Conference Program - LOPE-C 2011

TECHNICAL CONF. | THURSDAY-JUNE 30, 2011
Track 1
Electronics / Components II (02:00 pm - 03:30 pm) | LOCATION SPEKTRUM / LEVEL C2
03:30 pm COFFEE BREAK
Integrated Smart Systems II (04:00 pm - 05:00 pm) | LOCATION SPEKTRUM / LEVEL C2
04:00 pm New Challenges for the PCB-Technology
Dr Udo Bechtloff,
KSG Leiterplatten GmbH, Chairman of the Managing Board, Germany
- The Printed Circuit Board - past and present
- Direct metallization on the basics of polymers
- The "wedding" of standard technologies with new applications (OLED, RFID, embedded Devices)
04:30 pm Innovative Integrated Smart materials for automotive sector
Dr Nello Li Pira,
Centro Ricerche Fiat S.C.p.A., Project Manager, Italy
- The development of new devices and the growth in complexity of existing systems naturally leads o increase in size, weight and consumes in the most car segments. In
spite of this, actual vehicles exhibit compact dimension, maintaining low emissions and reduced consumptions. The evolutionary approach, aiming at the use of new
disruptive manufacturing techniques to enhance the current devices, gets through to the upgrade and the optimization of the existing components.
- With respect to the conventional car components, the major benefits related to such introduction are: reduction of the costs production, cabling saving, improvement in
comfort and safety, fuel saving and finally reduction of emissions of noxious species and fine particles.
- The availability of the state-of-the-art nanomaterials and micro-nano technologies is essential, but in this brief overview we emphasise that, when dealing with a complex
product like an automobile, the success is determined by advanced sub-systems design and integration aiming at the optimisation first of the major system blocks and then
at the vehicle as a whole.
05:00 pm SESSION END
page 80