Conference Program - LOPE-C 2011
Conference Program - LOPE-C 2011
Conference Program - LOPE-C 2011
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
INTERACTIVE SESSION | WEDNESDAY-JUNE 29, <strong>2011</strong> | LOCATION FOYER / LEVEL C2<br />
DEVICES<br />
06:00 pm Printed Thin Film Batteries with New Material Systems<br />
Prof. Dr Reinhard R. Baumann,<br />
Fraunhofer ENAS, Germany<br />
06:00 pm ITO free organic solar cells made with low-cost spray coating<br />
technique of PEDOT:PSS.<br />
Dr Andrea Bernardi,<br />
eni S.p.A., Researcher, Italy<br />
06:00 pm Optimal Preparation Condition of Poly(3-hexylthiophene) Solution for<br />
Organic Thin-Film Transistors<br />
Prof. J.-W. John Cheng,<br />
National Chung Cheng University, Associate Professor, Taiwan<br />
06:00 pm Thick-film electroluminescent AND-type optoelectronic logical gate<br />
Dr Michal Ciez,<br />
Institut of Electron Technology, Head of Microelectronics Department, Poland<br />
06:00 pm Inkjet Printed Graphene-PEDOT:PSS Layers for Electrochemical<br />
Sensing<br />
Dr Adisorn Tuantranont,<br />
NECTEC (ICA Lab.) , Lab Director, Thailand<br />
06:00 pm Dynamic Modeling of Zinc Oxide Thin Film Transistors (ZnO-TFTs)<br />
Ms Chang Liu,<br />
TU-Darmstadt, Germany<br />
06:00 pm Inkjet Printing of Silver on Flexible Substrates for Sensing<br />
Applications<br />
Mr Francisco Molina-Lopez,<br />
EPFL, PhD student, Switzerland<br />
06:00 pm Inkjet printing polymer tandem solar cells<br />
Dr Ton Offermans,<br />
CSEM, Switzerland<br />
06:00 pm Innovative Micro Conductors for Flexible and Wearable Electronics<br />
Dr Rathna Perera,<br />
EY Technologies, Engineering Director, United States<br />
06:00 pm Semi-transparent polymer photovoltaic devices with good<br />
transparency color perception and color rendering properties<br />
Mr Andreas Puetz,<br />
Karlsruhe Institute of Technology, Germany<br />
06:00 pm Organic and oxide ferroelectric transistor and diode arrays for<br />
non-volatile memories.<br />
Dr Albert van Breemen,<br />
Holst Centre/TNO, Senior Researcher, Netherlands<br />
06:00 pm Fabrication and mechanical characterisation of inkjet printed strain<br />
gauges<br />
Dr H.A. (Roy) Visser,<br />
University of Twente, Assistant professor, Netherlands<br />
06:00 pm Towards functional modelling and reliability assessment of silkscreen<br />
printed passives under environmental loadings<br />
Mr Juha-Veikko Voutilainen,<br />
University of Oulu, Researcher, Finland<br />
06:00 pm Scalability on Roll-to-Roll Gravure Printed Dielectric Layers for<br />
Printed Thin Film Transistors<br />
Ms Minjin Yi,<br />
Sunchon National University, South Korea<br />
page 14
Change language