Relevant Spindle 1No. 

25 Relevant Bearing 1No. 

26 Relevant Transfer plate 1No. 

27 Relevant Cylinder Cap 1No. 

28 Relevant Governor Stop Pin 1No. 

29 Relevant G Plunger 1No. 



32 Relevant Stem & Bushing 

Assembly 

1No. 

1No. 1 Relevant Centre 1No. 

2 Relevant Bushing 1No. 


4 Relevant Feed Post 1No. 

5 Relevant Rotor 1No.

6 Relevant Liner 1No. 

7 Relevant Rotor Housing 

Assembly 

C290 

1No. 

8 Relevant Plate 1No. 



11 Relevant Gear case Assembly 1No. 



14 Relevant Gear Stud 1No. 

15 Relevant ball Bearing 1No. 

16 Relevant Valve Cage 1No. 

17 Relevant Valve Pin 1No. 

18 Relevant Bearing Clamp Nut 1No. 

19 Relevant Governor Lever 1No. 


21 Relevant Governor Push Pin 1No. 


23 Relevant Nut 1No. 

24 Relevnt Governor Weight 2No. 

25 Relevant Muffler 1No. 

26 Relevant Transfer Plate 1No. 


28 Relevant Roller Race 1No. 

29 Relevant Roller Bearing 

Assembly 

1No. 

30 Relevant Retainer Washer 2 Nos. 

31 Relevant packing Nut 1 No. 

32 Relevant extractor pin 1 No. 

33 Relevant gear pinion 1 No. 

34 Relevant internal gear 1 No. 

35 Relevant ball bearing 2 No. 


37 Relevant dead handle 1No. 

38 Relevant live air handle stem 

assembly 

1 No. 


40 Relevant set screw 1 No. 

41 Relevant throttle valve 1 No. 

42 Relevant throttle cap 1 No. 

43 Relvant seat 1 No. 

44 Relevant universal joint 1 No. 


46 Relevant retainer sleeve 1No.



speed upto 100RPM 

47 Relevant protection sleeve 1 No. 

48 Relevant throttle valve plate 1 No. 


50 Relevant cylinder cap 1No. 

51 Relevant Feed sleeve handle 1No. 

52 Relevant screw 1No. 

53 Relevant Spindle 1 No. 

54 Relevant Bearing spacer 1 No. 

55 Relevant Dowel 2 Nos. 

1No. 1 Relevant centre 1No. 

2 Relevant Bushing 1 No. 

3 Relevant end plate 1No. 

4 Relevant Feed Post 1No. 


6 Relevant liner 1No. 

7 Relevant Rotor housing assembly 1No. 

8 Relevant Dead handle 1No. 

9 Relevant Plate 1No. 

10 Relevant Ball bearing 1No. 

11 Relevant throttle valve 1No. 

12 Relevant end plate 1No. 

13 Relevant Gear stud 1No. 

14 Relevant ball bearing 1No. 

15 Relevant valve cage 1No. 

16 Relevant valve pin 1No. 

17 Relevant bearing clamp nut 1No. 

18 Relevant Governor lever 1No. 

19 Relevant Governor push pin 1No. 


21 Relevant Nut 1No. 

22 Relevant muffler 1No. 

23 Relevant protection sleeve 1No. 

24 Relevant throttle cap 1No. 

25 Relevant roller bearing assembly 1No. 

26 Relevant packing nut 1No. 



29 Relevant transfer plate 1No. 

30 Relevant Cylinder cap 1No. 

31 Relevant Feed sleeve handle 1No. 

32 Relevant throttle valve 1No. 

33 Relevant screw 1No. 

C291

C1530 Movements for Electrical 

Measuring Instruments 

type: Moving iron, 

Moving Coil,Dynamo 

Meter,Bimetallic Reed 

Type,Namely Volt 

Meter,Ammeter,Frequen 

cy Meter,Watt 

Meter,Multimeters,Insula 

tion Testers,Maximum 

Demand Indicator,Power 

Factor Meter 

34 Relevant roller race 1No. 

35 Relevant retainer washer 2Nos. 

36 Relevant throttle valve plate 1No. 

37 Relevant seat 1No. 

38 Relevant collar 1No. 

39 Relevant sleeve 1No. 

40 Relevant Retainer sleeve 1No. 


42 Relevant Universal Joint 1No. 

43 Relevant Extractor pin 1No. 


45 Relevant Spindle 1No. 

46 Relevant Bearing spacer 1No. 

47 Relevant Internal gear 1No. 

48 Relevant gear pinion 1No. 

49 Relevant internal gear 1No. 

50 Relevant spindle gear 1No. 

51 Relevant Governor weight 4Nos. 

52 Relevant set screw 1No. 

53 Relevant Dowel 2Nos. 

54 Relevant Live air handle stem 

assembly 

C292 

1No. 

55 Relevant gear case assembly 1No. 


1No. 1 Plastic Moulding Powder: 50Gms. 

a) ABS Net +5% wastage 

b) Polycarbonate Net +5%wastage 

c) Polyphenylene Oxide Net +5%wastage 

d) Polyacetal Net +5% wastage 

e) Polycarbonate Net +5% wastage 

f) Polyamide Net +5% wastage 

g) Phenol Formaldehyde (Bakelite) 

Power and Moulded components 

thereof 


2 Silicon Oils 1gm 

3 Industrial Jewels with Screws 2Nos. 

4 Pivots 2Nos 

5 Hair Springs Net to net 

6 Super Enamelled Copper Wire Net to net 

7 Duralumin Rods Free Cutting 

Aluminium Rods, Capillary 

Tubes: 

Net + 2% Wastage 

a) Copper Bars/Strips Net +2% wastage 

b) Manganin Wire/Rods Net + 2% wastage

C1531 Pneumatic Tools-Hand 

Drill without Muffler 

with chuck 3/4" X 3 3/4" 

(19mm X 95.2mm) 

c) Eureka Wire/Rods Net +2% Wastage 

8 Magnet Centre Core Net to net 

9 Coil Former 1No. 

10 Mumetals Permaloy Strips & 

Components thereof 

C293 

Net to net 

11 Pointers/Pointer Arms Net to net 

12 Tant Bands/Ligaments Net to net 

13 Barllium 

Copper/Phospher/Bronze Strips 

Net +5% wstage 

(Qty. resctricted to 

20gms) 

14 Aluminium Die Castings Net to net 

15 Bimetallic Springs 2Nos. 

16 Springs Steel Strips Net to net 

17 Transistors, Capacitors, IC's & 

other electronic components not 

covered by other inputs entries 

Net to net 

18 Yoke 1No. 

19 Hybride Circuits 1No. 

20 Zener Diodes 2No. 

21 Yoke Holder 1No. 

22 Lower Boss/under Boss 1No. 

1No. 1 Relevant Inlet bushing 1No. 

2 Relevant Hose Tail 1No. 

3 Relevant Throttle Lever 1No. 

4 Relevnt Rear Valve Seat 1No. 

5 Relevant Front Valve Seat 1No. 


7 Relevnt Handle Bare 1No. 

8 Relevnt Throttle Valve Bushing 1No. 

9 Relevant Bolt 2No. 

10 Relevant Pawl 2No. 

11 Relevant Ratchet Ring 1No. 

12 Relevant Cylinder 1No. 


14 Relevant Cylinder Bushing 1No. 

15 Relevant Retainer Plate 1No. 

16 Relevant Chuck 1No. 

17 Relevant Chuck Sleeve 1No. 

18 Relevant Front Head 1No. 

19 Relevant Plunger Shifter 1No. 

20 Relevant Shifter Sleeve 1No. 

21 Relevant Retainer Sleeve 1No. 

C1532 Pnumatic Tools-Hand 1No. 1 Relevant Inlet Bushing 1No. 

Drill with Muffler and 2 Relevant Hose Tail 1No.

Shifter Sleeve with Chuck 

3/4" X 3 3/4" (19mm X 

95.2mm) 

C1533 Pneumatic Tool-Concrete 

Vibrator with 2 1/2 (inch) 

Head 

3 Relevant Throtle Lever 1No. 

4 Relevant Rear Valve Seat 1No. 

5 Relevant Front Valve Seat 1No. 


7 Relevant Handle Bare 1No. 

8 Relevant Throttle Valve Bushing 1No. 

9 Relevant Bolt 2No. 

10 Relevant Pawl 2Nos. 

11 Relevant Ratchet Ring 1No. 

12 Relevant cylinder 1No. 


14 Relevant Cylinder Bushing 1No. 

15 Relevant Retainer Sleeve 1No. 

16 Relevant Retainer plate 1No. 

17 Relevant Chuck 1No. 

18 Relevant Chuck Sleeve 1No. 

19 Relevant Front Head 1No. 


21 Relevant Plug Muffler 1No. 

22 Relevant Button-Rotation 

Release 

C294 

2Nos. 

23 Relevant Washer-Clamping 1No. 

24 Relevant Plunger Shifter 1No. 

25 Relevant Shifter Sleeve 1No. 

26 Relevant Depth Gauge 1No. 


1No. 1 Relevant Live Air Handle Cap 1No. 

2 Relevant Plug Handle 1No. 

3 Relevant Live Air Handle Cover 1No. 


5 Relevant Hose Nipple 2No. 

6 Relevant "Band-It" Clamp 2Nos. 

7 Relevant Intake Hose 1No. 

8 Relevant Shell & Nose Cap 1No. 

9 Relevant End Cap 1No. 

10 Relevant Eccentric Shaft Nut 

Assembly 

2Nos. 

11 Relevant Upper end plate 1No. 

12 Relevant Eccentric weight 1No. 

Relevant Eccentric shaft 1No. 

14 Relevant Lower end Plate 1No. 

15 Relevant Hose Clamp (band-It). 3Nos. 

16 Relevant Swivel Nipple 1No.

C1534 Pneumatic Tool 

C1535 Pneumatic Rock Drill 

17 Relevant Lock Wire 1No. 

18 Relevant Hose Clamp (Band-It). 2No. 

19 Relevant Hose Nipple 1No. 

20 Relevnt Exhaust Swivel Collar 1No. 

21 Relevant Live Air Hose 1No. 

22 Relevant Strainer 1No. 

23 Relevant Oiler Body 1No. 

24 Relevant Live Air Handle Stem 

& Bushing 

C295 

1No. 

25 Relevant Exhaust Hose 1No. 

1No. 1 Relevant Valve 1No. 

2 Relevant Retainer 1No. 


4 Relevant Spring 2Nos. 

5 Relevant Cylinder 1No. 

6 Relevant Clamp 1No. 


8 Relevant Muffler Plug 1No. 

9 Relevant Housing 1No. 

10 Relevant Pin 2Nos. 

11 Relevant Air Tube 1No. 

12 Relevant Bushing 2nos. 

13 Relevant Shaft 1no. 

14 Relevant Button 1No. 

15 Relevant Bush 1No. 

16 Relevant Bearing 2Nos. 


18 Relevant Casting 1 No. 

19 Relevant Chain Link Lead 1No. 


21 Relevant Handle 1No. 

1No. 1 Relevant Handle Bracket (made 

of Steel Gr. SAE 8620) 

2 Relevant Handle Bolt (made of 

Steel Gr. EN 9) 

3 Relevant Air Inlet Swivel (made 

of Steel Gr. EN 24) 

4 Relevant Air Inlet Swivel Nut 

(made of Steel Gr. SAE 8620) 

5 Relevant blower Valve (made of 

steel Gr. SAE 8620) 

6 Relevant Thru Bolt (made of 

steel Gr. EN 24) 

7 Relevant Front Head (made of 

Steel Gr. SAE 8620) 

8 Relevant Retainer (made of Steel 

Gr. SAE 8620) 

1No. 

1No. 

1No. 

1No. 

1No. 

2Nos. 

1No. 

1No.


Riverting Cutter (Buster) 

8" to 11" Cylinder 

9 Relevant Ratainer Trunnion 


10 Relevant Cylinder (made of Steel 

Gr. SAE 8620) 

11 Relevnt Back Head (made of 


12 Relevant Throttle Valve Handle 


13 Relevant Ratchet Ring (made of 


14 Relevant Valve Case (made of 


15 Relevant Blower Valve Bushing 


16 Relevant Rifle Bar Nut Bronze 


17 Relevant Piston (made of Steel 

Gr. EN 355) 

18 Relevant Bushing Cylinder 


19 Relevant Air Tube (made of Steel 

Gr. SAE 8620) 

20 RelevantChuck Rotation Nut 

(made of Steel Brass) 

21 Relevant Chuck Sleeve (made of 


22 Relevant Chuck (made of Steel 

Gr. SAE 8620) 

23 Relevant Rifle Bar (made of 


24 Relevant Valve(made of Steel 

Gr. SAE 8620) 

25 Relevant Valve Guide Bushing 


26 RElevant Bushing Water Valve 

(made of Steel Brass ) 

27 Relevnt Throttle Valve (Made of 

steel Gr. SAE 8620) 

1No. 1 Relevant Throttle Valve (made of 


2 Relevant Throttle Tube (made of 

Steel Gr. ENIA) 

3 Relevant Throttle Lever (made of 


4 Relevant Valve Case Lid (made 


5 Relevant Valve (made of Steel 

Gr. EN24) 

6 Relevant Valve Case (made of 


7 Relevant Handle (made of Steel 

EN8) 

8 Relevant Spring Clip (Lock 

Collar) (Made of Steel Gr. EN8) 

C296 

2Nos. 

1No. 

1No. 

1No. 

1No. 

1No. 

1No. 

1No. 

1No. 

1No. 

1No. 

1No. 

1No. 

1No. 

1No. 

1No. 

1No. 

1No. 

1No. 

1No. 

1No. 

1No. 

1No. 

1No. 

1No. 

1no. 

1No. 

9 Relevant Lock Collar (made of 

Steel Gr. EN8) 

1No. 

10 Relevant Cylinder (made of Steel 1No.

C1537 Regulators with rotating 

outlet for LPG Cylinder 

C1538 Non Alloy Steel Forged 

(Mechined) Hammers 

upto 10Kg Pc. Wt. 

Without Handle or with 

Handle made of 

Steel/Wood/Rubber 

Gripped Steel Pipe. 

1 No. 

(227gms) 

C297 

Gr. EN24) 

11 Relevant Piston (made of Steel 

Gr. T118 CR2) 

12 Relevant Lower Sleeve (made of 

Steel Gr. EN31) 

13 Relevant Upper Sleeve (made of 


14 Relevant Retainer Sleeve (made 

of Steel Gr. EN 24) 

1No. 

1No. 

1No. 

1No. 

15 Relevnt Exhaust Deflector (made 1No. 


1 Zinc 245gms) 

1Kg 1 Carbon Steel/Non Alloy 

Steel/bar/Rods/Billets 


Oil/Primer/Paints 

3 Consumables:- Refractory 

material, Die Steel, die 

Block,Cutting Tool,Cutters 

Sawing blades, including 

Bimetallics bandsaw blades steel 

shots, fuel oil, heat treatment 

chemicals quenching oil & 

lubricants. 

4 a) PIPE + RUBBER +NICKLE 




FOB value of export 


FOB value of the 

export. 

(i)Pipe(for handle) ERW Cold 

Drawn Steel Tubes pipe of 

Relevant Std. 

0.280Kg 

ii) Nickle (for Electroplating for 

(i) 

0.012Kg 

iii) Rubber (for Grip) Natural 

Rubber 

OR 

0.130Kg 

b) Wood (for Handle) 0.250Kg 

Import item at 4(a) (I) (ii) & (iii) and (b) will be allowed with reference to the nature of the product to be 

exported. 

C1539 Bearing/Gear Puller 1MT. 1 Non Alloy Steel Plate 1.32MT 

made of Non Alloy Steel 

Plate/Round with chrome 

plated legs. 

2 

3 

Non Alloy Steel Round 

Nickle 

0.367MT 

15.5Kg 

C1540 Handle Bar Switch 

LH/RH : a) with/without 

grip (b) with/without 

lever (c)with/without 

cone 

1Kg 1 Terminal Net to net 

2 Coupler Net to net 

3 Nylone Grannules 1.05Kg/Kg content in 


4 Phenol Formaldehyde 1.05Kg/Kg content in 


5 Polyester Grannules 1.05Kg/Kg content in 


6 ABS Grannules 1.05Kg/Kg content in 


7 PVC Grannules 1.05Kg/Kg content in 


8 Copper Wire Bars/Copper Sheet. 1.02Kg/Kg content in 

the export product

C1541 Grip for Handle Bar 

with/without Cone 


Group 

C1543 Shifted to Miscellaneous 

Group 

C1544 Aluminium Drying 

Hanger 

C1545 Micanite Insulator Sheets 

containing 170gms, 

Resin. 

C1546 Carbon Steel/Alloy 

Steel(including Stainless 

Steel). Forged Flanges. 

Note:- Furnace Oil shall be allowed only for Hot Forgings 

C1547 Outdoor/Indoor Vaccum 

Circuit Breaker with or 

without Motor operated 

mechanism and 

supporting structure (of 

different ratings and 

weight of supporting 

structure) 

9 Brass Sheet/Strips 1.05Kg/Kg content in 


10 Spring Steel/Coil/Strip 1.05Kg/Kg content in 


11 Mild Steel Square/Rods 1.05Kg/Kg content in 


12 Aluminium Alloy Ingots. 1.05Kg/Kg content in 


1Kg 1 PVC Grannules 1.05Kg/Kg content in 


1Kg 1 Relevant Aluminium Alloy 

Ingots 

C298 



2 Nylone Cord -66 1.01Kg/Kg content in 


3 CRCA Sheet 1.075Kg/Kg content 


1Kg 1 Resin (Epoxy/Polyester). 187gms. 

2 Teflon (PTFE) coated glass cloth 

sheets/roll 

1MT 1 Relevant Forging Quality Carbon 

Steel/ Alloy Steel/ Stainless Steel 

Rounds/ Billets/ Bars/ Rods 

2 Rust Preventing Oil/Primer/Paint, 

Die Steel/Die Blocks, Cutting 

Tools, Sawing blades, Metallic 

Bandsaw blades, Steel Shots, 

Refractory material, Heat 

Treatment Chemicls, Quenching 

Oil and Lubricants 

3 Deleted 



product 

1.65MT 


value 

1No. 1 Vaccum interrupter of relevant 

rating 

OR 

RAW MATERIAL 

Net to net 

1) Copper Bar 1.01 kg/kg content in 

the Vaccum 

Interrupter 

2) OFHC Bar 1.01 kg/kg content in 

the Vaccum 

Interrupter 

3) SS Strips/ Plate 1.05 kg/kg content in 

the Vaccum 

Interrupter 

4) Bismuth Powder/ Chrome 

Powder 

1.03 kg/kg Spherical 

OFHC Cu powder 

2 Aluminium Ingot 1.01 kg/kg content in 


3 CR/HR Non-Alloy Steel 

Sheet/Coil 



4 Copper Wire Bar 1.01Kg/Kg content in 

the export product

C1548 Outdoor/Indoor Vaccum 

Circuit Breaker with 

Motor operated 

mechanism and 

5 Berrylium Copper Strip 1.01Kg/Kg content in 


C299 

COMPONENTS 

1 Forged ZLR Ring 1 

2 Bellow Closure Plate 1 

3 Convolution 1 

4 Pressed End Plate 1 

5 End Plate 1 

6 Bellow Assembly 1 

7 Stud Plate 1 

8 Bearing Retainer Plate Net to net 

9 Bearing Net to net 

10 Gauze Tilter Net to net 

11 Pump Port Black 1 

12 Restrain Band 1 

13 Pump Port 1 

14 End Plate Assy. 1 

15 Pump Port Braze Ring 1 

16 MC Stub 1 

17 FC Stub 1 

18 Glass Ceramic Envelope 2 

19 End Shield 2 

20 Center Shield 2 

21 Getter 1 

22 ZLR Contact Tips 2 

23 MC Base 1 

24 FC Base 1 

25 Incusil Pallet 1 

26 End Plate 2 

27 Braze Washer 4 

28 CLR Cup 2 

29 Pumped Assembly 1 

30 Bearing Liner 1 

31 Mounting Stud 3 

32 Lable 1 

33 Restraining Band 6 

34 Plain Washer 3 

35 Spring Washer 3 

36 HEX Nut 3 

1No. 1 Vacuum interrupter of relevant 

rating 

Net to net 

2 Aluminium Ingot 1.01Kg/Kg content in 


supporting structure (of 3 CR/HR Non Alloy Steel 1.03Kg/Kg content in

different ratings and 

weight of supporting 

structure) 

C1549 Pressure Cooker made of 

Aluminium Body & 

Stainless Steel (AISI 304 

Grade) Lid 

C1550 Carbon Steel (MS) 

Fabricated Tower 

Packings 


Group 

C1552 Deleted 

C1553 Battery type NCSPB 

25150 (Nickel) Cadmium 

Batteries) 24Vols. 25AH 

C1554 Shock Absorbers for Two 

wheelers/three wheelers 

C1555 Strut with Spring 

Assembly for Van 

C1556 Shock Absorbers (Gas 

filled) for Multi Utility 

vehicle (MUV) 

C1557 Shock Absorbers for 

Cars/Jeep-conventional 

C1558 Circuit Breakers upto & 

including 200KVA. 

C300 

Sheet/Coil the export product 

4 Copper Wire Bar 1.01Kg/Kg content in 


5 Berrylium copper Strip 1.01Kg/Kg content in 


1Kg 1 Aluminium Circles, Commercial 

Grade 

2 Non Magnetic Stainless Steel 

sheets/Coils AISI 304 Grade 

1/1.25mm Thick 

1MT 1 CRCA Carbon Steel (MS) 

Sheets/Strips. 





1.02 MT per MT of 


1No. 1 Nickel fibremat fibrex 

OR 

27.05Sq.ft. 

1 Nickel Powder 3.12Kgs. 

2 Nylone Moulding granules 3.70Kgs. 

3 Non woven Separators 12.40 Sq./Mtrs. 

4 Nickel Powder Type 

255/287/210 

2.64Kgs. 

5 Celegard (R) 3400 Flat Sheet/ 

Film 

6.20Sq. Mtrs. 

6 Battery Connectors 1No . 

7 Metregrip 303 LV epoxy 

adhesive acticator 

0.52 Ltrs 

8 Metrigrip 303LV epoxy 

Adhesive base 

0.52Ltrs. 

1No. 1 Bump Stop (Hexagon RSI) 1No. 

1No 1 Reverse DU Bush 1No 

2 Rod Seal 20MM 1No. 

3 Bushing 20MM 1No. 

1No. 1 Piston Rod Seal 1No. 

1No. 1 M.L. Seal 1No. 

1No. 1 Copper Wire Rods/Cathodes 1.01Kg/Kg content in 


2 Copper Strips 1Kg/Kg content in 


3 Plain Copper stranded Flex 

Round (Braided Copper) 

1Kg/Kg content in 


4 Aluminium Sheets/Ingots 1.01Kg/Kg content in 


5 CRCA Sheets. 1.01Kg/Kg content in 


6 Thermostat Metals Net to net 

7 Electrical Contact Net to net

C1559 Shifted to Electronics 

Group 


Group 


Group 


Group 


Group 


Group 


Group 


Group 


Group 


Group 


Group 


Group 


Group 


Group 


Group 

C1574 Bicycle Tube Valve 

mainly made of Brass 

C1575 Bronze ingots of different 

allowing percentage 

(containing Tin, Copper 

and Nickle). 

8 

Buttons/Square Buttons/Round 

Buttons. 

Fastners/Tab Nuts Net to net. 

9 Extension Springs. Net to net 

10 Secondary Latch Spring Net to net 

11 Contact Arm Springs Net to net 

1Kg 1 Brass Scrap 1.20Kg/Kg content of 

Brass in the export 

product. 

1Kg. 1 Tin Ingots 1.02Kg/Kg content in 


2 Copper Scrap. 1.06Kg/Kg content in 


3 Nickle 1.02Kg/Kg content in 


4 Phosphor Copper 0.0102Kg. 

C1576 Tungsten Filament for 1Kg 1 Tungsten Wire 1.2Kg 

GLS Lamps- 150 WCC. 2 Molybdeneum Wire 0.85Kg 

C1577 Doctor Blades (for 1Kg 1 Hardened & Tempered Carbon 1.15Kg 

C301

printing machines) 

C1578 Fire Clay Bricks/Shapes 

C1579 Iron-Nickel Alloy(s) Wire 

/Strip of different 

composition 

1MT 1 

Steel Strips (In Coils)/ Stainless 

Steel (Martensitic Grade) Strips 

(in Coils) 

Calcined Clay 0.752MT 

2 Non-Plastic Clay 0.220MT 

3 Ball Clay 0.055MT 

4 SRM-30 (Calcined Alumina) 0.035MT 

1 Kg 1 Nickel Pellets and /or Cathodes 1.03Kg/Kg content in 


C1580 Nickel Chromium 

Alloy(s) Wire /Strip of 

different composition 2 Chromium Metal Flake and/or 

Lumps. 

1Kg 1 Nickel Pellets and /or Cathodes. 1.03Kg/Kg of Nickel 


C1581 Nickel-Copper Alloy(s) 

wire /Strip of different 

composition 2 Copper Ingot and /or Copper 

Cathodes 

C1582 High Speed Steel 

broaches (cutting tolls), 


Grade 

C1583 Spring Casing for Pipe 

Line support 

C302 



1Kg 1 Nickel Pellets and/or Cathodes 1.03Kg/Kg of Nickel 


1Kg 1 Relevant High Speed Steel 

(Cobalt/Non-Cobalt grade) 

1.03Kg/Kg of Copper 




1Kg 1 M S Plate/Sheet 1.15Kg/Kg content in 


Note: If the export product is galvanized zinc may be allowed as 4% of the weight of parts to be 

galvanised. 

C1584 Staples/Staples in Strips 

C1585 CNC/NC Hydraulic 

Shearing Machine 

C1586 Iron Alloy Powder made 

from Sponge Iron of 

1Kg 1 Galvanized Steel Wire 1mm to 

2.1mm dia 

2 Synthetic Glue 0.026 Kg 

1No. 1 Geared Motor Net to net 

2 Servo Motor Net to net 

3 Hydraulic Pump Net to net 

4 Controller for Shear Net to net 

5 Hydraulic Accumulator Net to net 

6 Encoder Net to net 

7 Linear Motion bearing Net to net 

8 Servo Amplifier Net to net 

9 Ball Screw Net to net 

10 Nuts for Ball Screws Net to net 

11 Spherical Bearing Net to net 

12 Thread Spindle Net to net 

13 Timing Belt Net to net 

14 Bush PAP 50/40 Net to net 

15 Timing Pulley Net to net 

16 Hydraulic Seals Net to net 

1Kg 1 High Grade Raw Ground Sponge 

Iron 





different composition. 2 Copper Powder 1Kg/Kg content in

C1587 CNC Hydraulic Press 

Brake 

C1588 Deleted 

C1589 Duel Gauge Prestresed 

Concrete sleeper (size 

2750mm X 250mm Based 

Width X 255mm Height) 


Group 

C1591 Aerosol Valve 

C303 


3 Carbon Ultra Fine 1Kg/Kg content in 


4 Zinc Sterate 1Kg/Kg content in 


5 Nickel Powder 1Kg/Kg content in 


1No. 1 Geared Motor Net to net 

1No. 

(378Kg) 

2 Servo Motor Net to net 

3 Hydraulic Pump Net to net 

4 Director Control Valve Net to net 

5 Prop. Director Control Valve Net to net 

6 Prop. Pressure Control Valve Net to net 

7 Pressure Relief Valve Net to net 

8 Cartridge Valve Net to net 

9 Spherical Bearing Net to net 

10 Linear Motion Bearing Net to net 

11 Linear Motion Guides Net to net 

12 Hydraulic Seals Net to net 

13 Guide Shaft Bearing Net to net 

14 HP Line Filter Net to net 

15 Timing Belt Net to net 

16 Timing Pulley Net to net 

17 Linear Scales Net to net 

18 Servo Amplifier Net to net 

19 CNC Press Brake Controller Net to net 

20 Axis Control Card Net to net 

21 Safety PLC Net to net 

22 Expanded Module Net to net 

23 Two Hand Control Box Net to net 

24 Nuts of Ball Screws Net to net 

25 Ball Screws Net to net 

26 Guide Shaft Net to net 

27 Special Elec. Connector Net to net 

28 Encoder Net to net 

1 High Tensile Carbon Steel Wire 12.2Kg 

2 Relevant Portland Cement 68.5Kg 

3 Inserts 6 Nos. 

1 

1No. 1 Actuator/Spray Cap 1No. 

2 Body 1 No.

C1592 Disc Wheel Flat Base 

Rim 

C1593 Vaccum Drum Cane Mud 

Filters 

C1594 Automobile Locks other 

than Ignition locks 

3 Stem 1 No. 

4 Inner Gasket 1 No. 

5 Outer Gasket 1No. 

6 Mounting Cup 1No. 

7 Polyethylene Grannules 1.05Kg/Kg content in 


1No. 1 Flanges 1No. 

2 Lock Ring 1No. 

3 Valve Guard 2No. 

4 Rubber Sealing Ring 1No. 

5 Locking Clip 1 No. 

6 Safety Pin 1No. 

7 Lock Pin 1No. 

1No. 1 S.S. 304 Plate/Coil (Thickness 

from 5mm to 16mm) 

C304 

1.20MT/MT content 


2 Relevant Variable Speed Motor 1No. (net to net) 

3 Relevant fixed Gear Motor 1 No. (net to net) 

4 Relevant ERW Pipes 0.10MT 

5 SS 304 Electrodes 20Kg per MT of 

Steel weight in export 

product 

1No. 1 Zinc Ingot 1.10Kg/Kg content in 


2 Brass sheet 1.15Kg/Kg content in 


3 CRCA Sheets/coils 1.20Kg/Kg content in 


4 Stainless Steel Sheet/Coil 304 

Grade 



5 Spring Steel Sheet 1.20Kg/Kg content in 


6 Polyacetal 1.05Kg/Kg content in 


7 Lock Pin 2 Nos. 

8 Guide Lock Plate 2 Nos. 

9 Lock Plates 18 Nos. (Net to net) 

10 Key 2 Nos. 

11 Cap 2 Nos. 

12 Key Tag 1 Nos. 

13 Gasket 2 Nos. 

Note: The Components shal be allowed on net to net basis which the firm shall account for in the export 

product. 

C1595 Folding Machine for 

Sheetmetal (Manual) 

1No. 

(1254Kgs. 

