Thermoforming machines - Model- and tool manufacturing ... - Geiss

www. -ttt.com
Motor trimming spindles
20
For 5-axes and 3-axes trimming we offer exactly adapted trimming spindles
with performances between 3 and 25 kW, speed up to 60.000 min-1
and tool holding fixtures up to size HSK63 made by renowned manufacturers.
GEISS milling spindle
fitted in a very compact
gimbal milling head.
CLASSIC trimming spindles
The CLASSIC trimming spindles have a tool
clamping device that permits automatic tool
change. The particular feature of the CLASSIC
trimming spindles is the interchangeable shaft
unit. In the event of damage to the bearing, it
is not necessary to remove and repair the
complete spindle, but only the shaft unit. Also
for these spindles we carry refurbished spindles
permanently in stock.
GEISS trimming spindles
GEISS trimming spindles have 2 protruding shaft ends. The direction
of rotation of these spindles can be inverted in seconds via
program. The spindles are therefore especially suitable for the
trimming of mouldings. GEISS spindles are available in 2 sizes.
We have built up a very fast and unbureaucratic exchange and
repair service for GEISS trimming spindles, which we produce
ourselves in every part in highest precision and which are subject
to most rigorous quality control. Refurbished spindles and new
spindles are permanently available. The refurbished spindles are
offered to our customers at an extremely attractive price.
All spindles carry a guarantee for operational life.
Trimming spindle
CLASSIC 80 A6
Trimming spindle
CLASSIC
with exchangeable
spindle shaft unit
including the
spindle bearings