SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.

More documents

Recommendations

Info

Archiving Data on a SD Card SMA Solar Technology AG 11.5 Status Messages Using the "312.07 CardStt" parameter, you can request the status of your SD card: Display Description The SD card is deactivated. The SD card is activated. The memory capacity of your SD card has been exceeded. The SD card has an invalid file format. The SD card is not compatible. Your Sunny Island is loading parameters from the SD card. Loading parameters from SD card has failed. The SD card is being accessed. The Sunny Island is writing log data onto the SD card. 88 SI5048-TB-TEN110340 Technical Description
SMA Solar Technology AG Archiving Data on a SD Card 11.6 Updating the Firmware The firmware of the Sunny Island can be updated using the SD card. When the Sunny Island starts up or when the SD card is inserted, the Sunny Island searches for special update files on the SD card. If it finds files containing new firmware versions, it performs an update when the Sunny Island is in standby mode. Proceed as follows for a firmware update: Take note of: • You may only download firmware versions from www.SMA.de/en. Using unauthorized firmware versions cancels the warranty. • None of the already existing parameter settings are changed or erased during a firmware update. • New parameters are assumed with default values. • If there is an update to firmware version greater or equal to 5 000, the battery management is automatically reset. This means that some of the set parameters for the battery management are lost. • Do not activate the DC circuit breaker during the firmware update. • Updating the firmware or single-phase systems takes approximately 5 minutes. • Do not switch off the Sunny Island during the firmware update. • Updates in systems with a master and slaves can take up to 20 minutes. A progress bar is shown on the master display. • The slave update starts approximately 5 minutes after the master update. • An equalization charge is automatically initialized after the firmware update. 1. Create a backup copy of the existing parameter lists (see section 11.3 ”Saving and Loading Parameters” (page 87)). 2. Download the current version of the firmware from the Internet at www.SMA.de/en. 3. Copy the "UPDATE.BIN" file onto the SD card. 4. Set the master device to standby. 5. Insert the SD card in the master's slot. ☑ The update is carried out. Reset after a successful update After the update has been successfully completed a reset is enforced in order for the changes to become effective. After the reset, the master device remains in standby mode. 6. Press and hold . ☑ The Sunny Island starts. The update is carried out. Technical Description SI5048-TB-TEN110340 89
Page 1:
Off-Grid Inverter SUNNY ISLAND 5048
Page 4 and 5:
Table of Contents SMA Solar Technol
Page 6 and 7:
Page 8 and 9:
Page 10 and 11:
Page 12 and 13:
Notes on this Manual SMA Solar Tech
Page 14 and 15:
The Sunny Island 5048 SMA Solar Tec
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Safety Instructions SMA Solar Techn
Page 24 and 25:
Mounting SMA Solar Technology AG 4
Page 26 and 27:
Mounting SMA Solar Technology AG 4.
Page 28 and 29:
Opening and Closing SMA Solar Techn
Page 30 and 31:
Electrical Connection SMA Solar Tec
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39: Electrical Connection SMA Solar Tec
Page 54 and 55: Control Elements SMA Solar Technolo
Page 56 and 57: Initial Start-up SMA Solar Technolo
Page 62 and 63: Switching On and Off SMA Solar Tech
Page 64 and 65: Switching On and Off SMA Solar Tech
Page 66 and 67: Operation SMA Solar Technology AG 1
Page 68 and 69: Operation SMA Solar Technology AG O
Page 74 and 75: Operation SMA Solar Technology AG I
Page 78 and 79: Operation SMA Solar Technology AG "
Page 80 and 81: Operation SMA Solar Technology AG S
Page 84 and 85: Archiving Data on a SD Card SMA Sol
Page 92 and 93: Additional Functions SMA Solar Tech
Page 98 and 99: Battery Management SMA Solar Techno
Page 108 and 109: Connecting External Sources SMA Sol
Page 130 and 131: Relays SMA Solar Technology AG 15 R
Page 132 and 133: Multicluster Operation SMA Solar Te
Page 138 and 139:
Multicluster Operation SMA Solar Te
Page 140 and 141:
PV Inverters in Stand-alone Grid Sy
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Parameter lists SMA Solar Technolog
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Troubleshooting SMA Solar Technolog
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Accessories SMA Solar Technology AG
Page 218 and 219:
Technical Data SMA Solar Technology
Page 220:
Contact SMA Solar Technology AG 23
Page 224:
��
show all

SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.

Create successful ePaper yourself

Delete template?

Save as template?