2020 X 

2mm) 

1 Non Alloy Steel plates/Flats 845Kg 

2 Non Alloy Steel 

Square/Rectangle ERW Tube 

93Kg 

3 Non Alloy Steel Angles 107Kg

C1596 Rolled Aluminium 

Colour coated Plates, 

Sheets, Strips including 

Corrugated Aluminium 

Sheets/Strips 

4 Non Alloy Steel Bright Bar 2.74Kg 

1MT 1 Aluminium Ingots Commercial 

grade 

C305 

1.05MT/Mt content 


2 Relevant Paints. 1% of FOB Value 

C1597 High Speed Stel Wires 1Kg 1 High Speed Steel Bar/Wire 

Rods/Rods of relevant grade 

1.03Kg 

C1598 Machined Components 

made of brass not 


1Kg 1 Brass Scrap 1.075Kg 

C1599 Industrial Valve fitted 1 No. 1 Relevant Actuator 1No. 

with Actuator 2 Relevant Valve 1No. 

C1600 Sanitary Fittings made of 1Kg 

Nickle Bronze 

1 Nickle Bronze Ingot 1.05Kg 

Note:- Composition of imported input should conform with that of the export product. 

C1601 Complete Rear Lamp 

Assembly for 

Automobiles 

1No. 1 CRCA Sheet/Strip 1.05 kg/kg content in 


2 Polymethile Metaacrylate 1.05 kg/kg content in 


3 Polymethile Metaacrylate 

(PMMA) Natural 



4 Polycarbonate 1.05 kg/kg content in 


5 Poly propylene Talc 1.05 kg/kg content in 


6 ABS 1.05 kg/kg content in 


7 Spring Net to net 

8 Cut Gasket Net to net 

9 Foam Seal Gasket Net to net 

10 Gasket Net to net 

11 Fixing Screw Net to net 

C1602 Lense for Rear Lamp 

Assembly for 

Automobiles 2 Polymethile Metacrylate 

(PMMA) Natural 


Group 


Group 

C1605 Double Parabolic 

Louvres (Aluminium 

Louvres for Light 

Reflection) 

C1606 PFA or FEP or PTFE or 

PVDF resin lined Ball 

Valves with PTFE 

components like seals, 

seats, packing etc. in 

assorted size/ Weight 

1No. 1 Polymethile Metaacrylate 1.05 kg/kg content in 




1Kg 1 Pre-Anodised Aluminium Coils 1.01 kg/kg content in 


1Kg 1 PFA or FEP or PTFE or PVDF 

Resin 


the export product

C1607 Epoxy components of 

different voltge rating 

and specification. 

C1608 Diesel Generating Set 

(specification to be 

indicated by the 

applicant) 

C1609 1200mm Slat Chain 

Conveyor 

C1610 Diapharagm Actutators 

C1611 Aluminium Rod/Bar and 

other extruded products. 

C1612 Hydraulic Jack Weight 

22Kgs. Model No. 

HJ01021 

C1613 Tungsten Carbide Inserts 

1Kg 1 Epoxy resin Epotec/CY225/ 

CW229 or equivalent grade 

2 Hardner HY 925/ Hexa Hydro 

Phthalic Anhydride (HHPA)/ 

equivalent grade/HW229 

3 Electrolytic Copper Wire Bar/ 

Flats/ Rods/ Bus bars 

4 Mould Relese Agent QZ- 

13/QZ24 

5 Semi-conducting Varnish- 

800/8001 

1No. 1 Relevant Diesel Engine 1 No. 

2 Relevant Alternator 1 No. 

C306 







CIF value restricted 




3 Relevant Key Start Control 

Module 

1 No. 

1No. 1 152.4mm pitch elevator chain On net to net basis 

2 Segmented Sprocket (head) 

152.4mm Pitch 630 PCD 


Segmented Sprocket (Tail) 

125mm pitch 755PCD 


1No. 1 Diaphragm-Nitrile Rubber Net to net 

2 Springs-Alloy Spring Steel Net to net 

3 Fastners-SS 304/SS 316 Net to net 

4 Bushes-Glacier MB 4530 DU Net to net 

5 Seals-Barker Rod Seal Net to net 

6 Adaptor-Swagelok SS 12-RB-4 Net to net 

7 Vent Protecor Swagelok SS- 

MD2 

Net to net 

1Kg 1 Aluminium Billet 1.01Kg 

1No. 1 Aluminium Ingots 8.9Kg 

2 Aluminium Bronze 0.61KG 

3 Aluminium Rod 0.40Kg 

4 Square/Round/Rod(Carbon 

Steel) 

9.8KG 

5 Relevant Socket Lever 1No. 

6 CR/HR/Steel Sheet/Coil/Strip 0.55Kg. 

7 Cold Drawn Seamless Tubes EN 

24 

1.44 Kg 

8 MS Squares Hexagon Rods 0.25 Kg 

9 Relevant Oil Seals made of 

Synthetic Rubber 

13 No. 

10 High Tensile Bolts/Nuts 10 Nos. 

11 Relevant Spring 4 Nos. 

12 Relevant Tube fittings Assembly 4 Nos. 

1Kg 1 Tungsten Carbide Mixed Powder 

OR 

1 a) Tungsten Carbide Powder 99.5% 

min. purity 





b) Tantalum Carbide 1.05 Kg/Kg content

C1614 Typewriter (Manual) 

with Metal Casing 

C1615 Screw/Gear 

Pump/Pumpset 

c) Tantalum Niobium Carbide 

70/30% 

C307 




d) Cobalt Metal 98.8% Min. 1.05 Kg/Kg content 


e) Tungsten Titanium Carbide 

50/50% 



2 Packing Material As per packing 

policy. 

3 Tantalum Niobium carbide 

70/30% 



4 Cobalt Metal 98.8%min 1.05 kg/kg content in 


5 Tungsten Titanium Carbide 

50/50% 



6 Packing Material As per packing 

policy. 

7 Consumables CIF value restricted 


value 

8 Grinding Wheel for edge honing 

and Ultra Graphite Coat 

1000Nos. 1 Cold Rolled Mild Steel 

Strips/coils/Sheets. 


FOB value 

7250 Kgs. 

2 Manganese Chrome Steel Strips 702 Kgs. 

3 Spring Steel Strips 150 Kgs. 

4 Mild Steel Bars/Wire 920 Kgs. 

5 Stainless Steel Sheet 160 Kgs. 

6 Aluminium Alloy ( LM-6) 4700 Kgs. 

7 Zinc Ingot 500 Kgs. 

8 ABS Granules 1.05 Kg/Kg content 


9 Type Sets. Net +1% wastage 

1No. 1 Relevant Screws OR Relevant 

Gears. 

1 Set. 

2 Relevant Electric Motor OR 

Relevant Diesel Engine 

1 No. 

3 Relevant Mechanical Seal 1 No. 

4 Relevant Pressure Relief Valve 1 No. 

5 Relevant Ball Bearing with SKF 

No. 

1 No. 

6 Relevant Coupling 1 No. 

7 Relevant Pump Casing Insert 1 No. 

Item No. 2 i.e. Electric Motor/Diesel Engine shall be allowed only when complete set is exported. All inputs 

imported shall be accounted for in export product 

C1616 Asbestosfree Brakelinings 

without Brass Chips & 

1Kg 1 Phenol Formaldehyde Resin 

(Powder Phenol Resin) 

0.185Kg 

Nitrile Rubber 2 Fibreglass Chopped Strands 0.076Kg 

C1617 Rechargeable Flash Light 

3.6 Volt AA Size NiCd 

1No. 1 Ni-cd Rechargeable Battery 1.2 

Volts AA Size 

Battery 2 ABS Granules 1.05Kg/Kg content in 


3Nos.


2.4 Volt AA Size NiCd 

Battery 


2.4 Volt Button Type Ni- 

Cd Battery 


2.4 Volt Button Type Ni- 

Cd Battery with twin 

Bulb 

C1621 Fibre Bed Mist 

Eliminator (Candle 

Filter) having Glass Fibre 

Filter Segments 

3 Pre-focused Bulbs 1No. 

4 Transformer 1No. 

1No. 1 Ni-cd Rechargeable Battery 1.2 

Volts AA Size. 

C308 

2 Nos. 

2 ABS Granules 1.05Kg/Kg content in 


3 Pre-focused Bulbs. 1No. 

4 Transformer 1No. 

1No. 1 Ni-cd rechargeable battery 2.4 

Volts 

1No. 



3 Pre-focused Bulbs. 1No. 

4 Capacitor 0.33 Mfd. 1No. 

5 Capacitor 10Mfd. 2 Nos. 

1No. 1 Ni-cd Rechargeable battery 2.4 

Volt 

1No. 



3 Pre-focused Bulbs. 2Nos. 

4 Capacitor 0.33Mfd. 1 No. 

5 Switch Single pole 3 way 1No. 

1No. 1 Filter Segments in Glass Fibre 

(Glass Wool) of relevant size 

C1622 Contacts (connector 

parts) Made of Phosphor 

Bronze 

1Kg 1 Phosphor Bronze Strips CuSn5 1.62Kg 

C1623 Ball Screw Actuator 1No. 1 Ball Screw with Nut. 1No. 

C1624 Cementing 

Float/Duplex/Differential 

shoes of different sizes 

C1625 Stage Cementing Collars 

1) For 5.1/2" stage 

cementing collar 25.5/8" 

long 

2) For 7" stage cementing 

collar 25.1/2"long with 

outer sleeve 10.1/4" long 

3) For 9.5/8" Stage 

cementing collar 25.5/8" 

long with outer sleeve 

10.1/4" long 

4) For 13.3/8" Stage 

cementing collar 34" long 

with outer sleeve 12.375" 

long 

1No. 1 Seamless casing pipes of relevant 

API Grade of Similar Dia. 

1No. For Export item No. 1 ) 

1. Seamless casing pipe in 

required API Grade 6.062"OD X 

4.710" ID 

In height of 1Ft. 

(305mm) OR in 

Multiple of 2 Ft. 

(610mm) Segments 

depending upon the 

Ht. of the export 

product. 

1 No. of actual length 

of export product 

+1/2" extra. 

26.1/8" long 

For Export item No. 2) 

(1) Seamless casing pipe in 26"long 

required API grade 7.656" OD X 

7.135" ID 

(2) Seamless casing pipe in 10.3/4" long 

required API grade 8.250"OD X 

7.135" ID 

For export item No. 3) 

(1) Seamless casing pipe in 26.1/8"long 


8.998"ID 

(2) Seamless casing pipe in 10.3/4" long 


9.720" ID 

For export item No. 4)

C1626 Galvanised High Carbon 

Steel Wire Ropes with 

Polypropelene Core 

C1627 Copper based alloy ingots 

of different grade. 

C1628 Cementing Float/Duplex 

Differential Collar of 

different sizes 

C1629 Single Stage regular with 

rotating outlet for LPG 

C1630 Galvanised Steel Flexible 

Tube/Pipe (Conduit) with 

PVC coating 

C1631 Steel Moulds of size 5150 

mm long X 1181mm 

Wide X 2.25 mm TK for 

manufacturing A.C. 

Corrugated Sheets. 


Accessories/ components 

made of Phosphors 

(1) Seamless casing pipe in 

required API grade 14.375" OD 

X 12.343"ID 

34.1/2" long 

(2) Seamless casing pipe in 

required API grade 14.906" OD 

X 13.500"ID 

12.875" long 

1MT 1 High Carbon Steel Wire Rods 1.02MT/MT content 


2 Zinc 4% of the net weight 

of steel wire rods 

3 Polypropelene Granules 1.05Mt/Mt content in 


1Kg 1 Copper Scrap 

C309 

OR 

Copper Cathodes 



OR 



2 Tin Ingots 1.02 Kg/Kg content 


3 Nickel 

Shots/Pellets/Ingots/Cathodes 

4 Lead Scrap 

OR 

Lead Ingots 

5 Zinc Scrap 

OR 

Zinc Ingot. 

6 Aluminium Scrap 

OR 

Aluminium ingot 





OR 





OR 





OR 



7 Manganese (Elemental Form) 1.02 Kg/Kg content 


8 Phosphor Copper 0.01 Kg. 

1No. 1 Seamless casing pipes or relevant 

API Grade of similar dia 

1 No. 

(260gms) 

1 Zinc Alloy A 14/AL 4 Cu 1 230gms. 

1 Kg 1 Low Carbon M.S. Defective 

Coils/sheets 

1 No. of actual length 

of export product 

+1/2" extra 



2 Zinc 0.025 Kg content in 


3 PVC Compound (Granules) 1.05 kg/ kg content in 


1 Kg 1 HR Non Alloy Steel Sheet/Coil 1.05 Kg/Kg content 


1 Kg 1 Phosphors Bronzes 




Bronze 

C1633 Electrographatised 

Carbon Block 

1 Kg 1 Pre-graphatised Carbon Block 1.02 Kg. 

C1634 Metallic Graphite Blocks 1 Kg 1 Copper Powder 0.64 Kg 

containing 62% Copper 2 Natural Graphite Lumps 0.40 Kg 

C1635 PVC Insulated 

Unarmoured control 

purpose copper cable 

upto 1.1KV Size 

36/0.23mm (1.5Sq.mm) X 

3 Core 

C1636 Burning Lances (Nonalloy 

Steel pipes fitted 

1000 Mtrs. 1 Copper Cathode/CC Rod/Wire 

Bars Ingots/ Copper Wire Rod 

C310 

42.315 Kg 

2 PVC Resin 75.276 Kg 

3 Pthalate Plasticize (DOP) 37.638 Kg 

4 Fillers (Calcium 


) 

1 Kg 1 CR Non-Alloy Steel Coils 

(Prime/Seconds) 

with alloy steel wires) 2 Alloy Steel Wire of Relevant 

Grade. 

C1637 Spinning Card Cans 

12.546 Kg 





1 No. 1 HDPE granules 1.05 Kg/Kg content 


2 G.P. Coils/Sheet 1.05 Kg/Kg content 


3 Spring Steel Wire 1.02 Kg/Kg content 


4 CRCA Coil/Sheet. 1.05 Kg/Kg content 


5 Caster Wheels. 

OR Relevant Bearing 

3 Nos. (net to net) 

3 Nos. (net to net 

basis) 

Note:- If the party exports only Caster Wheels, then relevant bearing may be allowed on net to net basis as 

per item No. 5 above i.e. 1 No. per Caster Wheel. 

C1638 Diffuser and parts 

thereof namely Flower, 

Core, Core Assembly and 

outer frame in various 

sizes manufactured 

without joints from 

Aluminium Sheets, (other 

than those manufactured 

from Aluminium 

Section/extrusions) 

C1639 Copper Conductor 

covered with Polyester 

film & Glass fibre Yarn 

C1640 Fibreglass/ Synthetic 

Filter Bags of different 

sizes with Snap Ring 

made of Stainless Steel 

AISI 301 and other 

1 Kg 1 Aluminium Ingot 

OR 

Rolled Aluminium Sheet in coil 

Form 

1.15 kg 

OR 

1.05 kg 

2 Aluminium Scrap 1.20 kg 

1 Kg 1 Copper Wire Rod/Cathode 1.01Kg/Kg content in 


2 Glass Fibre Yarn 1.01Kg/Kg content in 


3 Polyester film 1.01Kg/Kg content in 


4 Nomex Aramid Paper 1.01 kg/kg content in 


1 No. 1 Fibreglass/ Synthetic Filter Cloth 

of relevant GSM 

2 Fiberglass/ Synthetic Sewing 

Thread 

1.02 Sq.Yard/Sq. 

Yard of cloth in 

export product.. 

1.01 kg/kg Content in 


fittings. 3 Stainless Steel Strip AISI 301 1.02 kg/kg Content in 

export product


Group 

C1642 Connector Harness DC 1 No. 1 DC Plugs 2Nos. 

Charger Cable Assembly 2 PVC Insulated Cables 1.9 Mtrs. 

C1643 Platform for Electronic 

Balances & Weighing 

Systems 

C1644 Galvanised Lamp stand 

made of CRCA Sheet 

C1645 1) Mini Dumper 

2)Front end Loaded cum 

Dumper 

3) Cement Concrete 

Mixer 


Group 

C1647 Capital Goods & 

Machinery notelsewhere 

specified. 

1 No. 1 Level Assembly 1No. 

2 Load Cell of relevant Load 1No. 

1 Kg 1 CRC Sheet/Coils 1.05Kg/Kg content in 


2 Zinc 4% of net weight of 

steel item to be 

galvanized. 

1 No. 1 For export item No. 1) 

(i) Gear Box 

1No. 

ii) Front Axle 1 No. 

C311 

(iii)View for Oil Level 1 No. 

(iv)Plug 1 No. 

(v)Distributor Valve and handle Net to net. 

2 For export item No. 2) 

(i) Gear Box 

1 No. 

ii) Front Axle 1No. 

(iii)View for Oil Level 1 No. 

(iv)Plug 1 No. 

(v)Distributor Valve and Handle Net to net. 

3 for export item No. 3) 

(i) Gear Box 

1No. 

(ii) Front Axle 1No. 

(iii) View for Oil Level 1No. 

(iv) Plug 1No. 

(v)Distributor Valve and Handle Net to net. 

(vi)Hyd. Motor 1 No. 

(vii)Control Valve 1 No. 

1 No. Any and / or all the following 

components which are actually 

required for manufacturer of the 

machinery. 

COMPONENT :- 

1 Belt with specification Net to net. 

2 Motors with detailed 

specification 

Net to net 

3 Timing Belt 102mm/100mm 


product. 

4 Switches, Control Panel and 

Fuses 

Net to net 

5 Electrical wires and cables with 

detailed specifications. 

102mtrs/100mtrs in 


6 Temperature Thermostat Net to net

C312 

Switches 

7 Fastners 102No./100No. 


product. 

8 Roller Chain 102Mtrs/100Mtrs 


product. 

9 Gasket of different type Net to net 

10 Camshaft Net to net 

11 Subassembly of Machine Net to net 

12 Oilseals Net to net 

13 Pulleys Net to net 

14 Measuring Instrument and valves 

as component 

15 Pipe fittings such as Elbow, Tee, 

Bars, Reducer, Coupling relevant 

material 

16 Relevant Bearings including 

Bush, Ball, Roller or Spherical or 

combination there of (SKF or 

equivalent No. of the bearing is 

to be specified in the application) 

17 Relevant Pipe Fitting including 

Tee, Bands/ Elbows/ Sockets/ 

Unions 

RAW MATERIAL:- 

Net to net 

Net to net 

Net to net. 

Net to net. 

1 Pig iron for the cast components 1.1 kg/kg content in 


2 Non Alloy Steel 

Plates/Coil/Sheet 

3 Alloy Sheet including SS 

Plates/Coil/Sheets 

4 Alloy Sheet/Non-Alloy Steel SS 

Rounds/Bar 







5 Brass Scrap. 102Kg/100Kg 


product. 

6 Aluminium Alloy 

Ingots/Rods/Bars 



7 Copper Alloy/Rods/Bars 1.01 kg/kg content in 


8 Relevant Type of plastic 

materials ABS, HDPE, LDPE, 

PVC compound Nylon6, 

Nylon66 

9 Non Alloy Steel Welded pipe of 

relevant dimension 

10 Alloy Steel Welded Pipe 

including S.S. Pipes of relevant 

dimension 

11 Relevant Carbon Steel pipes/ 

Tubes upto 24" diameter 

12 Relevant Stainless Steel Pipes/ 

Tubes having dia 15mm to 

400mm 

105Kg/100Kg 

content of the 

relevant material in 






1.02 Mtr./ Mtr. 


product. 

1.02 Mtr./ Mtr. 


product.

13 Structural materials, including 

Beams, Chennels, Angles, 

Chequered Plates, purlines 

C313 



14 S.S. Screen Wiremesh 1.05 Sq. Mtr./ 

Sq.Mtr.content in the 


15 Relevant Electrode/ Flux 2% of relevant steel 

to be welded for use 


a) Relevant welding Electrodes/ 

Welding Wires/Welding Rods 

2% of the weight of 

steel to be Welded 

b) Relevant Flux 

MISC. ITEMS:- 

Equal to the weight 

of welding wires 

1 Grease CIF value restricted 


2 Paint 

3 Varnish 

4 Lubricating Oil 

5 Grinding Wheels. 

6 Abrassives 

7 Rust Preventive Chemicals 

8 Polishing Compounds. 

9 Metal Polishing Chemical 

10 Deleted 

11 Deleted 

12 Cutting Wheel 

13 Paint & Thinner 

14 Self Adhesive Tape 

15 Relevant Chemicals 

1. Specification/Capacity & weight of capital goods alongwith number is to be indicated in the application. 

2. Net weight of component & sub assemblies to be imported to be procured indigenously to be given in the 

application & items to be manufactured from each raw material to be imported is to be given in the 

application. 

3. Net weight of components and items to be manufactured from each raw material to be imported is to be 

given in the application. 

4. Weight of component and item to be manufacturted from each indigenous material in export product is 

to be given in the applicatin 

5. Weight of components and the item given as per Note 2 to 4 should tally with net weight of capital goods 

to be exported. 

6. Total weight of each raw material is to be calculated on the basis of net weight given as per Note 3 above 

plus wastage as permitted in the norms for the particular raw material. 

C1648 3/4 Tube Fryer 

1 No. 1 S.S.Steel/Coil 1.10Kg/Kg content in 


2 S.S. Bar/Rod. 1.14Kg/Kg content in 


C1649 U.V. Sterlizer 1 No. 1 S.S. Sheet/Coil 1.01Kg/Kg content in 


C1650 Automobile Ignition Lock 1 No. 1 Zinc Ingots 1.10Kg/Kg content in 


2 Brass Sheet. 1.15Kg/Kg content in 

the export product.

3 Copper Sheet 1.15Kg/Kg content in 


4 CRCA Sheets/Coils 1.20Kg/Kg content in 


5 Non Alloy Steel Rods/Bars. 1.20Kg/Kg content in 


6 Spring Steel Sheet 1.20Kg/Kg content in 

the export proudct. 

7 Polyacetal 1.05Kg/Kg content in 


8 Steel Ball 2 Nos. 

9 Lock Pin 1 No. 

10 Cap 2 Nos. 

11 Latch 1 No. 

12 Lock Plates 10 Nos. or 13 Nos. 

(Net to net) 

13 Key Moulded 1 No. or 2 Nos. (Net 

to net) 

14 Tag Key 1 No. 

15 Cap Stator 1 No. 

16 Stator 1 No. 

17 Cam 1 No. 

18 Terminal 5 Nos. 

19 Housing 1 No. 

20 Plate Spring 1 No. 

21 Slide 1 No. 

22 Cap Outer 1 No. 

23 Spring Dowel - Large 1 No. 

24 Spring Dowel - Small 1 No. 

Note: The Components shall be allowed on net to net basis which the firm shall account for in the export 

product. 

C1651 Hair Styler Model No. 

4522 

1 No. 

(0.502Kg) 

1 Polycarbonate (MARKROLON 

2805 BLACK) 

C314 

0.097Kg. 

2 Polyamide Glass Filled 15% 

(Ultramide) 

0.066Kg. 

3 Polyamide (Polyloy) 0.16Kg 

4 HDPE (Durethane) 0.027Kg. 

5 Polyamide Glass filled 35% 

(ultramide). 

0.012Kg 

6 Polycarbonate (Markolon 2805 

Black) 

0.008Kg. 

7 Polymethylene Oxide ( Delrin). 0.006Kg 

8 Polyvinyl Chloride (Delrin) 0.009Kg 

9 Polyamide Nylon (PA 6 GF 15) 0.009Kg 

10 Univ. Master Batch 0.001Kg. 

11 Polycarbonate (APECHT) 0.021Kg 

12 Heating Element Wire 1-0-31mm 0.00mKg 

13 Heating Element Wire 2- 0.004Kg.

C315 

0.26Kgs. 

B) COMPONENTS 

1 Copper Strip DIN 1791-1.75 X 

0.35mm -0421129 

2 Bristal Bunch for 35mm brush 

4429098 

3 Spring Feeder (RSK) -4448039. 2No. 

4 Screw PAN 2.2 X 9.5C-0028138 1No. 

5 Ferrite ldumping bead -0818161 1No. 

6 Stranded wire red - 7strands 

0700926 

7 Stranded wire blue-7 strand 

0702090 

0.0015Kg. 

0.0070Kg. 

0.1400Mtrs. 

0.1400Mtrs. 

8 Wire and Terminal - 0716319 2 Nos. 

9 Insulating Tube (RSK) -0811240 0.0900Mtrs. 

10 Fixed Contact 1- 4475004 1No. 

11 Fixed Contact2-4475005 1No. 

12 Rotary contact 1-4475009 1No. 

13 Rotary Contact 2-4475010 1No. 

14 Power Cord - 2core/2PIn- 

4830803 

1No. 

15 Metal Cap - 4523011 1 No. 

16 DC Miniature motor- 1000W- 

4457080 

1No. 

17 FAc (RSK) - 4523003 1No. 

18 Pin (RSK) -710947 2No. 

19 Aluminium/Electrolytic 

Capacitor- 0622053 

20 Paper/Polyester capacitor - 

0623998 

1 No. 

1No. 

21 Diode BY 398 (RSK) - 0630574 1No. 

22 Switch (RSK) -4522062 1No. 

23 Diode in 4004- 630632 4No. 

24 Insulating tube for PCB - 

0811204 

0.030Mtrs. 

25 MICA nite- 4523006 6Nos. 

26 Terminal 01 - 4523024 2Nos. 

27 Terminal Taping- 4522043 2Nos. 

28 Terminal 02-4523062 2 Nos. 

29 Thermostate (RSK) - 0716439 1No. 

30 Switch connecting rod - 452307 1No. 

31 Speed nut - 066107 1 No. 

32 Lever Rod OR connecting Rod - 

4522005 

1No. 

33 Heat Cap - 4523010 1No. 

34 Sticker - 0855126 1 No. 

35 SS Ring -4485124 1 No.

C1652 Liquidiser Jar Complete 

for Mixer-Grinder Model 

No. 4250 

C1653 Mixer Grinder with Food 

Chopper & Liquidiser 

Jar Model No. 4249 

1 No. 

(0.764Kg) 

1 No. 

(2.82Kg) 

36 Tube Big Barrel- 4485120 1 No. 

37 Plastic Brinstal- 4522126 10Nos. 

38 Screw- 1.45 X 3.5 - 4485119 2No. 

39 CSK Screw 2.4 X 5- 0032109 2No. 

40 Brush Cap (Plastic) - 4522123 1 No. 

1 Polyoxy Methylene (POM Hosta 

Form C 9021) 

C316 

0.012Kg 

2 Polypropylene Natural (PP Hosta 0.010KG. 

Len PPN 1060). 

3 Acrylonitrilebutadiene Styrene 

Clear( Luran Clear Grey 388 S) 

0.556Kg. 

4 LDPE (Evaelvas) 0.018Kg 

5 Poly Butylene Terephthalate 

(Pocan B 7425 PBTP) 

6 Poly Oxy Methylene Master 

Batch 

B) COMPONENTS 

0.005Kg. 

0.002Kg. 

1 SINTERED BEARING BUSH 

FOR LIQUIDIZER JAR - 

4250073 

1No. 

2 SS Nracket - 4250272 1No. 

3 Round head revet for liquidizer 

jar - 140112 

4Nos. 

4 Cutter upper-4249065 1No. 

5 Cutter lower- 4249066 1No. 

6 Cutter Shaft- 4250075 1No. 

7 Metal bush Coupling - 4250274 2No. 

8 Rubber bush coupling -4250079 2Nos. 

9 Fibre Washer 7.2 X 13.0.4 - 

4250082 

2Nos. 

10 Copper Spring- 4203135 1No. 

11 Bronze Washer 7.2 X 11.5 X 0.2 

- 4213041 

1No. 

12 Washer 6 X 8.5 X 0.6- 4249177 1No. 

1 Polyoxy Methylene (POM Hosta 

Form C 9021) 

0.112Kg. 

2 Polypropylene Natural (PP Hosta 0.112Kg 

Lene PPN 1060) 


Clear (Luran Clear Grey 388 S) 

0.662Kg. 

4 LDPE (Evaelvad) 0.018Kg. 

5 Poly Butylene Terephthalate 

(Pocan B 7425 PBTP) 

6 Poly Oxy Methylene Master 

Batch 

7 Acrylonitrilebutediene Styrene 

White (ASA Luran S 778 T) 

8 Polyporopylene Black (P 

Hostalen Black PPN 1060) 

B) COMPONENTS 

0.005Kg. 

0.01Kg 

0.374Kg. 

0.121KG

1 Universal Motor -750 W- 

4249525 

C317 

1No. 

2 Speed Switch-4259011 1No. 

3 Diode BY 252 ZK-630478 1No. 

4 Resistor 150K- 0612910 1 No. 

5 Light Emiting Diode- 4249830 1No. 

6 Stranded Wire Red VDE 08 12- 

16 strands -700926 

7 Strands Wire Black VDE 0812- 

16 strands - 702103 

8 Stranded Wire Blue CDE 0812- 

16 strands 702090 

9 Flat Plug - 710969 6No. 

0.274Mtrs. 

0.635Mtrs. 

0.336Mtrs. 

10 Thermostat - 4291053 1 No. 

11 Cu Wrapper ZK- 4291025 1No. 

12 Resistor PTC ZK- 4291810 1No. 

13 Shrink Tube Cut- 4291024 1No. 

14 Insulation Leatheroid- 4243182 1No. 

15 Polyester Foil- 16mm width- 

805162 

16 Capacitor X foil EN 132400- 

622202 

0.04Mtrs. 

1No. 

17 S.S. Clamp - 4249035 1No. 

18 Pan Screw 4.2 X 16 ZK - 028140 4No. 

19 Metal Washer B 4.3 ZK - 

0108111 

4Nos. 

20 Slider Plate - 4250030 1No. 

21 PIN (CAM) -4250031 1No. 

22 Screw Counter Sunk 2.9 X 13- 

028209 

2 No. 

23 Pan Screw 3.5 X 16 ZK-028149 3 No. 

24 Rubber Legs- 4243054 3Nos. 

25 Power Cord-2 Core /2 Pin - 

3210465 

1No. 

26 Terminal with screws 717253 1 No. 

27 Pan screw 2.9 X 13 - 028065 2No. 

28 Cord Clamp- 4905343 1No. 

29 Grooved Pin-Din 1472-0125201 3No. 

30 Quick lock washer- 109705 3Nos. 

31 Spring ZK - 4250029 3No. 

32 Cutter Pair - 4249833 1No. 

33 Round Head Rivet for Chopper - 

140109 

4Nos. 

