System Description RIO / microLine
System Description RIO / microLine System Description RIO / microLine
Expansion Modules Counter Module RIO C24-10 Slide contacts for internal bus 48 Inputs/outputs X1.0 ... X2.7 Voltage output 24 V X2.21/X2.22 Supply voltage: +24 V DC 0 V DC Contacts for internal bus Channel monitoring (yellow: cursor, green: status) Potential relaying: +24 V DC 0 V DC The RIO C24-10 expert module provides up to 4 mutually independent up/ down counters. They count clock pulse signals. Other inputs can be used to control counting, alter the counting direction and reset the counter. The counter value is compared with up to two thresholds. If the value exceeds or falls below the threshold the outputs switch. • Choice of two 32-bit counters or four 16-bit counters • Counting range 0 to 2 32 -1 or 0 to 2 16 -1 • Counting frequency up to 200 kHz • 32-bit counter has comparison with two threshold values • 16-bit counter has comparison with one threshold value • 24 V DC inputs / outputs • Counting controlled via gate signal • Two clock generators can be connected per counter (up/down) The counter module can handle five different input types: • Clock pulse+ (incrementer pulses, counter is incremented on rising signal edge) • Clock pulse- (decrementer pulses, counter is decremented on rising signal edge) • Gate (as long as the gate signal is active, the counter is active) • Direction (as long as the direction signal is active, the counter direction is reversed) • Reset (as long as the reset signal is active, the counter is reset) Each counter has three inputs. The first two are connected to Clock pulse+ and Gate enable, the third to one of the remaining types (Clock pulse-, Direction, Delete). The result is three input combinations, which make optimal use of the available channels and cover all the usual applications. The counter module is configured by a PLC via the bus coupler, or directly by the microLine PLC. This means it can easily be adapted for its application. Block diagram System Description RIO / microLine
Technical Data RIO C24-10 Article number R5.364.0170.0 Number of inputs/outputs 12 inputs, 4 outputs Number of counters / counter width 2 x 32-bit or 4 x 16-bit Expansion Modules Data width 10 bytes at 2 x 32 bit or 4 x 16 bit 6 bytes at 1 x 32 bit or 2 x 16 bit Method Once to end value (min. or max. value) Counting frequency Max. 200 KHz, interference suppression settable 200 Hz, 2 KHz, 20 KHz, 200 KHz Range 0 ... 232 –1 or 0 ... 216 –1 External supply voltage DC 24 V (±20%, max. 5% residual ripple) Power consumption Inputs 0.25 W (without input current/load current) from external 24 V supply 1.1 W from internal 5 V supply Switching level H level +15 ... +30 V L level –30 ... +5 V Input current Min. H level (+15 V) ≥ 3.5 mA Max. L level (+5 V) ≤ 1.0 mA Typ. (+24 V) = 7.5 mA Simultaneity 100% Signal delay
- Page 1 and 2: RIO Field Bus System / microLine PL
- Page 3 and 4: 57 58 59 60 61 63 64 65 65 66 66 67
- Page 5 and 6: Components in the RIO System microL
- Page 7 and 8: ... and in the Detail Spring-Loaded
- Page 9 and 10: Simply Faster - CANopen PCS What is
- Page 11 and 12: Systems at a Glance DeviceNet is a
- Page 13 and 14: microLine PLC Controller microLine
- Page 15 and 16: Technical Data MCS 20-21R MCS 20-20
- Page 17 and 18: Technical Data MCS 20-11R MCS 20-10
- Page 19 and 20: RIO Bus Couplers The bus coupler co
- Page 21 and 22: Functions on the BC Bus Coupler It
- Page 23 and 24: Bus Couplers Bus Coupler • EC •
- Page 25 and 26: Bus Couplers Bus Coupler • EC •
- Page 27 and 28: Bus Couplers Bus Coupler • EC •
- Page 29 and 30: Bus Couplers Bus Coupler • EC •
- Page 31 and 32: Bus Couplers Bus Coupler • EC •
- Page 33 and 34: RIO Expansion Modules Digital and a
- Page 35 and 36: Expansion Modules Digital • 16 In
- Page 37 and 38: Expansion Modules Digital • 16 Ou
- Page 39 and 40: Expansion Modules Digital • 4 Out
- Page 41 and 42: Expansion Modules Digital • 8 Inp
- Page 43 and 44: Expansion Modules Analog • 4 Inpu
- Page 45 and 46: Expansion Modules Analog • 4 Inpu
- Page 47: Expansion Modules Temperature Modul
- Page 51 and 52: Technical Data RIO P24-10 RIO P05-1
- Page 53 and 54: Technical data RIO A10-10 Article n
- Page 55 and 56: System Description RIO / microLine
- Page 57 and 58: RIO Compact I/O Our digital compact
- Page 59 and 60: Compact I/O Digital • 16 Inputs
- Page 61 and 62: Compact I/O Digital • 8 Inputs
- Page 63 and 64: Software • Multiprog • Prodoc U
- Page 65 and 66: Software Programming Software Prodo
- Page 67 and 68: Accessories Cables, Connectors, Sma
- Page 69 and 70: Dimensions Bus Couplers BC microLin
- Page 71 and 72: Always There for You Schleicher sta
Technical Data <strong>RIO</strong> C24-10<br />
Article number R5.364.0170.0<br />
Number of inputs/outputs 12 inputs, 4 outputs<br />
Number of counters / counter width 2 x 32-bit or 4 x 16-bit<br />
Expansion Modules<br />
Data width 10 bytes at 2 x 32 bit or 4 x 16 bit<br />
6 bytes at 1 x 32 bit or 2 x 16 bit<br />
Method Once to end value (min. or max. value)<br />
Counting frequency Max. 200 KHz, interference suppression settable 200 Hz, 2 KHz, 20 KHz, 200 KHz<br />
Range 0 ... 232 –1 or 0 ... 216 –1<br />
External supply voltage DC 24 V (±20%, max. 5% residual ripple)<br />
Power consumption<br />
Inputs<br />
0.25 W (without input current/load current) from external 24 V supply<br />
1.1 W from internal 5 V supply<br />
Switching level H level +15 ... +30 V<br />
L level –30 ... +5 V<br />
Input current Min. H level (+15 V) ≥ 3.5 mA<br />
Max. L level (+5 V) ≤ 1.0 mA<br />
Typ. (+24 V) = 7.5 mA<br />
Simultaneity 100%<br />
Signal delay