Simpson Anchors - Anchoring and Fastening Systems - BuildSite.com

C-SAS-2009 © 2009 SIMPSON STRONG-TIE COMPANY INC.
EPOXY-TIE ®
Estimating Guides
Estimating Guide for 8.5 oz. Cartridge using Threaded Rod - Installations per Cartridge
Rod
Dia.
(in.)
Drill
Bit Dia.
(in.)
THREADED ROD IN SOLID BASE MATERIAL
HOLE DEPTH (inches)
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
3/8 7/16 67 45 34 27 22 19 17 15 13 12 11 10 10 9 8 8 7 7 7
3/8 1/2 42 28 21 17 14 12 11 9 8 8 7 7 6 6 5 5 5 4 4
1/2 9/16 49 32 24 19 16 14 12 11 10 9 8 7 7 6 6 6 5 5 5
1/2 5/8 31 20 15 12 10 9 8 7 6 6 5 5 4 4 4 4 3 3 3
5/8 3/4 24 16 12 10 8 7 6 5 5 4 4 4 3 3 3 3 3 3 2.4
5/8 7/8 14 9 7 5 5 4 3 3 3 2.5 2.3 2.1 2.0 1.8 1.7 1.6 1.5 1.4 1.4
3/4 7/8 19 13 10 8 6 6 5 4 4 4 3 3 3 3 2.4 2.3 2.1 2.0 1.9
3/4 1 12 8 6 5 4 3 3 3 2.3 2.1 1.9 1.8 1.7 1.5 1.4 1.4 1.3 1.2 1.2
7/8 1 16 11 8 6 5 5 4 4 3 3 3 2.5 2.3 2.2 2.0 1.9 1.8 1.7 1.6
7/8 1 1/8 10 6 5 4 3 3 2.4 2.2 1.9 1.8 1.6 1.5 1.4 1.3 1.2 1.1 1.1 1.0 1.0
1 1 1/8 13 9 7 5 4 4 3 3 3 2.4 2.2 2.1 1.9 1.8 1.7 1.6 1.5 1.4 1.3
1 1 1/4 8 6 4 3 3 2.4 2.1 1.9 1.7 1.5 1.4 1.3 1.2 1.1 1.1 1.0 0.9 0.9 0.8
1 1/8 1 1/4 12 8 6 5 4 3 3 3 2.3 2.1 1.9 1.8 1.6 1.5 1.4 1.4 1.3 1.2 1.2
1 1/8 1 3/8 7 5 4 3 2.5 2.1 1.9 1.6 1.5 1.3 1.2 1.1 1.1 1.0 0.9 0.9 0.8 0.8 0.7
1 1/4 1 3/8 10 7 5 4 3 3 3 2.3 2.1 1.9 1.7 1.6 1.5 1.4 1.3 1.2 1.2 1.1 1.0
1 1/4 1 1/2 7 4 3 3 2.2 1.9 1.7 1.5 1.3 1.2 1.1 1.0 1.0 0.9 0.8 0.8 0.7 0.7 0.7
Tables are estimations. Actual usage may vary depending on waste.
Estimating Guide for 8.5 oz. Cartridge using Rebar - Installations per Cartridge
Rebar
Size
(no.)
Drill
Bit Dia.
(in.)
REBAR IN SOLID BASE MATERIAL
HOLE DEPTH (inches)
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
3 7/16 90 60 45 36 30 26 22 20 18 16 15 14 13 12 11 11 10 9 9
3 1/2 50 34 25 20 17 14 13 11 10 9 8 8 7 7 6 6 6 5 5
4 9/16 74 49 37 30 25 21 18 16 15 13 12 11 11 10 9 9 8 8 7
4 5/8 39 26 20 16 13 11 10 9 8 7 7 6 6 5 5 5 4 4 4
5 3/4 32 21 16 13 11 9 8 7 6 6 5 5 5 4 4 4 4 3 3
5 7/8 16 11 8 6 5 5 4 4 3 3 3 2.4 2.3 2.1 2.0 1.9 1.8 1.7 1.6
6 7/8 25 17 13 10 8 7 6 6 5 5 4 4 4 3 3 3 3 3 3
6 1 13 9 7 5 4 4 3 3 3 2.5 2.2 2.1 1.9 1.8 1.7 1.6 1.5 1.4 1.3
7 1 22 15 11 9 7 6 6 5 4 4 4 3 3 3 3 3 2.4 2.3 2.2
7 1 1/8 11 8 6 5 4 3 3 3 2.3 2.1 1.9 1.8 1.6 1.5 1.4 1.4 1.3 1.2 1.1
8 1 1/8 19 13 9 8 6 5 5 4 4 3 3 3 3 3 2.4 2.2 2.1 2.0 1.9
8 1 1/4 10 7 5 4 3 3 3 2.3 2.1 1.9 1.7 1.6 1.5 1.4 1.3 1.2 1.2 1.1 1.0
9 1 1/4 17 11 8 7 6 5 4 4 3 3 3 3 2.4 2.3 2.1 2.0 1.9 1.8 1.7
9 1 3/8 9 6 5 4 3 3 2.3 2.1 1.9 1.7 1.6 1.4 1.3 1.2 1.2 1.1 1.0 1.0 0.9
10 1 1/2 9 6 5 4 3 3 2.3 2.0 1.8 1.6 1.5 1.4 1.3 1.2 1.1 1.1 1.0 0.9 0.9
10 1 3/4 4 3 2.2 1.8 1.5 1.3 1.1 1.0 0.9 0.8 0.7 0.7 0.6 0.6 0.6 0.5 0.5 0.5 0.4
11 1 5/8 9 6 4 3 3 2.5 2.2 1.9 1.7 1.6 1.4 1.3 1.2 1.2 1.1 1.0 1.0 0.9 0.9
11 1 7/8 4 3 2.1 1.7 1.4 1.2 1.1 0.9 0.9 0.8 0.7 0.7 0.6 0.6 0.5 0.5 0.5 0.4 0.4
Tables are estimations. Actual usage may vary depending on waste.
Estimating Guide for 8.5 oz. Cartridge and Steel Screen Tubes - Installations per Cartridge
Rod
Dia.
(in.)
Drill
Bit Dia.
(in.)
THREADED ROD INSERTED IN SCREEN TUBE
HOLE DEPTH (inches)
3 1/2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
3/8 9/16 19 17 13 11 9 8 7 7
1/2 11/16 12 10 8 7 6 5 5 4
5/8 7/8 7 6 5 4 3 3 3 2.4 2.2 2.0 1.8
3/4 1 5 4 4 3 3 2.2 2.0 1.8 1.6 1.5 1.4 1.3 1.2 1.1 1.0 1.0 0.9 0.9 0.8
Tables are estimations. Actual usage may vary depending on waste.
Estimating Guide for 8.5 oz Cartridge and Plastic Screen Tubes - Installations per Cartridge
Rod
Dia.
(in.)
Drill
Bit Dia.
(in.)
THREADED ROD INSERTED IN SCREEN TUBE
HOLE DEPTH (inches)
SET1.7KT & SET1.7KTA are not suitable
for screen tube installations.
3 1/2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
3/8 9/16 22 19 16 13 11 10 9 8
1/2 11/16 11 10 8 7 6 5 4 4
5/8 7/8 8 7 5 5 4 3 3 3 2.5 2.3 2.1
3/4 1 6 5 4 3 3 3 2.2 2.0 1.8 1.7 1.5 1.4 1.3 1.3 1.2 1.1 1.1 1.0 1.0
Tables are estimations. Actual usage may vary depending on waste.
Epoxy Adhesives
63