34 Sealing washer- 4250023 1No. 

35 Paper Laminated Stricker - 

4249096 

1No. 

36 Ball Holder- 4249107 1No. 

37 Ball ZK - 4249099 1No.

C1654 Hair Curler Model No. 

4522 

1 No. 

(0.506Kg) 

38 S.s. tube Sleve- 4249105 1No. 

39 Sintered Bearing Bush for 

liquidizer- 4250073 

C318 

1No. 

40 S.s. Bracket - 4250272 1No. 

41 Round Head Rivet for liquidizer 

- 140112 

4Nos. 

42 Cutter upper 4249065 1 No. 

43 Cutter lower - 4249066 1No. 

44 Cutter Shaft - 4250075 1 No. 

45 Metal Bush Coupling - 4250274 1No. 

46 Rubber Bush Coupling - 

4250079 

47 Fibre Washer 7.2 X 13 X 0.4 - 

4250082 

1No. 

2Nos. 

48 Copper Spring- 4203135 1No. 

49 Bronze Washer 7.2 X 11.5 X 0.2 

- 4213041 

1No. 

50 Washer 6 X 8.5 X 0.6- 4249177 1No. 

1 Polycarbonate (MARKROLON 

2805 BLACK) 

0.097Kg 

2 Polyamide Glass filled 15% 

(Ultramide) 

0.0120Kg. 

3 Polyamide (Polyloy) 0.016Kg. 

4 HDPE (Durethane) 0.024Kg 

5 Polyamide Glass filled 

35%(Ultramide) 

0.014Kg. 

6 Polycarbonate (Markolon 2405 

Black) 

0.004Kg. 

7 Polymethylene Oxide (Delrin) 0.005Kg. 

8 Polyvinyl Chloride (decelith) 0.010Kg 

9 Polycarbonate Clear(Markrolon 

2805) 

0.002Kg. 

10 Polyamide Nylone (PA 6 GF 15) 0.014Kg. 

11 Heating Element Wire 1-0-31mm 0.005Kg. 

12 Heating Element Wire 2- 

0.26Kgs. 

B) COMPONENTS 

0.004Kg 

1 Copper Strip DIN 1791-1.75 X 

0.35MM- 0421129 

00.30Kg. 

2 Bristal bunch for 35mm brush 

4429098 

0.0070Kg. 

3 Bristal bunch for 48mm brush - 

0880251 

0.0100Kg. 

4 Spring Feeder (RSK)- 4448039 2Nos. 

5 Screw PAN 2.2 X 9.5C - 

0028138 

1No. 

6 Ferrite dumping bead -0818161 1No. 

7 Stranded wire red- 7 strands 

0700926 

8 Stranded wire blue - 7 stand 

0702090 

0.1400Mtrs. 

0.1400Mtrs.

C1655 Hair Dryer Model No. 

4548 

1 No. 

(0.510Kgs) 

9 Wire and Terminal - 0716319 2No. 

10 InsulatingTube (RSK) -0811240 0.0900Mtrs. 

11 Fixed Contact 1- 4475004 1No. 

12 Fixed contact 2- 4475005 1No. 

13 Rotary Contact 1- 4475009 1No. 

14 Rotary Contact 2-4475010 1No. 

15 Power Cord -2 Core/ 2 Pin - 

4830803 

C319 

1No. 

16 Metal Cap- 4523011 1No. 

17 DC miniature motor - 1000W - 

4457080 

1No. 

18 Fan (RSK) 4523003 1No. 

19 Pin (RSK) -0710945 1No. 

20 Aluminium Electrolytic 

Capacitor -0622053 

21 Paper/Polyester Capacitor - 

0623998 

2No. 

1 No. 

22 Diode By 398 (RSK) - 0630574 1No. 

23 Switch (RSK) - 4522062 1No. 

24 Diode in 4004- 630632 4Nos. 

25 Insulating tube for PCB - 

0811204 

26 MICA Nite- 4523006 6Nos. 

27 Terminal 01- 4523024 2Nos. 

28 Terminal Taping - 4522043 2Nos. 

29 Terminal 02- 4523062 2Nos. 

30 Thermostat (RSK)- 0716439 1No. 

31 Switch connecting rod - 4523007 1No. 

32 Speed nut- 066107 1No. 

33 Lever Rod OR connecting Rod- 

4522005 

0.0300Mtrs. 

1 No. 

34 Heat Cap - 4523010 1No. 

35 Sticker -0855126 1No. 



0.041Kg 

2 Polycarbonate Black (Makrolon 

2805 Black) 

0.023Kg. 

3 Polyamide Glass Filled 35% 

(Ultramid B 35) 

0.021Kg. 

4 Polyamide (Zytel FR 720) 0.013Kg 

5 Polycarbonate White ( Makrolon 

2805 White) 

0.122Kg. 

6 Polyamide (POlyloy A 709) 0.032Kg. 

7 Heating Element Wire 1- 

0.320mm 

0.004Kg. 

8 Heating Element Wire 2-0.258 0.004Kg 

B) COMPONENTS 

1 Brush with plastic bristle - 1 No.

C1656 Mixer Grinder with food 

Chopper Model No. 3249 

1 No. 

(2.14Kgs) 

C320 

4471855 

2 Brush with nylon bristle- 441854 1 No. 

3 Brush round with handle - 

4479853 

1 No. 

4 Sticker double side - 4471031 1 No. 

5 Screw M 2.6 X 6 - 0034116 2 No. 

6 Ceramic capacitor (Single layer) 

-0622128 

1 No. 

7 Round Sticker Black - 4447043 1 No. 

8 DC miniature motor - 1000W- 

4457080 

1 No. 

9 Fan moulded - 4547067 1 No. 

10 Thermostate -0716319 1 No. 

11 Terminal 01-4447046 1 No. 

12 Terminal 03- 4447047 2 Nos. 

13 Micanite- 1width 15.50mm - 

4471009 

14 Micanite - 2width 12.08mm - 

4471010 

2 No. 

4 Nos. 

15 Mica Separator - 4471046 2 Nos. 

16 Terminal 02 - 4471029 2 Nos. 

17 PCB Unpopulated 4447003 1 No. 

18 Diode IN 4004-0630632 4 Nos. 

19 Diode BY 298- 0630441 1 No. 

20 Switch PSK- 4548001 1 No. 

21 Rivet B2*0 - 0144141 2 Nos. 

22 Connecting Terminal - 4473023 1 No. 

23 Cable Sleeve - 4532055 1 No. 

24 Switch Slider - 4516002 1 No. 

25 Cable Tie-0716270 1 No. 

26 Power Cord- 2 core/2 Pin - 

4830801 

1 No. 

27 Cord Clamp- 4905343 1 No. 

28 Trilock Screw- 0031129 1 No. 

29 Screw 2.3 X 5.5 - 5550016 1 No. 

30 Screw 5.3 X 13.0 - 0031003 2 Nos. 

31 Rubber pad round - 4471019 2 Nos. 

32 Rubber Pad oval- 4547078 2 No. 

1 Acrylonitrilebutadienes Styrene 


2 Polyoxymethylene (POM Hosta 

Form C 9021) 

3 Polypropylene Natural (PP Hosta 

Len PPN 1060) 

4 Polypropylene Black (PP 

Hostalen Black PPN 1060) 

5 Acrylonitrilebutediens Styrene 

Clear (Luran Clear Grey 388 S) 

0.374Kg. 

0.100Kg. 

0.103Kg 

0.121Kg 

0.066Kg.

6 Polyoxymethylene Master Batch 0.001Kg 

B) COMPONENTS 

1 Universal Motor -750 W- 

4249525 

C321 

1No. 

2 Speed Switch- 4259011 1No. 

3 Diode BY 252 ZK- 630478 1No. 

4 Resistor 150K- 0612910 1No. 

5 Light Emiting Diode - 4249830 1No. 

6 Stranded Wire Red VDE 08 12- 

16 

7 Stranded Wire Black VDE 0812- 

16 Strands -702103 

8 Stranded Wire Blue CDE 0812- 

16 Strands - 702090 

0.274Mtrs. 

0.635Mtrs 

0.336Mtrs. 

9 Flat Plug- 710969 6Nos. 

10 Thermostat - 4291053 1No. 

11 Cu Wrapper ZK- 4291025 1No. 

12 Resistor PTC ZK- 4291810 1No. 

13 Shrink Tube Cut - 4291024 1No. 

14 Insulation Leatheroid- 4243182 1No. 

15 Polyester Foil - 16mm width - 

805162 

16 Capacitor X Foil EN 132400 - 

622202 

0.04Mtrs. 

1No. 

17 S.s.Clamp -4249035 1No. 

18 Pan Screw 4.2 X 16 ZK -028140 4Nos. 

19 Metal Washer B 4.3 ZK - 

0108111 

4Nos. 

20 Slider Plate - 4250030 1No. 

21 PIN (CAM) -4250031 1No. 

22 Screw Counter Sunk 2.9 X 13- 

028209 

2Nos. 

23 Pan Screw 3.5 X 16 ZK - 028149 3Nos. 

24 Rubber Legs- 4243054 3Nos. 

25 Power Cord-2 Core/2 Pin - 

3210465 

1No. 

26 Terminal with screws - 717253 1No. 

27 Pan Screw 2.9 X 13- 028065 2Nos. 

28 Cord Clamp - 4905343 1No. 

29 Grooved Pin-Din -1472- 

0125201 

3Nos. 

30 Quick lock washer- 109705 3Nos. 

31 Spring ZK - 4250029 3Nos. 

32 Cutter Pair- 4249833 1No. 

33 Round Head Rivet for Chopper- 

140109 

4Nos. 

34 Sealing Washer - 4250023 1No. 

35 Paper Laminated Stricker - 1No.


Group 

C1658 Valve Seat Insert made of 

Alloy Steel of following 

Composition:-(i) 

Chromium 2, 4-4.8%, (ii) 

Molybdenum 0.36-0.72%, 

(iii) Tungston 0.5%, (iv) 

Nickel: 1.5-4.5%, (v) 

Cobalt: 1.6%, (vi) Boron: 

0.3%, (vii) Iron and 

Carbon: Balance 

C1659 Molybdenum Fine Wire 

(below 0.5mm Dia) 

C322 

4249096 

36 Ball Holder - 4249107 1No. 

37 Ball ZK- 4249099 1No. 

38 S.S. tube Sleeve- 4249105 1No. 

100 Kg. 1 Chromium Metal 

OR 

3.86Kg 

1 High Carbon Ferro Chrome 

(chromium Content of 52-60%) 

OR 

7.02KG. 

1 Low Carbon Ferro Chrome 

(chromium content of 65-70%) 

OR 

5.67kg. 

2 Ferro Molybdenum 

(Molybdenum content of 60- 

70%) 

0.85Kg 

3 Ferro Tungsten (with Tungsten 

content of 75%) 

0.67Kg. 

4 Nickel pellets/Shots 3.06Kg. 

5 Cobalt 1.6Kg. 

6 Boron 0.3Kg 

7 Melting scrap of mild steel 86.8Kg. 

1 Kg 1 Molybdenum Wire (above 

0.8mm Dia) 

1.08Kg. 

C1660 Ratchet Wheel Plates 1 Kg 1 SS Sheets/Coils made of AISI 

304 Grade (HR) 

1.50Kg. 

C1661 Oil Pressure Switch for 1 No. 1 Spring 1No. 

Motor vehicle 

2 Body 1No. 

C1662 Rod Thermostate of 

Different size 

3 Diaphragm 1No. 

4 Rivet Contact 1No. 

5 Relevant Screw 1 No. on net to net 

basis 

1 No. 1 MS Terminal Screw 2Nos. 

2 Plastic Base 1No. 

3 Plastic Cover 1No. 

4 Brass Base Plate 1No. 

5 Invar Rod of relevant size 1No. 

6 Brass Top Plate 1No. 

7 Ceramic Striker 1No. 

8 Brass Pillar Terminal 1No. 

9 Brass Clibration Nut. 1No. 

10 Berilium Copper Switch Blade 1No. 

11 Silver Contact fixed 1No. 

12 Brass Pillar Terminal 1No. 

13 Plastic Knob 1No. 

14 Silver Contact Moving 1No.


unarmoured control 


upto 1.1KV Size: 

112/0.275mm (6.8Sq.mm) 

X 4 Core 

C1664 PVC INsulated 

Unarmoured Control 


upto 1.1KV Size 

112/0.30mm (8sq.mm) X 

3 Core. 


Unarmoured control 


upto 1.1KV. Size 

72/0.24MM (3.35Sq.mm) 

X 3 Core 




upto 1.1KV, 

Size72/0.24mm 

(3.35sq.mm) X 4 core. 

C1667 Harrow Disc Plain 

C1668 Ring Gear Blank made of 

non alloy steel 

C1669 Stainless Steel 3 container 

lunchmate 

C1670 Heat Recovery Rotor (1 

No. Heat recovery rotor 

of 1 cubic meter having 

flute height of 1.5mm) 

15 Epoxy Adhesive 0.12Ml/piece 


Bars/Ingots. 

C323 

251.713Kg. 

2 PVC Resin 129Kg. 

3 Pthalate Plasticize (DOP) 64.5Kg. 



). 

21.5Kg. 


Bars/Ingots 

223.8Kg. 

2 PVC Resin 126.8Kg. 

3 Pthalate Plasticize (DOP). 63.4Kg. 



21.13Kgs. 

1000 Mtrs. 1 Copper CAthode/ CC Rod/Wire 

Bars/Ingots 

88.102Kg. 


3 Pthalate Plasticize (DOP). 47.427Kg. 



). 

15.828Kg. 

1000 Mtrs. 1 Copper CAthode/C Rod/Wire 

Bars/Ingots. 

117.456Kg. 


3 Pthalate Plasticize (DOP) 57.3Kg. 



) 

19.1Kg. 

1 Kg. 1 Alloy/Non Alloy Steel Plates of 


OR 

1.2Kg 

1 Alloy/ Non Alloy Steel Billets 1.40 kg 

1 Kg 1 Non Alloy Steel Bars 1.03 Kg. 

1 No. 1 Stainless Steel of relevant grade. 1.16 Kg/Kg content 


2 Getter Pills 1No. net to net 

3 Polypropylene Granules 1.05 Kg/1.05Kg 


product. 

1 No. 1 Aluminium Foil/Foil Stock 156.00 Kgs/per Cubic 

meter of media. 

2 Molecular Sieve 

(Powder/Pellet)/Silica Gel 

Powder) 

Net to net 

3 Clear Water based catalysed 

coating with relevant catalyst. 

19.20 Kgs. per Cubic 

metre of media. 

4 Relevant Adhesive 128.00 Ltrs./per 

Cubic metre of 

media. 

5 Relevant Thinner/Solvent. 16.70 Liters per 

Cubic metre of 

media. 

Note: In case of "Sensible" Heat Recovery Rotor, the input with quantity appearing at import item No. 1

& 4 shall only be allowed. 

C1671 Heat Recovery Wheel (1 

No. Heat recovery wheel 

incorporating Rotor of 1 

Cubic Mtr. volume 

having 1.9mm flute 

height). 

1No. 1 Aluminium Foil /Foil Stock. 122.00 Kgs./per 

Cubic Metre of 

Media. 

2 Molecular Sieve 

(Powder/Pellet)/Silica Gel 

Powder) 

Net to net 

3 Clear water based catalyzed 

coating with relevant catalyst. 

C324 

15.10 Kgs. per Cubit 


4 Relevant Adhesive 99.5 Litres/per Cubic 


5 Relevant Thinner/Solvent 13.10Litres per cubic 


6 Gear Motor 1 No. 

7 Speed Controller for Motor 1 No. 

In case of "Sensible" Heat Recovery Wheel, the input with quantity appearing at import item No. 1 & 4 

shall only be allowed. 

C1672 Asbestos Brake Linings 1 MT 1 Asbestos Raw .70 MT. 

(Rubberised with Nitrile 

Rubber) 

2 Nitrile Butadine Rubber (NBR) .22 MT 

C1673 Tin Alloy Ingot/ Anode/ 

Bar/ Slabs/ Pig 

C1674 Bourdon Sensing 

Pressure Gauge 

C1675 Anchor Plate for 

Dredging made of CR 

Non Alloy Steel. 

1 Kg. 1 Tin Ingots 

OR 


in the resultant 

product. 

1 Tin Scrap 1.06 Kg/Kg content 


product. 

2 Antimony Ingots. 1.02 Kg/Kg content 


product. 

3 Copper Scrap 

OR 



3 Copper Wire Bar/Cathode 1.02 Kg/Kg content 


product. 

4 Lead Scrap 

OR 



product. 

4 Lead Ingots. 1.02 Kg/Kg content 


product. 

5 Zinc Scrap 

OR 



product. 

5 Zinc Ingots/Slab 1.02 Kg/Kg content 


6 Bismuth (Elemental Form) 1.02 Kg/Kg content 


1 No. 1 Bourdon Tube 1 No. 

2 Diaphragm 1 No. 

3 Pointer 1 No. 

1 No. 1 Cold Rolled Non Alloy Steel 

Sheets/Wide Coils/Strip. 

C1676 Taps of high speed steel 1 No. 1 HSS ground blanks of relevant 

grade and size for taps. 

1.02 Kg. 

1NO.

C1677 (A) PVC Insulated 



core area 1.62 Sq.mm. 

Size: 35/0.24mm X 4 

Core(B) 2 Core X 

1.5Sq.mm PVC Insulated 

& Sheathed cable with 

1.0Sq.mm EArth 

conductor 

C1678 Platinum/Rhodium/Palla 

dium Catalyst Gauzes of 

different composition. 

C1679 Ferro Aluminium 

C1680 Power driven centrifugal 

Pump with motor or 

frame size 1071 (0.5HP). 


pump with motor of 

1000 Mtrs For export item (A) 

1) Copper Cathode/CC 

Rods/Wire Bar/Ingot. 

56.975 Kgs. 

2) PVC Resin 87.3 Kg. 

3) Pthalate Plasticiser (DOP) 43.65 Kg. 

4) Fillers (Forcal) 14.55 Kg. 

For export item (B) 

1) Copper Cathode/CC 

Rods/Wire Bar/Ingot. 

33.926 Kgs. 

2) PVC Resin 32.382 Kgs. 

3) Pthalate Plasticizer (DOP) 16.191 Kg. 

4) Fillers (Forcal) 5.702 Kg. 

1 Kg. 1 Platinum metal 1.01 Kg. per Kg. 


product. 

2 Pallaidum 1.01 Kg/Kg content 


3 Rhodium in powder form 1.01 Kg/Kg content 


1 Kg. 1 Aluminium Scrap (Taint & 

Tabor) 

C325 

1.17 kg/kg 

aluminium content in 

Ferro Aluminium 

2 Mild Steel Scrap 1.024 kg/kg Iron (Fe) 

content in Ferro 

Aluminium 

1 No. 1 Cold Rolled Non- oriented 

(CRNO) electrical Steel in Coil 

form OR Sheet in coil form. 

8 Kgs. 

2 Copper wire 

bars/CAthodes/Rods/winding/wi 

nding wires/strips 

0.975 Kgs. 

3 a) Electrolytic Grade Aluminium 

ingot for rotor. 

0.705 Kgs. 

b) Commercial grade Aluminium 

ingot for housing. 

0.705 Kgs. 

4 Stainless Steel Rod for Shaft. 0.686 Kgs. 

5 Relevant Ball/Sleeve/Roller 

Bearings. 

6 Insulation material consisting of 

paper, Nylon, Polyester, Amide, 

Nomex Film, Varnish, Polyester 

Cord, tape. 

7 Packing material-Craft paper 

Lable, Name Plate, Ribbon 

8 Motor Protectors/Thermal 

Protectors. 

2 Nos. 

9 Power Capacitors. 1 No. 

10 Plastic Insulated Wire/Cable. 6 mtrs. 

11 Terminals, Connectors. 8 Nos. 



value. 


policy. 

1 No. 

12 Non ferrous impeller -Copper 0.567Kgs. 

a) Tin. 0.068Kgs. 

13 Mechanical Seal 1No. 


(CRNO) electrical Steel Sheets 

4.5Kgs.

frame size 1063 (0.5HP). 


pump with 0.75 HP 

motor. 


pump with 1HP motor. 

C326 

OR Sheets in Coil Form. 

2 Copper wire 

bars/Cathodes/Rods/Winding/Wi 

nding wires/strips. 

0.822Kgs. 



0.493Kgs. 



0.492Kgs. 

4 Stainless Steel Rod for Shaft. 0.320Kgs. 


Bearings. 




Cord, Tape. 

7 Packing material-Craft Paper 



Protectors. 

2Nos. 

9 Power Capacitors. 1No. 

10 Non Ferrous impeller 

(a) Copper 

(b) Tin 


value 


policy. 

1No. 

0.190Kgs. 

0.042Kg. 

11 Mechanical Seal 1 No. 

1 No. 1 Cold Rolled Non- oriented 

(CRNO) Electrical steel sheets 

OR Sheets in Coil Form 

10.01Kgs. 

2 Copper Wire 

Bars/Cathodes/Rods/Winding/Wi 

nding wires/Strips. 

1.36Kgs. 



0.74Kgs. 



0.74Kgs. 

4 Stainless Steel rod for Shaft. 0.796Kgs. 


Bearings. 




Cord, Tape. 

7 Packing material-Craft paper 



Protectors 

2Nos. 

9 Power Capacitors 1No. 

10 Plastic Insulated Wire/Cable. 6Mtrs. 

11 Terminals, connectors. 8Nos. 

12 Non ferrous impellers 

(a) Copper 

(b) Tin 

13 Mechanical Seal 1No. 

1 No. 1 Cold Rolled Non-Oriented 

(CRNO)Electrical Steel Sheets 

OR Sheets in Coil form. 

upto 1.5% of FOB 

Value. 


policy. 

1No. 

0.595Kgs. 

0.087Kgs. 

12Kgs.


Group 

C1685 Ultra Press 

2 Copper Wire 

bars/Cathodes/Rods/Winding/Wi 

nding wire/Strips. 

1.975Kgs. 



1.127Kgs. 



1.126Kgs. 

4 Stainless Steel rod for Shaft. 1.40Kgs. 

5 Relevent Ball/Sleeve/Roller 

bearings. 


paper, Nylon, Nomex Film, 

Varnish, Polyester Cord, Tape. 

7 Packing material - Craft paper 



Protectors. 

C327 

2Nos. 

9 Power Capacitors. 1No. 

10 Plastic Insulated wire/Cable. 6Mtrs. 

11 Terminal Connectors. 8Nos. 

12 Non Ferrous impeller 

(a) Copper 

(b) Tin 

upto 1.5% of FOB 

Value. 


policy. 

1 No. 

0.931Kgs. 

0.136Kg. 

13 Mechanical Seal. 1No. 

1 No. 1 Eddy Current meter 1No. 

2 Cluth Break 1No. 

3 Overload Protector 1No. 

4 Fly Wheel 1No. 

5 Carbon Steel of relevant grade. 1.05Kg/Kg content in 


6 AG Break Motor 1No. 

7 Rotary Cam Switch 1No. 

8 Slide Counter 1No. 

9 Motor Lubrication unit 1No. 

10 Bearing case 1No. 

11 Spherical Roller Bearing. 1No. 

12 Ball Bearing. 2No. 

13 C Roller Bearing. 1No. 

14 Surge Tank 1No. 

15 Alloy Steel of relevant grade. 1.05/Kg content in 


16 Front GIB Plate right hand 1No. 

17 Front GIB Plate for 100T Press 

left hand 

1No. 

18 GIB Plate Rod 2Nos. 

19 MS Plates 1.05/Kg content in 


20 Gear End Plate 1No.

21 Cylinder 1No. 

22 Worm wheel 1No. 

23 Dual Solenoid valve 1No. 

C1686 Mineral Insulated 

Resistance Temperature 

Detector (RTD) Assembly 

1 No. 1 RTD Element of relevant 

specification 

1 No. 

C1687 Tungsten Contact having 1 kg. 1 Tungsten Rod 0.95kg 

55%+/-2% Tungsten by 

weight 

2 Abrasive Wheel 3Nos. 

C1688 Deleted 

C1689 Monocular/Binocular 

Microscope 

C1690 Drive Shaft Assembly, 

Front Wheel Drive- 

LH/RH without ABS 

Ring. 

C1691 Drive Shaft Assembly, 

Front Wheel Drive- 

LH/RH with ABS Ring. 

1000 Sets 1 Halogen Lamp (6 V or 12V - 

20W or 30W) 

1000Nos. 

2 Stainless Steel Hard Wire 

1.60mm 

32Kgs. 


1.00mm 

32Kgs. 


4.00mm 

32Kg. 

5 Step -down transformer/power 

supply Unit input 120 V or 240 

V out put 6 V or 12 V. 

1000Nos. 

6 Power Cord with Plug. 1000Nos. 

7 On-Off switch 1000Nos. 

8 Relevant Achromatic objective 

lens. 

1000 Sets 

9 Lamp Holder 1000Nos. 

10 Socket with fuse. 1000Nos. 

11 Polyurethane Paint/Grease, 

Stainless Steel Screws, Circlips, 

Spring Washers, Hardened & 

Straightened Ground Shaft upto 

5mm Dia, Strain Relieves 

Adhesive, Rubber or Plastic parts 

and Connectors 

C328 


Value. 

12 Raw Optical Glass 218.6 kg 

1 pair 1 C/V Joint Boot Seal 2Nos. 

2 T/P Boot Seal 2Nos. 

3 Clamps 6Nos. 

4 Molykote VN 2461 C Lithium 

Grease 

0.25Kg. 

5 C V Joint Grease 0.25Kgs. 

6 Shaft Ring Blank 2Nos. 

7 T/P Housing Blank 2Nos. 

8 C/V Outer Race Blank. 2Nos. 

9 Spider Tripot Joint 2Nos. 

10 C/V Inner Race. 2Nos. 

1 pair. 1 C/V Joint Boot Seal 2Nos. 

2 T/P Boot Seal 2Nos. 

3 Clamps. 6Nos.

C1692 Stainless Steel LPG Stove 

with /without auto 

ignition . 

4 Molykote VN - 2461 C Lithium 

Grease 

C329 

0.25Kg. 

5 C V Joint Grease 0.25Kgs. 

6 Shaft Ring 2Nos. 

7 T/P Housing Blank 2Nos. 

8 C/V Outer Race Blank 2Nos. 

9 Spider Tripot Joint. 2Nos. 

10 C/V Inner Race 2Nos. 

11 ABS Ring 2nos. 

1 No. 1 Stainless Steel Sheet/Coil of 


2 Gas Valve with/without Ignition 

Unit. 



Net to net with 

accountability 

3 Brass Honey Scrap 1.06Kg/Kg content in 


If the product is exported without Auto Ingnition Unit, the import item no.2 viz. Gas Valve shall be 

allowed without ignition Unit. 

C1693 Hot Forged Steel nuts 1 No. 1 Forged Blank Nut without thread 1No. 

of relevnt grade of alloy/non 

alloy steel and of relevant size. 

C1694 Copper Bonded Ground 1 kg. 1 MS Bright Bars/Wire Rods. 0.97Kgs. 

Rods UL approved (0.01 

inches copper coating). 

2 Copper Bar/Cathodes/Wire Bars. 0.08Kgs. 

C1695 Transformers upto 500 

VA 

1 No. 1 CRGO/ CRNO Lamination E & I 

Strips 

OR 



CRGO/ CRNO Steel Sheet/Coils 1.07 kgs/kg content 


2 Relevant Copper Wire (Coated 

including enamelled / self 

solderable enamelled or 

uncoated) 

3 Mylar Polyester film of relevant 

thickness and width 

4 Electrical Grade Insulating Tape 

(18 to 45 mm width, with or 

without adhesive) 



1.02 Mtrs/ Mtr 


product. 

1.02 Mtrs/ Mtr 


product. 

5 Relevant Nylon 66/ Polybutalene 1.02 kgs/kg content 

Terrapthe-late/ Polyethylene 

Terrapthelate/Nylon6/Polyphenyl 

ene Sulphide/PET 

OR 


Bobbin 

Net to Net 

6 Deleted 

7 Relevant PVC or Lead Wire / 

Cable 

8 a) PVC Sleeve Net to net 

1.01 Mtrs/Mtr 


product 

b) Terminal 

OR 

Net to net 

Insulated Faston Terminals/fully 

vinyl Insulated Female 

disconnects 250 Series 

Net to net 

9 Electrical Insulating Paper/ 1.02 Kgs/kg content

C1696 Turbocharger 

C1697 Nickel Cadmium Cells 

(Sintered plate) 1.2 Volts 

as per European 

Standard EN 2570 or 

equivalent. 

C1698 Aluminium Alloy Cast 

Flanges. 

C1699 35mm KB 10 

Photographic Camera. 

C330 

Nomex paper of relevant GSM in the export product 

10 Housing Net to net 

11 Varnish/Epoxy 

Resin/Thinner/Hardener 

/Lacquers 

1 No. 1 Shaft & Wheel. 1No. 

2 Hoising Turbine Casting 1No. 

For 100 

Ampere 

Hour. 

3 Seal, Split Ring. 1No. 

4 Collar Thrust. 1No. 

5 "O" Ring 1No. 

6 Circlip 1No. 

7 Slinger, Oil 1No. 

8 Nut lock 1 No. 

9 Impeller 1No. 

10 Seal, Split Ring. 1No. 

11 Thrust Bearing 1No. 

12 Journal Bearing 1No. 

13 Retaining Ring. 1No. 

14 Pin roll 1No. 

1 Nickel Fibre Mat Fibrex 6.25SFT. 

OR Nickel Powder Type 

287/255/210 

0.7Kg 

2 Non -Woven Separator 2.81 M2 



3 Nickel Powder Type 

287/255/210 

0.625Kg. 

4 Celgard 3400/3500 film. 2.5M2. 

5 Vented Filler Caps. 1No. 

6 Nylone Moulding 

Granule/Powder. 

1 Kg. 1 AluminiumAlloy ingots/ scrap of 


OR 

0.512Kg. 

1.10 Kg/ kg content 


a) Aluminium Ingots 1.10 kg/kg content in 


b) Relevant alloying elements such 

as silicon metal, manganese 

metal, magnesium metal etc. 

