20.01.2013 Views

SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.

SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.

SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

SMA Solar Technology AG Archiving Data on a SD Card<br />

11.6 Updating the Firmware<br />

The firmware of the <strong>Sun</strong>ny Island can be updated using the SD card. When the <strong>Sun</strong>ny Island starts up<br />

or when the SD card is inserted, the <strong>Sun</strong>ny Island searches for special update files on the SD card.<br />

If it finds files containing new firmware versions, it performs an update when the <strong>Sun</strong>ny Island is in<br />

standby mode.<br />

Proceed as follows for a firmware update:<br />

Take note of:<br />

• You may only download firmware versions from www.SMA.de/en. Using<br />

unauthorized firmware versions cancels the warranty.<br />

• None of the already existing parameter settings are changed or erased during a<br />

firmware update.<br />

• New parameters are assumed with default values.<br />

• If there is an update to firmware version greater or equal to 5 000, the battery<br />

management is automatically reset. This means that some of the set parameters for<br />

the battery management are lost.<br />

• Do not activate the DC circuit breaker during the firmware update.<br />

• Updating the firmware or single-phase systems takes approximately 5 minutes.<br />

• Do not switch off the <strong>Sun</strong>ny Island during the firmware update.<br />

• Updates in systems with a master and slaves can take up to 20 minutes. A progress<br />

bar is shown on the master display.<br />

• The slave update starts approximately 5 minutes after the master update.<br />

• An equalization charge is automatically initialized after the firmware update.<br />

1. Create a backup copy of the existing parameter lists (see section 11.3 ”Saving and Loading<br />

Parameters” (page 87)).<br />

2. Download the current version of the firmware from the Internet at www.SMA.de/en.<br />

3. Copy the "UPDATE.BIN" file onto the SD card.<br />

4. Set the master device to standby.<br />

5. Insert the SD card in the master's slot.<br />

☑ The update is carried out.<br />

Reset after a successful update<br />

After the update has been successfully completed a reset is enforced in order for the<br />

changes to become effective. After the reset, the master device remains in standby mode.<br />

6. Press and hold .<br />

☑ The <strong>Sun</strong>ny Island starts. The update is carried out.<br />

<strong>Technical</strong> <strong>Description</strong> SI<strong>5048</strong>-TB-TEN110340 89

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!