Conference Program - LOPE-C 2011
Conference Program - LOPE-C 2011
Conference Program - LOPE-C 2011
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
INTERACTIVE SESSION | WEDNESDAY-JUNE 29, <strong>2011</strong> | LOCATION FOYER / LEVEL C2<br />
DEVICES<br />
06:00 pm Communication Quality of printed UHF RFID Transponder Antennas<br />
Mr Ralf Zichner,<br />
Fraunhofer Institute for Electronic Nano Systems ENAS, Germany<br />
DEVICE AND CIRCUITRY DESIGN, SIMULTATIONS<br />
06:00 pm Experimental Analyses and Numerical Studies of Crack Formation in<br />
Functional Printed Structures<br />
Mr Rolf Dieringer,<br />
TU Darmstadt, Dipl.-Ing., Germany<br />
06:00 pm Generalized Static Model for Printed Organic Transistors with Gate<br />
Leakage Current<br />
Mr Ramkumar Ganesan,<br />
TU Darmstadt, Phd Student, Germany<br />
06:00 pm Mass Characterisation of Organic Thin Film Transistors<br />
Mr Stefan Hengen,<br />
Mannheim University of Applied Sciences, Germany<br />
06:00 pm Multi-Frequency Transconductance Technique on OFET’s<br />
Mr Ingo Hörselmann,<br />
TU Ilmenau, Germany<br />
06:00 pm Organic Schottky Diodes based on Pentacene Derivatives<br />
Mr Waqas Mumtaz Syed,<br />
Fraunhofer EMFT, Research Engineer, Germany<br />
06:00 pm Layout to Bitmap: A layout design compensator and bitmap converter<br />
for Printed Electronics<br />
Mr Francesc Vila Garcia,<br />
IMB-CNM (CSIC), Spain<br />
MATERIALS<br />
06:00 pm Direct Aerosol Jet Printing of Fine Conductor and Transparent<br />
Dielectric Jumpers for Touch Screen Display Substrates<br />
Dr Dave Bohling,<br />
OPTOMEC Inc., V.P. of Engineering, United States<br />
06:00 pm Hardening of the coating with MoS2 nanotubes = more compact<br />
electronics structures<br />
Ms Andreja Jelen,<br />
J. Stefan Institute, University of Ljubljana, Slovenia<br />
06:00 pm Advances in conductive inks across multiple deposition platforms<br />
Dr Daniel Kirk,<br />
DuPont MCM, United Kingdom<br />
06:00 pm A Process Model To Predict Bow After Processing In Multilayer<br />
Structures<br />
Dr Bill MacDonald,<br />
DuPont Teijin Films, Business Research Associate, United Kingdom<br />
06:00 pm Suitability of different papers for printable electronics applications<br />
Prof. Dr Tadeja Muck,<br />
University of Ljubljana, Faculty of Natural Sciences and Engeneering, Associate<br />
Professor, Slovenia<br />
page 15
Change language