System Description RIO / microLine
System Description RIO / microLine
System Description RIO / microLine
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Expansion Modules<br />
Gateway for Operator Panels <strong>RIO</strong> GATEWAY COP<br />
Slide contacts<br />
for internal bus<br />
Supply voltage:<br />
+24 VDC<br />
54<br />
0 VDC<br />
PE<br />
RS232<br />
interface for<br />
programming<br />
Supply voltage<br />
COP:<br />
+24 VDC<br />
0 VDC<br />
The <strong>RIO</strong> GATEWAY COP module provides the interface between the COP<br />
operator panel and the COP bus coupler. The operator panel is connected<br />
by a 16-pin adapter cable (COP K2-1) to terminal rows X1, X2, X3 and the<br />
power supply. Configured operator dialogs can be loaded from a PC to the<br />
operator panel via the RS232 interface (9-pin subminiature connector) on the<br />
top of the module. The <strong>RIO</strong> GATEWAY COP can only be operated with a<br />
COP bus coupler (→ page 30).<br />
PE<br />
Note<br />
Technical data <strong>RIO</strong> GATEWAY COP<br />
Article number R5.364.0180.0<br />
Inputs/outputs X1.0 ... X1.7 RS422 / RS232 from COP<br />
X2.0 ... X2.7 Enabling button / Emergency stop COP<br />
X3.0 ... X3.7 Dead man's contacts / Emergency stop<br />
External supply voltage DC 24 V (±20%, max. 5% residual ripple)<br />
For general technical data see page 68<br />
For further information on COP gateway<br />
and bus couplers please refer to the "COP<br />
handy / COP touch" manual<br />
(→ page 67).<br />
<strong>System</strong> <strong>Description</strong> <strong>RIO</strong> / <strong>microLine</strong>
Change language