download a copy here! - Coburn

Milking Equipment
LLRC
CONTROL
MOISTUREPROOF
WATER RESISTANT
Receiver Group
Components
Stock No.
PLASTIC
MOISTURE TRAP
Description
175-0018 3-Gallon Molded Plastic Moisture
Trap with S.S. Bend. Wt. 17 lbs.
175-0016 Same Trap without S.S. Bend
Replacement Parts:
175-0010 Molded Trap Body only
175-0011 4.25” Adapter Sleeve
175-0012 3.75” Adapter Sleeve
175-0013 4” Trap Ball
175-0015 Clean out Cap Assembly
175-0017 S.S. Bend only, 135˚, 3”
LIQUID LEVEL PROBE &
CONTROL
dual voltage 115/230VAC
BW1615 1.5” Liquid Level Probe
& Control, solid state
BW1620 2” Liquid Level Probe
and Control, solid state
LLP15 1.5” Probe only
LLP20 2” Probe only
LLRC Control only, 115/230VAC
LLRB Replacement board only
EX021892AReplacement board for
other 3-prong controls
EX100592BReplacement board for
Surge 2-prong control
18-Month Limited Warranty
on Control Boards
VACUUM DRAIN VALVE
AVD4 4” Vacuum Operated Drain Valve
(As shown; hose & fittings not included.)
8200020 Repl. Gasket for Drain Valve
The Flex-Coupler is a 2” plastic coupler, complete with bushing and gaskets, for milk
line to receiver jar connections. It works equally well on glass to glass and glass to
stainless connections. (Not recommended for stainless to stainless.)
Flex-Coupler’s unique poly complex construction is durable, sanitary,and easy to
twist apart without breaking the glass line. Poly expands and contracts naturally over
a wide range of temperatures for optimum seal and minimal distortion.
J2000 Flex Coupler complete
J2010 Replacement Gasket
38
LIQUID
LEVEL
PROBE
®
Flex Coupler
Gasket
COVER
TRAP
BODY
120122
Clamp / Thread
J-BENDS
Clamp / Clamp
CLIP
OPTIONAL
DUCKBILL DRAINS
Clamp / Clamp
BALL
120124
STAINLESS STEEL
MOISTURE TRAP
Stock No. Size & Type
6QMT 6 qt. Moisture Trap with 2 - 2”
threaded inlets. Wt. 3.25 lbs.
12QMT 12 qt. Moisture Trap with 2 -
3” threaded inlets. Wt. 6 lbs.
Replacement Parts:
6QTB 6 qt. Trap Body
12QTB 12 qt. Trap Body
12QTBX 12 qt. Trap Body without
drainage hole
1047 Gasket for 6 qt. Cover
6 3/8” by 7 7/8”
12QMTG Gasket for 12 qt. Cover
8 5/8” by 9 3/4”
MTC20 Cover only for 6 qt. Trap
MTC30 Cover only for 12 qt. Trap
MTB20 Ball only for 6 qt. Trap
(2.5” diameter)
MTB40 Ball only for 12 qt. Trap
(4” diameter)
6QMTCC Cover Clip for 6 qt. Cover
12QMTCC Cover Clip for 12 qt. Cover
120122 Duckbill Drain
120124 Heavy-Duty Duckbill Drain
HORIZONTAL
STAINLESS STEEL
MOISTURE TRAPS
175-0006 12” X 24” Trap complete,
3” clamp X 3”NPT. 29 lbs.
175-0009 12” X 24” Trap, complete,
4” clamp X 4”NPT. 29 lbs.
175-0007 Repl. Gasket, 12 1/4” X 13”
175-0008 Repl. Lid with Gasket
175-0013 Repl. 4” Trap Ball
STAINLESS STEEL
MOISTURE TRAP BENDS
Stock No. Size & Type
20JFT 2” J-Bend, clamp & thread
30JFT 3” J-Bend, clamp & thread
20JCC 2” J-Bend, clamp/clamp
30JCC 3” J-Bend, clamp/clamp
30UCC 3” U-Bend, clamp/clamp
30UWW 3” U-Bend, weld/weld
175-0014 4” U-Bend, clamp/clamp
CC21-2020 2” Adapter, clamp/thread
CC21-3030 3” Adapter, clamp/thread
U-BENDS
STAINLESS STEEL
Air Blow
Check
Valve
Weld / Weld
Air Blow Valve is designed to pressurize lines with air to purge out
milk or CIP solution. Valve is normally closed and uses air to open.
Comes with a 1.0 micron air filter disk and a 3/8”NPT female air
connection. 20 to 60 psi operating range. Use with 4730-06-99-12 Milk
Filter.
623-0001 Air Blow Check Valve, 1.5”. Wt. 1.56 lbs.
623-0002 Air Blow Check Valve, 2”. Wt. 1.67 lbs.
623-0003 Air Blow Check Valve, 2.5”. Wt. 1.83 lbs.
800-776-7042 Quality and Service Since 1925 www.coburn.com