System Description RIO / microLine

Expansion Modules
Expansion Modules
Terminal Extension RIO KE 16
34
Potential
distributor 1
(10 terminals)
Potential
distributor 2
(10 terminals)
The RIO KE 16 Terminal Extension can be plugged onto any expansion module.
It offers two additional jumper levels for potential distribution. This means that
all modules can be connected to four-wire systems.
Technical Data RIO KE 16
Article number R5.368.0020.0
Number of inputs/outputs 2 distributors (isolated) each with 10 terminal connections
Input/output current per terminal max. 8 A
For general technical data see page 68
Spring-Loaded Clamping Key System
The spring-loaded clamping key system of the terminals
on the RIO modules makes for simple fast wiring. The
spring is pre-tensioned by pressing in the clamping key.
The clamping space is open. Insert the cable and push the
clamping key up. Finished. The spring terminals guarantee
vibration-resistance and constant clamping force.
To close the terminal
Insert cable
Push clamping
key up
Finished
To open the terminal
Push in
clamping key
Remove cable
System Description RIO / microLine