Simpson Anchors - Anchoring and Fastening Systems - BuildSite.com

More documents

Recommendations

Info

110 MECHANICAL ANCHORS Heavy-duty general purpose anchors for any base material: • Concrete • Concrete block (grouted and hollow) • • Brick Drywall High-performance anchors designed and tested for use in cracked or uncracked concrete • Optimum performance under static tension and shear loading • Proven results under Seismic and Wind loading • Ideal for demanding structural applications TESTED TO MEET IBC ® 2006 Blue Banger Hanger ® threaded rod hanger • Installs before the concrete pour • Provides high tension loads for overhead attachments • Each hanger capable of accepting multiple diameters of threaded rod C-SAS-2009 ©92009 SIMPSON STRONG-TIE COMPANY INC.
C-SAS-2009 © 2009 SIMPSON STRONG-TIE COMPANY INC. TORQ-CUT Self-Undercutting Anchor for Cracked and Uncracked Concrete The Torq-Cut self-undercutting anchor is a heavy-duty, high-capacity anchor designed and tested for use in cracked and uncracked concrete under static and seismic loading conditions. It is designed to meet the requirements that the 2006 IBC places on post-installed anchors. The built in ring with hardened cutters expands with installation torque forming undercut grooves in the concrete. This interlocking connection between the anchor and the concrete provides superior load carrying capacity. FEATURES: • Self-undercutting feature provides higher load carrying capacity than conventional mechanical anchors • AC193 code tested to ensure outstanding performance in both cracked and uncracked concrete • Excellent for resisting seismic and vibratory loads • Suitable for seismic applications categories A-F • Ductile steel rod provides consistent, reliable performance • Specially designed, low-friction wedge cone minimizes binding and speeds installation • Installs just like a conventional wedge anchor, no special tool, drill bit, or secondary drilling is required • The head is stamped with the Simpson Strong-Tie ® "≠" sign and size ID for easy post installation identifi cation MATERIAL: ASTM A193 grade B7 or B7M rod with SAE J403 grade 1144 expansion clip and cone FINISH: Zinc plated CODES: ICC-ES pending The load tables list values based upon results from the most recent testing and may not refl ect those in current code reports. Where code jurisdictions apply, consult the current reports for applicable load values. TEST CRITERIA: The Torq-Cut anchor has been tested in accordance with ICC-ES's Acceptance Criteria for Mechanical Anchors in Concrete Elements (AC193) and ACI 355.2 for the following: • Static tension and shear loading in cracked and uncracked concrete • Seismic and wind loading in cracked and uncracked concrete • Performance in cracked concrete INSTALLATION: Caution: Oversized holes in the base material will make it diffi cult to set the anchor and will reduce the anchor’s load capacity. • Do not use an impact wrench to set or tighten the Torq-Cut anchor. Installation Instructions: Pre-Set Version • Drill a hole in the base material to the specifi ed embedment depth using the appropriate diameter carbide drill bit specifi ed for each diameter. • Blow the hole clean using compressed air. • Assemble the anchor with nut and washer and fi nger tighten nut so all components are snug (spacer sleeve, expansion sleeve and cone). The bottom of the threaded rod should be fl ush with the bottom of the cone. • Place the anchor into the drilled hole and use a hammer and setting tube* to drive the anchor until the washer and nut are tight against the surface of the base material. • Remove the nut and washer and install the fi xture. Re-assemble the nut and washer over the fi xture. • Tighten to the required installation torque. Installation Instructions: Through-Set Version • Drill a hole in the base material to the specifi ed embedment depth using the appropriate diameter carbide drill bit specifi ed for each diameter. • Blow the hole clean using compressed air. • Assemble the anchor with nut and washer and fi nger tighten nut so all components are snug (spacer sleeve, expansion sleeve and cone). The bottom of the threaded rod should be fl ush with the bottom of the cone. • Place the anchor through the fi xture and into the drilled hole. Use a hammer and setting tube* to drive the anchor until the washer and nut are tight against the fi xture. • Tighten to the required