SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.

Opening and Closing SMA Solar Technology AG
5 Opening and Closing
The enclosure of the Sunny Island has a removable lid. Remove the enclosure lid only when installing
the device or for required maintenance or repair work.
5.1 Opening the Sunny Island
1. Stop the Sunny Island as described in section 9.2 ”Stopping the Sunny Island (Standby)”
(page 63).
2. Disconnect the Sunny Island from voltage sources as described in section 9.4 ”Disconnecting
the Device from Voltage Sources” (page 64).
3. Ensure that the system cannot be accidentally switched on again.
4. Loosen all 6 screws on the enclosure lid and set
them aside.
5. Remove the lid and set it aside.
☑ The Sunny Island is open.
28 SI5048-TB-TEN110340 Technical Description