SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.
SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.
SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SMA Solar Technology AG Control Elements<br />
7.3 Buttons<br />
The table explains the functions of the buttons on the <strong>Sun</strong>ny Island:<br />
Button Function<br />
cancels the selected function<br />
answers NO<br />
navigates one menu level higher<br />
stops device (when held pressed down)<br />
navigates up one list element, increases data value<br />
7.4 Meaning of the Light Emitting Diodes (LED's)<br />
On the <strong>Sun</strong>ny Island control panel, there are both a green (above) and a red (below) light emitting<br />
diode (LED), the functions of which are described in the table below:<br />
7.5 SD Card<br />
navigates down one list element, decreases data value<br />
selects function<br />
selects value<br />
confirms change<br />
answers YES<br />
navigates one menu level down<br />
starts device (when held pressed down)<br />
stops device (when held pressed down)<br />
Green LED Red LED Operating condition<br />
– – Standby or off (no inverter operation)<br />
ON – Operation<br />
– ON Disturbance or Fault<br />
ON ON Initialization<br />
The <strong>Sun</strong>ny Island features an SD card which can be used for updating firmware and as a service<br />
interface. For details, see section 11 ”Archiving Data on a SD Card” (page 83).<br />
<strong>Technical</strong> <strong>Description</strong> SI<strong>5048</strong>-TB-TEN110340 55
Change language