NALGENE Centrifuge Tubes and Bottles

DS3112 Round Centrifuge Tube, low-density polyethylene
This popular translucent tube has good chemical resistance and is used in refrigerated centrifuges up to 10,000
x g (at 4°C). Supplied without closure. At high speeds, this tube should ALWAYS be filled to 80% of actual
capacity and ALWAYS be used with NALGENE friction-fit closure (Cat. No. DS3111-0029).
Cat. No. DS3112 -0050
Nom. capacity, ml 50
No. per Case 10
DS3113 Round Centrifuge Tube, Tefzel* ETFE
A translucent, autoclavable tube with excellent chemical resistance and high tensile strength. It’s ideal for use in
refrigerated centrifuges up to 50,000 x g. At high speeds, it should ALWAYS be filled to 80% of actual capacity and
ALWAYS be used with a NALGENE friction-fit closure (Cat. No. DS 3111-0029). It's ideal for use in refrigerated
centrifuges up to 50,000 x g. Supplied without closure.
Autoclavable
Cat. No. DS3113 -0500
Nom. capacity, ml 50
No. per Case 2
*Or equivalent. Tefzel is a registered trademark of DuPont.
3117 Round Centrifuge Tubes, polycarbonate
Transparent polycarbonate tubes are autoclavable and have outstanding mechanical strength - better than
polypropylene. For use up to 50,000 x g in refrigerated or non-refrigerated centrifuges. Supplied without
closure. Cat. No. 3117-1000 is lipped; 50-ml size available lipped (Cat. No. 3117-9500) or non-lipped
(Cat. No. 3117-0500). must be filled to 80% of the total capacity.
Autoclavable/Transparent
Cat. No. 3117 -0120 -0150 -0160 -0380 -0500 -9500 -1000
Nom. cap., ml 12 15 16 38 50 50 100
No. per Pkg 10 10 10 10 10 10 10
No. per Case 100 100 100 100 100 100 40
www.nalgenunc.com
Round Bottom Tubes
WARNING!
All centrifuge ware must be at least 80% full for proper performance, unless otherwise noted.
3
3