Conference Program - LOPE-C 2011
Conference Program - LOPE-C 2011
Conference Program - LOPE-C 2011
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
INTERACTIVE SESSION | WEDNESDAY-JUNE 29, <strong>2011</strong> | LOCATION FOYER / LEVEL C2<br />
MATERIALS<br />
06:00 pm Innovated Dyes developments for Solar Cells Application<br />
Mr Ta-Chung Yin,<br />
Everlight Group, Manager, Taiwan<br />
PRINTING, PATTERNING TECHNOLOGIES AND APPROPRIATE EQUIPMENT<br />
06:00 pm Towards Printed Organic Solar Cell Modules for Advanced Design &<br />
Low-Cost Energy<br />
Dr Mickael Barret,<br />
ARDEJE, R&D Manager, France<br />
06:00 pm Evaluation and Determination of Gravure Cylinders for Functional<br />
Printing<br />
Mr Nils Bornemann,<br />
TU Darmstadt, PhD student, Germany<br />
06:00 pm MicroStar Engraving and AccuPress® MicroGravure Printing<br />
System: The Future for Printed Electronics<br />
Mr Udo Dittmar,<br />
Daetwyler R&D Corporation, President, United States<br />
06:00 pm Continuous Multilayer Coating<br />
Mr Moritz Graf zu Eulenburg,<br />
InovisCoat, Director Business Development, Germany<br />
06:00 pm Study on Gravure Printed Dielectric Layers for All Printed Thin Film<br />
Transistors<br />
Mr Junseok Kim,<br />
Sunchon National University, Ph.D student, South Korea<br />
06:00 pm R2R Aluminum Anodization for Large-area of Printed Electronics<br />
Mr Namsoo Lim,<br />
Paru corp., South Korea<br />
06:00 pm A Study on Inking PDMS Stamp of Micro-Contact Printing<br />
Mr Yeh-Min Lin,<br />
Metal Industries Research and Development Centre, Project Manager, Taiwan<br />
06:00 pm All Roll-to-Roll Gravure Printed Rectenna as Wireless DC Power<br />
Supplier at 13.56MHz<br />
Ms Hyejin Park,<br />
Sunchon National University , M.S Student, South Korea<br />
06:00 pm Using the Halo Effect in Flexographic Printing for the Manufacturing<br />
of Source/Drain-Structures for Thin Film Transistors<br />
Ms Constanze Ranfeld,<br />
Technische Universität Darmstadt, Germany<br />
06:00 pm Multilayer Printed 3D Resistors Fabricated by an In-Line Inkjet<br />
Process For RFID<br />
Dr Mohamed Saadaoui,<br />
Ecole des Mines de Saint-Etienne, France<br />
06:00 pm Viscous fingering in functional flexo printing: an inevitable bug ?<br />
Dr Hans Martin Sauer,<br />
Technische Universität Darmstadt, Senior researcher, Germany<br />
06:00 pm Thick Film Gravure Printing Process for the Production of Catalyst<br />
Layers<br />
Mr Frank Siegel,<br />
Technische Universität Chemnitz, Germany<br />
page 16
Change language