22 AFH FD Force – Displacement software for force measurement systems Premium evaluation software 2 1. Force Measurement Unit: 2. Length (Displacement) Measurement Unit: 3. Junction Box: 4. PC AFH FD software is designed for all applications that require the measurement of forces, depending on the displacement. Typically these are force progression graphs in penetrations tests or pullout tests. www.sauter.eu 3 SAUTER FH series (not included) Included in AFH-FD Included in AFH-FD (not included) These are the main characteristics of AFH FD: Univsersal and easys application – The software only requires: – SAUTER FH series force gauge – SAUTER LA series length meter As soon as these components can be used, the AFH-FD Force-displacement software can be adopted to any test stand, any type of machine or moving device. – Quick data transfer speed: up to 20 sets of data per second The measured data, captured in the AFH FD software can be stored, printed or can be exported to Excel for further analysis... 4 1 Output format .XML (MS Excel). Connectable cables (RS 232 cable is included) RS 232 / USB Optional: RS 232 to USB (converter unit) SAUTER AFH 12: € 85,– netto Model Price, excl. VAT AFH FD € 650,–
Warranty 24 Months Clamps & Individual Solutions Attachements, etc. Pin Vice: Tension, Fracture, Insert/ Withdraw Force Measurement, 2 pieces AC 01, net € 90,– Ball shaped Head: Test tensile & Pressure strength, up to 5 kN, 3 pieces AC 02, net € 55,– Thin Film Grip: Tension, fracture, Insert/ Withdraw up to 5 kN, 2 pieces) AC 03, net € 105,– Wedge grip for tensile tests for heavy duty use up to 5 kN, 1 piece AC 04 (up to 5 KN), net € 330,– AC 37 (up to 10 KN), net € 600,– Parallel jaw grip push or pull tests up to 5 kN, 2 pieces AC 12, net € 75,– Fine point clamp, push or pull tests up to 500 N, width: 15 mm, 2 pieces AC 14, net € 55,– Wheel attachement up to 200 kN, tensile test of components e.g. cable & plug, 1 Set AC 07, net € 345,– Pressure Disc, Compression & Fracture Measurement up to 5 kN, ø 49 mm, 2 pieces AC 08, net € 55,– Grip Clamp, tension measurement up to 5 kN, 2 pieces AC 09, net € 85,– Metal plate for FH external Sensor up to 5 KN, 85 mm diameter, 2 pieces AFH 06, net € 55,– Broad clamp with quick opening device width: 30 mm, up to 500 N, 2 pieces AC 22, net € 85,– Stainless steel handle bar with rubber grip for FH remote sensor, 1 piece AFH 05, net € 55,– Large variety of clamps and grips Please enquire also for individual solutions for special designs Cable fixture, Tension & Fracture, all kinds of cables up to 5 kN, 2 pieces AC 10, net € 105,– Rolling-clamp, Tension, Fracture Force up to 5 kN, 2 pieces AC 11, net € 105,– 1-jaw-clamp, tension, peeling Force measurement up to 5 kN, 2 pieces AC 13, net € 75,– Ring-Fixture, tension and fracture measurement up to 500 N, 2 pieces AC 15, net € 40,– Heavy-duty-clamp, push and pull tests up to 5 kN, 2 pieces AC 16, net € 105,– Long clamp, light clamp specialised in Low-load tests up to 50 N, 2 pieces AC 17, net € 90,– 2-jaw-grip, tension & fracture tests up to 5 kN, 2 pieces AC 18, net € 105,– Cylinder Top, Test tensile strenght of springs up to 5 kN, 2 pieces AC 19 net € 115,– „Tuning Forc“ (joint device such as the keyboard carrier), up to 5 kN, 1 piece AC 20, net € 85,– Heavy-duty-grip for Pulltests, 1 piece AC 31 (up to 5 KN), net € 330,– AC 32 (up to 10 KN), net € 800,– Low profile clamp for Pulltests up to 500 N, esp. for Wheel balancing. 1 piece AC 33, net € 90,– Stainless steel handle bar with rubber grip for safe handling, 1 piece for FA, FH, AFH 04 net € 75,– FT, AFT 02 net € 75,– FK, AFK 02 net € 75,– www.sauter.eu 23