STANDARDIZED TRAINING PACKAGES (STPs) CATALOGUE - ICAO
STANDARDIZED TRAINING PACKAGES (STPs) CATALOGUE - ICAO
STANDARDIZED TRAINING PACKAGES (STPs) CATALOGUE - ICAO
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
075/041/NDT Non-destructive Testing - Level<br />
2 Operator<br />
Centre: NCATO, Cairo, Egypt Version: 1<br />
Language of Instruction: English Duration: 4 weeks<br />
Purpose of the Course:<br />
This course will provide the trainees with the ability to design and carry out Non-Destructive Testing<br />
techniques, calibrate the used equipment, check the inspection requirements and decide the criteria to be<br />
accepted or rejected for any type of aircraft component.<br />
Objectives:<br />
- to be able to investigate, interpret and evaluate the existing defects in the component<br />
parts of an aircraft<br />
- to be able to report and certify results according to the prescribed techniques<br />
- to be able to supervise the work of Level 1 Operator<br />
- to be able to design and apply new NDT techniques<br />
- to be able to set up, calibrate, verify the accuracy of the equipment and make a diagnosis<br />
of the testing equipment<br />
Target Population:<br />
Maintenance Engineers and Technicians from the Egyptian Civil Aviation Authority (ECAA)<br />
Prerequisites:<br />
- B.Sc. In Aeronautical Engineering or other Engineering Diploma and at least one year’s<br />
experience as Level 1 Operator in the field<br />
or<br />
- High School and Basic Airframe & Powerplant Course (STG 073), plus one year’s<br />
experience as Level 1 Operator in the field of aircraft maintenance<br />
Course Content:<br />
The following instructional sequence is applied to each of four testing techniques (i.e., Dye Penetrant,<br />
Magnetic Particle, Ultrasonic, Eddy Current) taught in this course.<br />
1. Principles of Test<br />
2. Applied Procedures<br />
3. Material and Equipment Used<br />
4. Interpretation of Results of Test<br />
Duration of training for each technique is as follows:<br />
- Dye Penetrant (27h30)<br />
- Magnetic Particle (26h10)<br />
- Ultrasonic (28h30)<br />
- Eddy Current (29h00)<br />
TRAINAIR STP Catalogue / 28