Norm Titel (deutsch): Ersch.-Jahr Titel (englisch): DIN 1409 ...

Norm Titel (deutsch): Ersch.-Jahr Titel (englisch):
DIN 1409 Räumwerkzeuge aus Schnellarbeitsstahl - Technische Lieferbedingungen 2000-07 High-speed steel broaching tools - Technical delivery conditions
DIN 1415-1 Räumwerkzeuge; Einteilung, Benennungen, Bauarten 1973-09 Broaches; classification, nomenclature, designs
DIN 1415-3 Räumwerkzeuge; Runde Schäfte A und B 1970-08 Broaching tools; round shanks A and B
DIN 1415-4 Räumwerkzeuge; Runde Endstücke C und D 1970-08 Broaching tools; round end pieces C and D
DIN 1415-5 Räumwerkzeuge; Rechteckige Schäfte E und Endstücke F (Nicht für Nabennuten) 1970-08 Broaching tools; rectangular shanks E and end pieces F (not vor internal splines)
DIN 1415-6 Räumwerkzeuge; Rechteckige Schäfte G mit gerader Mitnahmefläche (Für Nabennuten) 1970-08 Broaching tools; rectangular shanks G with perpendicular driving plane (for internal splines)
DIN 1416 Räumwerkzeuge; Gestaltung von Schneidzahn und Spankammer 1971-11 Broaching tools; design of tooth and tooth space
DIN 1417-1 Räumwerkzeuge; Runde Schäfte J und K mit schräger Mitnahmefläche 1970-08 Broaching tools; round shanks J and K with inclined driving plane
DIN 1417-2 Räumwerkzeuge; Runde Endstücke L und M 1970-08 Broaching tools; round end pieces L and M
DIN 1417-3 Räumwerkzeuge; Rechteckige Schäfte N mit schräger Mitnahmefläche (Nicht für Nabennuten) 1970-08 Broaching tools; rectangular shanks N with inclined driving plane (not for internal splines)
DIN 1417-4 Räumwerkzeuge; Rechteckige Endstücke P (Nicht für Nabennuten) 1970-08 Broaching tools; rectangular end pieces P (not for internal splines)
DIN 1417-5 Räumwerkzeuge; Rechteckige Schäfte R mit schräger Mitnahmefläche (Für Nabennuten) 1970-08 Broaching tools; rectangular shanks R with inclined driving plane (for internal splines)
DIN 1417-6 Räumwerkzeuge; Rechteckige Endstücke S (Für Nabennuten) 1970-08 Broaching tools; rectangular end pieces S (for internal splines)
DIN 1418-1 Halter für Räumwerkzeuge mit Schäften und Endstücken nach DIN 1417; Schafthalter 1970-08 Holders for broaching tools with shanks and end pieces to DIN 1417; shank holders
DIN 1418-2 Halter für Räumwerkzeuge mit Schäften und Endstücken nach DIN 1417; Endstückhalter 1972-01 Holders for broaching tools with shanks and end pieces to DIN 1417; endpiece holders
DIN 1419 Innen-Räumwerkzeuge mit auswechselbaren Rundräumbuchsen; Hauptmaße 1970-08 Broaching tools; internal-broaching tools with exchangeable broaching bushes; main dimensions
DIN 5480-1 Passverzahnungen mit Evolventenflanken und Bezugsdurchmesser - Teil 1: Grundlagen 2006-03 Involute splines based on reference diameters - Part 1: Generalities
DIN 5480-2 Passverzahnungen mit Evolventenflanken und Bezugsdurchmesser - Teil 2: Nennmaße und Prüfmaße 2006-05 Involute splines based on reference diameters - Part 2: Nominal and inspection dimensions
DIN 5480-15 Passverzahnungen mit Evolventenflanken und Bezugsdurchmesser - Teil 15: Qualitätsprüfung 2006-03 Involute splines based on reference diameters - Part 15: Inspection
DIN 5480-15 Passverzahnungen mit Evolventenflanken und Bezugsdurchmesser - Teil 15: Qualitätsprüfung,
Berichtigung 1 Berichtigung zu DIN 5480-15:2006-03 2009-01 Involute splines based on reference diameters - Part 15: Inspection, Corrigendum to DIN 5480-15:2006-03
DIN 5480-16 Passverzahnungen mit Evolventenflanken und Bezugsdurchmesser - Teil 16: Werkzeuge 2006-03 Involute splines based on reference diameters - Part 16: Tools
DIN 5480-16 Passverzahnungen mit Evolventenflanken und Bezugsdurchmesser - Teil 16: Werkzeuge,
