SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.

SMA Solar Technology AG Switching On and Off
4. Wait 5 seconds.
☑ The Sunny Island skips the QCG and the
notification shown here is displayed.
5. Press and hold .
☑ The remaining time is displayed as a bar.
☑ On a slave, the notification displayed here is
shown until the master is started.
6. Press on the master.
☑ A beep is heard. The Sunny Island is in operation and the green (top) LED is on.
9.2 Stopping the Sunny Island (Standby)
Standby
Even in standby mode the Sunny Island still requires approx. 4 W of power from the
battery.
Proceed as follows to stop the Sunny Island:
1. Press or to stop the Sunny Island.
☑ The notification shown here is displayed.
2. Press and hold .
☑ The remaining time is displayed as a bar.
☑ The Sunny Island is stopped. The notification shown
here is displayed.
Technical Description SI5048-TB-TEN110340 63