19.01.2013 Views

pa1778data.pdf

pa1778data.pdf

pa1778data.pdf

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

•<br />

U.S. STEEL DUQUESNE WORKS<br />

HAER No. PA-115<br />

(Page 93)<br />

19*-0" high underground concrete basin has a capacity of 110,900<br />

gallons. Two 2400 gpm Wilson-Snyder vertical pumps are located<br />

above ground over the hotwell. A 200 hp U. s. Electrical Titan<br />

Line motor rated at 1185 rpm powers each pump.<br />

Construction and Installation Date: 1980.<br />

Q. Non-Evaporative Spray Water Well and Spray Water Pumps:<br />

Located adjacent to the gas cooler hotwell on its northern side<br />

is the spray water well for the non-evaporative water treatment<br />

recycle system. It is composed of 184,000 gallon capacity<br />

underground concrete basin measuring 32 , -6" wide x 40 f -0" long x<br />

19t-0" high. Sluice gates divide the basin into three cells, a<br />

gas washer spray water cell, a gas cooler spray water cell, and a<br />

standby cell. Three 7000 gpm Wilson-Snyder vertical pumps are<br />

located above ground over each cell. Each pump is powered by a<br />

150 hp U. S. Electrical Titan Line motor rated at 1180 rpm.<br />

Construction and Installation Date: 1980.<br />

R. Non-Evaporative Cooling Tower: The cooling tower for the<br />

non-evaporative water treatment recycle system is located<br />

adjacent to the gas washer hotwell, gas cooler hotwell, and spray<br />

water well on their eastern side. Manufactured by Resorcon Inc.,<br />

it is composed of two wet surface air coolers: one for gas washer<br />

water and one for gas cooler water. Each unit is made up of four<br />

cells sandwiched between two shell and tube type heat exchangers.<br />

The fans at each cell, manufactured by the Tuf-Lite Company, are<br />

each powered by a 60 hp Reliance Duty Master motor rated at<br />

890/1775 rpm. The capacity of the gas washer unit is 3000 gpm.<br />

The capacity of the gas cooler unit is 2400 gpm. Both units are<br />

designed for an inlet temperature of 125 degrees F. and an outlet<br />

temperature of 90 degrees F.<br />

Installation Date: 1980.<br />

S- Dorothy Six Chemical Dispersant Building and Associated<br />

Chemical Feed Equipment: Constructed of cinder block and set on a<br />

concrete foundation, the 16*-0" wide x 20'-8" long x 10*-8" high<br />

chemical dispersant building for the non-evaporative water<br />

treatment recycle system is located just north of the gas cooling<br />

tower at Dorothy Six. Three chemical storage tanks, two with a<br />

capacity of 1000 gallons and one with a capacity of 560 gallons,<br />

are located within the building. The chemical feed pumps which<br />

were associated with each tank have been removed.<br />

Construction and Installation Date: 1979.<br />

T. Non-Evaporative control Building and Associated Chemical<br />

Storage Tanks: Located just north of the non-evaporative cooling<br />

tower, the two story control building is 28*-0" wide x 68'-0"<br />

long. Constructed of cinder block, it is set on a concrete<br />

foundation. The main control panel for the non-evaporative water

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!