SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.

SMA Solar Technology AG Mounting
2. Secure the wall mounting bracket to the wall using
appropriate screws and washers.
3. Hang the Sunny Island onto the wall mounting
bracket using the opening for this purpose in its
back panel.
4. Screw the Sunny Island to the wall mounting
bracket on both sides using the screws (M6x8)
provided. Only tighten the screws by hand.
☑ The Sunny Island is now mounted on the wall.
5. Make sure that the device is securely in place.
6. Close the recessed grips with the fan grills
provided. To help you identify the sides, the
ventilation grids are marked with "links/left" or
"rechts/right" on the inside.
Technical Description SI5048-TB-TEN110340 27