Berichtigung 1 Berichtigung zu DIN 5480-16:2006-03 2009-01 Involute splines based on reference diameters - Part 16: Tools, Corrigendum to DIN 5480-16:2006-03
DIN 8589-5 Fertigungsverfahren Spanen - Teil 5: Räumen; Einordnung, Unterteilung, Begriffe 2003-09 Manufacturing processes chip removal - Part 5: Broaching; Classification, subdivision, terms and definitions
DIN 8665 Werkzeugmaschinen; Senkrecht-Außenräummaschinen; Abnahmebedingungen 1983-08 Machine tools; vertical surface type broaching machines; acceptance conditions
DIN 8666 Werkzeugmaschinen; Waagerecht-Außenräummaschinen; Abnahmebedingungen 1983-08 Machine tools; horizontal external type broaching machines; acceptance conditions
DIN 8667 Werkzeugmaschinen; Senkrecht-Innenräummaschinen; Abnahmebedingungen 1983-08 Machine tools; vertical internal type broaching machines; acceptance conditions
DIN 8668 Werkzeugmaschinen; Waagerecht-Innenräummaschinen; Abnahmebedingungen 1983-08 Machine tools; horizontal internal broaching machines; acceptance conditions
Englisch
Norm Titel (deutsch): Ersch.-Jahr Titel (englisch):
BS 4656-13 Genauigkeit von Werkzeugmaschinen und Pruefverfahren - Senkrechtaussenraeummaschinen 30.11.1983 Accuracy of machine tools and methods of test - Specification for broaching machines, vertical surface type
BS 4656-14 Genauigkeit von Werkzeugmaschinen und Pruefverfahren - Senkrechtinnenraeummaschinen 30.11.1983 Accuracy of machine tools and methods of test - Specification for broaching machines, vertical internal type
BS 4656-18
Genauigkeit von Werkzeugmaschinen und Pruefverfahren - Spezifikation fuer horizontale Innen-
Raeummaschinen 31.08.1981 Accuracy of machine tools and methods of test - Specification for broaching machines, horizontal internal type
BS 5326 Innenraeumwerkzeuge und Zugfutterlage 30.04.1976 Specification - Internal broaching tools and pull chuck locations
ISO 6480 Abnahmebedingungen für Waagerecht-Innenräummaschinen - Genauigkeitsprüfung. 1983-04 Conditions of acceptance for horizontal internal broaching machines - Testing of the accuracy.
ISO 6481 Abnahmebedingungen für Senkrecht- Aussenräummaschinen - Genauigkeitsprüfung. 1981-10 Acceptance conditions for vertical surface type broaching machines - Testing of accuracy.
ISO 6779 Abnahmebedingungen für Senkrecht-Innenräummaschinen - Genauigkeitsprüfung. 1981-09 Acceptance conditions for broaching machines of vertical internal type - Testing of accuracy.
JIS B 0175 Broaches - Vocabulary 20.12.1996 Broaches - Vocabulary
JIS B 4237 Dimensions of pull and follower ends of broach 01.02.1987 Dimensions of pull and follower ends of broach
JIS B 4238
JIS B 4238
Keyway broaches 20.12.1999 Keyway broaches
/AMENDMENT1 Keyway Broaches (Amendment 1) 20.02.2009 Keyway Broaches (Amendment 1)
JIS B 4239
JIS B 4239
Involute spline broaches 20.12.1999 Involute spline broaches
/AMENDMENT1 Involute spline broaches (Amendment 1) 20.02.2009 Involute spline broaches (Amendment 1)
Französisch
Norm
NF E60-141;
Titel (deutsch): Ersch.-Jahr Titel (englisch):
NF ISO 6480
NF E60-142;
Abnahmebedingungen für Waagerecht-Innenräummaschinen - Genauigkeitsprüfung. 01.12.2006 Conditions of acceptance for horizontal internal broaching machines - Testing of the accuracy.
NF ISO 6779
NF E60-143;
Abnahmebedingungen für Senkrecht-Innenräummaschinen - Genauigkeitsprüfung. 01.02.2006 Acceptance conditions for broaching machines of vertical internal type - Testing of accuracy.
NF ISO 6481 Abnahmebedingungen für Senkrecht- Aussenräummaschinen - Genauigkeitsprüfung.
WERKZEUGMASCHINEN. SENKRECHT. INNENRAEUMMASCHINEN. BEZEICHNUNG. MASSE.
