YVAA Style A Air-Cooled Screw Liquid Chillers ... - Johnson Controls

More documents

Recommendations

Info

SECTION 3 - HANDLING AND STORAGE LIFTING UNIT Container lugs should be inserted into the holes provided in the bottom of the frame rail. Use spreader bars to avoid lifting chains hitting the chiller. Various methods of spreader bar arrangements may be used; keeping in mind the intent is to keep the unit stable and to keep the chains from hitting the chiller and causing damage. FIGURE 4 - PROPER LIFTING OF <strong>YVAA</strong> CHILLER 20 FORM 201.28-NM1.1 ISSUE DATE: 8/29/2012 Never lift the chiller using a forklift or by hooking to the top rails. Use only the lifting holes provided. Lifting instructions are placed on a label on the chiller and on the shipping bag. JOHNSON CONTROLS
FORM 201.28-NM1.1 ISSUE DATE: 8/29/2012 UNIT REMOVAL FROM SHIPPING CONTAINER 1. Place a clevis pin into the holes provided at the end of each base rail on the unit. Attach chains or nylon straps through the clevis pins and hook onto a suitable lift truck for pulling the unit out of the container.(chain shown) 2. Slowly place tension on the chains or straps until the unit begins to move and then slowly pull the unit from the container. Be sure to pull straight so the sides do not scrape the container. 3. Place a lifting fixture on the forks of the lift truck and reattach the chain or strap. Slightly lift the front of the unit to remove some weight from the floor of the container. Continue pulling the unit with an operator on each side to guide the lift truck operator. 4. Pull the unit until the lifting locations are outside of the container. Place 4 X 4 blocks of wood under the base rails of the unit. Gently rest the unit on the blocks and remove the chains and lift truck. 5. Attach lifting rigging from the crane and slowly complete the removal from the container then lift up and away. SECTION 3 - HANDLING AND STORAGE JOHNSON CONTROLS 21 3
Page 1 and 2: AIR-COOLED SCREW LIQUID CHILLERS IN
Page 3 and 4: FORM 201.28-NM1.1 ISSUE DATE: 8/29/
Page 19: FORM 201.28-NM1.1 ISSUE DATE: 8/29/
Page 71 and 72:
FORM 201.28-NM1.1 ISSUE DATE: 8/29/
Page 73 and 74:
Page 75 and 76:
FORM 201.28-NM1.1 SECTION 5 - TECHN
Page 77 and 78:
FORM 201.28-NM1.1 SECTION 5 - TECHN
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
show all

YVAA Style A Air-Cooled Screw Liquid Chillers ... - Johnson Controls

Create successful ePaper yourself

Delete template?

Save as template?