appendix

Application Manual -- Liquid Cooled Generator Sets
APPENDIX I
List of Tables
Table 2--1. Rating and System Types ..................................... 2--4
Table 2--2. Representative Outside Noise Levels ........................... 2--13
Table 2--3. Typical Diesel Exhaust Emissions .............................. 2--14
Table 3--1. Lighting Power Factors (Starting and Running) ................... 3--4
Table 3--2. Ballast Power ............................................... 3--4
Table 3--3. Rotating Inertia Summary ..................................... 3--5
Table 3--4. Reduced Voltage Starting Methods and Characteristics ........... 3--7
Table 3--5. Multiplying Factors Corresponding with Code Letters ............. 3--8
Table 3--6. Three--Phase Motor Defaults: NEMA Code, EFF, SPF, RPF ....... 3--10
Table 3--7. Single--Phase Motor Defaults: NEMA Code, EFF, SPF, RPF ....... 3--11
Table 3--8. Generator Set Requirements for Medical Imaging Applications ..... 3--13
Table 3--9. Typical Voltage and Frequency Tolerances ...................... 3--15
Table 5--1. Winding Configurations ....................................... 5--15
Table 6--1. Cross Sectional Areas of Openings of Various Diameter .......... 6--19
Table 6--2. Equivalent Lengths of Pipe Fittings in Feet (Meters) .............. 6--19
Table 6--3. Equivalent Lengths of Pipe Fittings and Valves in Feet (Meters). ... 6--33
Table 6--4. Antifreeze Mixture Properties .................................. 6--43
Table 6--5. Equivalent Lengths of Pipe Fittings and Valves in Feet (Meters) .... 6--63
Table 6--6. Estimated Heat Emitted from Uninsulated Exhaust Piping and
Mufflers .................................................... 6--69
Table 6--7. Freezing and Boiling Points vs. Concentration of Antifreeze ....... 6--83
Table 6--8. Heat Losses From Uninsulated Exhaust Pipes and Mufflers ....... 6--90
Table 6--9. Diesel Fuel Specifications ..................................... 6--92
Table 6--10. Minimum Fuel Hose and Pipe Sizes; Up to 50 Feet (15 Meters)
Equivalent Length. ........................................... 6--97
Table 6--11. Maximum Allowable Percentages for Engine Fuel
Combustibles ............................................... 6--101
Table 6--12. Maximum Allowable Percentages of Constituent Gases Before
Derating Turbocharged Engines ............................... 6--101
Table 6--13. Natural Gas Schedule 40 Iron Pipe Sizing ....................... 6--106
Table 6--14. Natural Gas Semi--Rigid Copper Tubing Sizing .................. 6--107
Table 6--15. Propane Vapor Schedule 40 Iron Pipe Sizing .................... 6--108
Table 6--16. Propane Vapor Semi--Rigid Copper Tubing Sizing ................ 6--109
Table 6--17. Propane Schedule 40 Iron Pipe Sizing, Liquid Withdrawal --
Maximum Capacity of Pipe in Cubic Feet of Gas per Hour. Pipe
size recommendations are based on schedule 40 black iron pipe. .. 6--110
Table B--1. Reduced Voltage Motor Starting Comparison .................... B--2
Table E--1. Recommended Minimum Exhaust Stack Temperatures.
(Exhaust gas temperature is measured by thermocouple. Use of
external temperature sensing is not sufficiently accureate to verify
exhaust temperature.) ....................................... E--3
I--2 APPENDIX I
Rev. Jan 2011