1 No. 1 Black Polyester Film (0.135x23 

mm) 

2 Transformer KB10 1 No. 

3 Lens Meniscus- Front 1 No. 

4 Lens Meniscus- Black. 1No. 

5 Spring High Energy. 1No. 

6 Reflector 1No. 

7 Lense, Objective 1No. 

8 Lense, Eye. 1No. 



0.0182 Meter


Group 

C1701 Ferro Calcium Cored 

Wire (containing calcium 

9 Spring Shutter Return. 1No. 

10 High Voltage Diode. 1No. 

11 Spring Contact- Battery, 

Negative 

C331 

1No. 

12 Neon Lamp 1No. 

13 Trigger Transformer (KB 10). 1No. 

14 Reflector Cover. 1No. 

15 Reflector Mount. 1No. 

16 Capacitor, Ceramic, 1000pF. 1No. 

17 Capacitor, Electrolytic, 160uF. 1No. 

18 Flash Tube, Xenon Gas. 1No. 

19 Transistor Power 2 S D965 1 No. 

20 Lubricomp PDX-D-5373 KOD 

BK8 115 

21 SS Strip .007" X 1.25" T 301 1/2 

H 

22 SS Strip 0.006" X 1" Plated with 

Nickel. 

1.15gms. 

1.14gms. 

0.37gms. 

23 SS 0.008"X1.65" CT 301 1/2 H 2.83gms. 

24 CU-Ni Alloy Strip 0.015" X 

1.875" EK 435 

1.897gms. 

25 K20 Foam Sheet 3 mm thick 560 Sq.mm 

1 Kg 1 Calcium Metal Granules (Ca 

content 98% min). 

1.02Kg/Kg Calcium 

Granules content 

granules & Iron Powder) 2 Iron Powder 1.015Kg/Kg Iron 

powder content. 

C1702 Silver Contacts/Silver 

Alloyed contacts or 

Wire/Silver profiles 

contacts/Silver Bimetal 

Contacts/Silver Bimetal 

Profiles/Sheet 

Contacts/Silver Contacts 

on Carrier/Silver Alloyed 

Contacts on Carrier/Non- 

Ferrous Metal Contacts. 

C1703 Lacquered Electrolytic 

Plate Sheet. 

C1704 Copper Clad/Coated 

Steel Wire Single or 

Stranded having single 

wire less than 0.5mm dia. 

C1705 1) Resistance wire: single 

or stranded or wound on 

Fibre Glass Core having 

single wire less than 

1 Kg. 1 Unwrought Silver having purity 

more then 99.9%. 

2 Any other relevant 

metal(s)/alloying metals(s) 

1 Kg. 1 Electolytic Prime Quality 

Tinplate of relevnt thickness. 


silver in the export 

product. 


relevant 

metal/alloying metal 


1Kg. 

2 Relevant Lacquer. 0.01Kg. 

1 Kg. 1 Copper Clad/Coated Steel wire 

more than 1mm diameter. 

2 Wire Drawing Dies, Drawing 

Lubricants welding Dies. 

3 Plastic Bobbins, Plastic Spools, 

protecting paper/films. 

1 Kg. 1 a) Copper Nickel Alloy Wire 

1.00mm or more diameter 

OR 

Nickel Chromium Alloy Wire 

1.00mm or more diameter. 

1.02Kg. 

2% of the FOB vlaue 

of export. 


policy. 

1.00Kg. 

1.00Kg.

0.5mm, using(a) Copper 

Nickel Alloy(s) OR (b) 

Nickel Chromium 

2 Alloy Master batches/Wire 

Drawings Dies/ Welding Dies 

Glass Fibre Yarn. 

Alloy(s). 3 Plastic Bobbins, Plastic Spools, 

Protective paper/film, drawing 

Lubricants. 

C332 


of export. 


policy. 

Import of Alloy in 1 (a) or (b) will be allowed depending on the alloy used in export product (a) or (b). 

C1706 Pump set with AC SQ 

Induction motor. 

1 Set. 1 AC SQ Induction motor of 

relevant wattage & Speed. 

1 No. 

C1707 AA Alkaline Battery 1 No. 1 Electrolytic Manganese Dioxide. 10.34gms. 

(24gms) 

2 Zinc Powder 4.12gms. 

C1708 Cooling Tower complete 

including in completely 

1 No. 

(weight 

3 Potassium Hydroxide Flakes. 1.6gms. 

4 Zinc Oixide Powder 0.07gms. 

5 Crystalline Graphaite 

Powder/Synthetic/Natural 

Graphite. 

0.628gm. 

6 Gallant Powder/Galling Agent I 

& II 

0.043gm. 

7 Indium Acetate Powder. 0.0024gm. 

8 Sealent/Asphati Piton C/A & 

P/T. 

0.04gm. 

9 Surfactant. 0.0002gm. 

10 Paper for laminated Non-Woven 

Separator/(Main & Bottom) 

0.172gms. 

11 Nickel Plated Steel Cane 

OR 

1No. 

Non Alloy Steel Sheet. 5.9gms. 

12 Tin Plated Brass Wire/Conductor 0.43gm. 

13 Nylon/Plastic Top. 1No. 

14 Re-inforcing Support Ring 

OR 

1No. 

Nickel Chromium Alloy Wire 

1.00mm or more diameter. 

1.26gms. 

15 Negative Steel Cap 

OR 

1 No. 

Non Alloy Steel Sheet. 0.736 gms. 

16 PVC Shrink Foil/Shrink Sleeve. As per packing 

policy. 

17 PVC Label 

OR 

1No. 

Self Adhesive PVC Sheet for 

Label. 

4.2Sq.inch. 

18 Duplex Board for packing. As per packing 

policy. 

19 Carbon Coating/Carbon Paste. 0.026gms. 

20 NS Clean 1% of FOB value, if 

non alloy steel sheet 

for cap, can & ring 

are imported) 

21 Press Oil 1% of FOB, if non 

alloy steel sheet for 

cap, can & ring are 

impoorted. 

1 Isopthalic Polyester Resin. 630gm/Kg GRP 

Component content

knocked down condition, 

with or without 

accessories and other 

parts. 

C1709 Suspension Hanger made 

of Stainless Steel Wire- 

alongwith 

contents of 

various 

input to be 

indicated). 

2 Glass Roving/chopped strand 

mat/surface mat/woven rovings. 

C333 

in the export. 

420gm/kg GRP 

component content in 


3 Polypropylene. 1.05Kg/Kg 

polypropylene 

component content in 


4 PVC Fill Sheet 

OR 

The following inputs with their 

quantity for making 1Kg. of PVC 

fill sheet:- 

1.05Kg/Kg PVC fill 

sheet component 


product. 

a) PVC Resin (Suspension Grade) 0.945Kg. 

b) Titanium Dioxide. 0.060Kg. 

c) Processing Aid. 0.011Kg. 

d) Impact Modifier 0.014Kg. 

e) Paraffin Wax. 0.005Kg. 

f) Calcium Citrate. 0.003Kg. 

g) Lubricant/Heat Stabiliser. 0.038Kg. 

h) Filler (Calcium Carbonate) 0.021Kg. 

i) Carbon Black. 0.002Kg. 

5 Relevant Bearings Net to net basis with 

accountability clause. 

6 Plywood/Pine Lumber 1.05 

cub.meter/cub.meter 


product 

7 SS Tube of relevant size 

OR 

1.02 Mtr./Mtr. 


product. 

Stainless Steel Plates/Sheets 1.05 kg/kg content in 


8 Mild Steel Universal 1.05 kg/kg content 

9 Arsenic Pentaoxide 0.7063 Kg/M3 of 

Plywood / Pine 

Lumber used 

10 Cabosil/Fumed Silica Upto 2% of the 

quantityof isophthalic 

Polyester Resin used 

11 Foam Core Resin Upto 2% of the 

quantity of glass 

roving/chopped 

strand mat/Surface 

mat/woven roving 

used 

1 Kg. 1 Stainless Steel Wire Rods- Grade 

AISI 302 



Grade AISI 302. 

C1710 Polyesterimide 

Enamelled Copper 

1 Kg. 1 Copper Wire Rod/Cathodes. 1.01 Kg/Kg content 


Wire/Strip. 2 Polyestermide Enamel. 1.01 Kg/Kg content 


C1711 Plastic (Ethylene Copolymer) 

Clad/ Coated 

Tin free Steel Tapes for 

cable armouring 

containing 93% Tin free 

Steel and 7% plastic 

C1712 Bathroom jali with frame 

size 20Cm X 20 Cm made 

of stainless steel sheet 

grade AISI 430. 

C1713 Ventilation jali with 

frame having hole made 

of stainless steel 

sheetgrade AISI-430. 

C1714 High Chromium Valve 

Seat inserts with 

Chromium content 35% 

or more. 

C1715 Abrasive Stone with 

Grain Bond of ratio 

57:43. 


1C x 300 Sq.mm 11/11KV 

(UE) XLPE insulated and 

screened, aluminium wire 

screeing over insulation 

and armouring ALXLPE 

PVCS, AWA PVC Cable 

Minimum export weight 

2681.6 Kg/Km. 


1C x 300 Sq. mm 19/33 

KV (E) XLPE insulated 

and screened, 

aluminimum wire 

screening over insulation 

1 Kg 1 Tin Free Steel / Wide Coils 1.06 Kg/Kg content 


2 Plastic (Ethylene Co-Polymer) 1.05 Kg/Kg content 


1 Kg. 1 Stainless Steel Sheet Grade- 430 1.30 Kg/Kg content 


1 Kg. 1 Stainless Steel Sheet Grade AISI 

-430 

C334 



1 MT. 1 M.S. Scrap. 535.00 Kg. 

2 Carbon. 21.40 Kg. 

3 Ferro L.C. Chrome 42.80 Kg. 

4 Ferro H.C. Chrome 42.80 Kg 

5 Pure Chromium 749 Kg. 

6 Ferro Molybdenum 128.40 Kg. 

7 Nickle. 171.20 Kg. 

8 Cobalt. 214.00 Kg. 

9 Ferro Tungsten. 42.80 Kg. 

10 Tungsten 128.40 Kg. 

11 Boron 64.20 Kg 

1 Kg. 1 Silicon Carbide. 0.57 Kgs. 

1 Metre. 1 EC Grade Aluminium 

Rod/Ingots. 

0.812 Kg/Metre. 


Rod/Ingots. 


3 XPE Semi Conducting 

compound. 


4 XLPE Insulation. 0.4487 Kg/Metre. 

5 PVC Resin. 0.238 Kg/Metre. 

6 DOP 0.1165 Kg/Metre. 

1 Meter. 1 EC Grade Aluminium 

Rod/Ingots. 



Rod/Ingot 


3 XLPE Semi-Conducting 

Compound. 


4 XLPE Insulation. 0.806 Kg/Mtr.

and armouring ALXPE 

PVCs AWA PVC Cable - 

Minimum export weight 

3850Kg/Km. 


core X 185Sq. mm 11/11 

KV (UE) XLPE insulated 

and screened, aluminium 

wire screening over 

individual core ALXPE 

PVCs FPVC cable 

minimum export weight 

6745.1 Kg/Km. 


Core X 70 Sq. mm 11/11 

KV(UE) XLPE insulated 

and screened, aluminium 

wire screening over 

individual core ALXPE 

PVCs FPVC cableminimum 

export weight 

4300Kg/Km. 

5 PVC Resin 0.365 Kg/Mtr. 

6 DOP 0.1797 Kg/Mtr. 

1 Metre. 1 EC Grade Aluminium 

Rod/Ingots. 



Rod/Ingots. 


3 XLPE Semi-conducting 

Compound. 

0.1918 Kg/metre. 


5 PVC Resin. 1.227 Kg/metre. 


7 Galv Flat Steel Wire. 1.183 Kg/Metre. 


Rod/Ingots. 



Rod/Ingots. 


3 XLPE Semi-conducting 

Compound. 



5 PVC Resin. 0.7475 Kg/Metre. 


7 Galv Flat Steel Wire. 0.9615 Kg/Metre. 

C1720 Cabinet parts made of 1 Kg. 1 Galvanised relevant steel sheets. 1.05 Kgs. 

Galvanised Steel Sheets. 2 Relevant fastners. Net to net. 

C1721 Contact element for 

electrical/electronic 

switches. 

C1722 Pilot Light (containing 

relevant Zinc Alloy). 

C1723 Differential Bevel Gears 

made of Alloy Steel (B 

1 No. 1 Nylon 66 or PBT Plastic Powder. 1.05 Kg/Kg content 


2 Brass Strip/Rod 1.05 Kg/Kg of brass 


3 Master Batch powder. 1.05 Kg/Kg of the 


1 No. 1 Zinc Alloy 1.07 Kg/Kg content 


2 Nylon 66 or PBT Plastic Powder. 1.05 Kg/Kg content 


3 Poly-Carbonate plastic powder. 1.05 Kg/Kg content 


4 Brass Strip. 1.05 Kg/Kg content 


5 Relevant Silicon Rectifier Diodes Net to net. 

(1 AMP). 

6 Relevant Chip Resistor. Net to net. 

1 No. 1 Alloy Steel Bars of relevant 

Grade. 

C335 



forging Process) 2 All Consumables including dies. CIF value restricted 

upto 8% of the FOB 

Value. 

C1724 Deleted 

C1725 Polyester tap lapped, 

Nomex paper covered, 

1 Kg. 1 Glass Fibre Yarn. 1.01Kg/Kg content in 


fibreglass covered 2 Nomex Armid paper. 1.01Kg/Kg.

C1726 

varnish bonded 

aluminium conductors. 

237-103 GDS Clamp 1 No. 1 Wire protect 0114-0237. 3Nos. 

2.5Qmm 3 Pole Grey, 

0237- 0103/0999-0990/PW 

11-0000 (weighing 

2 

3 

Contact Pin 0103-0237. 

Screw 3 X 4.5mm 0125-0237. 

3 Nos. 

3Nos. 

2.79grams). 4 Polyamide 6.6 Grey 9910-102. 0.79gms. 

C1727 284-621 Terminal Block 1 No. 1 Cage Clamp 106-284. 3Nos. 

35 Qmm/3x10Qmm/0284- 

0621/0999-0990/PW 11- 

2 Copper STrip Sn/Pb Coated 050- 

341. 

18gms. 

0000 of diferent colour 

3 Polyamide 6.6 of different 23gms. 

(weighing 55.2 grams). 

colours 9910-102. 

C1728 280-101 Side Entry 1 No. 1 Cage Clamp 106-280. 2Nos. 

Clamp 2.5mm2/ Cage 

Clamp connection 0280- 

0101/0999-0990/PW/11- 

0000 of different colour 

(weighing 3.96gms.) 

2 

3 

Current Bar 105-280. 

Polyamide 6.6 of different 

colours 9910-107. 

1No. 

2.8gms. 

C1729 Silica Bricks/Shapes for 1 MT. 1 Quartzite 1570 kg 

Glass Melting Furnace 

2 Hydrated Lime 79 kg 

C1730 Glass Fibre Reinford 

Plastic Pipe with coupler 

(containing minimum 

75% of glass fibre 

required for deep well 

hand pumps). 

C1731 Magnesium cored wire 

(containing mangesium 

granules having Mg. 

content 99% min.). 

C1732 Ferro-Silica-Calcium ( 

FESICA) Cored Wire 

(containing FESCICA 

alloy powder having Ca. 

28-33%, Si. 57.65%, Fe. 

4% min. and A1. T. P & 

S:traces). 

C1733 Cold Rolled Grain 

Oriented (CRGO), fully 

processed, Silicon- 

Electrical Alloy Steel 


with insulating coatings 

of inorganic/organic 

3 Silicon Carbide Powder 

OR 

20 kg 

3. Silicon Metal Powder 15 kg 

4 Dextrine 

OR 

20 kg 

4. Gaulac 

9 kg. 

5 (a) Alloy Steel Mould 0.03 No. 

C336 

(b) Wooden Mould 0.01 No. 

1 MT 1 Relevant Glass Fibre. 765Kg. 

1 Kg 

(Granule 

content). 

1 Kg 

(alloy/powde 

r content). 

1 Magnesium Metal Granules (Mg. 

content 99% min). 

1 Ferro-Silica-Calcium 

(FESCICA) Alloy powder 

(containing Ca: 28-33%, Si: 57- 

65%, Fe: 4% min and Al., Ti, P 

& S : traces). 

1000 Kg. 1 Cold Rolled Decarburized, 

Magnesium Oxide (MgO) 

coated, Silicon Electrical Alloy 

Steel Strips/ Wide Coils of 

relevant grade containing 2.5% 

to 3.5% Silicon 

2 Relevant Inorganic/Organic 

coating material. 

1.02Kg/Kg content. 

1.02Kg/Kg content. 

1100Kgs. 

10Kg.

meterial. 

C1734 Non Cast Hardware 

Fittings made of Non 

Alloy/Alloy/Stainless 

Steel Rod 

1 Kg. 1 Non Alloy/Alloy/Stainless Steel 

Rod of relevant grade 

2 Cutting and profile machine 

tools: viz (a) Cutters (b) Carbide 

Tips (c) Drils (d) H.S.S. Taps. 

C1735 Pin made of Carbon Steel 1 Kg. 1 Carbon Steel Sheet/Strip or 

relevant grade. 

C1736 Deleted 

C1737 Deleted 

C1738 Deleted 


Group 

C1740 Handle Assembly made 

of Stainless Steel for 

operation of Butter Fly 

Valve. 

C1741 Coaster Brake Hub for 

Bicycle containing 263gm 

of item 1 and 608 gm of 

tiem 2 

1 No. 1 Stainless Sheet/Strip/Wide Coils 

made out of relevant grade. 

1 Piece. 1 Non Alloy Steel CRCA/HR 

Sheet/Coil (Second/Defective) 

C337 

1.1 Kg. 






513 Gms. 

2 MS/Non Alloy Steel Round/Rod. 1277Gms. 

All the conditions given in note 1 to 8 below SION at C-122 will also be applicble for this SION. 

C1742 Industrial Boiler/Sub 1 No. COMPOMENTS: 

assemblies of the Boilers. 

1 Pump/ Pump with motor Net to net. 

2 Level Switch Net to net. 

3 Level Gause Net to net. 

4 Flame Relay with base plate. Net to net. 

5 Gas Train. Net to net. 

6 UV Detector. Net to net. 

7 Flexible Cables. net to net. 

8 Float. Net to net 

9 Stainless Steel Pressure Spring. Net to net. 

10 Burner Net to net. 

11 Temperature Controller/ 

Temperature indicator 

Net to net. 

12 Burner Rod Assembly Net to net. 

13 Gate/ Globe Valve Net to net. 

14 Straight Way Valve Net to net. 

15 Safety valve Net to net. 

16 Open Bonnet. Net to net 

17 Blowdown Valve Net to net 

18 Disc Check Valve. Net to net. 

a) Ignition electrode Net to net 

b) Oil Flow Meter Net to net 

19 RAW MATERIAL: BQ Steel 

plates (Carbon Steel Plate) 



20 Welding Electrodes and/or 2% of the weight of

C338 

Welding Wire. the relevant steel to 

be welded. 

21 Steel Tubes/Pipes of relevant 

grade and size. 

1.02 Metre/mtr 


product. 

OR 

1.02 Metre/Mtr 


product. 

Note: Wherever Welding Wire is asked for import Welding Flux may also be allowed for import equal to 

the quantity of Welding Wire. 

C1743 Motorized three wheelers 

in CBU/CKD/SKD 

condition powered by 

diesel engines of capacity 

from 300 c to 550cc. 

1 No. RAW MATERIAL:- 

(1) HR/CR Sheet/Strips/Coils. 



2 Aluminium Alloy Ingot. 1.07Kg/Kg content in 


3 Seamless Steel Tube of relevant 

dia, thickness and grade. 

Net to net. 










(NBR/ PBR) 



9 Relevant Paints 

COMPONENTS: 

6.05 Ltrs for one 

number of export 

product. 

10 Main shaft assembly Net to net 

11 Front Wheel Axle Assembly Net to net 

12 Hub Pin Set Net to net 

13 Differential Gear Net to net 

14 Front Brake Drum Net to net 

15 Rear Wheel Axle Assembly Net to net 

16 Slider block. Net to net 

17 Propeller Shaft (LH+RH) Set. Net to net 

18 Hydraulic Brake Assembly. Net to net. 

19 Shock Absorber Rear (1set = 

2No.) 

Net to net 

20 Shock Absorber Front. Net to net 

21 Gas Spring. Net to net. 

22 Ball Brg. 98025 Net to net. 

23 Ball Brg. 6204-ZZ. Net to net. 

24 Ball Brg. 6302 Net to net 

25 Speedometer. Net to net. 

26 Control Cable (Set of 11) Net to net. 

27 Rear View Mirror Assembly. Net to net. 

28 Wire Harness Main. Net to net.

C1744 Hydraulic Jacking Beam 

Model SJ 15 

1 No. (110 

Kgs) 

29 Wire Harness Dashboard. Net to net. 

30 Battery Cable Negative. Net to net. 

31 Battery Cable Positive. Net to net. 

32 Electrical Cable & Wires Set. Net to net. 

33 Spring Front Suspension. Net to net. 

34 Automotive Switchs Set. Net to net. 

35 Automotive Bulb (set of 13) Net to net. 

36 Automotive lights (Set of 10) Net to net. 

37 Lock Set with keys. Net to net. 

38 Horn 12 V Dia 90 Net to net. 

39 Tool Kit Set. Net to net. 

40 Needle Bush-Main Housing. Net to net. 

41 Needle Bearing-Crankcase, Front 

Wheel. 

C339 

Net to net. 

42 Needle Bearing Rear Wheel/Hub. Net to net. 

43 Needle Bush JL 188 NRB. Net to net. 

44 Inner Ring-Cluster Gear. Net to net. 

45 Battery 50 AH. Net to net. 

46 Wiper Blade with Arm. Net to net. 

47 Wiper Motor. Net to net. 

48 Wiper Motor Mounting & 

Linkage Assembly. 

Net to net. 

49 Windshield Glass. Net to net. 

50 Voltage Regulator. Net to net. 

51 Side Window Glasses (Set of 2) Net to net. 

52 Rear Window Glass. Net to net 

53 Front Wheel Hub. Net to net. 

54 Rear Wheel Hub Net to net. 

55 Differential Cage. Net to net. 

56 Oil Tight Hood Net to net. 

57 Flexible Coupling. Net to net. 

58 Flywheel Mounted Alternator. Net to net. 

59 Starter Motor. Net to net. 

60 Cylinder. Net to net. 

61 Cylinder Head. Net to net. 

62 Piston Assembly. Net to net. 

63 Fuel Injection Eqpt. Net to net. 

64 Flywheel. Net to net. 

65 Feed Pump Net to net. 

1 Non-Alloy steel Plate/Flat 51 Kg. 

2 G.P. Non Alloy Steel Sheet. 5 Kg. 

3 Non Alloy Steel Bars/Rods. 14.8Kg.

C1745 Hermetically sealed 

compressors for airconditioner 

using R 22 

refrigerant gas of 

different capacities 

4 Non Alloy Steel Tube. 40.6Kg. 

5 Bearing FAG 6200.2 ZR. 8 Nos. 

6 Screw/Nut/Bolt/Washer 1.9Kg. 

7 Springs. 11Nos. 

8 Mechanical Seals. 12 Nos. 

9 Hose Assembly with end fittings. 1 No. 

10 PVC/Rubber Grips & Pads. 9 Nos. 

1 No. 1 Components Net to net basis 

except upper and 

lower housing 

2 a) CRNGO Steel upto 3500 Kcal/hr 0.0032 Kg/Kcal 

b) More than 3500 Kcal/hr 0.0024 Kg/Kcal 

3 a) Copper Wire upto 3500 Kcal/hr 0.0005 Kg/Kcal 


4 a) Music Wire Upto 3500 Kcal/hr 0.000016 Kg/Kcal 


5 a) Refrigeration Oil Upto 3500 

Kcal/hr 

0.0003 Kg/Kcal 


6 HR non alloy steel sheet/coils 1.28 Kg/Kg content 

7 EC grade aluminium ingot 1.08 Kg/Kg content 

C1746 Deleted 

C1747 Deleted 

C1748 Deleted 

C1749 Table, Kitchen & other 1 Kg. 

house hold articles made 

of aluminium including 

anodized with or without 

handle irrespective of 

what material handle are 

made of 

rectangular/Square with 

straight edges. 

1 

2 

3 


Aluminium Ingot. 

Aluminium Sheet/Coils. 


Aluminium in export 

product. 



product. 



product. 

In case of anodized export product the purity of inputs allowed i.e. Ingot Sheet/Coils /Circles shall be 

99.7% and above.For other shapes rafer C-22 

C1750 Vaporizer made of 

Aluminium 

1 Kg. 1 Aluminium Ingot. 1.05Kg. 

C1751 Tyre curing press of all 

sizes. 

1 No. 1 Non-Alloy HR Plates. 1.10Kg/Kg contnet in 


2 Components required for the Net to net basis with 


accountability clause. 

(1) Specification/capacity & weight of capital goods along with number is to be indicated in the 

application. 

(2). Net weight of component & sub-assemblies to be imported to be procured indigeneously to be given in 

application. 

(3). Net weightof components & items to be manufactured from each raw material to be imorted is to be 

given in the application. 

(4). Weight of component & items to be manufactured from each indigenous material in export product is 

to be given in the application. 

C340

(5). Weight of component and the item given as per notes 2 to 4 should tally with net weight of capital 

goods to be exported. 

(6). Total weight of each raw material is to be calculated on the basis of net weight given as per note 3 

above plus waste as permitted in the norms for the particular raw material 

C1752 Dry Cell R6 PVC/Paper 

Jacket 16.45gm/pc. 

C1753 Dry Cell R6 Metal Jacket 

18.45gm/pc. 

C1754 Dry Cell R14 Metal 

Jacket 43gm/pc. 


Jacket 85gm/pc. 


Jacket 85.59gm/pc. 

1 No. 1 Manganese Dioxide 

(Electrolytic) 

3.92gms. 

2 Acetylene Black. 0.66gms 

3 Zinc (Battery Grade). 5.665gms. 

4 Graphite Powder 0.002gms. 

5 LDPE 0.395gms. 

6 Tin Plate Electrolytic 0.50gms. 



4.55gms. 

2 Acetylene Black. 0.672gms. 


4 Graphite Powder. 0.002gms. 

5 LDPE. 0.233gms. 

6 Tin Plate Electrolytic. For Bottom 0.5gm 

PMS 5.0 gms. 

7 Mercurry Fre Separator 18Sq.CMS. 



2.60gms. 




5 LDPE 0.8110gms. 

6 Tin Plate Electrolytic For Top 0.875gms 

for Bottom 0.875gms 

PMS 7.053gms. 

7 Natural Manganese Ore 

(Powder) 

4.146gms. 



7.31gms. 



4 Graphite Powder 0.004gms. 


6 Tin Plate Electrolytic. For Top 1.46 gms for 

Bottom 1.57 gms 

PMS 11.62 gms. 


(Powder). 

16.44gms. 



7.31gms. 





6 Tin Plate Electrolytic For Top 1.46 gms 

C341

C1757 Dry Cell Batteries (Paper 

Polyester Jacket) Type D 

(R20) 


(Powder). 

1 No. 1 Zinc Ingot/ Slab (Battery Grade) 

OR 

C342 

Relevant Zinc Alloy 

For Bottom 1.57 gms 

PMS 11.62gms 

16.44gms. 





2 Acetylene Black 1.02 kg/ kg content in 


3 E. Manganese Dioxide 1.02 kg/ kg content in 


4 Metal Top Cover 1.01 No./No. 

5 Metal Bottom Cover 1.01 No./No. 

6 Manganese Ore 1.02 kg/ kg content in 


7 PVC Heat Shrink Tube of 

relevant Dia 

1.02 Mtr./ Mtr. 


product. 

8 Kraft Paper for Tube 1.05 kg/ kg content in 


9 LDPE Granuules 1.05 kg/ kg content in 


10 Polyester Labels in Rolls 1.02 Sq.Mtr./ Sq.Mtr. 


product. 

11 Nickel Plated Brass Caps 1.02 No./No. 

12 Cartons As per packing 

Policy. 

13 Containers As per packing 

Policy. 

14 Misc. items: Ammonium 

Chloride, Rice Starch, Corn 

Starch Lubricant (G.K.L) 

Graphite Powder 


2% of FOB value. 

15 Zinc Oxide 1.015 kg/kg content 


Note : If the application is for Electrolytic Tin Plate in wide Coils in place of Metal Top Cover (import 

item No. 4) or Metal Bottom Cover (import item No. 5) it may be allowed as 1.16 kg/kg content in export 

product in lieu thereof 

C1758 CNC/AMS Vertical 

Machining Centre with 

APC 

1 No. 1 Ball Screw 3 Nos. 

2 Super precision Bearing. 4 Nos. 

3 SIMO Drive with Motor 

OR 

CNC System 

1 Set 

4 SI Top Power Supply. 1 No. 

5 Smart Flux Coupling. 4 Nos. 

6 Encoder 1No. 

7 Switches 4Nos. 

8 LM Guides. 1 No. 

9 Disc. Spring. 1 No. 

Import of component shall be allowed on net to net basis with accountability clause.


Group 

C1760 Power Take-offs/Clutches 

C1761 CRCA Circles of Steel. 

C1762 Agricultural Sprinklers 

mainly made of Brass 

C1763 Coils for Quarts 

Analogue Wrist Watch of 

Caliber 2030/2035. 

C1764 Polyamide-Imide Enamel 

Overcoated Enamelled 

Copper Wire 

1 No. 1 Bearing Taper Roller TPR 32212 2 Nos. 

2 Bearing Ball SR DP Groove 

6206ZZ. 

3 Non-Asbestos Friction Plate 

5878 

C343 

1 No. 

1No. 

4 Floating Plate. 1 No. 

5 Housing. 1 No. 

6 Sliding Sleeve 1No. 

7 HB Plate 1No. 

8 Bearing Retainer 1No. 

9 Hand Lever. 1No. 

10 Operating Yoke. 1No. 

11 Adj. Yoke. 1No. 

12 Driving Ring. 1No. 

13 Toggle Lever. 4 Nos. 

14 Operating Shaft. 1No. 

15 Clutch Shaft. 1No. 

16 Hub Retainer 1No. 

17 Fitting - 60410026 1No. 

18 Fitting - 60410027 1 No. 

19 Lock BRG Retainer 1No. 

20 Lever Link 8 Nos. 

1 MT. 1 Hot Rolled Non-Alloy Steel 

Strips/Wide Coils 

1.30MT. 