01.02.2006 Acceptance conditions for vertical surface type broaching machines - Testing of accuracy.
NF E62-181 MERKMALE.
WERKZEUGMASCHINEN. WAAGERECHT. INNENRAEUMMASCHINEN. BEZEICNUNG. MASSE.
01.08.1983 Machine tools. Vertical internal broaching machines. Designation. Dimensions. Characteristics.
NF E62-182
NF E62-183
MERKMALE. 01.08.1983 Machine tools. Horizontal internal broaching machines. Designation. Dimensions. Characteristics.
SCHAFTHALTER MIT 4 MITNAHMEBOLZEN ZUM INNENRAEUMEN,ZIEHEND. TEIL 1 :
ALLGEMEINES. 01.08.1983 Pullers with 4 clamps for internal pull-type broaching. Part 1 : general.

NF E62-184
NF E62-185
NF E62-186
NF E62-187
NF E62-188
NF E62-189
SCHAFTHALTER MIT 4 MITNAHEMEBOLZEN ZUM INNENRAEUMEN,ZIEHEND. TEIL 2 :
ABMESSUNGEN UND CHARAKTERISTIKEN DER SCHAFTHALTER FUER RAEUMWERKZEUGE
VON DURCHMESSER 6 BIS 25. 01.08.1983
SCHAFTHALTER MIT 4 MITNAHMEBOLZEN ZUM INNENRAEUMEN,ZIEHEND. TEIL 3 :
ABMESSUNGEN UND CHARAKTERISTIKEN DER SCHAFTHALTER FUER RAEUMWERKZEUGE
VON DURCHMESSER 28 BIS 32 01.08.1983
SCHAFTHALTER MIT 4 MITNAHMEBOLZEN ZUM INNENRAEYMEN,ZIEHEND. TEIL 4 :
ABMESSUNGEN UND CHARAKTERISTIKEN DER SCHAFTHALTER FUER RAEUMWERKZEUGE
VON DURCHMESSER 36 BIS 40. 01.08.1983
SCHAFTHALTER MIT 4 MITNAHMEBOLZEN ZUM INNENRAEYMEN,ZIEHEND. TEIL 5 :
ABMESSUNGEN UND CHARAKTERISTIKEN DER SCHAFTHALTER FUER RAEUMWERKZEUGE
VON DURCHMESSER 40 BIS 50. 01.08.1983
SCHAFTHALTER MIT 4 MITNAHMEBOLZEN ZUM INNENRAEYMEN,ZIEHEND. TEIL 6 :
ABMESSUNGEN UND CHARAKTERISTIKEN DER SCHAFTHALTER FUER RAEUMWERKZEUGE
VON DURCHMESSER 56 BIS 63. 01.08.1983
Puller with 4 clamps for internal pull-type broaching. Part 2 : dimensions and characteristics of pullers for boraches of
diameters 6 to 25.
Pullers with 4 clamps for internal pull-type broaching. Part 3 : dimensions and characteristics of pullers for broaches of
diameters 28 to 32.
Puller with 4 clamps for internal pull-type broaching. Part 4 : dimensions and characteristics of pullers for broaches of
diameters 36 to 40.
Puller with 4 clamps for internal pull-type broaching. Part 5 : dimensions and characteristics of pullers for broaches of
diameters 40 to 50.
Puller with 4 clamps for internal pull-type broaching. Part 6 : dimensions and characteristics of pullers for broaches of
diameters 56 to 63.
SCHAFTHALTER MIT 4 MITNAHMEBOLZEN ZUM INNENRAEYMEN,ZIEHEND. TEIL 7 :
ABMESSUNGEN UND CHARAKTERISTIKEN DER SCHAFTHALTER FUER RAEUMWERKZEUGE
Puller with 4 clamps for internal pull-type broaching. Part 7 : dimensions and characteristics of pullers for broaches of
VON DURCHMESSER 70 BIS 80. 01.08.1983 diameters 70 to 80.
ENDSTUECKKOEPFE MIT ZWEI RIEGELFINGERN ZUM ZIEHRAUEMEN. ABMESSUNGEN UND
Tail end head with two catch fingers for pull broaching. Dimensions and characteristics of heads for broaching tools of
NF E62-190 KENNZEICHEN DER ENDSTUECKKOEPFEN FUER RAEUMWERKZEUGE DURCHMESSER 4 BIS 50.
