CATERPILLAR

More documents

Recommendations

Info

Illustration 15: Enter the approver name and approval group description. Example screen. R Morse will be the approver for the shop technicians. The group name is SHP. Create as many approval groups as required. If more than one group of shop technicians is required, and specific technicians are to report to a specific approver, more than one group will need to be created. An example might be SHP1, and SHP2. Enter the approval group name for field technicians if field technicians will be uploading labor to DBS. A common group name for field technicians is FLD. If more than one group for field technicians is needed, give each group a unique name, FLD1, FLD2 etc. Assign the technicians to the specific approver and approver group. Creating two groups will enable two approvers and two groups of shop technicians. Repeat this procedure until all of the approvers and approver groups are set up. Multiple approvers may be setup to approve a group of technicians. 40
Illustration 16: A question mark can be used to determine what groups an individual is responsible for. Enter the approver ID and a question mark in the approval group to query which groups the approver is responsible for. Illustration 17: R Morse is responsible for approving field technicians (FLD) and shop technicians (SHP). 41
Page 1 and 2: 1 CATERPILLAR Service Technician Wo
Page 3 and 4: Table of Contents Introduction.....
Page 5 and 6: Installation.......................
Page 7 and 8: Computer/Software Hardware Recommen
Page 9 and 10: If you do not have Service Technici
Page 11 and 12: Illustration 4: The STW setup will
Page 13 and 14: Select the “Yes” button to cont
Page 15 and 16: Step 8 Select Components The Select
Page 17 and 18: Frequently Asked Questions If you a
Page 19 and 20: Q) How do I subscribe to SIS and/or
Page 21 and 22: Purpose If communicating Service In
Page 23 and 24: - OR - 7X-1700 - Caterpillar Commun
Page 25 and 26: Instructions To set up the Communic
Page 27 and 28: The service tool will remain unaffe
Page 29 and 30: 202 A required INI file was not loc
Page 31 and 32: Challenger Technician Purpose The C
Page 33 and 34: Dataview DataView measures and logs
Page 35 and 36: • To Delete Existing Lines from a
Page 37 and 38: MNTWOCTL (Direct Labor to Approval
Page 39: Illustration 14: Enter the intended
Page 43 and 44: Illustration 19: Other shift time e
Page 45 and 46: Illustration 22: Enter the appropri
Page 47 and 48: Labor Approval Setup - DBS DBS must
Page 49 and 50: Labor Upload -End of Job Setup Illu
Page 51 and 52: Illustration 29: Open the SIMS DBS
Page 53 and 54: Illustration 32: Save the report te
Page 55 and 56: Select the Upload Settings Tab and
Page 57 and 58: Example of file name and save: AA00
Page 59 and 60: 1-877-598-8920 DCS Support Center:
Page 61 and 62: 1. Run the SIS Setup CD on the netw
Page 63 and 64: o Select the TA inspection to open.
Page 65 and 66: � � Illustration 43: TA Search
Page 67 and 68: o o Illustration 46: The TA Navigat
Page 69 and 70: o Following are items and their bac
Page 71 and 72: Step 9 On the STW installation main
Page 73 and 74: Step 12 In the Software License Agr
Page 75 and 76: Step 15 After the files have been c
Page 77 and 78: Illustration 57: Program Maintenanc
Page 79 and 80: Step 17 After the files have been c
Page 81 and 82: Illustration 63: Monthly Data Updat
Page 83 and 84: Service Information System Web (SIS
Page 85 and 86: Parts Integrator Purpose Parts Inte
Page 87 and 88: - The integration software has been
Page 89 and 90: Illustration 74: Step 8 Once the
Page 91:
Refer to the STW Knowledge Entry li
show all

CATERPILLAR

Create successful ePaper yourself

Delete template?

Save as template?