SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.
SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.
SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SMA Solar Technology AG Troubleshooting<br />
Interrupt the emergency charge mode, e.g., in order to refill diesel:<br />
1. Press to stop the <strong>Sun</strong>ny Island.<br />
☑ The notification shown here is displayed.<br />
2. Press and hold .<br />
☑ The remaining time is displayed as a bar.<br />
☑ The emergency charging mode is interrupted. The<br />
notification shown here is displayed.<br />
Prematurely ending the Emergency Charge Mode<br />
In order to exit the emergency charge mode early, the <strong>Sun</strong>ny Island must be restarted with<br />
the "510.01 InvRs" parameter.<br />
In emergency charge mode, process values are shown in the display. Parameters cannot be changed<br />
during the charging process. If the device is restarted, the settings that were saved before the ECM<br />
are loaded.<br />
Bridge between AC1 and AC2<br />
After emergency charge mode has been completed make sure to remove the bridge<br />
between AC1 and AC2!<br />
Restarting<br />
Observe information for restarting and wait for five minutes (see also section<br />
9.5 ”Reactivating the Device Following Automatic Shutdown” (page 64)).<br />
<strong>Technical</strong> <strong>Description</strong> SI<strong>5048</strong>-TB-TEN110340 215
Change language