WERKZEUGMASCHINEN. SCHAEFTE IT FORM W FUER INNEN-DRUECK-RAEUMWERKZEUGE.
01.02.1989 diameters 4 to 50.
NF E62-196 TEIL 1 : ALLGEMEINES.
WERKZEUGMASCHINEN. ENDSTUECKE MIT FORM U ODER V FUER INNEN-DRUECK-
01.09.1989 Machine-tools. Retriever for internal push type broaching with full ends, shape W. Part 1 : general.
NF E62-197 RAEUMWERKZEUGE. TEIL 1 : ALLGEMEINES. 01.09.1989 Machines-tools. Pushing head type uv for internal push type broaching with tail ends, shape U or V. Part 1 : general.
NF E66-611 INNEN. RAEUMWERKZEUGE. SCHAEFTE. 01.06.1983 Internal broaching tools. Pull ends.
NF E66-612 INNEN. RAEUMWERKZEUGE. ENDSTUECKE. 01.06.1983 Internal broaching tools. Tail ends.
NF E66-613 INNEN-RAEUMWERKZEUGE. DRUECK-RAEUMWERKZEUGE. SCHAEFTE FORM W,MASSE.
INNEN-RAEUMWERKZEUGE. DRUECK-RAEUMWERKZEUGE. ENDSTUECKE FORM U ODER
01.08.1989 Internal broaching tools. Pushed broaches. Dimensions of pull ends, shape W.
NF E66-614 V,MASSE. 01.08.1989 Internal broaching tools. Pushed broaches. Dimensions of tail ends, shapes U or V.
NF E66-620 RAEUMWERKZEUGE. FORMEN UND ABMESSUNGEN VON SCHNEIDZAHN UND SPANHAMMER. 01.06.1983 Broaching tools. Shapes and dimensions of broach teeth.
Russisch
Norm Titel:
Semiautomatic horisontal broaching machines. Basic parameters and dimensions. Standards of accuracy
Ersch.-Jahr Titel (englisch):
GOST 16015 and rigidity
Semiautomatic vertical broaching machines. Basic parameters and dimensions. Standards of accuracy
1991 Semiautomatic horisontal broaching machines. Basic parameters and dimensions. Standards of accuracy and rigidity
GOST 16025 and rigidity 1991 Semiautomatic vertical broaching machines. Basic parameters and dimensions. Standards of accuracy and rigidity
GOST 16491 Key broaches. Specifications 1980 Key broaches. Specifications
GOST 18217 Key broaches. Design 1990 Key broaches. Design
GOST 18218 Thick cored key broaches. Design 1990 Thick cored key broaches. Design
GOST 18219 Flat teeth key broaches. Design 1990 Flat teeth key broaches. Design
GOST 18220 Key broaches for higher class roughness. Design 1990 Key broaches for higher class roughness. Design
GOST 20364 Round broaches of variable cutting of diameters from 10 to 13 mm. Design and dimensions 1974 Round broaches of variable cutting of diameters from 10 to 13 mm. Design and dimensions
Broaches combined for b-slitting holes with straightside profile and centring at outside deameter,
Broaches combined for b-slitting holes with straightside profile and centring at outside deameter, alternatives. Design and
GOST 24818 alternatives. Design and dimensions 1981 dimensions
Broaches combined for 6-slitting holes with straightside profile and centring at outside diameter,
Broaches combined for 6-slitting holes with straightside profile and centring at outside diameter, alternatives. Double
GOST 24819 alternatives. Double driven. Design and dimensions 1981 driven. Design and dimensions
Broaches combined for 8-slitting holes with straight tside proile and centring at outside diameter,
Broaches combined for 8-slitting holes with straight tside proile and centring at outside diameter, alternatives. Design and
GOST 24820 alternatives. Design and dimensions 1981 dimensions
Broaches combined for 8-slitting holes with straightside profile and centring at outside diameter,
Broaches combined for 8-slitting holes with straightside profile and centring at outside diameter, alternatives. Double
GOST 24821 alternatives. Double driven. Design and dimensions 1981 driven. Design and dimensions
Broaches combined for 10-slitting holes with straightside profile and centring at outside diameter,
Broaches combined for 10-slitting holes with straightside profile and centring at outside diameter, alternatives. Design and
GOST 24822 alternatives. Design and dimension 1981 dimension