2 Cold Rolling Mill Rolls. 1.45Kg. 

3 Rolling Oil 0.40Kg. 

4 Pickling Oil 0.526Kg. 

5 Steel Strapping As per packing 

policy. 

6 VCI/Rusto Paper. As per packing 

policy. 

1 No. 1 Brass Scrap. 1.07Kg/Kg content of 

the Brass in the 


1000 Nos. 

(Weight -235 

gms). 

1 Horological Steel Strip Cold 

rolled 

210 gms 

2 Enamelled magnet copper wire 158 gms 

3 Printed Circuit Board (un 

populated) 

1000 Nos. 

100 Kgs 1 Copper Wire Rod/Cathodes 97.9 Kgs. 

2 Polyamide-Imide Enamel 

containing Solid content of 35% 

to 40%. 

11 kgs. 

C1765 Dacrotised or other 1 Kg. 1 Cold Heading quality steel wire 

rod/wires/bars 

1.128Kg.

equivalent surface coated 

high tensile precision 

fastners Cold/Hot Forged 

Bolts/Screws All varieties. 

C1766 Dacrotised or other 

equivalent surface coated 

high tensile precision 

fastners Cold/Hot Forged 

Nuts All varieties. 

C1767 Disc Springs made of 

Cold Rolled 

(Annealed/unannealed) 

Non Alloy/Alloy Steel. 

C1768 Tips for ball pen Rifills 

C1769 Stick Mixer (with plastic 

body) 

2 Dacromet or other similar 

mateials used for surface coating. 

3 Miscellaneous items: Thread 

Rolling Dies/Knurling Dies(Flat 

Cylinderical), Forming/Cutting 

Tools and Tools and Alloy Steel. 

1 Kg. 1 Cold heading quality Steel wire 

rod/wires/bars. 

2 Dacromet or other similar 

materials used for surface 

coating. 


Taps/Tapnibs Forming/Cutting 

Tools and Tools and Alloy Steel. 

1 Kg. 1 Relevant Grade of Cold Rolled 

Steel Strips/Wide Coils 

C344 

0.03225Kg. 


Value. 

1.20Kg. 

0.02502Kg. 


value. 

1.7 kg 

Ten lakhs 

Nos (182 kg). 

1 Brass Scrap 193.5 kg 

2 Stainless Steel Balls 2.04 kg (102000 

Nos). 

1 No. 3 Sintered Bronze Bush 1 No. 

1 Motor 1 No. 


Note: Only relevant item corresponding to the export product will be allowed for import. 

C1770 Tube Forming Rolls 1 kg 1 Alloy Tool Steel Round Bar 

Conforming to AISI D-3/D-2 or 

equivalent 

C1771 Shock Absorber/ Strut 

(Hydraulic/ Gas) 

C1772 Earth Moving Wheel 

Components, namely, 

Bead Seat Ring, Gutter 

Band Fixed Flange & 

Lock Ring 

C1773 Earth Moving Wheel 

Components, namely, 

Detachable Flange/ Loose 

Flange Centre Band Disc 

& Side Ring 

1 No. 1 Multilip / MI/ Hat/Seal/ Road 

Seal 

2 Mounting Rubber 1 No. 

3 Base Valve Body / Foot valve 

Body/ Cylinder ends 

1 No. 

4 Plunger Rod 1 No. 

5 DU Bush 1 No. 

6 Bump Stop 1 No. 

7 Steel Strip 22 gms 

8 Polyester Elastomer Hytrel 2 gms 

9 Iron Powder 110 gms 

10 Fluorescent Additive Oil 1.59 ml. 


Steel in export 

product 

1 No. 

1 No. 1 HR Section (Rolled Bar) 1.10 kg/kg content in 


1 No. 1 HR Plate 1.20 kg/kg content in 


C1774 Disc Holder/ Guide made 1 kg 1 Copper Cathode and alloying 1.20 kg/kg content in

of copper, nickel and tin 

alloy (ASTM C-97800) 

C1775 Spacer Thrust made of 

30%Glass filled Phenolic 

Moulding Powder 

C1776 Injector (Nozzle holder) 

with Nozzle for diesel 

Engine 

C1777 Suction Valve for 

Compressor 

C1778 Discharge Valve for 

Compressor 

C345 

elements nickel and tin the export product 

1 kgs 1 30% Glass Filled Phenolic 

Moulding Powder 

700 kgs 

(1000 Nos.) 

1 Alloy Steel Bars / Coils to 

Specification AISI M2 

1.05 kgs 

16 kgs 

2 Free Cutting Steel Leaded/Non- 

Leaded Bars/Coils to 

Specification EN1A/SEA 

1010/EN8M 

204 kgs 

3 Spring Steel / Wire in Coil 14.3 kgs 

4 Alloy Steel Bars/ Coils Type 

18Cr N18/SEA 3415/16Mn Cr5 

105 kgs 

5 Spring Dowel Pins Net to net 

1) MISC.ITEMS 

Grinding Wheels/Micro Drills/ 

Letter / Number Inscription 

Punches/ Lopping compound 

(Paste /Powder) 


value 

1 No. 1 Valve Plate 1 Net to net 

2 Spring Plates/Springs 16 (Net to net) 

3 Buffer Plate/ Damping Plate/ 

Synchronising Plate 

2 (Net to net) 

4 JL. Nut (with or without washer) 

Hexagon Nut/ Castle Nut/ Split 

Pin 

5 (Net to net) 

5 Locating Pin/ Parallel Pin 8 (Net to net) 

6 Lift Washer / Guide Ring 5 (Net to net) 

7 Countersunk Bolt/ Centre Stud 1 (Net to net) 

8 Seat 1 (Net to net) 

9 Guard 1 (Net to net) 

10 Locking Device 1 (net to net) 

11 Unloader 1 (Net to net) 

12 Guide Bush 2 (Net to net) 

13 Actuator 1 (Net to net) 

14 Washer 2 (Net to net) 

1 No. 1 Valve Plate 1 (Net to net) 

2 Spring Plates/Springs 12 (Net to net) 

3 Buffer Plate/ Damping Plate/ 

Cusion Plate/ Synchronising 

Plate 

2 Net to net 

4 JL. Nut (with or without washer) 

Hexagon Nut/ Castle Nut/ Split 

Pin 

2 Net to net 

5 Locating Pin/ Parallel Pin 6 Net to net 

6 Lift Washer/ Guide Ring 5 Net to net 

7 Countersunk Bolt/ Centre Stud 1 (Net to net) 

8 Seat 1 (Net to net)

C1779 Wheel Chair 

Components made out of 

Aluminium Extrusions 

frames/ cross bar / arm 

rest/ leg rest 

C1780 Magnet Retrieving 

C1781 Magnetic Tray 

C1782 Bi-Metallic Dial 

thermometer/ Mercury in 

Dial thermometer 

C1783 CNC Lathe 

C1784 Pest Repellent Model 

POBD-1-01 

9 Guard 1 (Net to net) 

10 Locking Device 1 (Net to net) 

11 Washer 2 (Net to net) 

1 kg 1 Aluminium Extruded Tubes/ 

Sections of relevant Size 

1 kg 

2 Aluminium Alloy Wire 0.02 kg 


Ferrite Grade in relevant 

demagnetized condition as 

component in relevant 

dimensions 

OR 

Permanent Magnet Strontium 

Ferrite Grade in demagnetized 

condition as Raw material 



condition as component in 

relevant dimensions 

OR 

Permanent Magnet Strontium 


condition as Raw material 

C346 

Net to net. 

1.02 kg/ kg content of 

Magnet in the export 

product. 

Net to net 


Magnet in the export 

product. 

1 No. 1 Nickel Iron Alloy Bi-Metal Strip 1.02 kg/kg content in 


2 Seamless Capillary Steel Tube 

OD 2 mm 

3 SPDT Microswitch Net to net 



4 Mercurry 1 gm /gm content in 


1 No. 1 Ball Screws 2 Nos. 

2 Power Operated Chuck 1 No. 

3 Power chucking cylinder 1 No. 

4 Stabilised Power supply 1 No. 

5 Bearings with SKF or equivalent 

No. 

Net to net 

6 Couplings 2 Nos. 

7 Numerical Control System 1 No. 

8 Encoders 2 Nos. 

9 Connector 2 Nos. 

10 Push Button Actuator 13 Nos. 

11 Elements 13 Nos. 

12 Safety Interlock 1 No. 

13 Motor Protection Starter 10 Nos. 

1 No. 1 Relevant Capacitor Net to net 

2 Relevant Varistor Net to net 

3 Relevant Triac Net to net 

4 Relevant Resistors Net to net 

5 Zinner 1 No. (Net to net)

C1785 Ferro Boron Cored Wire 

C1786 Steel Rolls for Cold 

Rolling Mill (2-Hi, 4-Hi, 

6-Hi) 

C1787 Absorption Chillers of 

Various types (weight 

tobe indicated) 

C1788 Electric Generator and 

sub-assemblies thereof 

1 kg (content 

of both 

inputs to be 

declared) 

6 Light Connector 1 No. (Net to net) 

7 EL Display 1 No. (Net to net) 

8 Polycarbonate Compound 1.05 kg/kg content in 


9 Copper Wire (Super Enamelled) 0.17 kg/kg content in 


10 Copper Clad Laminates 1.01 kg/kg content in 


11 Imaging/ Photo Printing Dry 

Film Photo resists 

12 Solder Mask Ink-cum-Catalyst/ 

Hardner 

13 Relevant Microchip 1 No. 

C347 





1 Ferro Boron Powder 1.05 kg/kg content of 

Ferro Boron in the 


2 CRCA Steel Strips 1.01 kg/kg content of 

Steel in the export 

product 

1 kg 1 Alloy Tools Steel Round Bar 

conforming to AISI D3/D2 

1.40 kg 

1 No. 1 Lithium Bromide Net to net basis (for 

use as first charge) 

2 BQ Plate 1.10 kg/kg content in 


3 Copper Tube of relevant size Net to net basis 

4 Cupro-nickel tube of Relevant 

size 

Net to net basis 

5 Stainless Steel tube of relevant 

grade and relevant size 

Net to net basis 

6 Absorbent Pump Net to net basis 

7 Welding consumable and 

cladding strip 

Cif value restricted to 


8 ICAM Systems Net to net basis 

9 Refrigerant Pump Net to net basis 

10 Burner 1 No. 

11 Purge Pump 1 No. 

12 Sight Glass Net to net. 

13 Sight Glass packing Net to net. 

14 Plug Net to net. 


16 Relay Base Net to net. 


18 Flow Switch 1 No. 

1 No. 1 Copper Wire/Rod 1.01 kg/kg content in 


2 Copper Flat/Strip/Bar 1.05 kg/kg content in 

the export product

C1789 Vertical and/or 

Horizontal Pressure Leaf 

Filter with Accessories 

C1790 Copper Lug (Battery 

cable lug) 

C1791 Bueno Toner cartridge 

for photo copier 

C1792 Carburetor Assembly 

3 Copper Plate 1.10 kg/kg content in 


4 CRNGO Steel Sheet for Rotor 1.30 kg/kg content in 


5 Insulation material (cut to length) 1.03 Sq.Mtr./Sq.Mtr. 


product 

6 Insulation material (in pieces) Net to net basis with 

accountability clause 

7 Non Alloy Steel Plate of relevant 

grade 


Hose Pipe, Hardware, 

Lubrication Oil, Soldering Rod, 

Soldering Foils, sealant, varnish 

& cleaning agent, resin & 

Hardner 

C348 






the FOB value 

1 Unit 1 Woven wire cloth in SS 316L 1.05 Sq.Mtr./Sq.Mtr 


product 

2 Linear Acting Pneumatic Piston 

vibrator 

1 No. on net to net 

basis 

1 No. 1 Copper Scrap 1.10 kg/kg content in 


100 kg toner 

content in 

toner 

cartridge 

1 660 P Viscol 2.95 kg 

2 PE 130 Wax 1.18 kg 

3 Bayoxide 56.64 kg 

4 PSB2700 Resin 56.05 kg 

5 Bontron P51 1.18 kg 

6 Aerosil 0.45 kg 

1 No. 1 Screws Net to net 

2 Needle Jet 1 No. 

3 Inlet Nipple 1 

4 Nipple Net to net 

5 Float Assembly 1 

6 Jet Needle 1 

7 Caps 1 

8 Pilot Air Jets Net to net 

9 Diaphragm Assembly 1 

10 Spring Clip 1 

11 Needle Assembly 1 

12 Pipe Net to net 

13 Plug 1 

14 Pilot Jet 1 

15 Clip Net to net 

16 Rings Net to net

C1793 Aluminium Moulds for 

Plastic Products 

C1794 Enamelled copper wire 

with self bonding enamel 

of less than 0.1 mm 

diameter (not elsewhere 

specified) 

C1795 4 Fibre Single / 

Multimode Optical Fibre 

Armoured Cable Outer 

Dia 12.88 mm or above, 

165 kg/km or above 

consisting of Minimum 3 

PBT tubes of 2.8 mm OD 

or above 







PBT Tubes of 2.8 mm OD 

or Above 







17 Plate 1 

18 Locating Pin Net to net 

19 Washer Net to net 

20 Adjuster 1 

1 No. 1 Aluminium Blocks 1.05 kg/kg content of 


1 kg 1 Copper Rod/ Copper wire dia 0.1 

mm and above 

2 Self Bonding enamel having 

solid content of 10% 

1 km 1 Single Mode/ Multimode Optical 4.2 km 

Fibre 

2 UV Curable Colouring Ink 0.03 kg 

3 Polybutylene Terphthalate (PBT) 4.20 kg 

4 PBT Master Batch 0.11 kg 

5 Thixotropic Filling compound 1.89 kg 

6 Thixotropic Flooding Compound 7.57 kg 

7 HDPE (for Armoured Cable) 87.33 kg 

8 Steel Tape 56.45 kg 

9 FRP 1.05 km 

C349 





value 

10 Water Blocking Tape 33.60 Sq.mtr. 

11 Hot Foil Stamping Tape 1.05 km 

12 Armid Yarn 2.6 kg 

13 Armid Rip Cord 1.08 kg 

1 km 1 Single Mode / Multimode 

Optical Fibre 

12.6 km 




5 Thixotropic Filling compound 2.84 kg 




9 FRP 1.05 km 

10 Water Blocking Tape 33.60 Sq.mtr. 




1 km 1 Single Mode / Multimode 

Optical Fibre 

6.30 km 




5 Thixotropic Filling compound 2.84 kg

PBT Tubes of 2.8 mm OD 

or Above 

C1798 (1) Compact Disk - Audio 

(2) Compact Disk - Vedio 

(3) Compact Disk - ROM 




9 FRP 1.05 km 

10 Water Blocking Tape 33.60 Sq.mtr 




10000 Nos. A. RAW MATERIAL FOR CD 

1 Polycarbonate 173 kg 

2 Aluminium Target - 20 mm x 

160 mm dia 

OR 

0.1 No. 

3 Gold Target - 20 mm x 160 mm 

dia 

B. CONSUMABLES USED IN 

THE MANUFACTURE OF 

CDS 

0.1 No. 

1 Stamper or Mother Master 1 No. 

2 Mold Mirror 0.02 pair 

3 Graphite Foil 0.1 Nos. 

4 Digital Audio Tap-C60/90 6 Nos. 

5 Magnetic Tape-2394 ft. 6 Nos. 

6 Recording Head 0.25 Nos. 

7 Silver Nitrate 0.2 kg 

8 Nitto Tape 1 meter 

9 Hand Gloves 4 Pairs 

10 Laser Beam Head 0.008 Nos. 

11 Filters 0.01 Nos. 

1 

C. PRINTING RAW 

MATERIALS: 

Printing Ink 1.6 kg 

2 Laquer 1 kg 

3 Process Base 2 Litre 

4 Metallic Clear 2 Litre 

5 Polyglaze White Ink 0.014 litre 

6 Image Ink 0.01 litre 

7 Master Colour for fancy CD & 

Playstation 

1 kg 

8 Mixing Clear (Paint) 2 litre 

9 Screen/ Component for Screen 

making 

40 Nos. 

10 Screen Mesh 0.00128 Sq.meter 

11 Mask 0.333 kg 

12 Screen coating solution 0.02 kg 

13 Screen Adhesive 0.02 kg 

C350

C1799 Filter Cartridge: 

Cylindrical Air Intake 

Filter/ Pulse Jet Air 

Filter/ Conical Filter 

Cartridge/ Cylindrical 

14 Screen Stiffner 16 Nos. 

15 Screen Stickers 16 Nos. 

16 Squeegee 40 Nos. 

17 Tray Velvet Sheet 10 Nos. 

18 Graphic Art Film 8 Nos. 

19 UV Lamp 0.1 Nos. 

20 Bulbs for computerized camera 

like Papageno Bulb 

C351 

D. CLEANING AND 

POLISHING MATERIALS: 

0.1 Nos. 

1 Linti Free Paper 200 Nos. 

2 Tissue Paper 200 Nos. 

3 Stamper Polishing Sheet 2 Nos. 

4 Mirror Cleaning Solution 0.02 Litre 

5 Anti Rust Solution 0.4 Litre 

E.STAMPER CLEANING AND 

POLISHING MATERIAL: 

1 Isoproply Alcohol 4 Litre 

2 Acetone 2 Litre 

3 Univitol 4 Litre 

4 Disodium Benzene 0.2 kg 

5 Paladium Chloride 0.2 kg 

6 Nickel Sulphamate Solution 2 kg 

7 Nickel-Chloride Hexahydrate 0.02 kg 

8 Nicket Carbonate 0.2 kg 

F. PACKING MATERIAL: 

1 Jewel Box Digi pack/ CD 

Envelop 

OR 

1) Polystyrene/ P.P. Moulding 

Powder 

2 Tray 

OR 

Net to net 



Net to net 

2 Polystyrene/ Moulding Powder 1.05 kg/kg content in 


3 Inlay Card 

OR 

Net to net 

3 Relevant Paper / Board 1.05 kg/kg 

4 Self Sealing Pouch Net to net 

5 BOPP Tape 2000 Meter 

6 Tear Tape 4000 Meter 

7 Adhesive Tape 10 Rolls 

8 Splicing Tape 1 Meter 

1 Number 1 Relevant Filter paper 1.02 kg/kg content in 

the export product

Filter Cartridge 

C1800 Non-Aerosol Spray 1 Number 1 Relevant Module Sub-Assembly Net to net 

Pump/ dispensers 2 Relevant Actuator Assembly Net to net 

Note: The import of components shall be permitted on net to net basis with accountability clause and the 

type , technical specifications (including part No. if any) etc. of the components sought for import should 

confirm to those utilise in the manufaturer of the resultant product. 

C1801 Dumet wire ( Copper 

tube filled with Alloy 

Steel and Nickel) 

C1802 Stainless Steel Ballpen 

Tips 

C1803 Sulphur Cored Wire 

C1804 Cryocontainer/ Cryoseal 

Container/ Liquid 

Nitrogen Container/A.I 

Equipment/ Cryogenic 

Container Cryoseal 

Liquid Nitrogen 

Container made of 

Aluminium 

C1805 High Speed Steel (Cobalt 

Grade ) End Mills Dia 1 

mm to 20 mm 

C1806 Electrolytic Tinplate 

Waste/waste printed 

/lacquered unprinted 

sheets cut to size for 

making components of 

round tin cans other than 

OTS cans 

C1807 Long Life Lamps ( 0-150 

watts) life 16,000 hours to 

20,000 hours) 

1 kg 1 Nickel Cathodes and / or Nickel 

Pellets - containing approximate 

99.9% (min) Nickel contents 

2 High Conductivity Copper Tube 

containing approximate 99.9% 

(min.) Copper contents 

1 Million 

Number 

1 Stainless Steel Wire dia 2.3 mm 


C352 







2 Tungsten Carbide Balls 1.02 Millions 

3 Cutting Oil, Cleaning Oil- 

Trichloroethylene, Cutting Tools 

1 kg 1 Sulphur Granules S:99% Min. 

Size : 0 to 2 mm 

2 CRCA Steel Strips Grade: EDD 

Width 58 mm 

1 Number 1 Cold Rold Aluminium Sheet in 

Coil & Non Coil Form 


1.015 kg/kg of 

Sulphur Granule 


product 

2 Pallodium Oxide Anhydrous Net to net 

3 Molecular Sleve Net to net 

4 Non Woven Cryogenic 

Insulation Fabric 

1.010 kg/kg of 

CRCA content in 








6 Adhesive - Crest 5% of FOB 

7 Adhesive - Ciba 

8 Consumable (Welding Wire, 

Welding Flux & Welding Rods) 

9 FRP Neck Tubes Net to net 

1 kg 1 High Speed Steel ( Cobalt Grade) 

in the form of Coils/ Bars/Rods 

of Diameter 7 mm to 23 mm 

1 kg 1 Unprinted /Unlaquered 

Electrolytic Tinplate 

Waste/Waste Coil/Sheet 

1000 

Numbers 

1.50 kg 

1 kg 

1 90% Krypton Gas Bal Nitrogen 116 Litres at 1 Bar or 

0.58 Litre at 200 Bar 

2 Glass Shells/ Glass Envelopes 1100 No. 

3 Brass Caps 1010 Numbers 

4 B 701 Halogen Tungsten Wire ( 910 Mtrs

C1808 Dish Ends (Ellipsoidal or 

Circular Shape) made of 

Non-Alloy Steel Plates 

C1809 Zinc Builders Hardware 

Lacquered/ Powder 

Coated (T/C Pressure Die 

Cast & Zinc Alloy 

conforming to Z-3/Z-5 

specification) 

C353 

upto 30 mg) 

5 Lead in wire (Ballotiny filled) 1010 Numbers 

6 Getter (P3L5) 0.045 Litres 

7 K 18 Lamp Copping Cement 1.55 kg 

8 Getter (ALZR) 0.030 Litres 

9 Marking Ink 8.750 Grams 

1 kg 1 Non-Alloy Steel Plates SA 

516/515 

1 MT 1 Zinc Ingot 

OR 

Relevant Zinc Alloy 


Steel Plate in the 


2 Cylinders with or without key (s) Net to net 

3 Plastic Chips for plastic 

component such as washers key 

holders etc. Polyamite 66/ Nylon 

66/ Polyamide 6/ Nylon 6/ 

Polyacetal/ Delrin/ 

Polyoxymethylene 

4 Machine Screws Net to net 

5 (a)Berlaclear CT Laquer OR 

Albrilac HB (for Electrophoretic 

Lacquer)/ Polyester Powder for 

coating 

(b) Solvent for Electrophoretic 

Lacquer 

(c) Rinse additive for 

Electrophoretic Lacquer 

6 Abrasive Belt 50 mm X 3500 

mm for grinding 

7 Abrasive Belt 150 mm X 2000 

mm for grinding 

8 Liquid polishing compound for 

polishing Rough Finish 

9 Trichloro Ethylene for 

degreasing 

10 Bar Polishing compound Final 

Finish (Pre-polishing compound, 

polishing compound Finshing 

compound) 

11 Polishing Buffs (Pre polishing 

Buffs, Polishing Buffs, Finishing 

Buffs) 

12 Plastic Vibratory Media 


Zinc in export 

product 






4% of FOB of export. 

Note: 1. CIF value for import item Nos. 6 to 12 shall be limited to 4% of FOB value of export. 

C1810 Scalpel (Surgical Blade 

with Plastic handle & 

1 No. (7.75 

gms.) 

1 Cold Rolled Bright Finish 

Surgical Stainless Steel Strips 

1.687 gms. 

cover) 

2 Polypropylene/ High Impact 

Polystyrene (HIPS)/ Acrylonitril 

Butadiene Styrene (ABS) 

7.35 gms. 

3 Medical Paper As per packing 

Policy. 

C1811 Harrow Disc Notched 1 kg 1 Alloy/ Non Alloy Steel Billets 1.45 kg

C1812 Lacquered Tin Free Steel 

Sheet 

C1813 S.S. Perforated Apron for 

Tea Industry 

C1814 Embossed Sheets of Cold 

Rolled Non-Alloy Steel 

C1815 Wax Impregnated 

Carbon Electrodes for 

Dry Cell Battery 

C1816 Lead Cored Wire from 

Lead Ingots 

C1817 Aluminium Steam 

Sterilizer - Double Racks 

(pressure cooker type) 

C1818 Polyesterimide Enameled 

copper wire/ strip 

C1819 CNC Bushing C-1-1/2 

Type 

C1820 Tapping Chucks WF 1 

IKP 

C1821 Adapter Housing WEN 

120 B.60 

C1822 Two Cubic Meter 

Standard bucket Wheel 

loader 

C1823 Hydraulic Excavator 

1 kg 1 Tin Free Steel Sheet 

(Unlacquered) 

1 kg 1 C.R. Stainless Steel Sheets/ Wide 

Coils (AISI 304) 

C354 

0.994 kg 

1.10 kg 

1 kg 1 C.R. Non Alloy Steel Sheets/ 

Wide Coil Bright finish of 


1.02 kg 

1 kg 1 Low Ash Metallurgical Coke 260 gms. (Inclusive 

of 5% wastage) 

2 Amorphous Graphite 395 gms. (Inclusive 

of 5% wastage). 

3 Pure White Paraffin Wax 

(Melting point 60-63 Degree C) 

105 gms. (Inclusive 


4 Coal Tar Pitch (V.M. 50%) 400 gms. (Inclusive 


5 Natural Crystalline Graphite 85 gms. (Inclusive of 

5% wastage). 

1 kg 1 Lead Ingots 1.02 kg/ kg content in 


2 CRCA Steel Strip 1.01 kg/ kg content in 


1 No. 1 Aluminium Circles, Commercial 

Grade 



1 kg 1 Copper Wire Rod/ Cathode 1.01 kg/ kg content in 


2 Polyesterimide Enamels 1.01 kg/ kg content in 


1 No. 1 Alloy Steel Round/ Bars 2 kg/ kg content in 


1 No. 1 Alloy Steel Round/ Bars 2.82 kg/ kg content in 


1 No. 1 Alloy Steel Round/ Bars 3.06 kg/ kg content in 


1 No. 1 Reversing Transmission 1 No. 

2 Control Valve (Hydraulic Valve) 1 No. 

3 T.R. Bearing 1 No. 

4 Digital Hourmeter 1 No. 

5 Front Drive Rigid Axle 1 No. 

6 Rear Drive Rigid Axle 1 No. 

1 No. 1 Control Valve 1 No. 

2 Swing Bearing 1 No. 

3 Pilot Valve 3 Nos. 

4 FC Valve 1 No. 

5 Seal Group 2 Nos. 

6 Pump 1 No. 

7 TR Chain 2 Nos. 

8 Other Relevant Component As per GN4. 

9 Liquid adhesive The quantity of 

import item No. 9 to

10 Calking 

11 Sealant 

C355 

11 may be allowed 

within 1% of FOB 

value. 

12 Welding Wire 2% of the weight of 

Steel to be welded. 

13 Steel Tube 1 Mtr./Mtr. content in 


14 CDS Tube 1 Mtr./Mtr. content in 


15 Hose 1 Mtr./Mtr. content in 


16 Steel Plate of relevant grade 1.1 kg/kg content in 


Note: 1. The quantity of import item Nos. 9 to 11 may be allowed within 1% of FOB value. 

C1824 Lead Cored Wire 1 kg 1 Lead Ingots 1.02 kg/kg content in 


2 CRCA Steel Strips 1.01 kg/kg content in 


C1825 Frame Assembly 

(Exhaust frame for Steam 

Turbine Generator) 

C1826 LPG Storage Bullets/ 

Tanks 

C1827 Kerosene Wick Stove and 

its parts 

1 No. ( 34.4 

MT) 

1 Non Alloy Steel Plates 1.20 kg/kg content in 


2 Relevant Steel Forgings/ 

Components Flanges, Rings, 

Segmental Rings, Bars 

Net to net 

3 Stainless Steel Sheets/ Plates 1.05 kg/kg content in 


4 Relevant Castings Net to net 

5 Relevant 

Studs/Nuts/Bolts/Screws /Pins/ 

Dowels 

Adapters/Connectors/Washer 

Springs 

Net to net 

6 Gaskets Net to net 

7 Wire Inserts Net to net 

8 Insulation Material 1.02 Sq.Mtr./Sq.Mtr. 


product 

9 Insulation Paper 1.02 Sq.Mtr./Sq.Mtr. 


product 

10 Welding Electrodes/ Wires (In 

Straight Lengths/Coils/Spools) 

2% of net weight of 

Steel to be welded 

11 Welding Flux 0.5% of net weight of 

Steel to be welded 

1 No. 1 B.Q. Plates 1.05 kg/ kg content in 


1 No. 1 CRCA Non Alloy Steel Sheet 1.10 kg/kg content in 


2 Nickel Anode 0.97% of the weight 

of components to be 

nickel plated. 

3 Paper Board for corrugated boxes As per packing 

Policy. 

C1828 Radiators for 1 No. 1 Stainless Steel Sheet/ Coils 1.05 kg/ kg content in

transformer made of 


2 Welding Wires / Rods, Seam 

Welding Electrodes / Wheels 

C356 


1% of weight of Steel 

to be welded 

3 Absorb Bag Net to net as per 

packing policy 

Note: In the case of coated/ painted radiator, whether internally or externally coated, relevant coating/ 

painting material may be allowed on actual requirment basis upto 4% of the FOB value of exports. 

C1829 Aircooler with/without 

Trolley 

C1830 Hot Rolled Non-alloy 

Steel Strips/ Slit Coils in 

pickled and oiled 

condition 

C1831 Aluminium Pressure 

Cooker 

C1832 Chrome/ Nickle Plated 

Wire Wheel for all types 

of cars 

1 No. 1 ABS/HIPS 1.05 kg/ kg content in 


2 PVC Compound 1.05 kg/ kg content in 


3 Nitrile Rubber compound 1.05 kg/ kg content in 


4 Relevant Gear Motor/ Swing 

Motor 

1 No. 

5 Relevant Main Motor 1 No. 

6 Relevant Pump Motor Net to net. 

7 Expanded Polystyrene 1.05 kg/kg content in 


8 Cellulose impregnated 

corrugated paper cartons 

1 kg/ kg content in 


9 Polypropylene 1.05 kg/ kg content in 


10 Relevant Capacitor 1 No. 

11 Relevant Switches 2 Nos. 

12 Kraft Paper As per packing 

policy. 

