SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.
SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.
SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SMA Solar Technology AG Archiving Data on a SD Card<br />
11 Archiving Data on a SD Card<br />
The <strong>Sun</strong>ny Island can store firmware, parameters and measured data on a SD card, which must be<br />
FAT-16-formatted and may have a maximum size of 2 GB (possible storage sizes are 32/64/128/<br />
256/512 MB and 1 GB and 2 GB). Use the SD card included in delivery solely for the <strong>Sun</strong>ny Island.<br />
Do not save any multimedia data on the SD card.<br />
File names are saved in 8.3 format and files with other designations are ignored.<br />
Example of a format<br />
A valid 8.3 format is, for example, "M1111LOG.DAT".<br />
8.3 is the "old" MS-DOS format with a file name that has a maximum of 8 figures before<br />
and 3 figures after the dot.<br />
Type of Memory Card<br />
SMA Solar Technology recommends using SD cards manufactured by Transcend.<br />
If you use a memory card from another manufacturer, check whether the card is FAT-16<br />
formatted. If necessary, format the card. Be aware that data stored on the card will be lost.<br />
After you have inserted the SD card into the card reader slot on your PC, you can search for the<br />
respective drive in the Explorer (in Microsoft <strong>Wind</strong>ows). The following data are on this drive (here E:):<br />
<strong>Technical</strong> <strong>Description</strong> SI<strong>5048</strong>-TB-TEN110340 83
Change language