Broaches combined for 10-slitting holes with straightside profile and centring at outside diameter,
Broaches combined for 10-slitting holes with straightside profile and centring at outside diameter, alternatives. Donble
GOST 24823 alternatives. Donble driven. Design and dimensions 1981 driven. Design and dimensions
Broaches with diameter 12 and 14 mm for slitting holes with involute profile and centring at outside
Broaches with diameter 12 and 14 mm for slitting holes with involute profile and centring at outside diameter with modul 1
GOST 25157 diameter with modul 1 mm double driven. Construction and dimensions 1982 mm double driven. Construction and dimensions
Broaches with diameter from 15 to 90 mm for slitting holes with involute profile and centring at outside
Broaches with diameter from 15 to 90 mm for slitting holes with involute profile and centring at outside diameter with modul
GOST 25158 diameter with modul from 1 to 2,5 mm. Construction and dimensions 1982 from 1 to 2,5 mm. Construction and dimensions
Broaches with diameter frome 15 to 90 mm for slitting holes with involute profile and centring at outside
Broaches with diameter frome 15 to 90 mm for slitting holes with involute profile and centring at outside diameter with
GOST 25159 diameter with modul frome 1 to 2,5 mm, double driven. Construction and dimensions 1982 modul frome 1 to 2,5 mm, double driven. Construction and dimensions
Broaches with diameter frome 45 to 90 mm for slitting holes with involute profile and centring at outside
Broaches with diameter frome 45 to 90 mm for slitting holes with involute profile and centring at outside diameter with
GOST 25160 diameter with modul frome 3 to 5 mm. Construction and dimensions 1982 modul frome 3 to 5 mm. Construction and dimensions

Broaches with diameter frome 70 to 90 mm for slitting holes with involute profile and centring at outside
Broaches with diameter frome 70 to 90 mm for slitting holes with involute profile and centring at outside diameter with
GOST 25161 diameter with modul frome 3,5 to 5 mm. Double driven. Construction and dimensions 1982 modul frome 3,5 to 5 mm. Double driven. Construction and dimensions
Combined alternative broaches for 6 slitting holes with straightside profile and centring at inside diameter.
Combined alternative broaches for 6 slitting holes with straightside profile and centring at inside diameter. Design and
GOST 25969 Design and dimensions 1983 dimensions
Combined alternative double driven broaches for 6 slitting holes with straightside profile and centring at
Combined alternative double driven broaches for 6 slitting holes with straightside profile and centring at internal diameter.
GOST 25970 internal diameter. Design and dimensions 1983 Design and dimensions
Combined alternative broaches for 8 slitting holes with straightside profile and centring at internal
Combined alternative broaches for 8 slitting holes with straightside profile and centring at internal diameter. Design and
GOST 25971 diameter. Design and dimensions 1983 dimensions
Combined alternatives double driven broaches for 8 slitting holes with straightside profile and centring at
Combined alternatives double driven broaches for 8 slitting holes with straightside profile and centring at internal diameter.
GOST 25972 internal diameter. Design and dimensions 1983 Design and dimensions
Combined alternatives broaches for 10 slitting holes with straightside profile and centring at internal
Combined alternatives broaches for 10 slitting holes with straightside profile and centring at internal diameter. Design and
GOST 25973 diameter. Design and dimensions 1983 dimensions
Combined alternatives double driven broaches for 10 slitting holes with straighside profile and centring at
Combined alternatives double driven broaches for 10 slitting holes with straighside profile and centring at internal diameter.