13 Kraft Paper/EPS 1.05 kgs/kg content 


14 HIPS 1.05 kgs/kg content 


15 Polycarbonate 1.05 kgs/kg content 


1 kg 1 Hot Rolled Non-alloy Steel Wide 1.02 kg 

Coils in un-pickled and un-oiled 

condition 

1 No. 1 Aluminium Alloy Circles 

(commercial grade) 



1 No. 1 HR Sheet/Wide Coil for RIM 1.19 kg/ kg in the 


2 Billets for shell 2.5 kg/ kg in the 


3 Wire for spokes 1.07 kg/ kg in the 


4 Nipple Wire 1.42 kg/ kg in the 


5 Nickel 0.30 kg/per No. of 


6 Sealant 0.30 kg/per No. of 


7 Brightener 0.15 kg/ No. of 


8 Plating Chemicals CIF value limited

C1833 Deleted 

C1834 Telephone Cable of 

relevant size (pairs) 

having copper conductor 

- 0.5mm dia 




- 0.65mm dia 




- 0.90mm dia 

C1837 D.C. Motors 

C1838 Master Cylinder Assy. 

1 km As per Engineering Table No. 

9(1) 

1 Km As per Engineering Table No. 

9(2) 

1 Km As per Engineering Table No. 

9(3) 

1 No. 1 Relevant Cold Rolled Steel 

Sheet/ Strip/ Wide Coil 

2 CRNGO Steel Sheet/ Strip/ Wide 

Coil 

3 Trivolthrem/ Triflixel (Nomex/ 

Polyester Film/ Nomex) 

C357 


value. 





1 kg/ kg content in 


4 Copper Wire (Square) Bar/ Rod 1.05 kg/ kg content in 


5 M.S. Plate 1.05 kg/ kg content in 


6 Forging Net to net. 

7 Brass Brush Holder Net to net. 

8 Nomex Aramid Paper Net to net. 

9 Bearings of relevant Type Net to net. 

10 Resigiss Banding Tape Net to net. 

11 Name Plates Net to net. 

1 No. 1 Aluminium Alloy Ingot 1.12 kg/ kg content of 

Aluminium Alloy in 


2 Circlip Net to net. 

3 Seal Net to net. 

4 'O' Ring Net to net. 

5 Plug Protective Net to net. 

6 Plug Protective Net to net. 

7 Plunger Primary Net to net. 


9 Pin Net to net. 

10 Poppet Net to net. 


12 Secondary Plunger Net to net. 

13 Sleeve Net to net. 

14 Spring Net to net. 

15 Seal Net to net.

C1839 Steel Trunks (in CKD 

and SKD condition), with 

accessories/ fittings/ 

hardwares, such as, 

hasps, staples, corners, 

handles, slips, knobs 

fittings side flaps and 

flats 

C1840 Marsh Geophone Strings 

consisting of 12 SM-24 

Basic Elements 

C1841 Marsh Geophone Strings 

consisting of 12 SM-4 

Basic Elements (LD) 

C1842 Copper Bonded/ Coated 

Ground Steel Rods 

C1843 HRC Fuses 

C1844 Chafing Dishes/ Chafers 

(Round Shaped) 

C1845 Chafing Dishes/ Chafers 

(Rectangular Shaped) 

C1846 Waste Coupling for Sink 

C1847 S.S. Vaccum Jugs 

(without Handle & Lid) 

for Coffee/ Tea machines 

16 Spring Net to net. 

17 Retainer Net to net. 

1 kg 1 Carbon Steel/ Mild Steel/ all 

seconds grades/ deffectives/ 

cuttings/ prime sheets/ coils/ 

strips 

OR 

C358 



1 Tin Plate waste/ waste 1.25 kg/ kg content in 


2 Bronze Powder 0.070 kg/ kg of 


3 Suitcase locks, metal fittings 

including combination locks 

1 No. 1 Basic Element SM-24 12 Nos. 

1 No. 1 Basic Element SM-4 12 Nos. 

1 kg 1 Non-Alloy Steel Rounds/ Bars/ 

Wire Rods 


Rods 

Net to net with 







1 No. 1 Brass Strip BS2870 1.10 kg/ kg content in 


2 Copper Strip BS4608 1.10 kg/ kg content in 


3 Silver Plated Copper Strip 1.02 kg/ kg content in 


4 Fire Sheet/ Disc Board 1.10 kg/ kg content in 


1 kg 1 S.S. Sheets/ Wide Coil of 




2 Brass Scrap 1.06 kg/ kg content in 


1 kg 1 S.S. Sheets/ Wide Coil of 






1 No. 1 S.S. Sheets of relevant Grade 1.36 kg/ kg content in 




3 P.P. Moulding Powder/ Granules 1.05 kg/ kg content in 


1 No. 1 S.S. Wide Coil of relevant Grade 1.36 kg/ kg content in 


2 Getter Pills 1 No. 

3 Buffing Wheel As per consumable 

Policy. 


material Policy. 

C1848 Injection Mould with Hot 1 Set 1 Relevant Alloy Steel Flat/ 

Round/ Block 


the export product.

Runner System and 

Temperature Controller 

C1849 Vibratory Cutlery 

Polisher 

2 Hot Nozzle Flat Net to net (set) 

3 Temperature Control System Net to net (set) 

1 No. 1 Relevant Motovib (Vibration 

Motor) 

2 Relevant Variable Frequency 

Drive 

C359 

Net to net. 

Net to net. 

3 Relevant Energy Regulator Net to net. 

4 Relevant UV Lamp Net to net. 

5 Relevant UV Choke Net to net. 

6 Relevant Noise Filter Net to net. 

7 Relevant Gas Filled Lifting 

Cylinder 

Net to net. 

8 Polyurethane Elastomer 1.05 kg/ kg content in 


9 Relevant Air Heater Net to net. 

C1850 Synthetic Media Pocket 1 No. 1 Synthetic Non-Woven Filter 

Media of relevant efficiency and 

GSM 

C1851 Electrical Terminals 

(Rail Mounted) 

C1852 Stainless Steel Inner/ 

Outer Ring for Gasket 

C1853 Tube-cut-of-Blades 

(knives) made of High 

Speed Steel Sheet 

C1854 Plate Processor for offset 

printing industry 

1.04 Sq.Mtr./ Sq.Mtr. 


product. 

1 No. 1 Relevant Polymide Powder 1.05 kg/ kg content in 


1 kg 1 Stainless Steel Sheet/ Wide Coil/ 

Strips of relevant grades 

1 kg 1 High Speed Steel Sheet of 






1 No. 1 A.C. Motors Net to net. 

2 Gear Box Net to net. 

3 Speed Controller Net to net. 

4 Float Switch Net to net. 

5 Ball Bearing Net to net. 

6 Spiral Brushes Net to net. 

7 Submersible Pump Net to net. 

8 Blower Motor Net to net. 

9 Photoelectric Switch Net to net. 

10 Centrifugal Magnetic Pump Net to net. 

11 Temperature Controller Net to net. 

12 Visual Programmable Logic 

Controller 

Net to net. 

13 Bellows Pump Net to net. 

14 Magnetic Switch Net to net. 

15 Noise Filter Net to net. 

16 Solenoid Valve Net to net. 

17 Heater for Dryer Net to net. 

18 Cartridge Heater Net to net. 


20 Socket Net to net. 

21 Main Switch Net to net.




0.398/ 0.4mm dia 




0.89/ 0.90mm dia 

C1857 Copper Sleeves (of High 

Conductivity 99.99% 

Pure Copper) as a 

component of Copper-T 

C1858 Ferro-Molybdenum 

Cored Wire 

C1859 Aluminium Redrawn 

Alloy Tube/ Pipes 

C1860 Transformer MS Tank/ 

Clamps 

C1861 Circles (Circular Blank/ 

Disc) made of CR Non- 

Alloy Steel Sheets/ Strips/ 

Wide Coils 

C1862 Automobile Radiator 

Parts made of Brass 

C1863 Graphite Cored Wire 

C1864 Automotive Head Lamps, 

Auxiliary Lamps, Work 

22 Thermocouple & Mounting 

Screws 

C360 

Net to net. 

23 Rollers Net to net. 

24 Cable Net to net. 

25 PUC Ball Valves Net to net. 

26 Relevant Stainless Steel Sheet 1.05 kg/ kg content in 


1 Km As per Engineering Table 

No.9(4) 

1 Km As per Engineering Table 

No.9(5) 

1 Kg 1 Seamless Oxygen Free Copper 

Tube (of High Conductivity 

99.99% Pure Copper) 

1 kg 1 Ferro-Molybdenum Granule/ 

Powder 

1.05 kg 

1.015 kg/ kg content 


2 CRCA Steel Strip 1.01 kg/ kg content 

inexport product. 

1 kg 1 Aluminium Extruded Hollow 

Alloy Tubes/ Pipes 

1.02 kg 

1 kg 1 HR Non-Alloy Steel Sheet/ Wide 0.945 kg 

Coil 

2 Polyurethane Epoxy Paint Upto 4% of FOB 


3 Zinc Rich Epoxy Primer 

1 kg 1 Relevant Cold Rolled (including 

CRCA/ CRCA - Skin Passed/ 

Temper Passed) Non-alloy Steel 

Strips/ Wide Coils 

1.16 kg 

2 VCI/ Rusto Paper As per Packing 

Policy. 

3 Steel Strapping As per Packing 

Policy. 

1 kg 1 Brass Sheet 1.05 kg/ kg content in 


2 Brass Pipe 1.01 kg/ kg content in 


3 Brass Rod 1.05 kg/ kg content in 


1 kg 1 Graphite Powder/ Granules 1.015 kg/kg content 

of powder/ granules 


2 CRCA Steel Strips 1.01 kg/kg content of 

CRCA Steel in the 


1 No. 1 Relevant CRCA Steel Sheets/ 

Wide Coils/ Strips 

Lamps, Rubber Body 2 Halogen/ Automotive Lamps 

(Bulbs) 



Net to net.

Lamps for Motor 

Vehicles (with or without 

bulbs) 

C1865 Kapton 0.025mm x 20mm 

width x 500 Meters 

length per Roll 

(Polyamide film in cut 

length) 

C1866 Coblosam 315.64-05 

containing: 

1. Rhodorsil Resin 4085- 

0.027 kg/ Sq.Mtr. 

2. Phlogophite Mica - 

0.17 kg/ Sq.Mtr. 

3. Hiblon Film HH 25-0- 

028 kg/ Sq.Mre. 

4. Siccatif 9602-0.000093 

kg/ Sq.Mtr. 

C1867 Coblosam 315.64-04 

containing: 

1. Rhodorsil Resin 4085- 

0.027 kg/ Sq.Mtr. 

2. Phlogophite Mica - 

0.126 kg/ Sq.Mtr. 

3. Hiblon Film HH 25-0- 

028 kg/ Sq.Mre. 

4. Siccatif 9602-0.000093 

kg/ Sq.Mtr. 

C1868 Electric Storage Water 

Heater 

3 Head Lamp Glass Lenses Net to net. 

4 Bonding Adhesive/ Lacquer 

Thinner/ Epoxy Powder 

C361 

4% of FOB value of 

exports. 

5 Relevant Synthetic Rubber 1.10 kg/kg content in 


6 Relevant Plastic Powder/ 

Granules 

1 Roll 1 Kaneka PI Film "APICAL" Film 

25 AH 1030mm wideth x 

0.025mm Thickness (Polyamide 

film in running length) 

1 Sq. Meter 1 Rhodorsil Resin 4085 55 +/- 5% 

Solid content 







product. 

2 Phlogophite Mica 0.2125 kg/ Sq.Mtr. 


product. 

3 Hiblon Film HH 25 0.028 kg/ Sq.Mtr. 


product. 

4 Siccatif 9602 0.000093 kg/ Sq.Mtr. 


product. 

1 Sq. Meter 1 Rhodorsil Resin 4085 55 +/- 5% 

Solid content 



product. 

2 Phlogophite Mica 0.1575 kg/ Sq.Mtr. 


product. 

3 Hiblon Film HH 25 0.028 kg/ Sq.Mtr. 


product. 

4 Siccatif 9602 0.000093 kg/ Sq.Mtr. 


product. 

1 No. 1 Polypropylene Granules 1.05 kg/kg content in 


2 Heating Element 1 No. 

3 Polyol Resin 0.408 kg/ kg of PU 

Foam contained in 


4 Isocyanate Hardner 0.612 kg/ kg of PU 

Foam contained in 



6 Safety Valve 1 No. 

7 M.S. Sheet/ Wide Coil/ Strips of 




8 Nut & Bolt Net to net. 

9 Copper Sheet 1.02 kg/kg content in 


10 S.S. Sheet/ Wide Coil/ Strips of 


C1869 Auto Control Cable for 1 kg 1 Galvanised Steel Wire of 

relevant dia 




the export product.

seat applications 

C1870 Auto Control Cable ASM 

Hood Cable 

C1871 Deleted 

C1872 Empty Recessed 

Fluorescent fitting 

complete with 

Aluminium Louver 

C1873 Portable Electro 

Mechanical Power Tools 

2 Zinc Alloy Ingot (Z-5) 1.05 kg/kg content in 


3 HDPE/ PP Granules 1 kg/kg content in the 


1 kg 1 Galvanised Steel wire of relevant 

dia 

C362 



1 No. 1 Relevant Aluminium Sheet 1.02 kg/kg content in 


1 No. Raw Materials: 

1 CRNGO Steel Sheet/ Strip/ Wide 

Coil 

2 Copper Wire Rods 





3 Nylon 1 kg/kg content in the 


4 Araldite 

Components: 


export. 

1 Commutator 1 No. 


3 Gear & Pinion 1 No. 

4 Bearings Net to net. 

5 Cable 1 No. 

6 Chuck & Key 1 No. 

7 Brush Holder 2 No. 

8 Brush Spring 2 No. 

9 Fixed Ratchet 1 No. 

10 Moving Ratchet 1 No. 

11 Inner Clamp Washer 1 No. 

12 Outer Clamp Washer 1 No. 

Note : Components are to be accounted for in the export products. 

C1874 Diesel Fork Lift 1.5 Ton 1 No. 1 Relevant Engine - 3 to 6 Cylinder Net to net. 

to 10 Ton 

2 Forks 800mm to 2500mm 

(relevant) 

Net to net. 

3 Torque Converter Net to net. 

4 Hydraulic valve 2/3/4 Spool 

Valve 

Net to net. 

5 Relevant 1 Beam 4" to 6" 

(2300mm to 2800mm) 

Net to net. 

6 C Channel 4" to 6" (2300mm to 

2800mm) 

Net to net. 

7 Selector disc (Inner + Outer) Net to net. 

8 Bumper Bar/ Carriage Section Net to net. 

9 Brake Assembly Net to net. 

10 Lift Cylinders Net to net.

C1875 Cast Article made of Zinc 

Alloy 

C1876 Roto Glydring made of 

Glass filled PTFE Tube 

C1877 Vacuum Cleaner 

C1878 Automotive Wheel 

(Diameters from 12"- 

17") without tyres 

C1879 Deleted 

C1880 Welding accessories, such 

as, Electrode holder, 

chipping hammer, cable 

connector, earth clamp, 

ground clamp, cable ring, 

splicer hammer 

11 Tilt Cylinders Net to net. 

12 Steering Cylinder Net to net. 

13 Steering Unit Net to net. 

14 Tyres - 6*10 to 9*20 Net to net. 

15 Wheel Rims 6*10 to 9*20 Net to net. 

16 Seat Net to net. 

17 Bearing (Roller/ Taper) Net to net. 

18 Battery 12 V BOAH to 12V 120 

AH 

C363 

Net to net. 

19 Drive Axle Net to net. 

20 Transmission Pump Net to net. 

21 Hydraulic Pump Net to net. 

22 M.S. Sheets/ Wide Coils/ Plates 1.05 kg/kg content in 


1 kg 1 Relevant Zinc Alloy Ingot 1.06 kg/kg 

1 Foot 1 Cluster of PTFE with glass filled 

tube 

1.6 Feet 

1 No. 1 ABS 1.05 kg/kg content in 




3 Polycarbonate 1.05 kg/kg content in 


4 Motor Net to net. 

5 Switches Net to net. 

6 PP Spun Bag Net to net. 

7 Main Cord Net to net. 

8 Filter Motor protect Net to net. 


10 Packing material As per packing 

policy. 

1 No. 1 HR Sheet/ Wide Coil of relevant 

Grade of Steel 


HR Sheet/wide coil 

of relevant grade of 

steel in the export 

prodcut. 

1 No. 1 Brass Scrap 1.075 kg/kg content 


2 Synthetic Rubber 1.10 kg/kg content in 


3 Non Alloy Steel Wide Coils/ 

Steels 



4 Polypropylene - Plastic Resin 1.05 kg/kg content in 


5 Fiber Glass 1.05 kg/kg content in 


6 Nylon Resin 1.05 kg/kg content in 

the export product.

Note: Description of the specific welding accessory shall be indicated by the exporter in the application. 

C1881 1 Inkjet Cartridges 1 No. 1 Relevant Ink 1.17 ML per ML Ink 


product. 

2 Cleaning Solution 60 ML 

C1882 Asbestos Moulded 

Metallic Brake Lining 

C1883 Asbestos Moulded 

Metallic Clutch Facing 

C1884 Seamless Steel Casing 

and Tubing 

C1885 Water Cooler 

3 Unused Empty inject Electronic 

Cartridge 

Net to net. 

4 Lid 1 Unit 

5 Blue Tape 114 mm 


2 Asbestos raw in different grades/ 0.60 kg 

Asbestos Yarn 

OR 

Asbestos Yarn with Metallic 

Insertion 

0.70 kg 





Adhesive 







2 Asbestos raw in different grades/ 0.60 kg 

Asbestos Yarn 

OR 

Asbestos Yarn with Metallic 

Insertion 

0.70 kg 





Adhesive 






1 kg 1 Alloy/Non Alloy Steel Bilets/ 

Rounds of relevant grade 

1 No. 

(Export 

weight to be 

indicated) 

C364 



export. 







1.25 kg 

2 Thread Protectors Net to net. 

3 Thread Inserts/ Cut-Off Blades Upto 2% of FOB 

1 Stainless Steel Sheet/ Wide Coil 


2 Galvanised Plain Steel Sheet/ 

Wide Coil 

3 Copper Tube of relevant 

dimension 







4 Aluminium Sheet 1.02 kg/kg content in 


5 Isocyanate 0.525 kg/kg content

C1886 Zinc Concentrates 

C365 


6 Polyol 0.525 kg/kg content 


7 Hermetically Sealed Compressor Net to net. 

1 MT 1 Special Gelatine Based Water 

Resistant Slurry Explosive 

2 Amonium Nitrate Based Water 

Resistant Slurry explosive 

0.0905 kg 

4.5255 kg 

3 Other Explosive 1.9395 kg 

4 Water Resistant Detonating Fuse 

and Cord Relays 

1.3964 Mtr. 

5 Electric Detonators 1.1637 No. 

6 Non-Electric Detonators 0.181 No. 

7 Drill Rods 0.0776 No. 

8 Drill Accessories 0.0336 No. 

9 Assortment of Consumables 1 Lot 

10 Copper Sulphate 3.879 kg 

11 Zinc Sulphate 3.879 kg 

12 Sodium Cyanide 0.4008 kg 

13 Xanthates 0.4526 kg 

14 MIBC 0.931 kg 

15 High Chrome Grinding Media 6.9176 kg 

16 Hydrated Lime (Chemical 

Grade) 

C1887 Single/Double Walled 

Steel Tubes (Copper 

Coated) 2 Copper Anodes (Electrolytic 

Grade) 

C1888 Ball Pen Tips of Nickel 

Silver Wire 

1.384 kg 

1kg 1 CRCA Strips 1.07 kg/kg content in 


1.0 Million 

Numbers 

(176.4 kg) 

1 Nickel Silver Wire Dia 2.3 mm 






2 Tungsten Carbide Balls 1.02 million Nos. 

C1889 Carbon Electrode 1 kg 1 Copper Cathode 1.07 kg/kg content in 


C1890 Copper Bus Bars 1 kg 1 Copper Cathode/ Copper Wire 

Bar / Cast Copper Rod 

OR 

1.05 kg 


C1891 Radiator made of 

Aluminium with Plastic 

Tank 

1No. 1 Aluminium Tube 1.02 kg/kg content in 




3 Aluminium Sheet/ Strips 1.03 kg/kg content in 


4 Brazing Flux Up to 5% of FOB 

value 

5 Relevant Plastic Tanks 

OR 

Relevant Plastic Granule 

C1892 Welded Steel Link Chain 1 MT 1 Copper Electrode 2 kg 

Net to net 


tank

C1893 Mica Heating Element 

(electrical heating 

element) 

C1894 Agricultural Tractor 

2 Bandshaw Blade 2 Mtr. 

1 kg 1 Silicon Bonded Micanite/ Heater 

Plate - Electrical insulating 

material 

2 Heating Tape/ Wire- Generate 

Heat by current 

3 Aluminized Steel Sheet - 

resistance to corrosion under 

high heat 

4 Receptacle/ Terminal connection 

between cable and end point 

1 No. A. Assembly/ Sub-Assembly/ 

Components: 

C366 







Net to net. 

1 Air Compressor Net to net. 

2 Air/Fuel/ Oil Filter Net to net. 

3 Automotive Battery Net to net. 

4 Bearing (All types other than 

Engine Bearings) such as ball 

bearings and Taper/ Cylindrical/ 

Needle Roller Bearings 

Net to net. 

5 Brake Assembly (Primary/ 

Secondary) or components 

thereof 

Net to net. 

6 Cab Assembly or components 

thereof 

Net to net. 

7 Clutch Assembly (including 

Split/ Torgue Type) or 


Net to net. 

8 Coupler Net to net. 

9 Electical Equipment such as 

Alternator, Starter Motor, 

Dynamo, Regulator, Horns and 

Circuit Breakers 

Net to net. 

10 Electrical Switches/ Auto Lamps Net to net. 

11 IC Engine (Complete) or 


Net to net. 

12 V Belt and Pulley Net to net. 

13 Fuel Tank Net to net. 

14 Front Axle Support Net to net. 

15 Front Axle (2 Wheel Drive/ 4 

Wheel Drive) including Sleeves, 

Spline shaft 

Net to net. 

16 Hydraulic Pump (including 

Auxiliary Hydraulic Pump) 

Net to net. 

17 Hoses Net to net. 

18 Hydraulic Cylinder/ Hydraulic 

Valves 

Net to net. 

19 Hardware items such as Nuts, 

Bolts, Pins, Washers, Spacers, 

Shims, Drain Plugs 

Net to net. 

20 Hood/ Bonnet Net to net. 

21 Instrument Cluster Net to net. 

22 Oil Seals/ O-Rings Net to net. 

23 Oil Pump Net to net.

24 Power Stearing Unit or 


C367 

Net to net. 

25 Power Lift Complete Net to net. 

26 Radiator Net to net. 

27 Safety Equipment: 

a) Mechanical (Rops, Safety 

Belt) 

b) Electrical (Safety Neutral 

Switches Safety Belt Indicator 

Switches) 

Net to net. 

28 Seat Assembly Net to net. 

29 Silencer Net to net. 

30 Tyre/ Tubes Net to net. 

31 Wheel Rims Net to net. 

32 Transmission complete 

(consstant mesh/ synchro/ 

shuttle/ creeper) or components 

thereof 

Net to net. 

33 Three Point Linkages (Front/ 

Rear) 

Net to net. 

34 Turbo-Charger Net to net. 

35 Water Pump or components 

thereof 

36 Wiring Harness including Plug 

Socket 

B. Raw Material: 

Net to net. 

Net to net. 



2 Alloy Steel Rods/ Rounds/ 

Billets 

3 Hot Rolled/ Cold Rolled (Sheets/ 

Coils) 





4 Terne Coated Steel Sheets 1.05 kg/kg content in 


5 Plastic/ Nylon Formulation in 

granules/ Powder form 



Note: Net content of raw material as per SION shall be of the component manufactured out of this raw 

material and shall not include components allowed for import. 

C1895 24" (600mm) complete 

ceiling fan with Metal 

Blades 

C1896 Copper Bowls with Lids 

1 No. 1 Super Enamelled Copper Wire/ 

Clopper Wire Rod of 8 mm 

electrolytic Grade 

0.214 kg 

2 CRNGO Sheet/ Coil 0.5mm 

thickness 

1.381 kg 

3 Aluminium Alloy 0.776 kg 

4 Ball Bearing Oper Closed 6201 

& 6202 or equivalent 

2 Nos. 

5 M.S. Sheet 0.341 kg 

6 Aluminium Sheet/ CRCA Sheet 

(for Blades of fans) 

0.257 kg 


policy. 

1 No. 1 Copper Sheet 1.05 kg/kg content in 


2 Copper Pipe of relevant 1.01 kg/kg content in

C1897 Brazed Wheel Chair 

Components made out of 

Steel Tube/ Section/ 

Profile e.g. Frames/ Cross 

Bar/ Leg Rest/ Arm Rest 

C1898 Forged Safty relief Valve 

for LPG Cylinder made 

of brass 

C1899 E.O.T. Crane 

C1900 Fabricated Articles made 

of SS not elsewhere 

specified 

C1901 High Grade, Annealed 

Sponge Iron Powder 

C1902 Finished/ Semi-Finished 

Ring Joint Gaskets made 

from Non-Alloy Steel 

Plates 

C1903 Hot Rolled Non-Alloy 

Steel Plate/ Sheet/ Strip/ 

Wide Coil 

C368 

Dimensions export product. 

1 kg 1 Steel Tube/ Section/ Profile 0.978 kg 

2 Brazing Wire 0.05 kg 

3 Brazing Flux 0.012 kg 

1 No. 1 Brass Rod Round 1.18 kgs/kg content 


1 No. 1 Relevant Welding Wires 2% of Steel to be 

Welded. 

2 Bearing Taper Roller/ Spherical 

Roller Ball Bearing 

Net to net. 

3 POG 10 D 1024 + FSL Digital 

Tacho Overspeed Switch 

combinatin 

Net to net. 

4 Twist Knot Wire Wheel Brushes 2% of FOB value 

5 DC Grinding Wheel 

6 Relevant Stainless Steel Sheets 1.08 kg/kg content in 


1 kg 1 SS Sheet/ Wide Coil/ Strips of 


1.05 kg 

1 kg 1 Raw (Un-annealed) Sponge Iron 

Powder 

1.01 kg 

1 No. 1 Non Alloy Steel Plates 2.80 kg/kg content in 


1 MT I. Major Inputs comprising of: 

a) Non-Alloy Steel Melting Scrap 175 kg 

b) Low Ash (Ash: 12% max.) Non- 

Coking Coal/ Low Ash (Ash: 

15% max.) Metallurgical Coke 

II. Additive comprising of: 

1100 kg 

a) Low Silica (Silica: 1% Max.) 

Limestone 

195 kg 

b) Bulk Ferro Alloys (Ferro - 

Silicon/ Ferro Manganese/ 

Silico-Manganese 

6 kg 

c) Other Ferro Alloys (Ferro 

Titanium/ Ferro Molybdenum/ 

Ferro Niobium/ Ferro Vanadium/ 

Ferro Nickel/ Ferro Chrome/ 

Charge Chrome Ferro Boron/ 

Ferro Phosphorous) (provided 

the alloying element (s) is/are 

actuallyPresent in the Steel) 

3 kg 

d) Aluminium Bars/ Wires/ Shots/ 

Cubes and/or Powder in Cored 

Wire 

2.25 kg 

e) Calcium Silicide Lumps and/or 

Powder in Cored Wire 

1 kg 

f) Calcined Petroleum Coke 0.4 kg

g) Calcium Carbide based 


C369 

III. Miscellaneous Inputs 


a) Shaped Refractories (Fired/ unfired 

bricks/ shapes) 

2.6 kg 

5 kg 

b) Monolithic Refractories 

(including Castables/ Ramming 

Mass/ Gunning Mixes) 

4 kg 

c) Special Refractories (continuous 

Casting Refractory namely, 

Ladle Shroud, M.B. Stopper, S.E. 

Nozzles/ Slide Gate Refractory/ 

HMD Lances/ LF Lances/ Argon 

Purging Refractories/ Tundish 

Striker Pads/ CeramicStones/ 

Tundish Turbo Stop 

1 kg 

d) CI/Steel Rolls for Hot Strip Mill 1 kg 

e) Celox Inserts/ Oxygen 

Measuring Probes 

0.1 No. 

f) Shear Blades/ Saw Blades 0.01 kg 

g) Ceramic Coated Oxygen Lancing 0.02 No. 

Pipe 

h) Continuous Casting Powder 0.6 kg 

I) Temperature Tips 0.1 Nos 

j) Graphite Electrodes for Ladle 

Furnace 

0.1 kg 

k) Copper Lined Mould for Casting 0.02 kg 

l) Sampler Tips 0.15 Nos. 

m) Rolls for Slab Caster 0.5 kg 

Note: 1. The above norm is applicable only if the export product(s) is/are manufactured through Corex 

Furnace-LD converter route. 

2. The norms shall also be applicable for export of continuously cast steel slabs. However import item 

allowed atSl.No.III(d) shall not be allowed against export of such Slab and the quantity of all other import 

items allowed shall be reduced by 3%. 

3. Maximum quantity of Low Ash Metallurgical Coke allowed against Sl.No.I(b) shall be limited to 20% of 

the totalquantity of 1100 kg. 

C1904 Graphite Heat Exchanger 

(Cubical Block, Shell & 

Tube & Circular Block 

Type) 

1 No. 1 Graphite Block 1.57 kg/kg content in 


2 Graphite Tube 1.37 kg/kg content in 

the export prdouct. 

3 Non Alloy Steel Sheet 1.22 kg/kg content in 


4 Bellows 2 Nos. 

5 Bellow Seal Assembly 1 No. 

6 Gasket 57 Mtrs. 

7 Flame Arrestor 2 Nos. 

8 PRP Blower 2 Nos. 

9 Quartz Glass 1 No. 

10 O Ring 9 Nos. 

11 Spring 5 Nos. 

C1905 Stainless Steel Braided 1 No. 1 S.S. Braided Teflon Hose of 1.02 Mtr./Mtr.

Teflon Hose Assembly for 

automotive application 

C1906 Zinc Plated Liquid Tight 

Steel Fitting with Ferrule 

& Locknut (Connector) - 

Size 1/2" to 4" 

C1907 Decanter Centrifuge 

C1908 Industrial Separator 

C1909 Lightening Arrestor 

(Surge Arrestor) 

Distribution Class 

C370 

relevant dia & grade content in export 

product. 