installation torque. APPLICATION: • Interior environment where low levels of moisture and corrosive chemicals are present SUGGESTED SPECIFICATIONS: Self-undercutting anchors shall have an expansion ring with undercutting teeth which expands by tightening the nut that pushes the ring into a cone expander via a spacer sleeve. The anchor shall have been tested and qualifi ed for performance in cracked and uncracked concrete per ACI 355.2 and ICC-ES AC193. Undercut anchor shall be the Torq-Cut self-undercutting anchor from Simpson Strong-Tie, Pleasanton, CA, and be installed following the Simpson Strong-Tie instructions. Torq-Cut Self-Undercutting Anchor U.S. Patent 7,357,613 Pre-Set Through-Set TESTED TO MEET IBC ® 2006 Installation Sequence Setting Tube Setting Tube Torq-Cut Anchor Installation Data (Call for availability) Software Supported (Check latest software version or www.simpsonanchors.com for available support) *Setting tube is a metal spacer tube that prevents damage to the threaded portion of the anchor when the anchor is driven into the hole with a hammer. One setting tube is included with every box of anchors. Nominal Anchor Dia (in) ³⁄₈ ¹⁄₂ ⁵⁄₈ ³⁄₄ Drill Bit Size (in) ⁵⁄₈ ⁷⁄₈ 1 1¹⁄₄ Min. Fixture Hole Dia Pre-Set (in) ⁷⁄₁₆ ⁹⁄₁₆ ¹¹⁄₁₆ ¹³⁄₁₆ Min. Fixture Hole Dia Through-Set (in) ¹¹⁄₁₆ ¹⁵⁄₁₆ 1¹⁄₁₆ 1⁵⁄₁₆ Wrench Size (in) ⁹⁄₁₆ ³⁄₄ ¹⁵⁄₁₆ 1¹⁄₈ Mechanical Anchors 111
Page 1 and 2:
��
Page 3 and 4:
Building Codes Are Changing New Anc
Page 5 and 6:
C-SAS-2009 © 2009 SIMPSON STRONG-T
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 18 and 19:
18 ICC-ES AC308 ULTIMATE STRENGTH D
Page 20 and 21:
20 TREATMENT OF DESIGN METHODS UNDE
Page 22 and 23:
22 EXAMPLE CALCULATION Adhesive Anc
Page 24 and 25:
24 EXAMPLE CALCULATION Mechanical A
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
30 EXAMPLE CALCULATION Torque Contr
Page 32 and 33:
32 Continued from page 31. 3 4 ADHE
Page 34:
Epoxy Adhesives 34 SET-XP Structur
Page 39:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 59 and 60: C-SAS-2009 © 2009 SIMPSON STRONG-T
Page 93: C-SAS-2009 © 2009 SIMPSON STRONG-T
Page 98 and 99: Vinylester Adhesive 98 VGC Technica
Page 100 and 101: Crack Injection 100 ETI Injection E
Page 102 and 103: Crack Injection 102 CRACK-PAC ® 1.
Page 104 and 105: Crack Injection 104 EPOXY-TIE ® Tr
Page 106 and 107: Crack Injection 106 CRACK-PAC ® CA
Page 108 and 109: Crack Injection 108 CRACK-PAC ® In
Page 112 and 113: Mechanical Anchors 112 TORQ-CUT Se
Page 114 and 115: Mechanical Anchors 114 TORQ-CUT Se
Page 116: Mechanical Anchors 116 STRONG-BOLT
Page 121: C-SAS-2009 © 2009 SIMPSON STRONG-T
Page 128 and 129: Mechanical Anchors 128 TITEN HD ®
Page 130 and 131: Mechanical Anchors 130 TITEN HD ®
Page 144: Mechanical Anchors 144 WEDGE-ALL ®
Page 152 and 153: Mechanical Anchors 152 SLEEVE-ALL
Page 154: Mechanical Anchors 154 Drop-In Anch
Page 158 and 159: Mechanical Anchors 158 DROP-IN Tech
Page 160:
Mechanical Anchors 160 BLUE BANGER
Page 167 and 168:
Page 169 and 170:
Page 176 and 177:
Mechanical Anchors 176 HWA Hollow W
Page 178 and 179:
Mechanical Anchors 178 SWTB Spring
Page 180 and 181:
Gas-Actuated Fastening System 180 G
Page 182 and 183:
Gas-Actuated Fastening System 182 G
Page 184 and 185:
Powder-Actuated Fastening Systems 1
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 210 and 211:
Page 212 and 213:
212 CARBIDE DRILL BITS, CORE BITS &
Page 214 and 215:
Drill Bits 214 SDS-PLUS ® SDS-PLUS
Page 216 and 217:
Drill Bits 216 SPLINE/STRAIGHT SHAN
Page 218 and 219:
Drill Bits 218 DEMOLITION BITS For
Page 220 and 221:
Drill Bits 220 DRILL BIT WARRANTY C
Page 222 and 223:
222 GLOSSARY OF COMMON TERMS OBLIQU
Page 224 and 225:
224 C-SAS-2009 © 2009 SIMPSON STRO
Page 226 and 227:
226 C-SAS-2009 © 2009 SIMPSON STRO
Page 228 and 229:
Anchor Selection Software Anchor De
Page 230 and 231:
NCHORING
Page 232 and 233:
4 Anchoring and Fastening Systems f
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
10 Anchoring and Fastening Systems
Page 240 and 241:
Page 242 and 243:
Page 244:
Page 247 and 248:
F-SAS-CSAS2009 ©2011 Simpson Stron
Page 249:
Page 252 and 253:
Page 254 and 255:
26 W Anchoring and Fastening System
Page 256 and 257:
N N 28 W Anchoring and Fastening Sy
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
show all

Simpson Anchors - Anchoring and Fastening Systems - BuildSite.com

Create successful ePaper yourself

Delete template?

Save as template?