Sensor systems 2 AS-Interface

VAZ-DN-SIM-USB
Masters and
Gateways
Power Supplies,
Extender, Repeaters
Safety at work
I/O Modules
Control cabinet
I/O Modules
Field application
Analogue modules
Other modules
Inductive sensors
Photoelectric
sensors
Rotary encoders
Accessories
DeviceNet master simulator
Order code
VAZ-DN-SIM-USB
DeviceNet master simulator
Features
The DeviceNet master simulator is a
simple universal tool for data
exchange with DeviceNet slaves
Complete solution with hardware
(UART) and software
Description
312
Electrical connection
Sub-D connector
DeviceNet
1 2 3 4 5
6 7 8 9
Technical data
Electrical specifications
Rated operational current Ie ≤ 60 mA
Power supply draws its 5 V power from USB of the PC
Interface
CAN-H
CAN-L
VAZ-DN-SIM-USB
Interface type USB-PC-interface (USB-connector Serie A)
DeviceNet-interface with 9-pin sub-D connector (male)
Transfer rate 125, 250 und 500 kBit/s
Cable length max. 2 m
Ambient conditions
7
2
Ambient temperature 0 ... 55 °C (273 ... 328 K)
Storage temperature -25 ... 70 °C (248 ... 343 K)
USB connector
PC
The DeviceNet master simulator is a simple universal tool for data
exchange with DeviceNet slaves of almost all manufacturers. Without
any additional inputs or additional files, the input data can be read and
the output data can be written, and diagnostic functions can be displayed.
In addition, the DeviceNet master simulator can of course read and
write attributes. Moreover, there is also the possibility to search a complete
DeviceNet branch for subscribers connected.
The addresses and the Baud rate of the DeviceNet slaves can also be
set. The E/A data are displayed hexadecimally as well as in binary
mode
In single bit mode, it is possible to keep the outputs set for as long as
the mouse key is pressed. The device identification is read out from
the DeviceNet slave and is displayed with the I/O data.
The scope of delivery of the DeviceNet master simulator comprises the
DeviceNet dongle. The DeviceNet dongle is the ideal interface converter
between a USB port (the parallel interface of the PCs) and
DeviceNet. The dongle is very compact and is provided with energy by
the USB (from the keyboard interface of the PC). For this reason, it is
highly suitable for mobile use on a laptop computer or notebook.
The requirements are an 80486 processor PC or higher; all Microsoft Windows versions are supported. The scope of delivery comprises the
DeviceNet Master Simulator software.
Note:
A terminator (120 Ohm) has to be connected to the end of the DeviceNet line.
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group Tel.: Germany +49 621 776-0 USA +1 330 4253555 Singapore +65 67799091 Internet http://www.pepperl-fuchs.com
µP
4
3
2
1
0 V
D+
D-
+5 V
1234
Issue date 2004-11-19 - Catalogue AS-Interface 2004/2005