2 Seamless Steel Tubes of relevant 

dia & grade 

1.02 Mtr./Mtr. 


product. 

3 Hardware Net to net. 

1 No. 1 Alloy/ Non-Alloy Hexagonal 

Steel Bar (For Body & Nut) 

(a) 4 kg/kg content 

for sizes upto 2". 

(b) 5 kg/kg content 

for size above 2". 

2 Ferrules (made of CRCA Sheet) Net to net. 

3 Polypropylene (for Seal) 1.05 kg/kg content. 

4 LDPE Granules (For 'O' Ring) 1.05 kg/kg content. 

5 Nylon-6 (For Insuliner) 1.05 kg/kg content. 

6 H.R. Non-Alloy Steel Coil/ Sheet 3.43 kg/kg content. 

(For Locknut) 

7 Zinc 0.7% of Steel weight 

to be galvanized. 

1 No. 1 H.R.S.S. 316 Plate 6 mm Thick 

for Flight 

2 S.S. 316 Sheet 3 mm Thick for 

casing assembly 


flight of export 

product 


casing assembly of 


3 M.S. Box Section 1.01 kg/kg content in 


4 Alloy Steel Round Bar 3.0 kg/kg content in 


5 S.S. 316 Bar 1.01 kg/kg content in 


6 Consumable including Hard 

Surfacing Power 


7 Component As per General Note 

No. 4 for Engineering 

Product 

1 No. 1 Stainless Steel Sheet of relevant 

grade 



2 S.S. Round Bar of relevant grade 2.70 kg/kg content in 


3 Component As per General Note 

No. 4 for Engg. 

Product inserted by 

Public Notice No. 46 

dated 06.11.2002 

1 No. 1.Tubular Porcelain Bushings 

OR 

Net to Net 

I. Inputs for Tubular prorcelain 

Bushings 

Maximum Quantity = 

KV rating of Arrestor 

x 0.0002 x Inputs of 

A-1804 

II. Aluminium Ingots KV rating of Arrestor 

x 11 gms 

III. Metal Oxide Varistor 

OR 

III Inputs for Metal Oxide 

Varistor 

Nos = KV rating of 

Arrestor divided by 

KV rating of Varistor



Discharge Class I 

C371 

1. Spray Dried Metal Oxide 

Powder 

OR 

1. Metal or Metal Oxide as 

described below 

a. Zinc Oxide 

OR 





a. Zinc Metal 1.10 kg/kg content in 


b. Bismuth Oxide 

OR 



b. Bismuth Metal 1.10 kg/kg content in 


c. Cobalt Oxide 

OR 



c. Cobalt Metal 1.10 kg/kg content in 


d. Nickel Oxide 

OR 



d. Nickel Metal 1.10 kg/kg content in 


e. Antimony Trioxide 1.08 kg/kg content in 


f. Chromium Oxide 1.08 kg/kg content in 


g. Tin Oxide 1.08 kg/kg content in 


h. Manganese Oxide/ Manganese 

Dioxide 

OR 

h. Manganese Metal 

OR 





h. Manganese Carbonate 1.08 kg/kg content in 


i. Polyvinyl Alcohol 0.71 gm/KV 

j. Ammonium Polyacrylate 0.80 gm/KV 

j. Decyl Amine Acetate 0.80 gm/KV 

k.Glass Frit-Silver Oxide 0.63 gm/kv 

1 No. I. Tubular Porcelain Bushings 

OR 

I. Inputs for Tubular Porcelain 

Bushings 

Net to net 



x 0.000744 x Inputof 

A-1804 


x 157 gms 


OR 

III. Input for Metal Oxide 

Varistor 


Powder 

OR 



Nos. = KV rating of 


KV rating of Varistor 


export product



Discharge Class II 

C372 

a. Zinc Oxide 

OR 






OR 





C. Cobalt Oxide 

OR 






OR 












Dioxide 

OR 


OR 





h Manganese carbonate 1.08 kg/kg content in 



j. Ammonium Polyacrylate 

OR 

1.23 gm/KV 


k. Glass Frit-Silver Oxide 0.9 gm/KV 


OR 


Bushings 

Net to net 



x 0.000767 x Inputs 

of A-1804 

II Aluminium Ingots KV rating of Arrestor 

x 141 gms 

III Metal Oxide Varistor 

OR 

Input for Metal Oxide Varistor 

1 Spray Dried Metal Oxide 

Powder 

OR 

Metal or Metal Oxide as 


a. Zinc Oxide 

OR 











OR 


export product



Discharge Class III 

C373 




OR 






OR 












Dioxide 

OR 


OR 









OR 

1.63gm/KV 


k. Glass Frit - Silver Oxide 1.23gm/KV 


OR 


Bushings 

Net to net 

(KV rating of 

Arrestor x 0.000812 

x Inputs of A-1804) 


x 127 gms 

III Metal Oxide Varistor 

OR 



Powder 

OR 


described Below 

a. Zinc Oxide 

OR 

Nos= KV rating of 




export Product 



a Zinc Metal 1.10 kg/kg content in 



OR 






OR 




export Product



Discharge Class IV 

C374 


OR 









g.Tin Oxide 1.08 kg/kg content in 



Dioxide 

OR 


OR 





h. Manganese carbonate 1.08 kg/kg content in 




OR 

2.53 gm/KV 


k. Glass Frit - Silver Oxide 1.93 gm/KV 

1.No. I. Tubular Porcelain Bushings 

OR 


Bushings 

Net to net 


(KV rating of 

Arrestor x 0.000784 

x Inputs of A-1804) 


x 138 gms 


OR 



Powder 

OR 



a. Zinc Oxide 

OR 








a.. Zinc Metal 1.10 kg/kg content in 



OR 






OR 






OR 





e. Antimony Trioxide 1.08 kg/kg content in

C1914 Metal Oxide Varistor ## 

(MOV) Distribution 

Class 

C375 







Dioxide 

OR 


OR 











i. PolyVinyl Alcohol 3.56 gm/KV 


OR 

3.85 gm/KV 



1 No. 1.Spray Dried Metal Oxide 

Powder 

OR 

1.Metal or Metal Oxide as 


a. Zinc Oxide 

OR 








OR 






OR 






OR 












Dioxide 

OR 


OR 








j. Ammonium Polyacrylate 0.80 gm/KV



Class I 



Class II 

C376 

OR 



1 No. 1. Spray Dried Metal Oxide 

Powder 

OR 



a. Zinc Oxide 

OR 








OR 






OR 






OR 







i. Chromium Oxide 1.08 kg/kg content in 


j. Tin Oxide 1.08 kg/kg content in 



Dioxide 

OR 


OR 









OR 

1.23 gm/KV 




Powder 

OR 



a. Zinc Oxide 

OR 



1.08 kg/kgContent in 


a. Zinc Metal 1.10 kg/kgContent in 



OR 



b. Bismuth Metal 1.10 kg/kgContent in 

export product



Class III 

C377 


OR 



c. Cobalt Metal 1.10 kg/kgContent in 



OR 



d. Nickel Metal 1.10 kg/kgContent in 


e. Antimony Trioxide 1.08 kg/kgContent in 


f. Chromium Oxide 1.08 kg/kgContent in 


g. Tin oxide 1.08 kg/kg content in 



Dioxide 

OR 


OR 





h. Manganese carbonate 1.08 kg/kgContent in 




OR 

1.63 gm/KV 




Powder 

OR 



a. Zinc Oxide 

OR 





a. Zinc Metal 1.10 kg/kgContent in 



OR 



b. Bismuth Metal 1.10 kg/kgContent in 



OR 



c. Cobalt Metal 1.10 kg/kgContent in 



OR 



d. Nickel Metal 1.10 kg/kgContent in 


e. Antimony Trioxide 1.08 kg/kgContent in 


f. Chromium Oxide 1.08 kg/kgContent in 


g. Tin Oxide 1.08 kg/kgContent in 



Dioxide 

OR 


export product



Class IV 

C1919 Brake Lining for Motor 

Vehicles with Aramid 

and NBR 

C378 


OR 



h. Manganese carbonate 1.08 kg/kgContent in 




OR 

2.53gm/KV 




Powder 

OR 



a. Zinc Oxide 

OR 








OR 






OR 






OR 












Dioxide 

OR 


OR 







I. Polyvinyl Alcohol 3.56 gm/KV 


OR 

3.85 gm/KV 



1 No. 1 Nitrile Rubber 1.05 kg/kg content in 


2 Brass Chips 1.02 kg/kg content in 


3 Aramid Pulp 1.05 kg/kg content in 


4 Resin (relevant) 1.05 kg/kg content in

C1920 Telephone Cables of 

different pair and Dia 

U/G BSW Cable, Not 

elsewher specified 

C1921 Polyurethane Type Air 

Filters 

C1922 Plastic Air Filters 

C379 


5 Cellulose / Mineral / Glass Fibre 1.05 kg/kg content in 


6 Fellite 1.05 kg/kg content in 


7 Pottassium Titanate 1.05 kg/kg content in 


8 Zinc Oxide 1.05 kg/kg content in 


9 Rubber Accelerator Restricted to 2% of 

the weight of the 

Nitrate Rubber 

1 km 1 Copper in the form of CC rods / 

Wire / Bars EC Grade 



2 HDPE Compound 1.05 kg/kg content in 


3 Filling Jelly 1.01 kg/kg content in 


4 Flooding Jelly 1.01 kg/kg content in 


5 Poly Co Polymer 1.02 kg/kg content in 


6 Aluminium Foil Stock 1.02 kg/kg content in 


7 LDPE Compound 1.05 kg/kg content in 


1 kg. 1 Filter Paper 1.02 kg/kg content in 




3 ISO CYANATE in the ratio of 70:30 

4 Perforated and Expanded Cold 

Rolled Steel Sheet 



5 Hot Melt Polyamide Import Item No. 5&6 

The two altogether be 

restriced up to 2% of 

the FOB value 

6 PP mold Release Agent 

7 Unit Box Import Item No. 7&8 

Will be allowed as 

per packing policy 

8 Multi Carton (5Ply) 

1.kg. 1 Filter Paper 1.03 kg/kg content in 

expot product 


expot product 

3 Rubber Gasket On Net to net basis 

4 Mold Release Agent Import Item No. 4- 

5&6 To be restricted 


value to be allowed 

as per packing policy 

5 Unit Box 

6 Multi Carton 

C1923 1.No. 1 Batteries Net to net

REVA electrically 

operated vehicle (four 

wheeler) 

2 Elecronic Speed Controler Net to net 

3 Solenoid Net to net 

4 Passenger Car Tyre Not to net 

5 DC brushless Battery Fan Net to net 

6 Electric DC Motor Net to net 

7 Plastic Sheets ABS / PMMA 

(poly Methyl metha-acrylate 

8 Plastic Sheets (Raw material) 

ABS 

9 Soft touch (ABS) Acrylonitrile 

Butadiene styrene 

10 Permanent Magnet DC Motors Net to net 

11 Relays Net to net 

12 Watering System for batteries Net to net 

13 Primaire D' Adherence 

38 

C380 

Modular system (electronic part 

of central locking) 







14 Hardener for 52872 Import Item NO. 14- 

15&16 To be allowed 

up to 2% of FOB 

value 

15 Vernis Soft Feel Mat 

16 Hardener 

17 Back Assembly (climate control 

seat) 

Net to net 

18 Cushion Assembly (climate 

control seat) 

Net to net 

19 Controller (climate control seat) Net to net 

20 Controller Interface Cable Net to net 

21 Controller Power Cable Net to net 

22 CD Player with Speakers Net to net 

23 Relays for AC Net to net 

24 Relays for Heaters Net to net 

25 Alloy Wheels Net to net 

26 AC Condensor Fan Net to net 

27 Heater pad for Batteries Net to net 

28 Charging Plug Male Net to net 

29 Charging Plug Female Net to net 

30 Battery Inter connects Net to net 

31 Main Plug Net to net 

32 Battery Harness Net to net 

33 Charger Parts (Anne-2) Net to net 

34 DC_DC Converter Parts (Annex- 

3) 

Net to net 

35 A/C Controller Parts (Annex-4) Net to net 

36 Modular System with micro siren Net to net 

37 Central unit (electronic part of 

central locking) 

Net to net 

Net to net

C1924 Transmission Line Tower 

Hardwares and 

Accessories 

C1925 Metal Halide Lamp 

Double Ended Quartz 

Glass Shell 150 W 

C1926 Metal Halide Lamp 

Double Ended Quartz 

Glass Shell 70 W 

39 Steel Tube round 1.02 kg/kg content in 


40 Steel Tube Square 1.02 kg/kg content in 


41 Steel Sheet 1.04 kg/kg content in 


42 Fasteners Net to net 

43 Flange Net to net 

44 Brackets Net to net 

45 Weldment Net to net 

1 MT 1 a) Aluminium Wires/ Rods 1.01 MT/MT content 


b) Aluminium Alloy Wire/ Rods 1.01 MT/MT content 


2 a) Aluminium Ingots 1.05 MT/MT content 


b) Aluminium Alloy Ingots 

LM6/LM8) 

C381 



3 MS Billets 1.18 MT/MT content 


4 M.S. Round / M.S. Bars/Rods 1.15 MT/MT content 


5 Non Alloy Steel Plates 1.15 MT/MT content 


6 Synthetic Rubber (Grade 

Skyprene B-30/Grade Bayprem) 

7 Neoprene Rubber Bush Net to net 

8 Washers Net to net 

9 Bolts and Nuts Net to net 



10 Zinc 4% of Steel to be 

galvanized 

10,000 Nos. 1 ARC Tube for MH Lamps 150 

W 

10200 Nos. 

2 UV Block Quartz Main Tube 

OVISIL 482/21.7-22.9/19.5-20 

263 kgs 

3 Quartz Tube for Exhaust OVISIL Net to net 

452 3.9-4.1/2.02 

4 Molybdenum Foil 4X0.028 204 Mtrs. 

5 Tam Foil 1X0.049MM 102 Mtrs. 

6 Getter ST 101/DF/50 or Getter 

NGE 101/DF/50 

10200 Nos. 

7 Ceramic Cap-R7S-10ST End 

Caps OR R7S Ceramic Parts 

11000 Nos. 

8 Sauereissen Cement No.13 USA 

Sauereissen No. 13 

14 kgs. 

10,000 Nos 1 ARC Tube for MH Lamps 70 W 10200 Nos. 

2 UV Block Quartz Main Tube 

OVISIL 482/19.5-20.5/17.1-18 

167 kgs 

3 Quartz Tube for Exhaust OVISIL Net to net 

452 3.9-4.1/2.02 

4 Molybdenum Foil 4X0.028 204 Mtrs. 

5 Tantalam Foil 1X0.049 MM 102 Mtrs

C1927 Fabricated Steel 

Hardware/ Structure/ 

Articles not elsewhere 

specified made out of MS 

CR Plates/ Sheets/ Coils/ 

Strips 

C1928 Distribution Type Fuel 

Injection Pump for Diesel 

Engines 

C1929 Hermetically Sealed 

Comressors for 

Refrigerators & 

Commercial 

Refrigeration 

Applications using Ecofriendly 

gases. 

C1930 Zinc Ingots 

6 Getter ST 101/DF/50 or Getter 

NGE 101/DF/50 

C382 

10200 Nos. 

7 Ceramic Cap RX7S 20400 Nos. 

8 Ceramic Cement Sauereissen No. 

13 

21 kgs. 

1. Kg 1 MS CR Sheets/ Coils/ Strips 1.05 kg/kg content in 


2 Zinc Ingot (to be allowed only in 0.05 kg 

case the export product is 

galvanized 

1 No. 1 Relevant Components As per General Note 

No. 4 for Engineering 

Product inserted by 

Public Notice No. 46 

dated 06.11.2002 

2 Honing Tools 3% of FOB value 

3 Grinding Wheel 

4 Drills/Deep Hole Drills 

5 Reamers 

6 Inserts 

7 Honing Tools 

8 Abrasive Brush 

9 Steel Shots 

1 Nos 1 Components Net to net basis 

2 CRNGO Steel Sheets 1.34 kg/kg content in 


3 Copper Wire 1 kg/kg content in 


4 Hot Rolled Non-Alloy Steel 

Sheet/Wide Coil 



5 Polyester Film 1.02 kg/kg content in 


6 Polyester Stator Lacing Cord 1 Mtr / Mtr content in 


7 Flapper Valve Steel 1 kg/kg content in 


8 Copper Tube 1 kg/kg content in 


9 Aluminium Ingot 1 kg/kg content in 


10 PBT/ Duranex 1 kg/kg content in 


11 Refrigeration Oil 1 kg/kg content in 


1 MT 1 Zinc Ash and residue containing 

Zinc in the range of 65-80% 

2 Metallurgical Coke 750 kg 

1.065 MT of Zinc 

metal in Zinc Dross

3 furnace Oil (LSHS)/Light Diesel 

Oil 

C383 

175 kg 

4 LPG 74 kg 

Note : 1. The above norms will be applicable to primary producer using the imperial Smelting 

Technology.Note : 2. The applicant will also furnish clearance from the M/o. Environment and Forest for 

import of Zinc Ash and residues alongwith application for Advance License. 

C1931 Copper / Aluminium 

Conductors screened 

with semi conducting 

compound, XLPE 

Insulated G.I Wire, 

Armoured / Unarmoured 

PVC Sheathed Cable for 

above 1.1 KV. 

C1932 Iron Ore including 

Processed Iron Ore 

C1933 Tungsten Wire (0.525 

mm dia) 

C1934 Molybdenum Wire (0.82 

mm dia 

1 km 1 Continuous Cast Copper Rod/ 

Cathodes/ Wire Bars / Wire Rod 

/ Copper Tape / Copper Foil (EC 

Grade) 



2 Aluminium Ingots Rods 1.01 kg/kg content in 


3 XLPE C ompound/Cross 

Linkable LDPE Compound 


OR 

a) PVC Resin 

b) Plasticizer 

c) Lubricant 

d) Filler material (Calcium 

Carbonate/Alumina/ Kolin 





0.57 kg 

0.11 kg 

0.01 

0.31 kg 

5 Semi Conducting Compound 1.05 kg/kg content in 


1 MT 1 Tricone Rock Roller Bits with 

Nozzle Assembly 


resultant product 

1 kg 1 Ammonium Paratungstate 1.74 Kg./Kg. Export 

of Tungsten Wire 

1 kg 1 Molybdenum Powder 99.5% 

Pure 

1.15 Kg 

2 Graphite Lubricant 0.05 Kg 

C1935 Cast Basalt Liner Pipe 1 kg 1 Basalt Rock 1.1 Kg 

C1936 Ferro Titanium Cored 

Wire 

C1937 Ballpoint Pen Tips made 

of brass 

C1938 Plastic Assembly Fitted 

with Cross Flow Fan, 

Mounting Bracket, 

Stepper Motor and 

Motor 

1 kg (powder 

content) 

1 million 

number (190 

kg.) 

1 Ferro Titanium Powder (Ti-65- 

72%) 



2 CRCA Non-alloy Steel Strips 1.008 kg/kg content 


1 Round Brass Wire 340 kg 

2 Tungsten Carbide Balls 1.02 Million No. 

(1.02 kg) 

3 Cutting Tools, Drill Oil & 

Chemical 


1 No. 1 ABS 6.72 Kg 

2 ABS/AS-30% GF Fiber 896 gm 

3 Motor HHF - 27 BG 83 Net to net 

4 Stepper Motor MP-35-A. Net to net 

5 Rubber Hub 60 x20 L Net to net 

6 Shaft Dia 6 x 35 mm L Net to net 

7 Plastic Bush Dia 6 mm. Net to net 

8 Balance Weights (3 mm/5 

mm/12 mm). 

Net to net 

9 Drain Hose 19 mm Net to net

C1939 Galvanised Steel Tape (10 

mm - 40 mm with) 

C1940 (I) Spring Brake 

Chamber Type-24/30 L/s 

(With two Diaphragms) 

Long Stroke 

(ii) Spring Brake 

Chamber Type - 24/30 

S/S (With two 

Diaphragms) 

(iii) Spring Brake 

Chamber Type - 30/30 

S/S (With two 

Diaphrams) 

C1941 Tapping Adaptor WES 

(Size 1) 

C1942 Tapping Adaptor WES 

(Size 2) 

C1943 Tapping Adaptor WEN 

(Size 1) 

C1944 Tapping Adaptor WE 

(Size 1) 

C1945 Tapping Adaptor WE 

(Size 2) 

C1946 Reversible Tapping 

Chucks TA 12 

C1947 Reversible Tapping 

Chucks TA 20 

C1948 Adaptor Sub-assembly 

WEN 101 BG 

1 kg 1 Non Alloy Steel Wide Coils 1.07 kg/kg content in 


2 Zinc As per Engg. Table 

No. 3. 

1 No. 1 Diaphragms Net to net 

2 Non-Alloy HR/ CR Coil 1.26 kg/kg content in 


3 Aluminium unwrought or 

Plate/Sheet/Strips MS Bar/Road 

4 MS Bar/Rods, Spring wire/ Rod/ 

Bar 

C384 





1 No. 1 Alloy steel rounds/bars 3.39 kg/kg content in 


2 Torque drive Net to net 

3 Plate springs Net to net 



2 Torque drive Net to net 

3 Plate springs Net to net 









2 Circlip Net to net 

3 Deep groove ball bearing Net to net 

4 Shoulder Sleeve bearing Net to net 

5 Shim Net to net 



2 Deep groove ball bearing Net to net 

3 Shoulder Sleeve bearing Net to net 

4 Shim Net to net 

5 Disc./Retaining ring Net to net 



C1949 Portable 

Generator/Internal 

Combustion Engine for 

Portable 

Generator/Pump Set run 3 CRNGO Silicon electrical steel 

sheet 

1 No. 1 One side Zinc Coated Steel Sheet 1.12 kg/kg content in 


2 Terne Sheet 1.12 kg/kg content in 



export product

on Kerosine & Petrol 

4 Electrolytic continuous cast 

coper rod 

5 Hot dipped Aluminium coated 

Steel Sheet 

C385 







Note : Components, if required, may be allowed as per General Note No. 4 for Engg. Product inserted by 

Public Notice No. 46 dated 6.11.2002 

C1950 Anode Slime containing 

Gold and Silver in Black 

powder form 

1 kg 1 Copper Concentrate (Gold and 

Silver Content only) Containing 

Gold and Silver in Blackish Dark 

Green Powder Form 

Gold - 1.015 kg/kg 


product Silver 1.085 

kg/kg content in the 


Note : 1.The gold and silver content in copper concentrate as declared in the import document is to be 

accounted for as per the above SION.Note : 2. The above SION is to allow duty exemption for gold and 

silver only. The copper contained in the concentrate will be cleared by payment of applicable customs 

duty. 

C1951 21 inches Colour Picture 

Tube (CPT) integrated 

with Deflection Yoke. 

C1952 Seismic Cable- Type RSR 

3 Cable double ended, 

165 M long 

C1953 Hermetically sealed 

comprssor Pump Kit 

assembly 

1 No. 1 21 inches Bare Colour Picture 

Tube 

Net to net 

2 EPS As per packing policy 

3 Paper (Kraft) As per packing policy 

1 No. 1 Thermoplastic Polyurethane 1.5 kg/kg content in 


1 No. RAW Material :- 

1 Nitrite Rubber coated steel 

sheet/wide coil 

1.79 kg/kg 

2 Flapper Valve Steel sheet/wide 

coil 

1.18 kg/kg 

3 Relevant Cast iron part castings: 1.16 kg/kg of the cast 

iron part castings 

a) Crankcase 

b) Crankshaft 

c) Outboard Bearing 

d) Valve plate 

e) Cylinder Head 

Components:- 

1 Piston Sintered 1 No. net to net 

2 Connecting Rod 1 No. net to net 

3 Cover Muffler casting 1 No. net to net 

4 Roll Pin 1 No. net to net 

5 Intake valve pin 2 Nos. net to net 

6 Screw Outboard bearing 3 Nos. net to net 

7 Muffler screw 2 Nos. net to net 

8 Screw vylinder head 4 Nos. net to net 

9 Screw Discharge 2 Nos. net to net 

10 Rivet 2 Nos net to net 

C1954 Tube light ballast 18 1 No. 1 Copper Rod 67 grams 

watts & 36 watts 2 Electrical Steel Sheets/Coils 358 grams

weighing 451 grams 

C386 

Grade 400 & above 

3 Contact Pin 2 Nos. on net to net 

basis 

4 Impregnated Lacquer 4% of FOB value 

C1955 Cupro Nickel Tubes 1 kg 1 Cupro Nickel Scrap of relevant 

grade 

C1956 High Chrome Castings & 

Grinding Media Balls for 

iron ore grinding mills 

C1957 LPG R egulator/ 

Coupling in CKD/ 

Assembled Condition 

C1958 Disposable Cylinder 

C1959 Pressure Die Cast/ Sand 

Cast Components/ 

Articles made of 

Aluminum Alloy 

C1960 Lead Alloy in the form of 

: Bar/ Anode/ Ingot/ Slab/ 

1.09 kg 

1 MT 1 a) High Carbon Ferro Chrome 0.847 kg./kg. Cr 


product 

b) Low Carbon Ferro Chrome 

(including Nitrogen bearing LC 

FeCr not exceeding 20% of total 

quantity) 

0.847 kg./kg. Cr 


product 

2 Unwrought Nickel 1.02 kg/.kg. Ni 


product 

3 Ferro Molybdenum 1.40 kg/.kg. Mo 


product 

4 Carbon Steel Melting Scrap 1.122 kg/.kg. Fe 


product - (0.357 x 

Quantity of HC & LC 

Ferro Chrome 

allowed under 

s.No.1) - 0.280 x 

quantity of Ferro 

Molybdenum allowed 

under s.No. 3) 

5 Ceramic Grains (for High 

Chromi Castings only) 

4% of FOB price 

6 Grinding Wheels (for High 

Chrome Castings only) 

2% of FOB price 

1 No. 1 Relevant Zinc Alloy 1.03 kg./kg. Content 


1 No. 1 CRCA Prime Cold Rolled 

Steel/in Sheet/ coil (! Mm to 3 

mm thick) 

1.24 kg./kg. Content 


2 Non Alloy Steel Wire Rod 1.02 kg./kg. Content 


3 Welding Rods 1% of the weight of 

the Steel to be 

welded 

4 Paints/Primer Value to be restricted 

within 2% of the 

FOB value 

5 Safety Relief Disk 1 No. 

6 Freon Valve 1 No. 

1 kg 1 Relevant Aluminum Alloy Ingots 1.06 kg/kg content in 


1 kg 1 Lead Ingot 

OR 



Pigs Lead Scrap 1.06 kg/kg content in 

the export product

C1961 Bismuth Alloy in the 

form of : Rod/ Wire/ 

Strips/ Sheet/ Foil/ 

Preforms/ Section Tube 

C1962 Lead Alloy in the form of 

: Rod/ Wire/ Sheet/ Foils/ 

Reforms/ Sections/ Tube 

2 Tin Ingot 

OR 

C387 



Tin Scrap 1.06 kg/kg content in 


3 Antimony Ingot 

OR 

4 Copper Ingot 

OR 



Antimony Scrap 1.06 kg/kg content in 




Copper Scrap 1.06 kg/kg content in 


4 Bishmuth Ingot 

OR 

5 Zinc Ingot 

OR 



Bishmuth Scrap 1.06 kg/kg content in 




Zinc Scrap 1.06 kg/kg content in 


6 Cadmium Ingot 

OR 

1 kg 1 Bismuth Ingot 

OR 



Cadmium Scrap 1.06 kg/kg content in 




1 Bismuth Scrap 1.07 kg/kg content in 


2 Tin Ingot 

OR 



2 Tin Scrap 1.07 kg/kg content in 


3 Lead Ingot 

OR 



3 Lead Scrap 1.07 kg/kg content in 



OR 


OR 

5 Zinc Ingot 

OR 



Antimony Scrap 1.07 kg/kg content in 








5 Zinc Scrap 1.07 kg/kg content in 



OR 



6 Cadmium Scrap 1.07 kg/kg content in 


1 kg 1 Lead Ingot 

OR 



1 Lead Scrap 1.07 kg/kg content in 


2 Tin Ingot 1.03 kg/kg content in

C1963 Cadmium Alloy in the 

form of : Bar/ Anode/ 

Ingot/ Slab/ Pigs 

C388 

OR the export product 

2 Tin Scrap 1.07 kg/kg content in 



OR 



3 Antimony Scrap 1.07 kg/kg content in 



OR 



4 Copper Scrap 1.07 kg/kg content in 


5 Bismuth Ingot 

OR 



5 Bismuth Scrap 1.07 kg/kg content in 


6 Zinc Ingot 

OR 



6 Zinc Scrap 1.07 kg/kg content in 



OR 



7 Cadmium Scrap 1.07 kg/kg content in 


1 kg 1 Cadmium Ingot 

OR 

Cadmium Scrap 

2 Tin Ingot 

OR 

Tin Scrap 

3 Lead Ingot 

OR 

Lead Scrap 


OR 

Antimony Scrap 


OR 

Copper Scrap 


OR 

Bismuth Scrap 

7 Zinc Ingot 

OR 

C1964 Cadmium Alloy in the 

form of : Rod/ Wire/ 

1 kg 1 

Zinc Scrap 

Cadmium Ingot 

OR 

Strip/ Sheet/ Foil/ 

Preforms/ Sections/ Tube 

2 

Cadmium Scrap 

Tin Ingot 

OR 

Tin Scrap 




































the export product

C1965 Tin alloy in the form of : 

Rod/ Wire/ Strip/ Sheet/ 

Foil/ Preforms/ Section/ 

Tube 

C1966 Bismuth Alloy in the 

form of : Bar/ Anode/ 

Ingot/ Slab/ Pigs 

3 Lead Ingot 

OR 

Lead Scrap 


OR 



OR 

Copper Scrap 


OR 

Bismuth Scrap 

7 Zinc Ingot 

OR 

1 kg 1 

Zinc Scrap 

Tin Ingot 

OR 

Tin Scrap 

2 Lead Ingot 

OR 

Lead Scrap 


OR 



OR 

C389 






































OR 

Bismuth Scrap 

6 Zinc Ingot 

OR 







Zinc Scrap 1.07 kg/kg content in 



OR 

1 kg 1 Bismuth Ingot 

OR 



Cadmium Scrap 1.07 kg/kg content in 


Bismuth Scrap 

2 Tin Ingot 

OR 

Tin Scrap 

3 Lead Ingot 

OR 

Lead Scrap 












the export product

C1967 Lead Concentrates 

C1968 Forged Steel Balls of Size 

upto 12mm dia made of 


OR 

Alloy Steel 

OR 


C1969 Forged Steel Balls of Size 

more than 12mm diaup 

to 40mm dia made of 


OR 

Alloy Steel 

OR 


C1970 Geophysical Equipment- 

HGS 2BP Connector 

C1971 Silver Targets/Discs 

99.9% purity. 

