SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.
SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.
SUNNY ISLAND 5048 - Technical Description - Wind & Sun Ltd.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SMA Solar Technology AG Maintenance and Care<br />
18 Maintenance and Care<br />
The <strong>Sun</strong>ny Island has been constructed for low maintenance. Thus, the necessary work is limited to<br />
only a few points.<br />
18.1 Enclosure<br />
Check that the <strong>Sun</strong>ny Island enclosure is mechanically sound. If damage (e.g. cracks, holes, missing<br />
covers) endangers the operating safety, the <strong>Sun</strong>ny Island must be deactivated immediately.<br />
Larger particles of dirt should be removed from the device with a soft brush or similar item. Dust can<br />
be removed with a damp cloth. Never use solvents, abrasives or corrosive materials for cleaning!<br />
18.2 Cleaning the Fans<br />
The cleaning intervals depend on the ambient conditions. If the fans are covered with loose dust, you<br />
can clean them with the aid of a vacuum cleaner (recommended) or a soft paint brush/hand brush.<br />
Clean the fans only when at a standstill. If it is necessary to replace the fans, please contact your<br />
installer.<br />
18.3 Display<br />
It is best to clean the control elements with a soft, damp cloth. Never use solvents, abrasives or<br />
corrosive materials for cleaning!<br />
Take care not to accidentally press the membrane buttons during cleaning. Only clean the membrane<br />
keypad when the <strong>Sun</strong>ny Island is deactivated.<br />
18.4 Function<br />
Check regularly whether fault indications are present. If an error message is displayed, for which you<br />
cannot identify any apparent cause, the stand-alone grid must be inspected by an installer. To ensure<br />
optimal operation, the operator should regularly check the <strong>Sun</strong>ny Island's entries in the error list at<br />
short intervals (monthly, or even weekly), especially during the first months after commissioning.<br />
This can help to discover hidden faults in the installation or errors in the configuration.<br />
18.5 Battery<br />
Inspect and maintain the battery at regular intervals. In this regard, observe all of the battery<br />
manufacturer's specifications.<br />
18.6 Disposal<br />
Dispose of the <strong>Sun</strong>ny Island at the end of its service life in accordance with the disposal regulations<br />
for electronic waste which apply at the installation site at that time. Alternatively, send the devices<br />
back to SMA Solar Technology with shipping paid by sender, and labeled "ZUR ENTSORGUNG"<br />
("FOR DISPOSAL") (section 23 ”Contact” (page 220)).<br />
<strong>Technical</strong> <strong>Description</strong> SI<strong>5048</strong>-TB-TEN110340 145
Change language