Simpson Anchors - Anchoring and Fastening Systems - BuildSite.com

F-SAS-CSAS2009 ©2011 Simpson Strong-Tie Company Inc.
Anchoring and Fastening Systems for Concrete and Masonry Addendum
GCN-MEP Fasteners and Accessories
GCN-MEP Gas-Actuated Pins and Assemblies for
Mechanical, Electrical and Plumbing (MEP) Applications
New, pre-assembled MEP fasteners are available for use with the GCN-MEP gas-actuated concrete nailer
designed for high-volume applications such as afixing conduit clips, rod hangers, cable ties and drywall track.
With their .300" heads, these versatile pins and assemblies can also be used with common powder-
actuated tools when fastening into harder substrates (structural steel or extra hard concrete) when required.
Mechanical, Electrical and Plumbing Pins
All pins are .125" diameter x 1" except where speciied.
Model No. Description Pack Qty. Compatible Gas-Actuated Nailer
GRH25-R100 ⁄4" Rod Hanger with .125 Dia. x 1" Length Pin 100 GCN-MEP
GRH37-R100 .125" Step Shank x 1" Length Pin 100 GCN-MEP
Model No. Description Pack Qty. Compatible Gas-Actuated Nailer
GCC50-R100 ⁄ " Conduit Clip w/ .125 Dia. x 1" Length Pin 100 GCN-MEP
GCC75-R100 ⁄4" Conduit Clip w/ .125 Dia. x 1" Length Pin 100 GCN-MEP
GCC100-R100 1" Conduit Clip w/ .125 Dia. x 1" Length Pin 100 GCN-MEP
GCC125-R100
1" Conduit Clip (13 Gauge Steel) w/ .125 Dia. x 1"
Length Pin
100 GCN-MEP
Model No. Description Pack Qty. Compatible Gas-Actuated Nailer
GCL50-R50 ⁄ " Conduit Clamp w/ .125 Dia. x 1" Length Pin 50 GCN-MEP
GCL75-R25 ⁄ " Conduit Clamp w/ .125 Dia. x 1" Length Pin 25 GCN-MEP
Model No. Description Pack Qty. Compatible Gas-Actuated Nailer
GAC-R100 Angle Clip w/ .125 Dia. x 1" Length Pin 100 GCN-MEP
Model No. Description Pack Qty. Compatible Gas-Actuated Nailer
GCT-R50 Tie Strap Holder w/ .125 Dia x 1" Length Pin 50 GCN-MEP
Model No. Description Pack Qty. Compatible Gas-Actuated Nailer
GW50-R200
⁄ " Dome Washer w/ .109"/ .125 Dia. x ⁄ " Length
Pin (Step Shank Pin)
200 GCN-MEP
GW75-R200 ⁄ " Dome Washer w/ .125 Dia. x ⁄ " Length Pin 200 GCN-MEP
GW100-R100 ⁄ " Dome Washer w/ .125" Dia. x 1" Length Pin 100 GCN-MEP
Model No. Description Pack Qty. Compatible Gas-Actuated Nailer
GTS45075-R200
⁄ -20 thread, ⁄ " length thread, ⁄ " length shank
(.125 dia shank)
200 GCN-MEP
Model No. Description Pack Qty. Compatible Gas-Actuated Nailer
GDPM-50KT
.109" / .125" Dia. Pin x ⁄ " Length Pin Note: .109"
Dia. is at Tip and is ⁄ " Long.
1000 GCN-MEP
GDPM-75KT .125" Dia. x ⁄ " Length Pin 1000 GCN-MEP
GDPM-100KT .125" Dia. x 1" Length Pin 1000 GCN-MEP
Model No. Description Pack Qty. Compatible Gas-Actuated Nailer
GBR2-R25 2" Dia. Ring, w/ .125" Dia. x 1" Length Pin 25 GCN-MEP
Model No. Description Pack Qty. Compatible Gas-Actuated Nailer
GTH-R200 .125" Dia. x 1" Length Pin 200 GCN-MEP
Fuel Cell
The GFC34 fuel cell is designed to operate with the GCN-MEP Gas-Actuated Concrete Nailer and also
works with many major brand gas concrete-nailer tools. The fuel cell provides 1,200 shots and can operate
at temperatures between 20°F–120°F (-6°C–49°C). The fuel cells are offered in a 2-per-pack clamshell.
Additionally, one fuel cell is included with each pack of 1,000 pins.
Gas Fuel Cells for the GCN-MEP
Model No. Description
Pack
Qty.
Packs/
Carton
GFC34-RC2 (2) 34 gram fuel cells 2 6
Compatible with these Tools
Simpson Strong-Tie ® GCN-MEP and GCN-150 Others:
TrakFast ® TF1100, Trak-It ® C3
GRH
GCC
GCL
GAC
GCT
GW
GTS
GDPM
GBR
GTH
GFC Fuel Cell
31