C1972 Computer Mechinery 

Parts made of E.G. Steel 

Sheets 

C1973 Resessed ball bearing 

cages 


OR 



OR 

Copper Scrap 

6 Zinc Ingot 

OR 

Zinc Scrap 


OR 

1 MT 1 

Cadmium Scrap 

Copper Sulphate as per IS 261- 

1992. 

2 Zinc Sulphate in Crystalline 

grade/form. 

2.987 kg 

3 Sodium Cyanide as per IS 9352- 

1980. 

0.386 kg 

4 Xanthates. 0.412 kg 

5 MIBC. 0.617 kg 

6 High Chrome Grinding Media. 5.286 kg 

7 Hydrated Lime with minimum 

80% CaO content; 100 MESH 

90%. 

1 kg 1 Wire/Wire Rod of relevant grade 

of Steel 

2 Flashing/Lapping Plates, 

Grinding wheels, Polishing 

compound. 

1 kg 1 Wire/Wire Rod of relevant grade 

of Steel 

2 Flashing/Lapping Plates, 

Grinding wheels, Diamond 

dresser, Polishing compound. 

1 No. 1 Thermoplastic Polyurethane 20% 

GF (Elastollan-R 3000) 

1 kg 1 Silver Ingots 99.9% purity. 

OR 

1 Scrap Silver/Used Silver Targets/ 

Discs. 

C390 

















2.987 kg 

1.234 kg 

1.45 kg 

Within 1% of FOB 


1.35 kg 

Within 1% of FOB 








1 No. 1 E. G. Steel Sheets 1.20 kg/kg content in 


1 kg 1 Steel Strips 1.83 kg/kg content in 


C1974 Resessed taper roller 1 kg 1 Steel Strips 3.20 kg/kg content in

earing cages 

C1975 All Types of Control and 

Speedometer Cables, 

Outer & Inner Cables 

(Automotive Application) 

C1976 LT/HT Aerial Bunched/ 

Cables 1x25 + 25 SQMM 

C1977 LT/HT Aerial Bunched 

Cables 3x25 + 1x25 

SQMM 

C1978 LT/HT Aerial Bunched 

Cables 3x50 + 1x35 

SQMM 

C1979 power Entry Components 

without wire harness 

C1980 Electrical Aluminium 

Cutout 

C391 


1 kg 1 Steel Wire 1.05 kg/kg content in 


2 Steel Stranded Wire 1.02 kg/kg content in 


3 Flexible Transmission Shaft 1.02 kg/kg content in 


4 Components Net to Net 

5 Plastic Granules 1.05 kg/kg content in 


6 Plastic Tubing 1.02 kg/kg content in 




1 KM 1 Aluminium Ingot 68 kg 

2 XLPE Compound 26 kg 

3 Aluminium-Magnesium-Silicon 

Alloy-Ingot 

OR 

68 kg 

a) Primary unalloyed Aluminium 1.02 kg/kg Content in 


b) Magnesium 1.10 kg/kg Content in 


c) Silicon 1.075 kg/kg Content 





Alloy-Ingot 

OR 

68 kg 

a) Primary unalloyed Aluminium 1.02 kg/kg content in 

the export prodcut 



c) Silicon 1.075 kg content in 





Alloy-Ingot 

OR 

93 kg 

a) Primary unalloyed Aluminium 1.02 kg/kg content in 




c) Silicon 1.075 kg content in 


1 No. 1 Brass Strip 1.30 kg/kg content in 


2 Nylon 6 Moulding 




1 No. 1 Aluminium Alloy Ingots 1.02 kg/kg content in 


2 Brass 1.05 kg/kg content in 

export product

C1981 Silica Refractory Boards 

for Tundish / Ladle 

Lining 

C1982 Hydraulic Cylinder for 

earth moving equipments 

C1983 ERW Steel Pipes / Tubes 

(Galvanised) ASTM 

Standard 

3 Copper Wire Bar 1.01 kg/kg content in 


1 No. 1 Quartzite / Quartz Powder 1250 kg 

2 Bonding Adhesive 

(Resin/Goulac) 

C392 

75 kg 

3 Filler (Boric Acid or Borax, 

Paper / Glass Fiber, Glass and 

Mineral Wool) 

62.5 kg 

4 Wooden Moulds 0.07 Nos. 

1 No. 1 Seal Dust. Net to net 

2 Packing Rod Net to net 

3 Bushing Net to net 

4 O-Rring Net to net 

5 Ring, Back Up Net to net 

6 Ring Piston Net to net 

7 Ring Wear Net to net 

8 Seal Dust Net to net 

9 Nylon Nut Net to net 

10 Nut Net to net 

11 Bolt Net to net 

12 Washer Net to net 

13 Non alloy cold drawn seamless 

steel tube of relevant grade 

1.1 Mtr./Mtr. Content 


14 ERW Steel Tube 1.01 Mtr./Mtr. 

Content in export 

product 

1 kg 1 Hot rolled Carbon steel sheets / 

strips / plates / coils other than 

high carbon steel 

0.9765 kgs. 

2 Zinc (In kgs) As per Engg. Table 

No. 11. 

Note : While the quantity of item No. 1 will remain the same for all thickness of the products, the quantity 

of item 2 will be as per the Engg. Table No. 11. 

C1984 ERW Steel Pipes/ Tubes 

(Galvanised) other than 

ASTM Standards 

1 kg 1 Hot rolled Carbon steel sheets/ 

strips/ plates / coils other than 

high carbon steel 

0.9765 kgs 

2 Zinc (in kgs) As per Engg. Table 

No. 11. 

Note : While the quantity of item No. 1 will remain the same for all thickness of the products, the quantity 

of item 2 will be as per the Engg. Table No. 11. 

C1985 Deleted 

C1986 Reducing Bushings of 

mild steel for rigid/IMC 

conduit 2 Zinc (If export product is 

galvanised) 

1 kg 1 Mild Steel Round Bars As per Table given in 

the foot Note. 

Note : The quantity of import of Mild Steel Round Bars to be allowed as under :- 

S. NO Size of export product Raw material in Kg to be allowed for 1 Kg of export product 

(a) (b) (c) 

1 ¾"X½"X9/16"L 4.00 

2 1"X½"X5/8"L 2.10 

0.8%of weight of 

export product

3 1"X¾" X5/8"L 3.75 

4 1¼"X½"X¾"L 1.80 

5 1¼"X¾"X¾"L 2.35 

6 1¼"X1"X¾"L 2.90 

7 1½"X½"X¾"L 1.70 

8 1½"X¾"X¾"L 1.80 

9 1½"X1"X¾ "L 2.50 

10 1½"X1¼ "X¾"L 5.00 

11 2"X½"X7/8"L 1.50 

12 2"X¾"X7/8"L 1.65 

13 2"X1"X7/8"L 1.95 

14 2"X1¼"X7/8"L 2.65 

15 2"X1½"X7/8"L 3.70 

C1987 Online Regulator for 

LPG Applications 

C1988 Integrated Regulator for 


C1989 Brass Retrofit Adaptor 

for LPG Applications 

C1990 Brass OEM Adaptor for 


C1991 Compact Regulator for 


C1992 Screw Type Regulator for 


C1993 Brass Cages for Ball and 

Roller Bearings 

C1994 Electrolytic Iron Powder 

(Food grade) having 

purity of 99.5% and 

above 

1 No. 1 Zinc Ingot 1.10 kg/kg content in 




2 Brass Scrap 1.075 kg/kg content 


3 Pressure Gauge Net to Net 

4 O-Ring Net to Net 

5 QCC Type I Connector Net to Net 























1 kg. 1 Brass Scrap 1.22 kg/kg content in 


1 kg 1 M.S. Plate 1.80 kg 

C393

C1995 Refrigerator 

1 No. 1 Copper Coated M.S. Tube 1.02 Mtr./ Mtr. 


product of relevant 

specification used in 

export item 

OR 



2 Relevant refrigerant gas Net to net 

3 Cyclopantane/ Solkane 141 B ( R 

141 B) Halogenated Derivate of 

Acyclic Hydrocarbon Dichloro 

Fluroethane 

C394 



4 Isocyanate 1.04 kgs/kg content 


5 Polyol 1.04 kgs/kg content 


6 Isobutane 1.04 kg/kg content in 


7 CRCA 1.04 kg/kg content in 


8 HIP Sheet 1.04 kg/kg content in 


9 General Purpose Polystyrene 1.04 kg/kg content in 


10 Polypropylene Homo Polymer 1.04 kg/kg content in 


11 Polypropylene Copolymer 1.04 kg/kg content in 


12 Pre-Coated Steel Sheets 1.04 kg/kg content in 


13 Lock Prop 1.04 kg/kg content in 


14 Double Tack Tape Net to net 

15 Other Relevant component Net to net 

16 ABC Moulding Tubing 1.04 kg/kg content in 


17 Relevant Copper Tubing 1.01 kg/kg content in 


18 Galvanized iron sheet/Vinyl 

coated galvanized iron sheet 

19 LDPE/HDPE Moulding Powder / 

Granules 





20 HIP Moulding Powder/granules 1.04 kg/kg content in 


21 PVC Moulding Powder/granules 1.04 kg/kg content in 


22 Relevant S.S. Sheets 1.04 kg/kg content in 


23 Solder Silver 35% 0.04% of the FOB 

value 

24 Granules - ABS 1.04 kgs/kg content 


25 Powder Paint such as Vinyl 

coated metal - Metlon/ Vinyl 

coated metal - Regular 



26 Lubricating Oil Net to Net basis

C1996 Air Cooled Fluid Cooler 

C1997 Copper Circle (in sheet 

form) 

C1998 Chairs 

C1999 Modular Work Station 

C2000 Stainless Steel Travelling 

Guard 

C2001 Platinum Ingots Min 

Purity 99.95% 

Palladium Ingots Min 

Purity 99.95% 

Gold Ingots Min Purity 

99.5% 

Silver Ingots Min Purity 

99.9% 

Rhodium Powder Min 

Purity 99.5% 

Iridium Powder Min 

Purity 99.5% 

Ruthenium Powder Min 

Purity 99.5% 

1 No. 1 Seamless Copper Tube 1.01 kg/kg content in 


2 Heresite Coating 2% of FOB value 

1 kg 1 Copper Cathode 1.03 kg 

1 No. 1 Polyol 0.63 kg of the weight 

of the Foam 

2 Isocyanate 0.42 kg of the weight 

of the Foam 

3 Relevant Fabric/Leather cloth 1.10 Sq.m/Sq.m 

content 

4 CRCA Mild Steel Sheets 1.05 kg/kg content in 


5 Gas Spring Net to net 

6 Chair Mechanism Net to net 

7 Caster Net to net 

1 No. 1 Relevant Pre laminated/ Plain 

particle Board 

C395 

1.05 Sq.m/Sq.m 


product 

2 CRCA Mild Steel Sheet 1.05 kg/kg content in 


3 Relevant Aluminium Alloy Ingot 

OR 

Relevant Aluminium Alloy 

Sections 

4 PVC Plastic Sheet (8mm to 

25mm wide) 

1 kg 1 Cold Rolled Stainless Steel Sheet 

Coil of relevant grade 

1 kg 1 Precious metal Ores & 

Concentrates containing any one 

or more precious metals viz. 

Platinum, Palladium, Gold, 

Silver, Rhodium, Iridium, 

Ruthenium, Osmium. 

OR 

2 Waste and Scrap of precious 

metal or metal clad with precious 

metal; other waste and Scrap 

containing precious metal or 

precious metal compounds of a 

kind used principally for the 

recovery of any one or more 

precious metals viz. Platinum, 

Palladium, Gold, Silver, 

Rhodium, Iridium, Ruthenium, 

Osmium. 





1.02 Metre/Metre 


product 

1.05 kg 

Osmium Powder Min 

Purity 99.5%. 

Note : Each of the precious metal contained in the above input material as declared in the import 


precious metal in 



precious metal in 

export product

documents is to be accounted for in the export product. 

C2002 Expansion Fasteners 

made of Non Alloy Steel 

C2003 Hot rolled Non-alloy Steel 

(Pickled/ Un-pickled) 

Plates/ Sheets/ Strips/ 

Wide Coil 

1 kg 1 Non Alloy Steel Round Bar 1.10 kg/kg content in 


2 Non Alloy Steel Sheet 1.47 kg/kg content in 


1 MT 1 Non-alloy Steel melting Scrap, 

Pig Iron/Hot Metal, Sponge Iron 

including Hot Briquetted Iron 

(HBI) 

1150 kg 

2 Low Silica Lime Stone 76 kg 

3 a) Bulk Ferro Alloys (Ferro Silicon/ 

Ferro Manganese/ Silicon 

Manganese) 

b) Special Ferroalloys/ metals 

(Ferro Chrome/ Ferro Vanadium/ 

Ferro Niobium/ Nickel Oxide 

Sinter/ Ferro Nickel/ Ferro 

Aluminium/ Ferro Titanium/ 

Ferro Boron/ Ferro Phosphorous/ 

Magnesium Metal/ Ferro 

Molybdenum) 

4 Additives: 

a) Aluminium wires/ scraps/ shots/ 

ingots and/ or Aluminium 

Powder in Cored wire. 

b) CaSi/ café Lumps, CaFeAL/ 

caFe/ CaSi Powder in Cored wire 

c) Met coke/ Raw Pet. Coke/ Coke/ 

Calcined Pet Coke 

5 Consumables/ Misc. 

C396 

8.4 kg 

2.6 kg 

3.0 kg 

0.5 kg 

4 kg 

a) Rolls for caster and rolling mill 0.5 kg 

b) Copper mould for casting 0.02 kg 

c) Casting Powder 1 kg 

d) Rolling Mill Oil/ Hydraulic Oil/ 

Lubricating Oil 

3 kg 

e) Celox Inserts/ Oxygn Probes/ 

Sampler Probes 

0.10 kg 

f) Shear Blades/ Saw Blades 0.01 kg 

g) Oxygen Lance Pipes 0.12 kg 

h) Temperature Tips/ Sampler Tips/ 0.20 kg 

Thermodynamic elements 

I) Graphite Electrodes 2.4 kg 

6 Refractories: 

a) Shaped Refractories (Fired/ 

Unfired Bricks/ Shapes) 

b) Monolithic Refractories 

(including Castables, ramming 

mass/ gunning mixes) 

c) Special Refractories i.e. C.C. 

refractory (Shrouds, Mono Block 

Stopper, SE Nozzles), Slide Gate 

refractory, Porous Plug, Zircon/ 

Zirconia Nozzles & Tundish 

Nozzles 

7 Energy Sources: 

3 kg 

6 kg 

1 kg

a) LPG (for Supersonic Oxygen 

lance in EAF) 

b) LDO (or preheating of ladle and 

heating of thin slab in tunnel 

furnace) 

20 kg 

c) Natural Gas/ LNG (for Tundish 

& SEN heating) 

0.25 SCM 

Note: 1. This norm is applicable for export product manufactured through Electric Arc. Furnace 

(CONARC process) - Thin Slab Caster - Hot Strip Mill. 

Note: 2. Quantity of Pig Iron/ Hot Metal and Sponge Iron/ HBI allowed against S. No. 1 shall not exceed 

60% and 35% respectively of the total quantity permitted therein. 

Note: 3. Import of Silico manganese allowed at S. No. 3 (a) shall not exceed 60% of the total quantity of 

import. 

Note: 4. Special Ferro Alloy (s)/Metal against S. No. 2 (b) will be allowed only if the respective alloying 

elements (s)/ metal is/ are actually present in the export product. 

C2004 Black Pipe 1 MT 1 Hot rolled carbon steel strips/ 

coils/ plates other than high 

carbon steel 

1.05 MT 

C2005 Precision Steel Tubes 1 MT 1 Cold rolled carbon steel strips/ 

coils/ plates other than high 

carbon steel 

1.05 MT 

C2006 Trumpet Horns 

C2007 Rubber Bonded Grinding 

Wheel 

C2008 Mass Transfer 

Equipment / Column 

Internals 

1 No. 1 CRCA Steel Strip 0.6 x 12 

OR 

C397 

4 kg 



Spring Net to Net 

2 CRCA Steel Strip 0.18 x 0.9 

OR 



Membrane/ Diapharagm Net to Net 

3 Alu-Zinc Steel Strip 1.25 x 118.4 

OR 



Housing Net to Net 

4 Super Enameled Copper 

Wire/Copper Wire 

5 ABS Black 

OR 

Trumpet Net to Net 





6 Glue 1% of FOB value of 

export 

7 Other relevant components As per General Note 

No. 4 for Engg. 

Product. 

1 No. 1 Aluminium Oxide Synthetic, 

Silicon Carbide, Depolymerised 



1 kg 1 Relevant Stainless Steel Sheets / 

plates 

1.08 kg/kg Content 

2 Relevant Stainless Steel Pipes / 

Tubes 

1.05 kg/kg Content 

3 Relevant Fasteners Net to Net basis 

C2009 Carbide Heading Dies 1 No. 1 Carbide Inserts 1 No. (net to net) 

C2010 Ferro Titanium (Lumps/ 

Granules/Powders) 

C2011 Nickel Cadmium Pocket 

Plate Batteries in 

1 Tone 1 Titanium Scrap (containing 85- 

95% Ti) 

825 kg 

2 Ferro Silicon (70-75% Si) 25 kg 

3 Steel Melting Scrap 190 kg 

1 No. 1 Nickel Hydroxide Powder (45- 

65% Nickel + Cobalt) 


the export product

Polypropylene 

Containers with Spares 

and standard accessories 

C2012 Tin Powder 

C2013 Silicon Carbide 

Briquettes containing 

90% Silicon Carbide 

Crude 

C2014 Wheels for Agricultural 

and Forestry Equipment 

such as Tractors, 

Backhoc Loaders, 

Lagskidders and Skid 

Steers (weight range 21 

Kgs to 59 Kgs) 

C2015 Bars and Rods of 

Exhaust Valve Steel in 

ground finished condition 

C2017 Hub Shell (Weight 294 1 No. 1 

C398 

Non Alloy Steel Round of 


OR 

Hydrated Nickel Sulphate 

OR 

Net to Net basis 

Nickel Anode Net to Net basis 

2 Cadmium Hydroxide 

OR 

a) Cadmium Oxide (87.25% 

Cadmium) 

b) Graphite Flakes (99.62% Carbon 

Min.) 

3 C.R. Steel Strips/Perforated Steel 

Strips (0.08 to 0.1 mm thick) 

4 Lithium Hydroxide 

(Monohydrated / Solid) 











5 Potassium Hydroxide 1.02 kg/kg content in 




1 kg 1 Tin ingots 

OR 



Tin Scrap 1.03 kg/kg content in 


1 kg 1 Silicon Carbide Crude 0.916 kg 

1 No. 1 HR Plates/ HR Wide Coils 

(thickness greater than and equal 

to 5 mm) of relevant grade of 

steel 

2 HR Sheets/ HR wide Coils 

(thickness less than 5 mm) of 

relevant grade of steel 

1.20 Kgs/Kg content 


1.09 Kgs/Kg content 


3 Paint & Thinner 3% of FOB value 

4 Welding Wire/ Flux 3% of weight of Steel 

to be welded 

1000 kg 1 Non-alloy Steel Melting Scrap 735 kgs 

2 Ferro Alloys comprising of Low 

Carbon (C:0.10% max.) Ferro 

Chrome/ Low Phosphorus 

(P:0.10% max.) Ferro 

Manganese 

OR 

642 kgs 

a) Low Carbon (C:0.10% max.) 

Ferro Chrome 

468 kgs 

b) Low Phosphorus (P:0.10% max.) 130 kgs 

Ferro Manganese/ Manganese 

Metal / Manganese Nitride 

3 Unwrought Nickel 58 kgs 

Note: In case "Alloy Steel Scrap" is used in place of "Non Alloy Steel Scrap" as at Sr. No. 1, quantities of 

items at Sr. No. 2/2 (a), 2 (b) and Sr. No. 3 shall be reduced proportionately depending upon the content of 

"Chromium/ Manganese/ Nickel in the Alloy steel Scrap. 

C2016 Non Alloy Steel Wire 

Woven Mesh 

1 kg 1 High Tensile Non Alloy Steel 

Wire of relevant grade & Dia. 

1.02 kg 

660 gms

gms) (Bicycle part) 

C2018 Stainless Steel Wire 

Mesh/ Netting 

C2019 Stainless Steel Wire 

Braid 

C2020 Jar Sealer (Weight 200 

gms for import item No. 

1, 155 gms for import 

item No. 2 & 156 gms for 

import item No. 3 

C2021 Tubular Aluminium 

Alloy Knitting Pins / 

Needles 

C2022 Complex Shaped Metal 

Components 


Metal Injection Molding 

C2023 Stainless Steel Screens for 

Filtration / Separation 

C2024 "52" Decorative Ceiling 

Fans with 5 wooden 

blades and 4 lamps 

(weight 11 kgs) 

1 MT 1 SS Wire of relevant grade and 

diameter 

OR 

C399 



SS Wire Rod of relevant Grade 1.05 MT/MT content 


1 MT 1 SS Wire of relevant grade and 

Diameter 

OR 

1 No. 

(weight 511 

gms) 



SS Wire Rod of relevant grade 1.07 MT/MT content 


1 Non-Alloy Steel Sheet 250 gms 

2 Bakelite Powder / Granules 162 gms 

3 Non-Alloy Steel Rod 200 gms 

1000 Nos 1 Relevant Aluminium Alloy Tube 

in Coil Form 

OR 

Relevant Aluminium Alloy Tube 

in cut length 

1.0 kg 1 Metal Powders: 



Net to net 

a) carbonyl Iron Powder 1.05 kg/kg content in 


b) SS Metal Powder 1.05 kg/kg content in 


c) Nickel Powder 1.05 kg/kg content in 


d) Other Relevant Metal Powder 1.05 kg/kg content in 


2 Binders: 

a) Polypropelene Upto 2% of FOB 


b) Paraffin Wax -do- 

c) Krayton Flake -do- 

d) Stearic Acid -do- 

1.0 kg 1 Stainless Steel Wire 

OR 



Stainless Steel Rod 1.05 kg/kg content in 


2 Stainless Steel Rings Net to net 

1 No. 1 Speed Control Pull Chain Switch Net to net 

2 Pull Chain Switch for lighting Net to net 

3 Pressure type wire connector Net to net 

4 Side Switch (Plastic case) Net to net 

5 Ceiling Fan Wooden Blades Net to net 

6 Blade Shank Net to net 

7 Lamp Holder Net to net 

8 Pull Chain for Switch Net to net 

9 Ball Bearing Net to net

C2025 I.C. Engine 3 H.P. - 28 

H.P 

C2026 I.C. Engine above 28 H.P. 

- 720 H.P 

C2027 I.C. Engine above 720 

H.P 

10 capacitor Net to net 

11 CC Copper Rod 0.291 kg 

12 CRNGO Steel Sheet 2.61 kg 

13 EC Gr. Aluminium for Rotor 0.190 kg 


Policy 

15 CRCA Sheet EDD Gr. For top 

and bottom cover 

C400 

0.716 kg 

16 Glass Sleeve 1.5 mm 204 mm dia 

3 mm 204 mm dia 8 

mm 102 mm dia 

1 No. 1 Finished Components Net to net 

2 Unfinished Forgings Net to net (in 

numbers) 

3 Unfinished Castings Net to net (in 

numbers) 

4 Non Alloy Steel 1.47 kg/kg content in 


5 Pig Iron 

a) For casting wt. Above 10 kg.& 

upto 100 kg. 



b) For casting wt. Above 100 kg 1.20 kg/kg content in 


6 Consumables 4% FOB value of 


7 HS Diesel As per the general 

note for fuel under Sl. 

No. 8 



numbers) 


numbers) 



5 Pig Iron 

a) For casting wt. Above 10 kg & 

upto 100 kg 



b) For casting wt. Above 100 kg 1.20 Kg/kg content in 





note for fuel under Sl. 

No. 8 



numbers) 


numbers) 



5 Pig Iron 

a) For casting wt. Above 10 kg & 1.25 kg/kg content in

C2028 Genset from 3 KVA upto 

& including 20 KVA 

C2029 Genset from above 20 


600 KVA 

C2030 Genset above 600 KVA 

C401 

upto 100 kg. the export prodcut 

b) For casting wt. Above 100 kg. 1.20 kg/kg content in 


6 Consumables 4% FOB value export 

prodcut 


note for Fuel under 

Sl.No. 8. 



numbers) 


numbers) 



5 Pig Iron 


upto 100 kg. 






export prodcut 



Sl. No. 8. 



numbers) 

3 Unfinished Castingsd Net to net (in 

numbers) 



5 Pig Iron 


upto 100 kg. 









Sl. No. 8. 



numbers) 


numbers) 

4 Non alloy Steel 1.47 kg/kg content in 


5 Pig Iron 


upto 100 kg. 





6 Consumables 4% FOB value of

C2031 Pump set from 3 H.P. 

upto & including 28 H.P. 

C2032 A.C. Generator 0 to 625 

KVA 

C2033 Stainless Steel Minted 

Coins/Coin Blanks 

C2034 Cold Rolled Zinc (43.5%) 

& Aluminium - Silicon 

(56.5%) alloy coated 

Non-alloy Steel Sheets / 

Strips / Wide Coils with / 

without Resin coating. 

C402 




Sl. No. 8. 



numbers) 


numbers) 

4 Non alloy Steel 1.47 kg/kg content in 


5 Pig Iron 


upto 100 kg. 









Sl. No. 8. 

1 No. 1 CRNGO Sheets 1.37 kg/kg content in 


2 Copper Rods 1.01 kg/kg content in 


3 Aluminium Ingots Grade LM6 1.06 kg/kg content in 


4 EN-8 Steel Bar 1.20 kg/kg content in 


5 Ball / Roller / Sleeve Bearings Net to net 

6 Insulation Material 1.05 kg/kg content in 


7 Automatic Voltage Regulator 

(AVR) 

Net to net 

8 Single Core Copper Insulated 

Cable Class - H 

1 kg 1 Cold Rolled Wide Coils/Strips 

(as-rolled/annealed/annealed & 

pickled) of relevant grade of 


OR 

Hot Rolled Wide Coils/Strips 

(pickled/un-pickled) of relevant 

grade of Stainless Steel 

OR 

Slab of relevant grade of 

stainless Steel 

1000 kgs 1 Hot Rolled Non-Alloy Steel 

Strips /Wide Coils 

1.02 Metre/Metre 


product 

1.22 kgs 

1.29 kgs 

1.33 kgs 

1.118 kgs./1 kg. CR 

steel content in 

export product.* 

2 Zinc Slab / Ingots 0.435 x Mass of Zn- 

Al-Si Alloy as per 

Engineering Table X 

(New additional 

Table No. to be 

allotted) 

3 Aluminium-Silicon Alloy Slab / 0.565 x Mass of Zn-

C403 

Ingots Al-Si Alloy as per 

Engineering Table X 

(New additional 

Table No. to be 

allotted). 

4 Resin (permitted against export 

of Resin coated products only) 

5 Rolling Mill Rolls 1.25 Kgs 

6 Rolling Mill Oil 0.35 Kg 

7 Picking Oil 0.45 Kg 

As per Engineering 

Table XX (New 

additional Table No. 

to be allotted). 

8 Steel Strapping for Packing As per Packing 

Policy. 

9 Galvanished Plain Sheets for 

packing 

As per Packing 

Policy. 

Note: The following formula shall be adopted to work out the quantity of CR Steel content in export: 

CR Steel content = (Mass of export product) - (Mass of Zn-Si alloy as per Table/1.05) - (Mass of Resin as 

per Table/1.015, if resin coated). 

C2035 Self Supporting Aerial 

Telephone Cable of 


having Copper 

Conductor 0.4 mm dia 




having Copper 





having Copper 


C2038 Heavy weight drill pipes 

3-1/2" OD to 6-5/8" OD, 

length 9.45 Meters to 9.76 

Meters (31 feet to 32 feet) 

having coating thickness 

of 5-9 mil (125 to 225 

microns) of 

phenolic/epoxy/modified 

urethane/ epoxy powder 

C2039 Silicon metal 99% 

minimum 

C2040 Resistance Welding 

Products namely, Spot 

Welding Electrodes 

Cap/Tip 


Products namely, 

1 km As per Engineering Table No. 9 

(6) 


(7) 


(8) 

1 No. 1 Plain and seamless pipe of 

relevant diameter-4" to 7-1/4" 

OD (1/2" more dia than finished 

HWDP) 

8.347 meters 

2 Relevant steel bar stock 1.6065 meters 

3 Relevant Coating material 0.1434 Gallons 

4 Hard banding material such as 

tungsten carbide, Armcor M, 

Arnco XT series, Smooth X, 

2.73 kg 

5 Threading inserts 0.20 Sets 

1 MT 1 Silicon metal 94-96% puirity 1.05 MT 

1 kg 1 Relevant Rod of Copper, 

Chromium Copper, Chromium 

Zirconium Copper, Nickel 

Silicon Chromium Copper, 

Beryllium Copper & Silver 

Copper. 

1 kg 1 Relevant Plate of Copper, 






the export product.

Projection Welding 

Electrodes/Dies 


Products namely, Seam 

Welding 

Electrodes/Wheels/Discs 


Products namely, Flash 

Welding 

Electrodes/Dies/Jaws 


Products namely, Mould 

Plates, Made of Copper, 

Chromium Copper, 

Chromium Zirconium 

Copper Nickel Silicon 

Chromium Copper, 

Beryllium Copper & 

Silver Copper. 

1 kg 1 



Copper. 

Relevant Billet of Copper, 





Copper. 

1 kg 1 Relevant Billet of Copper, 





Copper. 

1 kg 1 Relevant Plate of Copper, 





Copper. 

C404 







C2045 Contact tape (Tinned) 1 kg 1 Brush Alloy (Untinned) 17410 1.01 kg/kg content in 

the export product.

Duty Exemption Scheme

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?