18.01.2013 Views

Sensor systems 2 AS-Interface

Sensor systems 2 AS-Interface

Sensor systems 2 AS-Interface

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Issue date 2004-11-19 - Catalogue <strong>AS</strong>-<strong>Interface</strong> 2004/2005<br />

<strong>AS</strong>-<strong>Interface</strong> gateway<br />

Technical data<br />

General specifications<br />

<strong>AS</strong>-<strong>Interface</strong> specification<br />

Indicators/operating means<br />

V2.11<br />

LC display, two-digit address display, error message<br />

LED BUS ACTIVE PROFIBUS master detected; LED green<br />

LED <strong>AS</strong>-i ACTIVE <strong>AS</strong>-<strong>Interface</strong> operation normal; LED green<br />

LED CONFIG ERR configuration error; LED red<br />

LED PRG ENABLE autom. programming; LED green<br />

LED ENERGY voltage ON; LED green<br />

LED PRJ MODE projecting mode active; LED yellow<br />

LED U <strong>AS</strong>-i <strong>AS</strong>-<strong>Interface</strong> voltage; LED green<br />

Switch SET Selection and setting of a slave address<br />

Button MODE<br />

Electrical specifications<br />

Mode selection/save configuration<br />

Insulation voltage Ui ≥ 500 V<br />

Rated operational voltage Ue from <strong>AS</strong>-<strong>Interface</strong><br />

Rated operational current Ie ≤ 180 mA from <strong>AS</strong>-<strong>Interface</strong><br />

<strong>Interface</strong><br />

Protocol PROFIBUS<br />

<strong>Interface</strong> type RS 485<br />

Transfer rate<br />

Connection<br />

9.6; 19.2; 44.44; 93.95; 187.5; 500; 1500 kBit/s self-synchronising<br />

PROFIBUS RS 485 <strong>Interface</strong> and removable coded terminals<br />

<strong>AS</strong>-<strong>Interface</strong><br />

Ambient conditions<br />

removable coded terminals, Power Rail<br />

Ambient temperature 0 ... 55 °C (273 ... 328 K)<br />

Storage temperature<br />

Mechanical specifications<br />

-15 ... 75 °C (258 ... 348 K)<br />

Protection degree IP40 (housing), IP20 (terminals)<br />

Mass 420 g<br />

Software<br />

The device is supplied with the configuration data files (GSD) as well as a restricted version of<br />

the <strong>AS</strong>-i Control Tools software. The software performs the addressing, programming and<br />

monitoring of the <strong>AS</strong>-<strong>Interface</strong> network. The full version of the <strong>AS</strong>-i Control Tool is available<br />

as an accessory and features an expanded diagnostics monitor as well as a larger program<br />

memory for <strong>AS</strong>-<strong>Interface</strong> Control which makes it possible to detect faulty telegrams of slaves.<br />

A GSD file can be easily created for the PROFIBUS DP using the GSD assistant, whereby<br />

the size of the I/O windows can be conveniently adapted to the <strong>AS</strong>-<strong>Interface</strong> circuit's load and<br />

the <strong>AS</strong>-<strong>Interface</strong> configuration can be stored within the GSD file. A text file is also created,<br />

which documents the status of <strong>AS</strong>-<strong>Interface</strong> data in the gateway's I/O window.<br />

Note:<br />

The VAZ-PB-SIM accessory is required for the <strong>AS</strong>-i Control Tool.<br />

Function<br />

VBG-PB-KF-R4<br />

The VBG-PB-KF-R4 is a complete <strong>AS</strong>-<strong>Interface</strong><br />

master in accordance with <strong>AS</strong>-<strong>Interface</strong><br />

specification 2.11 in IP20. The design of this<br />

master is especially suitable for use in the<br />

switch cabinet. The KF cabinet housing of<br />

the PROFIBUS Gateway offers all the advantages<br />

of the serial master, such as Power<br />

Rail connections and coded, removable terminals.<br />

The VBG-PB-KF-R4 is a modular PROFI-<br />

BUS slave. This means that the user can use<br />

the PROFIBUS configuration tool to specify<br />

what data will be transferred via the PROFI-<br />

BUS. This makes it possible to adjust the<br />

amount of data to be transferred via PROFI-<br />

BUS.<br />

In addition, this gateway supports acyclical<br />

communication of the PROFIBUS DP V1.<br />

These acyclical services can be used to<br />

access a mailbox in the gateway that provide<br />

access to all the data that are made available<br />

by the <strong>AS</strong>-<strong>Interface</strong>/PROFIBUS Gateway.<br />

Two push buttons are used for address<br />

assignment, acceptance of the desired configuration<br />

and for adjustment of the PROFI-<br />

BUS address and baud rate. In configuration<br />

mode, all detected <strong>AS</strong>-<strong>Interface</strong> slaves are<br />

displayed on the 2-digit LCD. In normal operation,<br />

the LCD is blank unless the master<br />

detects a faulty <strong>AS</strong>-<strong>Interface</strong> slave. There are<br />

7 LEDs on the front panel, showing the current<br />

status of the <strong>AS</strong>-<strong>Interface</strong> line.<br />

Accessories<br />

VAZ-SW-ACT32<br />

Full version of the <strong>AS</strong>-i Control Tools<br />

VAZ-PB-SIM<br />

PROFIBUS master simulator<br />

UPR-E<br />

End cap for UPR-03 und UPR-05<br />

UPR-05<br />

Universal Power Rail with DIN rail and<br />

cover, 5 leads<br />

Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany<br />

Pepperl+Fuchs Group Tel.: Germany +49 621 776-0 USA +1 330 4253555 Singapore +65 67799091 Internet http://www.pepperl-fuchs.com 35<br />

Masters and<br />

Gateways<br />

Power Supplies,<br />

Extender, Repeaters<br />

Safety at work<br />

I/O Modules<br />

Control cabinet<br />

I/O Modules<br />

Field application<br />

Analogue modules<br />

Other modules<br />

Inductive sensors<br />

Photoelectric<br />

sensors<br />

Rotary encoders<br />

Accessories

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!