GOST 25974 internal diameter. Design and dimensions 1983 Design and dimensions
GOST 26478 Double-pass square broaches for holes with sides from 10 to 12 mm. Design and dimensions 1985 Double-pass square broaches for holes with sides from 10 to 12 mm. Design and dimensions
GOST 26479 Double-pass square broaches for holes with sides from 12,5 to 60 mm. Design and dimensions 1985 Double-pass square broaches for holes with sides from 12,5 to 60 mm. Design and dimensions
GOST 26480 Square broaches for holes with sides from 25 to 41 mm. Design and dimensions 1985 Square broaches for holes with sides from 25 to 41 mm. Design and dimensions
GOST 28044 Internal broaches for straight splines based at internal diameter one pass combined type. Construction 1989 Internal broaches for straight splines based at internal diameter one pass combined type. Construction
GOST 28045 Internal broaches for straight splines based at internal diameter dauble pass combined type. Construction 1989 Internal broaches for straight splines based at internal diameter dauble pass combined type. Construction
GOST 28046 Internal broaches for straight splines based at internal diameter three pass combined type. Construction 1989 Internal broaches for straight splines based at internal diameter three pass combined type. Construction
GOST 28047 Internal broaches for straight splines based at internal diameter four pass combined type. Construction 1989 Internal broaches for straight splines based at internal diameter four pass combined type. Construction
Broaches with diameter from 50 to 120 mm for slitting holes with involute profile with round tail and
Broaches with diameter from 50 to 120 mm for slitting holes with involute profile with round tail and centring at outside
GOST 28048 centring at outside diameter with modul frome 1,5 to 2,5 mm. Construction 1989 diameter with modul frome 1,5 to 2,5 mm. Construction
Broaches with diameter from 90 to 120 mm for slitting holes with involute profile with round tail and
Broaches with diameter from 90 to 120 mm for slitting holes with involute profile with round tail and centring at outside
GOST 28049 centring at outside diameter with modul from 2,5 mm. Construction 1989 diameter with modul from 2,5 mm. Construction
Broaches with diameter from 55 to 130 mm for slitting holes with involute profile with round tail and
Broaches with diameter from 55 to 130 mm for slitting holes with involute profile with round tail and centring at outside
GOST 28050 centring at outside diameter with modul from 3 to 5 mm. Construction 1989 diameter with modul from 3 to 5 mm. Construction
Broaches with diameter from 70 to 130 mm for slitting holes with involute profile with round tail and
Broaches with diameter from 70 to 130 mm for slitting holes with involute profile with round tail and centring at outside
GOST 28051 centring at outside diameter with modul from 3 to 5 mm. Construction 1989 diameter with modul from 3 to 5 mm. Construction
GOST 28442 Broaches for cylindrical, slitting and polyhedral profile holes. Specifications 1990 Broaches for cylindrical, slitting and polyhedral profile holes. Specifications
GOST 4043 Flat shanks for broaches. Types and main dimensions 1970 Flat shanks for broaches. Types and main dimensions
GOST 4044 Round shanks for broaches. Types and main dimensions 1970 Round shanks for broaches. Types and main dimensions
Combined broaches with diameter from 50 to 120 mm for slitting holes with involute profile with wind
Combined broaches with diameter from 50 to 120 mm for slitting holes with involute profile with wind round tail and
GOST R 50035 round tail and centring at outside diameter with module from 1,5 to 2,5 mm. Construction 1992 centring at outside diameter with module from 1,5 to 2,5 mm. Construction
Combined broaches with diameter from 90 to 120 mm for slitting holes with involute profile with wind
Combined broaches with diameter from 90 to 120 mm for slitting holes with involute profile with wind round tail and
GOST R 50036 round tail and centring at outside diameter with module from 2,5 mm. Construction 1992 centring at outside diameter with module from 2,5 mm. Construction
Combined broaches with diameter from 55 to 130 mm for slitting holes with involute profile with wind
Combined broaches with diameter from 55 to 130 mm for slitting holes with involute profile with wind round tail and
GOST R 50037 round tail and centring at outside diameter with module from 3 to 4 mm. Construction 1992 centring at outside diameter with module from 3 to 4 mm. Construction
Combined broaches with diameter from 55 to 130 mm for slitting holes with involute profile with wind
Combined broaches with diameter from 55 to 130 mm for slitting holes with involute profile with wind round tail and
GOST R 50038 round tail and centring at outside dimeter with modul from 3 to 5. Construction 1992 centring at outside dimeter with modul from 3 to 5. Construction
Spanisch
Norm Titel: Ersch.-Jahr Titel (englisch):
CONDITIONS OF ACCEPTANCE FOR HORIZONTAL INTERNAL BROACHING MACHINES. TESTING
CONDITIONS OF ACCEPTANCE FOR HORIZONTAL INTERNAL BROACHING MACHINES. TESTING OF THE
UNE 15325 OF THE ACCURACY.
ACCEPTANCE CONDITIONS FOR VERTICAL SURFACE TYPE BROACHING MACHINES. TESTING
19.02.1993 ACCURACY.
UNE 15326 OF ACCURACY. 09.02.1993 ACCEPTANCE CONDITIONS FOR VERTICAL SURFACE TYPE BROACHING MACHINES. TESTING OF ACCURACY.
ACCEPTANCE CONDITIONS FOR BROACHING MACHINES OF VERTICAL INTERNAL TYPE.
ACCEPTANCE CONDITIONS FOR BROACHING MACHINES OF VERTICAL INTERNAL TYPE. TESTING OF THE
UNE 15327 TESTING OF THE ACCURACY. 12.02.1993 ACCURACY.